Fwd: Re: Fwd: Kone Carbide product request -Carbide rod
---------- Forwarded message ---------
From:
Stanley-Konetool <sales1@konetool.com>Date: Mon, Jun 8, 2026 at 11:48 PM
Subject: Re: Re: Fwd: Kone Carbide product request -Carbide rod
To: Ivan Arevalo <
iarevalo@turnpack.com>
Dear Ivan,
Here attached Quotation for your reference
Both Virgin Material and Recycle material quotation inside.
Pls check which one you like better, the price is even better than last time.
If you have other items to get quote, pls let us know.
You can also let me know your shipping address for cost checking, and let us know which payment method you want.
Hope to get your order soon.
Best regards,
-----------------------------
|
|
|
Stanley Peng
Business Manager
Kone Carbide Tool Ltd.
|
|
------------------ Original ------------------
Date： 2026-06-06 00:52
Subject： Re: Re: Fwd: Kone Carbide product request -Carbide rod
Hi Stanley,
We found that 64mm length blanks could work for us as well. The same requirements as before (h6 tolerance, 45 degree chamfer on one end, surface grounded, and YG10x 10% cobalt grade), but just the 64mm length and 8mm diameter. What are the pricing and lead time for 100-200 blanks?
Dear Kim,
Thank you for your clarification.
We understand that the blank is only required as stock material, and your manufacturers will use it to make the cutters. That is totally fine. We will focus on supplying the carbide blank material according to your required size and grade.
Regarding the blank, we attached a catalog for your reference and wait for your update on the confirmed quantity and specific requirements such as carbide grade, tolerance, surface condition, or packing, please also let us know so we can make sure everything is correct before production.
Best regards,
-----------------------------
|
| Stanley Peng Business Manager Kone Carbide Tool Ltd. |
|
------------------ Original ------------------
Date： 2026-06-03 23:14
Subject： Re: Re: Fwd: Kone Carbide product request -Carbide rod
I understand there is an MOQ. I will check with my team and get back to you about getting an order in to receive a sample.
Yes, the blank is purely just stock material as we have manufacturers who have used the material to create cutters. I know your company is capable of this but due to the minimum and outdated information provided on the cutter tool, we prefer sending stock material to our manufacturers as they have cut tools for us in the past.
If any other questions please let me know.
Best,
Ivan
Dear Ivan,
Thanks for your email, 2 questions:
1. if to receive a finished sample of carbide burr according to the drawing -- Normally it has MOQ, if needed, I can check MOQ and price for your order. MOQ depends from 10-50pcs minimum. and after that everything ok, we can make a bigger order of 130pcs.
2. If for the blank, it will be just a piece of carbide blank material right? I am not quite understanding what the blank is for. Could you explain a little bit of it?
Pls kindly give us reply on the 2 questions above. So we can move on to next step Ivan.
Hope to hear from you soonest.
Best regards,
----------------------------- |
| Stanley Peng Business Manager Kone Carbide Tool Ltd. |
|
------------------ Original ------------------
Date： 2026-06-03 06:53
Subject： Re: Re: Fwd: Kone Carbide product request -Carbide rod
Is there an option to receive a sample of either the blank or the finished tool?
Yes, this is correct.
Dear Ivan,
Here comes to a changed drawing for the item you want, pls kindly confirm for sure it is the product that you want to inquire. so we can start the process.
1. Tungsten carbide material for the whole bit.
2. YG10X = ISO K20 grade
3. Quantity 130pcs for quotation.
Hope to hear from you soonest.
Best regards,
----------------------------- |
| Stanley Peng Business Manager Kone Carbide Tool Ltd. |
|
------------------ Original ------------------
Date： 2026-06-02 00:05
Subject： Re: Re: Fwd: Kone Carbide product request -Carbide rod
We would need around 130 tooling bits, but we would like to see if there is a price difference based on the order quantity.
The material the cutter works with is Kovar and Nickel Cobalt. We used a 10% cobalt carbide grade when ordered.
Let me know if more information is needed.
Best,
Ivan
Hi Stanley,
The only detail on the drawing that does not match is that the tin coating should be 1.1" long, not .315" that you have.
Dear Ivan,
Sorry let you wait long, here comes the final drawing according to yours, could you pls check and confirm?
If ok, then we will start the quotation process to move on. And pls tell us quantity of such tool you need.
Also can we know what working material will this tool deal with? So we can choose the right carbide grade for use.
Hope to hear from you soonest.
Best regards,
----------------------------- |
| Stanley Peng Business Manager Kone Carbide Tool Ltd. |
|
------------------ Original ------------------
Date： 2026-05-26 23:26
Subject： Re: Re: Fwd: Kone Carbide product request -Carbide rod
Hi Stanley,
Sorry for the late reply.
The tool's total length should be 63.5 mm.
thanks,
Ivan
Hi Ivan,
We lost a critical dimension in your drawing. what is the total length of the tool? Check picture below in yellow and hope to hear from you soon on the number:
Best regards,
----------------------------- |
| Stanley Peng Business Manager Kone Carbide Tool Ltd. |
|
------------------ Original ------------------
Date： 2026-05-21 07:49
Subject： Re: Re: Fwd: Kone Carbide product request -Carbide rod
Hi Stanley,
Sorry for the delayed response. This could work for us. I received the drawings for the cutter tool which I have attached below in both DXF and PDF formats. They may be incomplete, so please ask any questions about the tooling and I will try to respond as accurately as possible. We would like to see our options for receiving the completed tooling.
Additionally, how can we start the process for ordering, shipping, and receiving the tooling?
Best,
Ivan Arevalo
Dear Ivan,
Yes, if without drawing would be hard to quote, here comes the quotation for the carbide rods FYI. pls check.
There are difference
-1. Virgin Material and Recycle material for your choice.
-2. Different quantity for your choice.
Wait for your reply on these rods, anything, pls just tell us and we'd deal with it soonest.
Best regards,
----------------------------- |
| Stanley Peng Account Manager Kone Carbide Tool Ltd. |
|
------------------ Original ------------------
Date： 2026-05-11 23:26
Subject： Re: Re: Fwd: Kone Carbide product request -Carbide rod
Getting the drawings may be an issue because we are working with the old company our current company acquired. Could it possible to just get the raw material quoted?
Best,
Ivan A
Dear Ivan,
Thanks for giving us details of the carbide rods, pls wait for our quotation of the carbide rods.
Could you send us the drawing of the cutters you want? so we can add cutter into quotation too.
We wait for your reply on cutters to move on.
Thank you very much.
----------------------------- |
| Stanley Peng Account Manager Kone Carbide Tool Ltd. |
|
------------------ Original ------------------
Date： 2026-05-08 13:03
Subject： Re: Re: Fwd: Kone Carbide product request -Carbide rod
Hi Ivan
Thanks , we also can supply the finished cutter or tools , pelase send us the drawaing , then we will check , if we can do , we will quote you the both the rod and cutter
I will ask our manager Stanlery to serve you together
Thanks
----------------------------- |
| Felix Pre-sales KONE CARBIDE TOOL LTD Focus On Carbide Tools Supply Chain Integration ! |
|
------------------ Original ------------------
Date： 2026-05-08 05:02
Subject： Re: Fwd: Kone Carbide product request -Carbide rod
Hi Felix,
Nice to meet you as well. Yes, these will be used and turned into cutters. If we provided the proper drawings and documents, could it be possible to get quoted for both stock material and manufacturing them into cutters? That would be great, thanks.
Hi Ivan Arevalo Nice to meet you! , thanks so much for your enquiry about carbide rod 8x63.5mm , Yes , they are our regular supply products , our factory always manufacture various sizes of carbide rods . so Can I know the application of this carbide rod that you will purchase ? to make some tools or cutters ? because we would like to recommend the proper TC Grade .
After get your futher information , then we will quote you
Best regards
----------------------------- |
| Felix Pre-sales KONE CARBIDE TOOL LTD Focus On Carbide Tools Supply Chain Integration ! |
|
------------------ Original ------------------
Date： 2026-05-08 03:56
Subject： Fwd: Kone Carbide Product Inquiry
Name: Ivan Arevalo
Email:
iarevalo@turnpack.com Country: United States
Phone: 4808692308
Call or not: It’s okay.
Company: Turnpack
Product Name: Carbide Rods
Message: I used the wrong email in the last request. I was requesting quotation regarding the pricing of approximately 130 solid round carbide blanks, 8mm in diameter and 63.5mm in length. If pricing changes with quantity, we would like to know options as well. We are located out in Queen Creek, Arizona if shipping is involved with the quotation process. Any information would be appreciated, thanks!
---
Date: May 7, 2026
Time: 5:26 pm
Page URL:
https://konecarbide.com/carbide-rods/ User Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/
148.0.0.0 Safari/537.36
Remote IP: 70.184.110.153
von
Ivan Arevalo
-
11:42 - 9 Juni 2026
