Archive
Info Inbox
info@turnpack.com
-
Receipt for Your Order PO26351909
ReceiptBilled toTURNPACK LLC
6922 E VIA NORTHGATE STE 101
MESA AZ 85212Purchase Order PO26351909 Paid $76.55 Invoice 71273969 Invoice Date 9/2/26 Shipped toTurnpack LLC
6922 E Via Northgate Ste 101
Mesa AZ 85212Information About Your Payment Credit CardDateName on CardAmex Ending- 100410/7/26Turnpack LLCYour Account 438808000 Christopher Berger placed this order.Line Product Ordered Shipped Balance Price Total 1 2044T131 Black End Caps for 1.2" and 1.21" ID Round Cut-to-Length Shipping Tube, Packs of 25 2 Packs2 0 11.64 Per Pack23.28 2 2044T353 Round Cut-to-Length Shipping Tube, 1.2" ID, 48" Inside Length 5 Each5 0 3.85 Each19.25 Merchandise 42.53 Shipping 34.02 Total $76.55 Payment Received 10/7/26 (76.55) Balance Due $0.00 Packing List Shipped Weight Carrier Tracking 5036366-01 09/02/2026 2 lb UPS 1Z9293810105758827 Received by Turnpack 9/3/26. 5036366-02 09/02/2026 3 lb UPS 1Z9293810105758836 Received by Turnpack 9/3/26. Federal ID 36-1458720
von "McMaster-Carr" <invoice.reply@mcmaster.com> - 06:21 - 7 Okt. 2026 -
Receipt for Your Order PO26331889
ReceiptBilled toTURNPACK LLC
6922 E VIA NORTHGATE STE 101
MESA AZ 85212Purchase Order PO26331889 Paid $199.37 Invoice 70503989 Invoice Date 8/20/26 Shipped toTurnpack LLC
6922 E Via Northgate Ste 101
Mesa AZ 85212Information About Your Payment Credit CardDateName on CardAmex Ending- 100410/7/26Turnpack LLCYour Account 438808000 Christopher Berger placed this order.Line Product Ordered Shipped Balance Price Total 1 92125A281 18-8 Stainless Steel Hex-Drive Flat Head Screw, M8 x 1.25 mm Thread Size, 14 mm Long, Packs of 25 1 Pack1 0 16.17 Per Pack16.17 2 92125A052 18-8 Stainless Steel Hex-Drive Flat Head Screw, M2 x 0.4 mm Thread Size, 6 mm Long, Packs of 50 17 Packs17 0 9.60 Per Pack163.20 3 9262K519 Oil-Resistant Buna-N O-Ring, 1.5 mm Wide, 5.5 mm ID, Packs of 100 1 Pack1 0 7.69 Per Pack7.69 Merchandise 187.06 Shipping 12.31 Total $199.37 Payment Received 10/7/26 (199.37) Balance Due $0.00 Packing List Shipped Weight Carrier Tracking 4369609-01 08/20/2026 2 lb UPS 1Z9293810105193008 Received by Evon 8/21/26. Federal ID 36-1458720
von "McMaster-Carr" <invoice.reply@mcmaster.com> - 06:21 - 7 Okt. 2026 -
Receipt for Your Order PO26331887
ReceiptBilled toTURNPACK LLC
6922 E VIA NORTHGATE STE 101
MESA AZ 85212Purchase Order PO26331887 Paid $711.59 Invoice 70358677 Invoice Date 8/18/26 Shipped toTurnpack LLC
6922 E Via Northgate Ste 101
Mesa AZ 85212Information About Your Payment Credit CardDateName on CardAmex Ending- 100410/7/26Turnpack LLCYour Account 438808000 Christopher Berger placed this order.Line Product Ordered Shipped Balance Price Total 1 8885K862 High-Strength 7075 Aluminum Sheet, 1/8" Thick, 6" x 12" 1 Each1 0 23.02 Each23.02 2 9055K45 High-Strength 7075 Aluminum Bar, 1/2" Thick x 3" Wide, 2 Feet Long 1 Each1 0 185.56 Each185.56 3 9055K47 High-Strength 7075 Aluminum Bar, 1" Thick x 1" Wide, 3 Feet Long 1 Each1 0 126.95 Each126.95 4 5805T11 Clear Slippery High-Temperature FEP Film with Adhesive-Back, 12" x 12" x 0.0035" 1 Each1 0 23.41 Each23.41 5 5225K559 Push-to-Connect Tube Fitting for Air, Adapter, for 4 mm Tube OD, M3 x 0.5 mm Male Pipe 7 Each7 0 8.50 Each59.50 6 97310A127 Oversized Washer, 18-8 Stainless Steel, for M3 Screw Size, 9mm OD, 0.9mm to 1.1mm Thick, Packs of 100 1 Pack1 0 5.14 Per Pack5.14 7 4402K61 Corrosion-Resistant Muffler, M3 Thread Male 316 Stainless Steel Fitting 3 Each3 0 26.66 Each79.98 8 5225K781 Push-to-Connect Tube Fitting for Air, Long 90 Degree Elbow, for 4 mm Tube OD, M5 x 0.8 mm Male 9 Each9 0 9.12 Each82.08 9 5225K739 Push-to-Connect Tube Fitting for Air, 90 Degree Swivel Elbow, for 4mm Tube OD, M3 x 0.5mm Male 9 Each9 0 9.75 Each87.75 Merchandise 673.39 Shipping 38.20 Total $711.59 Payment Received 10/7/26 (711.59) Balance Due $0.00 Packing List Shipped Weight Carrier Tracking 4220822-02 08/18/2026 8 lb UPS 1Z9293810105075850 Received by George 8/19/26. 4220822-03 08/18/2026 6 lb UPS 1Z9293810105075869 Received by George 8/19/26. Federal ID 36-1458720
von "McMaster-Carr" <invoice.reply@mcmaster.com> - 06:21 - 7 Okt. 2026 -
Receipt for Your Order PO26331887
ReceiptBilled toTURNPACK LLC
6922 E VIA NORTHGATE STE 101
MESA AZ 85212Purchase Order PO26331887 Paid $56.46 Invoice 70419632 Invoice Date 8/19/26 Shipped toTurnpack LLC
6922 E Via Northgate Ste 101
Mesa AZ 85212Information About Your Payment Credit CardDateName on CardAmex Ending- 100410/7/26Turnpack LLCYour Account 438808000 Christopher Berger placed this order.Line Product Ordered Shipped Balance Price Total 10 50315K69 Firm Polyurethane Rubber Tubing for Air&water 4 mm ID, 6 mm OD, Clear Blue, 100 ft. Length 1 Each1 0 54.00 Each54.00 Merchandise 54.00 Shipping 2.46 Total $56.46 Payment Received 10/7/26 (56.46) Balance Due $0.00 Packing List Shipped Weight Carrier Tracking 4220822-01 08/19/2026 3 lb UPS 1Z6028360197453705 Received by Evon 8/20/26. Federal ID 36-1458720
von "McMaster-Carr" <invoice.reply@mcmaster.com> - 06:21 - 7 Okt. 2026 -
Receipt for Your Order PO26331889
ReceiptBilled toTURNPACK LLC
6922 E VIA NORTHGATE STE 101
MESA AZ 85212Purchase Order PO26331889 Paid $95.19 Invoice 70530768 Invoice Date 8/20/26 Shipped toTurnpack LLC
6922 E Via Northgate Ste 101
Mesa AZ 85212Information About Your Payment Credit CardDateName on CardAmex Ending- 100410/7/26Turnpack LLCYour Account 438808000 Christopher Berger placed this order.Line Product Ordered Shipped Balance Price Total 1 31705K641 Pressure Recording Film, 10-5/8" Long x 12" Wide x 0.007" Thick, 70 to 350 PSI 1 Each1 0 82.88 Each82.88 NotesChristopher Berger changed the purchase order number from 0820CBERGER to PO26331889 on August 20th.Merchandise 82.88 Shipping 12.31 Total $95.19 Payment Received 10/7/26 (95.19) Balance Due $0.00 Packing List Shipped Weight Carrier Tracking 4365273-01 08/20/2026 2 lb UPS 1Z9293810105181637 Received by Evon 8/21/26. Federal ID 36-1458720
von "McMaster-Carr" <invoice.reply@mcmaster.com> - 06:21 - 7 Okt. 2026 -
50GB Priority Data Added
You'll continue to receive high-speed service.
50GB Priority Data Added
You’re opted in to automatic top-ups, so we’ve added 50 of Priority Data. This ensures you continue to receive high-speed service without interruption.
Account Number ACC-DF-14516124-70534-39 Service Line Number SL-DF-14214845-37013-99 Current Limit (GB) 1050 Current Usage (GB) 1000 Automatic Top-Up (GB) 50 Top-Up Price $25.00 My Account
This message was sent to info@turnpack.com for account ACC-DF-14516124-70534-39.
Space Exploration Technologies Corp | 1 Rocket Road, Hawthorne, CA 90250
von "Starlink" <no-reply@starlink.com> - 03:37 - 7 Okt. 2026 -
FedEx Billing Online Payment Reference 59748063
FedEx payment scheduled. Log in to review. 
Payment Scheduled Dear christopher berger, An automatic payment has been scheduled for your FedEx account number ending in 6805 using payment profile TURNPACK PLATINUM.Log in to FedEx® Billing Online to review the invoices included in this payment. Invoice Number Amount 9-493-13853 107.92 USD Log in Thank you for your business, FedEx ©2026 FedEx. The content of this message is protected by copyright and trademark laws under U.S. and international law.
Review our privacy policy. All rights reserved.
This message has been sent by an auto responder system. Please do not reply to this message.
von "BillingOnline" <BillingOnline@fedex.com> - 03:18 - 7 Okt. 2026 -
Queen Creek, say hi to a great deal on Mobile
FREE Mobile service for loyal customers. View in browser 
866‑834‑1467 
AI-generated images and models shown. Queen Creek,
Say hi to a great deal on MobileWith your current Business Internet service, you can get one line of Spectrum Mobile® FREE for 12 months. Enjoy savings that matter on reliable mobile service that keeps you connected without limits, at no extra cost. Business Internet and EasyPay required. or explore Mobile Get mobile service built for small business 
Real savings for your bottom line • No contracts or hidden taxes • Save up to thousands of dollars with multi-line savings on 4+ lines • Phone Balance Buyout on up to 20 lines for up to $10K total or explore Mobile 
More value at no extra cost • Unlimited talk, text and data • Nationwide 5G and mobile hotspot data included • International texting from the US and while abroad Call 866‑834‑1467 or explore Mobile 
Limited-time offer; subject to change. Qualified Spectrum Business customers only (no outstanding Spectrum balance). Standard rates apply after promo period or service change. +$10/mo without EasyPay; +$5/mo for paper bills. Actual speeds (including wireless) vary and are not guaranteed. Activation fee additional; taxes and charges may apply. Installation fees are extra. FREE UNLIMITED MOBILE LINE applies to the first line only, with up to 12 months of bill credits. Devices not included; smartwatches and tablets don’t qualify. After 30GB of cellular data, speeds may slow during times of high demand; after 10GB of hotspot data, speeds reduced. Customers with four or more lines are not eligible. TO ACCESS 5G: 5G compatible phone and 5G service required. Not all 5G capable phones compatible with all 5G service. Speeds may vary. SPECTRUM BUSINESS PHONE BALANCE REIMBURSEMENT: 2–20 lines or $10,000 max/account. Covers remaining device balances for ported lines in good standing (90+ days); proof required. Excludes tablets and wearables. Limit one per account; restrictions apply. See spectrumbusiness.net/PBB for details. Terms and conditions apply, subject to change. Not available in all areas. Spectrum Business Internet and EasyPay required for Mobile service. Restrictions apply.
Unsubscribe | Privacy Policy | Manage Your Preferences
This message was sent by Spectrum Business, a brand of Charter Communications. Parts of this message may contain promotional information about Spectrum Business and its services. Please do not reply to this email as this email address is not monitored.
© 2026 Charter Communications, all rights reserved | 12405 Powerscourt Drive, St Louis, MO 63131
100726-EM-C
von "Cox is now Spectrum" <Cox@businesscontact.cox.com> - 02:48 - 7 Okt. 2026 -
Re: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667
Chris,We really need some information on this machine as it is critical for our process. Please help us understand delivery timeline ASAP.
Get Outlook for iOS
From: Castillo, Ricardo - MX <Ricardo.Castillo@am.spectrumcontrol.com>
Sent: Wednesday, 07 October 2026 10:55:32
To: Christopher Berger <cberger@turnpack.com>; info@turnpack.com <info@turnpack.com>; catchall@turnpack.com <catchall@turnpack.com>
Cc: Heredia, Roman - MX <Roman.Heredia@am.spectrumcontrol.com>; Langford, Nathan - US <Nathan.Langford@am.spectrumcontrol.com>
Subject: RE: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667Hi Chris
We have sent multiple inquiries over the past few months regarding the shipping status of our equipment but have not received a timeline. Don’t really know what is causing the delay for months.
Could you please take the time to provide a firm date of delivery?
Thank you
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, July 22, 2026 1:53 PM
To: Rodarte, Federico - MEX; Sosa, Rosa - MX
Cc: Castillo, Ricardo - MX; Ortega, Estela - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX; Velazquez, Kevin - MEX; info@turnpack.com; catchall@turnpack.com
Subject: RE: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Federico,
Yes, I am receiving your emails. I owe you an explanation and an apology.
I replied on Tuesday, July 21 confirming the shipment and install plan. I have since found that reply sitting in our own internal inbox - I hit reply on an internal copy of your message instead of the original, so it never left our system. That is on me. I also owe Rosa an answer from June 26 that I never sent, and I owe you the flight itinerary I promised. All of that is addressed below.
BUILD STATUS
The antistatic lid - the last outstanding hardware item - has been received and installed. The machine is complete. Remaining work is final functional testing before crating.
SCHEDULE
We are targeting shipment to WTS in El Paso by the end of this week, Friday, July 24. Being straight with you: there is a realistic chance it slips to Monday or Tuesday, July 27-28.
I am holding the week of July 27 to be on-site in Juarez for installation, commissioning, and operator training, with the week of August 3 as the fallback if the crate does not clear in time. I will send my flight itinerary as soon as the ship date is locked, and no later than Friday, July 24.
CUSTOMS DOCUMENTATION - ROSA
Rosa, on June 26 you asked for certificate of origin, value, and technical data sheet. That request went unanswered for far too long and I apologize. Attached:- Certificate of Origin (USMCA / T-MEC certification format)
- Commercial invoice showing declared value
- D5L6 Technical Data Sheet
Two things I need back from you to complete the certification of origin:- Spectrum Control de Mexico's RFC and registered address, for the importer block
- Confirmation of the 6-digit HS tariff classification your broker uses for this equipment
Please also tell me if your broker needs anything beyond these three documents. Since you noted clearance typically runs about two days with documents in hand, I want everything in your possession before the crate arrives at WTS rather than after.
SHIPMENT DETAILS
Shipping to your broker warehouse as previously confirmed:
Spectrum Control, De Mexico
C/O WTS Corporation Inc.
9540 Joe Rodriguez
El Paso, TX 79927
Crate dimensions and gross weight: TBD
The machine is 141 lbs and is a two-person lift, so no forklift is required once the crate is open.
Two asks so we can lock my on-site days precisely:- Confirm WTS receiving hours and whether they need advance notice of delivery
- Once it crosses, tell me the date it lands in Juarez. If it clears faster than expected I will move my trip up rather than have the machine sit.
INSTALLATION AND TRAINING - WHAT WE NEED FROM YOUR SIDE
Federico, you asked about this on June 22 and I did not answer it properly. The attached site preparation sheet has the full detail. The essentials:- Power: 110 V, 60 Hz, single phase, standard NEMA 5-15 outlet within reach of the rear panel. Your facility supply works as-is; no transformer or adapter is required. Please use a circuit separate from sensitive instrumentation, as the machine cycles motors frequently.
- Bench: solid, level, non-vibrating, rated 250 lbs or more
- Machine footprint: 24 in W x 22 in D x 14 in H
- Clear work area: roughly 30 in W x 24 in D x 26 in H, with room to rotate the machine for rear access
- ESD ground point at the bench, plus bench space for the particle-control vacuum unit
- In or adjacent to a microelectronics clean room; ambient at or below 40 C and 90 percent RH
No compressed air, nitrogen, or water is required - this is a dry process. No vent or exhaust either; the particle-control vacuum is a self-contained ULPA-filtered unit.
Plan on one to two days on site: uncrating and placement, power-up and commissioning, recipe setup on your parts, operator training on the new touchscreen interface, and basic maintenance and troubleshooting.
Please have ready:
- The operators and maintenance technicians who should attend, so we can schedule around your production
- Sample devices for process validation - at least two of each package type you intend to run
Please complete and return the site preparation sheet at your earliest convenience.
GOING FORWARD
Every update from me goes to this full distribution. If you do not hear back from me within one business day, call my cell at +1 (480) 273-4686 and I will pick up.
Ship date and itinerary to you by Friday.
Chris
Christopher Berger
Turnpack, LLC
Office: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | https://www.google.com/url?q=http://www.turnpack.com&source=gmail&ust=1784836118280000&sa=E
6922 E Via Northgate, Suite 2, Mesa, AZ 85212On Wed, Jul 22, 2026 10:44 AM, "Rodarte, Federico - MEX" <Federico.Rodarte@am.spectrumcontrol.com> wrote:
Hi Christopher, good morning.
Are you receiving my E-mails?
Please confirm.
Thanks
From: Rodarte, Federico - MEX
Sent: Monday, July 20, 2026 7:05 AM
To: Christopher Berger
Cc: Info at Turnpack; LLC SO2524915 Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX; Velazquez, Kevin - MEX; Sosa, Rosa - MX
Subject: RE: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667Hi Christopher, good morning, can you please update and share status?
Thanks.
From: Rodarte, Federico - MEX
Sent: Monday, July 13, 2026 7:27 AM
To: Sosa, Rosa - MX; Christopher Berger
Cc: Info at Turnpack; LLC SO2524915 Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX; Velazquez, Kevin - MEX
Subject: RE: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667Hi Christopher, good morning, can you please update and share status?
Thanks.
From: Sosa, Rosa - MX <Rosa.Sosa@am.spectrumcontrol.com>
Sent: Friday, June 26, 2026 2:30 PM
To: Rodarte, Federico - MEX; Christopher Berger
Cc: Info at Turnpack; LLC SO2524915 Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX; Velazquez, Kevin - MEX
Subject: RE: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667Good afternoon,
We need certificate of origin, value, and technical data sheet.
Thanks.
From: Rodarte, Federico - MEX <Federico.Rodarte@am.spectrumcontrol.com>
Sent: Friday, June 26, 2026 2:25 PM
To: Christopher Berger; Sosa, Rosa - MX
Cc: Info at Turnpack; LLC SO2524915 Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX
Subject: RE: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667Thanks Christopher, Customs clearance usually takes no more than 2 days (Rosa Sosa to confirm timing and needs of information in advance).
Thanks
From: Christopher Berger <cberger@turnpack.com>
Sent: Friday, June 26, 2026 1:24 PM
To: Rodarte, Federico - MEX
Cc: Info at Turnpack; LLC SO2524915 Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Sosa, Rosa - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX
Subject: Re: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Federico,
The machine is built and the new control system is installed. Two things remain: we're finishing commissioning of that control system — the motion tuning, recipe setup, and final functional testing on the actual machine — and one last hardware item, the antistatic lid, which installs last and is due in early next week. This control system is the new Beckhoff platform that replaces the obsolete design, and I won't ship until it runs as needed on your floor. We are close to wrapping up.
Because I've given your team enough moving ship dates, I commit to what I control directly and can prove: I will be on-site at your plant to finish installation, commission the machine, and train your operators myself.
I am booking travel today to be on-site the week of July 27. I'll forward my flight itinerary once ticketed so you can see it's firm. The machine docks out ahead of that, and I'll send the exact ship date the moment it's crated.
One ask so we can lock my exact on-site days together: since your team handles the El Paso-to-Juarez importation through WTS, can you confirm your typical clearance and cross time from the broker? If the machine clears earlier than expected, I'll move my trip up — I'd rather be there the week of July 20th or 13th.
I will finish this last stretch correctly and close it out in person.
ChrisOn Thu, Jun 25, 2026 at 2:51 PM Rodarte, Federico - MEX <Federico.Rodarte@am.spectrumcontrol.com> wrote:
Hi Cristopher, any update?
Thanks
From: Rodarte, Federico - MEX
Sent: Monday, June 22, 2026 8:30 AM
To: 'Christopher Berger'
Cc: 'Info at Turnpack'; 'LLC SO2524915 Turnpack'; Castillo, Ricardo - MX; Ortega, Estela - MX; Sosa, Rosa - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX
Subject: RE: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667Hi Christopher, good morning, anxious to see this week update to stay on target 06/26?
Also asking what do you need from our side in regards of the “Installation and Training” plan?
Thanks, please advise…
From: Rodarte, Federico - MEX
Sent: Monday, June 8, 2026 9:23 AM
To: 'Christopher Berger'
Cc: Info at Turnpack; LLC SO2524915 Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Sosa, Rosa - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX
Subject: RE: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667Excellent, thanks!
From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, June 8, 2026 9:19 AM
To: Rodarte, Federico - MEX
Cc: Info at Turnpack; LLC SO2524915 Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Sosa, Rosa - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX
Subject: Re: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Hi Federico,
Attached is the updated project schedule. We are still on target for the 06/26 ship date. This week will be critical as we finalize motor integration testing. I will provide another update on Friday.
Chris
On Tue, May 19, 2026 at 6:19 AM Rodarte, Federico - MEX <Federico.Rodarte@am.spectrumcontrol.com> wrote:
Thanks for the update.
Regards
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, May 19, 2026 7:15 AM
To: Rodarte, Federico - MEX
Cc: Info at Turnpack; LLC SO2524915 Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Sosa, Rosa - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX
Subject: Re: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Federico,
Attached is the updated project schedule (Rev. 2) reflecting last Week's progress. Every long-lead item is confirmed and on plan:
- Beckhoff hardware: confirmed arrival this week
- Applied Motion motor: confirmed by 5/25
- Antistatic lid: ordered, 4-week lead, ships direct to AZ for final install
- Chicago Dial Indicators: confirmed arrival before 6/1
- Coatings: shipping to vendor this week
- CAD released for in-house parts, fabrication in progress
6/26/2026 ship to your WTS broker in El Paso remains the committed date.
Next update is Friday, 5/22, focusing on the Beckhoff bench code dev kickoff and the Applied Motion motor arrival.
Chris
On Mon, May 11, 2026 at 5:27 AM Rodarte, Federico - MEX <Federico.Rodarte@am.spectrumcontrol.com> wrote:
Hi Christopher, thanks for the detailed status.
Being a 6/26 a firm target date we will then NOT pursue the loaner, not to distract a 100% hand on in our machine.
We can wait until, just make sure that 6/26 is a final ETS.
Thanks
From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, May 11, 2026 6:08 AM
To: Rodarte, Federico - MEX
Cc: Info at Turnpack; LLC SO2524915 Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Sosa, Rosa - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX
Subject: Re: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Federico,
I told you Friday for the schedule. It's attached now instead. From this point forward you'll get answers ahead of the question.
Committed ship date to your WTS broker in El Paso: Friday, June 26, 2026.
The attached one-page schedule shows every workstream and milestone supporting that date. Quick summary of the path:- The original X-stage drive motor is obsolete and the supplier's last-time-buy did not materialize. We have redesigned the motion control around Applied Motion drive motors and a Beckhoff industrial PC with touchscreen HMI. This permanently eliminates the obsolescence risk and adds two capabilities the original Midas design did not have: touchscreen operation and recipe management.
- Beckhoff hardware arrives in-house this week, which lets us develop the PLC, HMI, and recipe code on the bench in parallel with mechanical assembly at our build partner's shop. On-machine integration is therefore compressed to one week of motion tuning and commissioning.
- All other components have been received, are on order with confirmed dates, or are moving through machining and coating this week.
I am chasing four items today and will close them out in Friday's update:
- Applied Motion supplier ship date confirmation
- Antistatic lid PO placement and lead time
- Chicago Dial Indicator items (PO26121668) confirmed ETA
- Beckhoff arrival confirmation upon receipt this week
Loaner system: there is no cost to Spectrum. Turnpack covers freight both directions and any duty. If you'd like the loaner shipped this week to bridge the gap until 6/26, confirm and we'll proceed. If not, all hands stay on your machine.
Cadence going forward: written status from me every Friday morning until ship, covering parts received that week, build and test progress, and any schedule change the moment we see it — not after you ask.
The communication gaps on this build were on me. The technical path is solid and you'll see that reflected in the weekly updates starting this Friday.
ChrisOn Thu, May 7, 2026 at 5:26 AM Rodarte, Federico - MEX <Federico.Rodarte@am.spectrumcontrol.com> wrote:
OK Christopher, thanks for replying.
Noted, will wait on tomorrow’s status to see gaps on supplying the new machine, after that will make a call if continue with a loaner or not. I mean if the new machine ETA is kind of within a couple of weeks, will wait… will see then by the new dates are available.
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, May 6, 2026 10:24 PM
To: Rodarte, Federico - MEX
Cc: Info at Turnpack; LLC SO2524915 Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Sosa, Rosa - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX
Subject: Re: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Federico,
You're right, and I owe you a straight answer rather than another general update.
I am not going to give you a ship date tonight that I can't stand behind. You will have one Friday morning, in writing, with the supporting milestones so you can hold us to it. Here is what I can confirm now:
- The X-stage drive motors used in the original Midas design are obsolete with no last-time-buy available. We have redesigned the motion control around Applied Motion motors/drives and a Beckhoff industrial PC with touchscreen HMI. This removes the obsolescence risk permanently and adds touchscreen operation and recipe management that the original Midas design did not have.
- Motors, drives, IPC and panel are all on order. Friday's update will include confirmed delivery dates from each supplier, the resulting ship date with float, and the build/test milestones in between.
- After Friday, you will receive a written status from me every Friday morning until the machine ships — parts received that week, build/test progress, and any schedule change the moment we see it, not after you ask.
Loaner: there is no cost to Spectrum. Turnpack covers freight both directions and any duty. If you want it shipped next week to bridge the gap, confirm and we'll proceed. If not, we'll put all hands on your machine.
The communication gaps on this build are on me. The technical path forward is sound and you'll see that reflected in the cadence starting Friday.
ChrisOn Tue, May 5, 2026 at 8:43 AM Rodarte, Federico - MEX <Federico.Rodarte@am.spectrumcontrol.com> wrote:
Hi Christopher, we, as customers want you to take the initiative to be one step ahead and to provide info not only when we asked for, which is what happens now.
We need our machine, upgraded or not, you committed to a quote and sell t, and pushed out time after time is causing us trouble to fulfill orders with our end customers.
Sounds like a “loaner system” will cause extra costs for us? If so, no, don’t want to go through.
With that said what is the new ETA FOR THE NEW MACHINE?
Please advise.
Get Outlook for iOS
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, May 5, 2026 9:05:33 AM
To: Rodarte, Federico - MEX <Federico.Rodarte@am.spectrumcontrol.com>
Cc: Info at Turnpack <info@turnpack.com>; LLC SO2524915 Turnpack <catchall@turnpack.com>; Castillo, Ricardo - MX <Ricardo.Castillo@am.spectrumcontrol.com>; Ortega, Estela - MX <estela.ortega@am.spectrumcontrol.com>; Sosa, Rosa - MX <Rosa.Sosa@am.spectrumcontrol.com>; Mata, Monica - MX <Monica.Mata@am.spectrumcontrol.com>; Castillo, Ivonne - MX <Ivonne.Castillo@am.spectrumcontrol.com>; Licon, Ana - MEX <Ana.Licon@am.spectrumcontrol.com>; Heredia, Roman - MX <Roman.Heredia@am.spectrumcontrol.com>
Subject: Re: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Hi Federico,
I didn't realize you wanted a loaner system but we started on preparing that go get it shipped to you early next week. I will keep you posted on this.
Regarding your machine we could not purchase more of the X-stage drive motors due to obsolescence even though the Sales Rep had originally indicated that we could make one last buy. We have been working to update the design and have placed orders for different motors that need integration. With the new design also includes a touchscreen and recipe management functionality which the current outdated version lacks.
Thanks
Chris
On Tue, May 5, 2026 at 5:26 AM Rodarte, Federico - MEX <Federico.Rodarte@am.spectrumcontrol.com> wrote:
Any feedback?
From: Rodarte, Federico - MEX
Sent: Thursday, April 30, 2026 8:53 AM
To: 'Christopher Berger'
Cc: Info at Turnpack; LLC SO2524915 Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Sosa, Rosa - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX
Subject: RE: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667Team Turnpack, Christopher, Lorena, the extended six weeks delay due this week.
Have not receive a “loaner system” since, yet would like to know what’s the ETA of our new machine is within next week having the extended six weeks already passed.
Please advise today.
Thanks
From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, March 23, 2026 11:12 AM
To: Rodarte, Federico - MEX
Cc: Info at Turnpack; LLC SO2524915 Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Sosa, Rosa - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX
Subject: Re: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Hi Federico,
Please accept my sincere apologies for the delayed response and the ongoing frustration this has caused your team.
We have received a further update regarding the supply chain issues for the Midas D5L6 De-Lidder (Ref SO2524915). Unfortunately, we are facing an additional six-week delay due to a custom component. Because this part is highly specialized, it cannot be sourced from an alternative vendor or replaced with a different component in a shorter timeframe.
We understand that you desperately need this equipment to meet your own customer commitments. To help bridge this gap, I am currently putting together a loaner system that we hope to ship by the end of this week. This should allow you to maintain operations while we finalize your specific machine.
I will provide a firm confirmation regarding the loaner shipment and a revised ETA for your unit as soon as possible. Thank you for your continued patience.
Best regards,
Chris Berger
On Mon, Mar 23, 2026 at 10:04 AM Rodarte, Federico - MEX <Federico.Rodarte@am.spectrumcontrol.com> wrote:
Team Turnpack, Christopher, Lorena, again and again looking for answers, at least a reply from someone in your Company that is taking care of business.
No one replies, what is the issue?, when you are going to provide feedback on the machine, not the “waiting on new components” but on the updated ETA?
Please advise or at least tell us who to contact if you’re not the right person to follow-up.
Thanks
From: Rodarte, Federico - MEX
Sent: Wednesday, March 18, 2026 8:26 AM
To: Info at Turnpack; Christopher Berger; LLC SO2524915 Turnpack
Cc: Castillo, Ricardo - MX; Ortega, Estela - MX; Sosa, Rosa - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX
Subject: RE: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667Hello, Christopher, Lorena.
We have been dealing with our end- Customer the delays on the equipment availability.
We do receive from you only status that you are waiting on components and promising status… but nothing comes after.
So… what is the status?, when is the new committed ETA while 3/15 did not occur?
Please advise.
Thanks
From: Info at Turnpack <info@turnpack.com>
Sent: Thursday, March 12, 2026 12:20 PM
To: Rodarte, Federico - MEX
Cc: Christopher Berger; LLC SO2524915 Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Sosa, Rosa - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX
Subject: Re: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Hello Team!
we are still waiting on delivery for a few more components. I am expecting to have more information by end of day tomorrow. Your patience is appreciated. thank you.
On Wed, Mar 11, 2026 at 8:39 AM Rodarte, Federico - MEX <Federico.Rodarte@am.spectrumcontrol.com> wrote:
Hello, Christopher, Lorena.
Any update?, 03/15 is this coming Sun/Mon 03/16…. Are we still on target?
Thanks
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, March 4, 2026 1:26 PM
To: Rodarte, Federico - MEX
Cc: LLC SO2524915 Turnpack; Info at Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Sosa, Rosa - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX
Subject: Re: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Hi Federico,
Thank you for checking in.
We are currently addressing a supply chain issue related to the cutter motor on the D5L6 De-Lidder. Normally we keep these motors in stock, however an unusually high volume of machine orders recently depleted our inventory.
We are actively working with the supplier to secure the next delivery and determine the exact timing. At the moment we are still targeting the March 15th delivery date, but we are waiting on final confirmation from the supplier.
I expect to have a firm update for you by this Friday and will send it as soon as I receive confirmation.
Thank you for your patience while we work through this.
Best regards,
Chris BergerOn Wed, Mar 4, 2026 at 12:33 PM Rodarte, Federico - MEX <Federico.Rodarte@am.spectrumcontrol.com> wrote:
Hi Christopher, trust me, before sending a message to you, I’ve checking first with Ms. Ivonne for status.
No update from Feb 20th. yet.
Since you had said that have some supply challenges we would like to know if March the 15th. still the ETA?
Please advise…. Thanks
From: Christopher Berger <cberger@turnpack.com>
Sent: Friday, February 20, 2026 6:47 PM
To: Rodarte, Federico - MEX
Cc: LLC SO2524915 Turnpack; Info at Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Sosa, Rosa - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX
Subject: Re: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Hi Federico,
Apologies for not sending a direct response to you but we have been updating Ivonne and I assumed you would be in touch with her.
We are working on supply chain challenges and will above if we encounter any delays.
Chris
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
On Fri, Feb 20, 2026, 4:31 PM Rodarte, Federico - MEX <Federico.Rodarte@am.spectrumcontrol.com> wrote:
Hello Turnpack team, Christopher, 3rd E-mail sent asking for assistance with no answer , tried also by phone and no answer. Can someone from Turnpack replies?, or who to contact in case you’re not responsible for Customer Service?
Thanks
Get Outlook for iOS
From: Rodarte, Federico - MEX
Sent: Monday, February 16, 2026 7:04:47 AM
To: Christopher Berger <cberger@turnpack.com>; LLC SO2524915 Turnpack <catchall@turnpack.com>; Info at Turnpack <info@turnpack.com>
Cc: Castillo, Ricardo - MX <Ricardo.Castillo@am.spectrumcontrol.com>; Ortega, Estela - MX <estela.ortega@am.spectrumcontrol.com>; Sosa, Rosa - MX <Rosa.Sosa@am.spectrumcontrol.com>; Mata, Monica - MX <Monica.Mata@am.spectrumcontrol.com>; Castillo, Ivonne - MX <Ivonne.Castillo@am.spectrumcontrol.com>; Licon, Ana - MEX <Ana.Licon@am.spectrumcontrol.com>; Heredia, Roman - MX <Roman.Heredia@am.spectrumcontrol.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667Hellos Turnpack team, good morning.
Sent you this E-mail Wednesday, have not receive a response, can you please check and advise at your earliest convenience?
Thanks
From: Rodarte, Federico - MEX
Sent: Wednesday, February 11, 2026 3:38 PM
To: Christopher Berger; LLC SO2524915 Turnpack; Info at Turnpack
Cc: Castillo, Ricardo - MX; Ortega, Estela - MX; Sosa, Rosa - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX
Subject: RE: Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667Hello Christopher, Turnpack team, can you please share an update of the ETA of the de-lidder?
Desperately needed to have it as soon as possible.
Thanks and appreciate your efforts to improve 03/15 targeted date if possible.
Federico Rodarte R – Mexico Operations
Spectrum Control, Inc
+1 915 592 2249 Xt 106
Federico.Rodarte@am.spectrumControl.com
From: Castillo, Ivonne - MX <Ivonne.Castillo@am.spectrumcontrol.com>
Sent: Friday, February 6, 2026 3:21 PM
To: Christopher Berger; LLC SO2524915 Turnpack
Cc: Info at Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Sosa, Rosa - MX; Rodarte, Federico - MEX; Mata, Monica - MX
Subject: RE: Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667Hi Chris.
The next week I’ll be on vacations so please help me to keep to all in copy for any update.
Thank you and have a good weekend!
Ivonne Castillo
MRO Purchasing
SPECTRUM CONTROL INC.
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, February 5, 2026 9:23 AM
To: Castillo, Ivonne - MX; LLC SO2524915 Turnpack
Cc: Info at Turnpack; Castillo, Ricardo - MX; Suarez, Juan - MEX; Sosa, Rosa - MX; Rodarte, Federico - MEX; Mata, Monica - MX
Subject: RE: Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Hi Ivonne,
I am on a business trip this week and a little behind. I will be in the office tomorrow and then send you an update.
Chris
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
On Thu, Jan 29, 2026 at 13:59 PM Ivonne - MX Castillo wrote:
Hello Chris,
Hope you’re doing well,
Are we still good with target Ship Date: March 15, 2026 ?
Please let us know.
Thank you and have a good afternoon!
Ivonne Castillo
MRO Purchasing
SPECTRUM CONTROL INC.
From: Christopher Berger <cberger@turnpack.com>
Sent: Friday, January 9, 2026 4:57 PM
To: Castillo, Ivonne - MX
Cc: Info at Turnpack; Castillo, Ricardo - MX; Suarez, Juan - MEX; Sosa, Rosa - MX; Turnpack, LLC SO2524915; Mata, Monica - MX
Subject: Re: Turnpack, LLC Quotation (Ref SO2524915) install & training in Mexico?IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Hi Ivonne,
This email confirms receipt of your order for the Midas D5L6 Delidder. We have initiated the project and are proceeding with execution on our standard, proven platform based on prior builds.
Below is the high-level project schedule for planning purposes. This build is largely procurement-, machining-, and assembly-driven, with limited engineering activity focused on BOM verification and minor drawing updates only.
High-Level Project Schedule (Subject to Material Lead Times)
- Requirements Confirmation & BOM Validation:
Final confirmation of scope, verification and cleanup of the existing BOM, and release for purchasing. - Purchasing & Machining:
Procurement of all purchased components and machining/fabrication of custom parts. Long-lead items will be tracked closely. - Build & Wiring:
Mechanical assembly of the machine and control panel build and wiring. - Integration & Testing:
Power-up, functional verification, and process testing. - Documentation, Crating & Delivery:
Final documentation package, crating, and shipment preparation.
Target Ship Date: March 15, 2026
We will communicate proactively if any supplier lead times impact this date. Otherwise, execution will proceed to support shipment on the target date above.
Please let us know if you have any questions or if additional coordination is needed.
Best regards,
ChrisOn Fri, Dec 19, 2025 at 4:56 PM Castillo, Ivonne - MX <Ivonne.Castillo@am.spectrumcontrol.com> wrote:
Hello Chris,
Thank you for your replied.
Please find PO attached for this shipment.
Hopefully, you can help us to improve lead time.
Thank you and have a good afternoon.
Ivonne Castillo
MRO Purchasing
SPECTRUM CONTROL INC.
From: Info at Turnpack <info@turnpack.com>
Sent: Friday, December 19, 2025 4:49 PM
To: Castillo, Ivonne - MX
Cc: Christopher Berger; Castillo, Ricardo - MX; Suarez, Juan - MEX; Sosa, Rosa - MX; Turnpack, LLC SO2524915; Mata, Monica - MX
Subject: Re: Turnpack, LLC Quotation (Ref SO2524915) install & training in Mexico?IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Hello Ivonne
Thank you for the inquiry. I do not see where a PO was sent for this to confirm the order.
Can you please forward to info@turnpack.com so we can get this moving for you?
Once received we can send a update on the lead-time.
Have a great day!
On Fri, Dec 19, 2025, 1:32 PM Castillo, Ivonne - MX <Ivonne.Castillo@am.spectrumcontrol.com> wrote:
Hello Chris,
Hope you’re doing well,
Would you help us to know about status of this SO2524915 delivery, please?
Thank you!
Ivonne Castillo
MRO Purchasing
SPECTRUM CONTROL INC.
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, November 4, 2025 8:52 AM
To: Castillo, Ivonne - MX
Cc: Info at Turnpack; Castillo, Ricardo - MX; Suarez, Juan - MEX; Sosa, Rosa - MX; Turnpack, LLC SO2524915; Ortega, Estela - MX; Mata, Monica - MX
Subject: Re: Turnpack, LLC Quotation (Ref SO2524915) install & training in Mexico?IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Hi Ivonne,
Yes, installation and training in Juarez Chihuahua, Mexico is provided with these line items. We will fly into El Paso and then probably need some advice from you on how to best cross the border and which hotel to stay in.
Chris
On Tue, Nov 4, 2025 at 8:07 AM Castillo, Ivonne - MX <Ivonne.Castillo@am.spectrumcontrol.com> wrote:
Good day Chris,
We are still waiting the response regarding if Install & Training is available here in Juarez Chihuahua, Mexico
Please let us know if not is available.
If service isn’t available, please help us to remove “install & Training” from quote and let us know how guarantee will be affected if we do the installation by ourself.
Thank you!
Ivonne Castillo
MRO Purchasing
SPECTRUM CONTROL INC.
From: Castillo, Ivonne - MX
Sent: Monday, November 3, 2025 7:51 AM
To: Info at Turnpack
Cc: Castillo, Ricardo - MX; Suarez, Juan - MEX; Sosa, Rosa - MX; Turnpack, LLC SO2524915; Ortega, Estela - MX; Mata, Monica - MX
Subject: RE: Turnpack, LLC Quotation (Ref SO2524915) help for update quote date.Good day Chris,
Information received. Thank you!
This location is our broker warehouse (we do all importation arrangements from there).
SHIP TO ADDRESS:
Spectrum Control, De Mexico
C/O WTS Corporation Inc.
Our location is in Juarez, Chihuahua. Mexico. so, regarding Install & Training, are you available to do it here in Mexico?
Please confirm.
Thanks again & have a great week!
Ivonne Castillo
MRO Purchasing
SPECTRUM CONTROL INC.
From: Info at Turnpack <info@turnpack.com>
Sent: Saturday, November 1, 2025 9:20 AM
To: Castillo, Ivonne - MX
Cc: Castillo, Ricardo - MX; Suarez, Juan - MEX; Sosa, Rosa - MX; Turnpack, LLC SO2524915
Subject: Re: Turnpack, LLC Quotation (Ref SO2524915) help for update quote date.IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Hello Ivonne,
Please see attached forms per your request.
Sales/Engineering
Contact name: Chris Berger
Address: 22425 S Scotland Ct 104
Email: cberger@turnpack.com
Phone number: 480.331.1878
Document Processing
Contact name: Lorena Carrillo
Address: 22425 S Scotland Ct 104
Email: info@turnpack.com
Phone number: 480.331.1878
On Fri, Oct 31, 2025, 10:11 AM Castillo, Ivonne - MX <Ivonne.Castillo@am.spectrumcontrol.com> wrote:
Hi Chris,
Received, Thank you!
Would you help us to provide information to do all arrangements for payment thru wire transfer, please?
Also, we need some information for your Company for uploaded in our supplier system. Would you help us to provide it please?
Contact name:
Address:
Email:
Phone number:
W9 form
and filled out attached form.
Thank you and Happy Halloween!
Ivonne Castillo
MRO Purchasing
SPECTRUM CONTROL INC.
From: Info at Turnpack <info@turnpack.com>
Sent: Friday, October 31, 2025 10:30 AM
To: Castillo, Ivonne - MX
Cc: Castillo, Ricardo - MX; Suarez, Juan - MEX; Sosa, Rosa - MX; Turnpack, LLC SO2524915
Subject: Re: Turnpack, LLC Quotation (Ref SO2524915) help for update quote date.IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Hi Ivonne,
Thanks for your email. I just resent the quote from our system. Please let us know if you have any questions.
Chris
On Thu, Oct 30, 2025 at 3:16 PM Castillo, Ivonne - MX <Ivonne.Castillo@am.spectrumcontrol.com> wrote:
Hello Chris,
Hope you’re doing well,
We have the purchase for the de-lidder authorized but quotation attached date now is expired.
Would you help us for update it please or can we use it anyway?
Please let us know
Thank you!
Ivonne Castillo
MRO Purchasing
SPECTRUM CONTROL INC.
From: Info at Turnpack <info@turnpack.com>
Sent: Tuesday, August 5, 2025 3:34 PM
To: Castillo, Ricardo - MX
Cc: Sosa, Rosa - MX; Castillo, Ivonne - MX; Turnpack, LLC SO2524915; Suarez, Juan - MEX
Subject: Re: Turnpack, LLC Quotation (Ref SO2524915) help for update quote date.IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Hi Ricardo,
Sorry about that. I kept looking for DSF6 and didn't see the mistake of D5F6. Attached is the updated quote.
Chris
On Tue, Aug 5, 2025 at 2:28 PM Castillo, Ricardo - MX <Ricardo.Castillo@am.spectrumcontrol.com> wrote:
Hi Chris
Cover page of quotation shows a D5F6, while the one we look for is a linear delidder not fiber one. We want a D5L6.
There might be an issue while approving our internal CER if we show a different model on cover than the one that is on next pages.
From: Info at Turnpack <info@turnpack.com>
Sent: Tuesday, August 5, 2025 3:25 PM
To: Sosa, Rosa - MX
Cc: Castillo, Ivonne - MX; Turnpack, LLC SO2524915; Suarez, Juan - MEX; Castillo, Ricardo - MX
Subject: Re: Turnpack, LLC Quotation (Ref SO2524915) help for update quote date.IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
HI Rosa,
I am not sure I follow. Where does it say DSF6?
Chris
On Tue, Aug 5, 2025 at 1:36 PM Sosa, Rosa - MX <Rosa.Sosa@am.spectrumcontrol.com> wrote:
von "Langford, Nathan - US" <Nathan.Langford@am.spectrumcontrol.com> - 12:02 - 7 Okt. 2026 -
RE: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667
Hi Chris
We have sent multiple inquiries over the past few months regarding the shipping status of our equipment but have not received a timeline. Don’t really know what is causing the delay for months.
Could you please take the time to provide a firm date of delivery?
Thank you
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, July 22, 2026 1:53 PM
To: Rodarte, Federico - MEX; Sosa, Rosa - MX
Cc: Castillo, Ricardo - MX; Ortega, Estela - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX; Velazquez, Kevin - MEX; info@turnpack.com; catchall@turnpack.com
Subject: RE: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Federico,
Yes, I am receiving your emails. I owe you an explanation and an apology.
I replied on Tuesday, July 21 confirming the shipment and install plan. I have since found that reply sitting in our own internal inbox - I hit reply on an internal copy of your message instead of the original, so it never left our system. That is on me. I also owe Rosa an answer from June 26 that I never sent, and I owe you the flight itinerary I promised. All of that is addressed below.
BUILD STATUS
The antistatic lid - the last outstanding hardware item - has been received and installed. The machine is complete. Remaining work is final functional testing before crating.
SCHEDULE
We are targeting shipment to WTS in El Paso by the end of this week, Friday, July 24. Being straight with you: there is a realistic chance it slips to Monday or Tuesday, July 27-28.
I am holding the week of July 27 to be on-site in Juarez for installation, commissioning, and operator training, with the week of August 3 as the fallback if the crate does not clear in time. I will send my flight itinerary as soon as the ship date is locked, and no later than Friday, July 24.
CUSTOMS DOCUMENTATION - ROSA
Rosa, on June 26 you asked for certificate of origin, value, and technical data sheet. That request went unanswered for far too long and I apologize. Attached:- Certificate of Origin (USMCA / T-MEC certification format)
- Commercial invoice showing declared value
- D5L6 Technical Data Sheet
Two things I need back from you to complete the certification of origin:- Spectrum Control de Mexico's RFC and registered address, for the importer block
- Confirmation of the 6-digit HS tariff classification your broker uses for this equipment
Please also tell me if your broker needs anything beyond these three documents. Since you noted clearance typically runs about two days with documents in hand, I want everything in your possession before the crate arrives at WTS rather than after.
SHIPMENT DETAILS
Shipping to your broker warehouse as previously confirmed:
Spectrum Control, De Mexico
C/O WTS Corporation Inc.
9540 Joe Rodriguez
El Paso, TX 79927
Crate dimensions and gross weight: TBD
The machine is 141 lbs and is a two-person lift, so no forklift is required once the crate is open.
Two asks so we can lock my on-site days precisely:- Confirm WTS receiving hours and whether they need advance notice of delivery
- Once it crosses, tell me the date it lands in Juarez. If it clears faster than expected I will move my trip up rather than have the machine sit.
INSTALLATION AND TRAINING - WHAT WE NEED FROM YOUR SIDE
Federico, you asked about this on June 22 and I did not answer it properly. The attached site preparation sheet has the full detail. The essentials:- Power: 110 V, 60 Hz, single phase, standard NEMA 5-15 outlet within reach of the rear panel. Your facility supply works as-is; no transformer or adapter is required. Please use a circuit separate from sensitive instrumentation, as the machine cycles motors frequently.
- Bench: solid, level, non-vibrating, rated 250 lbs or more
- Machine footprint: 24 in W x 22 in D x 14 in H
- Clear work area: roughly 30 in W x 24 in D x 26 in H, with room to rotate the machine for rear access
- ESD ground point at the bench, plus bench space for the particle-control vacuum unit
- In or adjacent to a microelectronics clean room; ambient at or below 40 C and 90 percent RH
No compressed air, nitrogen, or water is required - this is a dry process. No vent or exhaust either; the particle-control vacuum is a self-contained ULPA-filtered unit.
Plan on one to two days on site: uncrating and placement, power-up and commissioning, recipe setup on your parts, operator training on the new touchscreen interface, and basic maintenance and troubleshooting.
Please have ready:
- The operators and maintenance technicians who should attend, so we can schedule around your production
- Sample devices for process validation - at least two of each package type you intend to run
Please complete and return the site preparation sheet at your earliest convenience.
GOING FORWARD
Every update from me goes to this full distribution. If you do not hear back from me within one business day, call my cell at +1 (480) 273-4686 and I will pick up.
Ship date and itinerary to you by Friday.
Chris
Christopher Berger
Turnpack, LLC
Office: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | https://www.google.com/url?q=http://www.turnpack.com&source=gmail&ust=1784836118280000&sa=E
6922 E Via Northgate, Suite 2, Mesa, AZ 85212On Wed, Jul 22, 2026 10:44 AM, "Rodarte, Federico - MEX" <Federico.Rodarte@am.spectrumcontrol.com> wrote:
Hi Christopher, good morning.
Are you receiving my E-mails?
Please confirm.
Thanks
From: Rodarte, Federico - MEX
Sent: Monday, July 20, 2026 7:05 AM
To: Christopher Berger
Cc: Info at Turnpack; LLC SO2524915 Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX; Velazquez, Kevin - MEX; Sosa, Rosa - MX
Subject: RE: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667Hi Christopher, good morning, can you please update and share status?
Thanks.
From: Rodarte, Federico - MEX
Sent: Monday, July 13, 2026 7:27 AM
To: Sosa, Rosa - MX; Christopher Berger
Cc: Info at Turnpack; LLC SO2524915 Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX; Velazquez, Kevin - MEX
Subject: RE: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667Hi Christopher, good morning, can you please update and share status?
Thanks.
From: Sosa, Rosa - MX <Rosa.Sosa@am.spectrumcontrol.com>
Sent: Friday, June 26, 2026 2:30 PM
To: Rodarte, Federico - MEX; Christopher Berger
Cc: Info at Turnpack; LLC SO2524915 Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX; Velazquez, Kevin - MEX
Subject: RE: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667Good afternoon,
We need certificate of origin, value, and technical data sheet.
Thanks.
From: Rodarte, Federico - MEX <Federico.Rodarte@am.spectrumcontrol.com>
Sent: Friday, June 26, 2026 2:25 PM
To: Christopher Berger; Sosa, Rosa - MX
Cc: Info at Turnpack; LLC SO2524915 Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX
Subject: RE: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667Thanks Christopher, Customs clearance usually takes no more than 2 days (Rosa Sosa to confirm timing and needs of information in advance).
Thanks
From: Christopher Berger <cberger@turnpack.com>
Sent: Friday, June 26, 2026 1:24 PM
To: Rodarte, Federico - MEX
Cc: Info at Turnpack; LLC SO2524915 Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Sosa, Rosa - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX
Subject: Re: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Federico,
The machine is built and the new control system is installed. Two things remain: we're finishing commissioning of that control system — the motion tuning, recipe setup, and final functional testing on the actual machine — and one last hardware item, the antistatic lid, which installs last and is due in early next week. This control system is the new Beckhoff platform that replaces the obsolete design, and I won't ship until it runs as needed on your floor. We are close to wrapping up.
Because I've given your team enough moving ship dates, I commit to what I control directly and can prove: I will be on-site at your plant to finish installation, commission the machine, and train your operators myself.
I am booking travel today to be on-site the week of July 27. I'll forward my flight itinerary once ticketed so you can see it's firm. The machine docks out ahead of that, and I'll send the exact ship date the moment it's crated.
One ask so we can lock my exact on-site days together: since your team handles the El Paso-to-Juarez importation through WTS, can you confirm your typical clearance and cross time from the broker? If the machine clears earlier than expected, I'll move my trip up — I'd rather be there the week of July 20th or 13th.
I will finish this last stretch correctly and close it out in person.
ChrisOn Thu, Jun 25, 2026 at 2:51 PM Rodarte, Federico - MEX <Federico.Rodarte@am.spectrumcontrol.com> wrote:
Hi Cristopher, any update?
Thanks
From: Rodarte, Federico - MEX
Sent: Monday, June 22, 2026 8:30 AM
To: 'Christopher Berger'
Cc: 'Info at Turnpack'; 'LLC SO2524915 Turnpack'; Castillo, Ricardo - MX; Ortega, Estela - MX; Sosa, Rosa - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX
Subject: RE: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667Hi Christopher, good morning, anxious to see this week update to stay on target 06/26?
Also asking what do you need from our side in regards of the “Installation and Training” plan?
Thanks, please advise…
From: Rodarte, Federico - MEX
Sent: Monday, June 8, 2026 9:23 AM
To: 'Christopher Berger'
Cc: Info at Turnpack; LLC SO2524915 Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Sosa, Rosa - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX
Subject: RE: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667Excellent, thanks!
From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, June 8, 2026 9:19 AM
To: Rodarte, Federico - MEX
Cc: Info at Turnpack; LLC SO2524915 Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Sosa, Rosa - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX
Subject: Re: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Hi Federico,
Attached is the updated project schedule. We are still on target for the 06/26 ship date. This week will be critical as we finalize motor integration testing. I will provide another update on Friday.
Chris
On Tue, May 19, 2026 at 6:19 AM Rodarte, Federico - MEX <Federico.Rodarte@am.spectrumcontrol.com> wrote:
Thanks for the update.
Regards
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, May 19, 2026 7:15 AM
To: Rodarte, Federico - MEX
Cc: Info at Turnpack; LLC SO2524915 Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Sosa, Rosa - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX
Subject: Re: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Federico,
Attached is the updated project schedule (Rev. 2) reflecting last Week's progress. Every long-lead item is confirmed and on plan:
- Beckhoff hardware: confirmed arrival this week
- Applied Motion motor: confirmed by 5/25
- Antistatic lid: ordered, 4-week lead, ships direct to AZ for final install
- Chicago Dial Indicators: confirmed arrival before 6/1
- Coatings: shipping to vendor this week
- CAD released for in-house parts, fabrication in progress
6/26/2026 ship to your WTS broker in El Paso remains the committed date.
Next update is Friday, 5/22, focusing on the Beckhoff bench code dev kickoff and the Applied Motion motor arrival.
Chris
On Mon, May 11, 2026 at 5:27 AM Rodarte, Federico - MEX <Federico.Rodarte@am.spectrumcontrol.com> wrote:
Hi Christopher, thanks for the detailed status.
Being a 6/26 a firm target date we will then NOT pursue the loaner, not to distract a 100% hand on in our machine.
We can wait until, just make sure that 6/26 is a final ETS.
Thanks
From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, May 11, 2026 6:08 AM
To: Rodarte, Federico - MEX
Cc: Info at Turnpack; LLC SO2524915 Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Sosa, Rosa - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX
Subject: Re: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Federico,
I told you Friday for the schedule. It's attached now instead. From this point forward you'll get answers ahead of the question.
Committed ship date to your WTS broker in El Paso: Friday, June 26, 2026.
The attached one-page schedule shows every workstream and milestone supporting that date. Quick summary of the path:- The original X-stage drive motor is obsolete and the supplier's last-time-buy did not materialize. We have redesigned the motion control around Applied Motion drive motors and a Beckhoff industrial PC with touchscreen HMI. This permanently eliminates the obsolescence risk and adds two capabilities the original Midas design did not have: touchscreen operation and recipe management.
- Beckhoff hardware arrives in-house this week, which lets us develop the PLC, HMI, and recipe code on the bench in parallel with mechanical assembly at our build partner's shop. On-machine integration is therefore compressed to one week of motion tuning and commissioning.
- All other components have been received, are on order with confirmed dates, or are moving through machining and coating this week.
I am chasing four items today and will close them out in Friday's update:
- Applied Motion supplier ship date confirmation
- Antistatic lid PO placement and lead time
- Chicago Dial Indicator items (PO26121668) confirmed ETA
- Beckhoff arrival confirmation upon receipt this week
Loaner system: there is no cost to Spectrum. Turnpack covers freight both directions and any duty. If you'd like the loaner shipped this week to bridge the gap until 6/26, confirm and we'll proceed. If not, all hands stay on your machine.
Cadence going forward: written status from me every Friday morning until ship, covering parts received that week, build and test progress, and any schedule change the moment we see it — not after you ask.
The communication gaps on this build were on me. The technical path is solid and you'll see that reflected in the weekly updates starting this Friday.
ChrisOn Thu, May 7, 2026 at 5:26 AM Rodarte, Federico - MEX <Federico.Rodarte@am.spectrumcontrol.com> wrote:
OK Christopher, thanks for replying.
Noted, will wait on tomorrow’s status to see gaps on supplying the new machine, after that will make a call if continue with a loaner or not. I mean if the new machine ETA is kind of within a couple of weeks, will wait… will see then by the new dates are available.
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, May 6, 2026 10:24 PM
To: Rodarte, Federico - MEX
Cc: Info at Turnpack; LLC SO2524915 Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Sosa, Rosa - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX
Subject: Re: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Federico,
You're right, and I owe you a straight answer rather than another general update.
I am not going to give you a ship date tonight that I can't stand behind. You will have one Friday morning, in writing, with the supporting milestones so you can hold us to it. Here is what I can confirm now:
- The X-stage drive motors used in the original Midas design are obsolete with no last-time-buy available. We have redesigned the motion control around Applied Motion motors/drives and a Beckhoff industrial PC with touchscreen HMI. This removes the obsolescence risk permanently and adds touchscreen operation and recipe management that the original Midas design did not have.
- Motors, drives, IPC and panel are all on order. Friday's update will include confirmed delivery dates from each supplier, the resulting ship date with float, and the build/test milestones in between.
- After Friday, you will receive a written status from me every Friday morning until the machine ships — parts received that week, build/test progress, and any schedule change the moment we see it, not after you ask.
Loaner: there is no cost to Spectrum. Turnpack covers freight both directions and any duty. If you want it shipped next week to bridge the gap, confirm and we'll proceed. If not, we'll put all hands on your machine.
The communication gaps on this build are on me. The technical path forward is sound and you'll see that reflected in the cadence starting Friday.
ChrisOn Tue, May 5, 2026 at 8:43 AM Rodarte, Federico - MEX <Federico.Rodarte@am.spectrumcontrol.com> wrote:
Hi Christopher, we, as customers want you to take the initiative to be one step ahead and to provide info not only when we asked for, which is what happens now.
We need our machine, upgraded or not, you committed to a quote and sell t, and pushed out time after time is causing us trouble to fulfill orders with our end customers.
Sounds like a “loaner system” will cause extra costs for us? If so, no, don’t want to go through.
With that said what is the new ETA FOR THE NEW MACHINE?
Please advise.
Get Outlook for iOS
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, May 5, 2026 9:05:33 AM
To: Rodarte, Federico - MEX <Federico.Rodarte@am.spectrumcontrol.com>
Cc: Info at Turnpack <info@turnpack.com>; LLC SO2524915 Turnpack <catchall@turnpack.com>; Castillo, Ricardo - MX <Ricardo.Castillo@am.spectrumcontrol.com>; Ortega, Estela - MX <estela.ortega@am.spectrumcontrol.com>; Sosa, Rosa - MX <Rosa.Sosa@am.spectrumcontrol.com>; Mata, Monica - MX <Monica.Mata@am.spectrumcontrol.com>; Castillo, Ivonne - MX <Ivonne.Castillo@am.spectrumcontrol.com>; Licon, Ana - MEX <Ana.Licon@am.spectrumcontrol.com>; Heredia, Roman - MX <Roman.Heredia@am.spectrumcontrol.com>
Subject: Re: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Hi Federico,
I didn't realize you wanted a loaner system but we started on preparing that go get it shipped to you early next week. I will keep you posted on this.
Regarding your machine we could not purchase more of the X-stage drive motors due to obsolescence even though the Sales Rep had originally indicated that we could make one last buy. We have been working to update the design and have placed orders for different motors that need integration. With the new design also includes a touchscreen and recipe management functionality which the current outdated version lacks.
Thanks
Chris
On Tue, May 5, 2026 at 5:26 AM Rodarte, Federico - MEX <Federico.Rodarte@am.spectrumcontrol.com> wrote:
Any feedback?
From: Rodarte, Federico - MEX
Sent: Thursday, April 30, 2026 8:53 AM
To: 'Christopher Berger'
Cc: Info at Turnpack; LLC SO2524915 Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Sosa, Rosa - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX
Subject: RE: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667Team Turnpack, Christopher, Lorena, the extended six weeks delay due this week.
Have not receive a “loaner system” since, yet would like to know what’s the ETA of our new machine is within next week having the extended six weeks already passed.
Please advise today.
Thanks
From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, March 23, 2026 11:12 AM
To: Rodarte, Federico - MEX
Cc: Info at Turnpack; LLC SO2524915 Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Sosa, Rosa - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX
Subject: Re: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Hi Federico,
Please accept my sincere apologies for the delayed response and the ongoing frustration this has caused your team.
We have received a further update regarding the supply chain issues for the Midas D5L6 De-Lidder (Ref SO2524915). Unfortunately, we are facing an additional six-week delay due to a custom component. Because this part is highly specialized, it cannot be sourced from an alternative vendor or replaced with a different component in a shorter timeframe.
We understand that you desperately need this equipment to meet your own customer commitments. To help bridge this gap, I am currently putting together a loaner system that we hope to ship by the end of this week. This should allow you to maintain operations while we finalize your specific machine.
I will provide a firm confirmation regarding the loaner shipment and a revised ETA for your unit as soon as possible. Thank you for your continued patience.
Best regards,
Chris Berger
On Mon, Mar 23, 2026 at 10:04 AM Rodarte, Federico - MEX <Federico.Rodarte@am.spectrumcontrol.com> wrote:
Team Turnpack, Christopher, Lorena, again and again looking for answers, at least a reply from someone in your Company that is taking care of business.
No one replies, what is the issue?, when you are going to provide feedback on the machine, not the “waiting on new components” but on the updated ETA?
Please advise or at least tell us who to contact if you’re not the right person to follow-up.
Thanks
From: Rodarte, Federico - MEX
Sent: Wednesday, March 18, 2026 8:26 AM
To: Info at Turnpack; Christopher Berger; LLC SO2524915 Turnpack
Cc: Castillo, Ricardo - MX; Ortega, Estela - MX; Sosa, Rosa - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX
Subject: RE: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667Hello, Christopher, Lorena.
We have been dealing with our end- Customer the delays on the equipment availability.
We do receive from you only status that you are waiting on components and promising status… but nothing comes after.
So… what is the status?, when is the new committed ETA while 3/15 did not occur?
Please advise.
Thanks
From: Info at Turnpack <info@turnpack.com>
Sent: Thursday, March 12, 2026 12:20 PM
To: Rodarte, Federico - MEX
Cc: Christopher Berger; LLC SO2524915 Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Sosa, Rosa - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX
Subject: Re: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Hello Team!
we are still waiting on delivery for a few more components. I am expecting to have more information by end of day tomorrow. Your patience is appreciated. thank you.
On Wed, Mar 11, 2026 at 8:39 AM Rodarte, Federico - MEX <Federico.Rodarte@am.spectrumcontrol.com> wrote:
Hello, Christopher, Lorena.
Any update?, 03/15 is this coming Sun/Mon 03/16…. Are we still on target?
Thanks
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, March 4, 2026 1:26 PM
To: Rodarte, Federico - MEX
Cc: LLC SO2524915 Turnpack; Info at Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Sosa, Rosa - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX
Subject: Re: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Hi Federico,
Thank you for checking in.
We are currently addressing a supply chain issue related to the cutter motor on the D5L6 De-Lidder. Normally we keep these motors in stock, however an unusually high volume of machine orders recently depleted our inventory.
We are actively working with the supplier to secure the next delivery and determine the exact timing. At the moment we are still targeting the March 15th delivery date, but we are waiting on final confirmation from the supplier.
I expect to have a firm update for you by this Friday and will send it as soon as I receive confirmation.
Thank you for your patience while we work through this.
Best regards,
Chris BergerOn Wed, Mar 4, 2026 at 12:33 PM Rodarte, Federico - MEX <Federico.Rodarte@am.spectrumcontrol.com> wrote:
Hi Christopher, trust me, before sending a message to you, I’ve checking first with Ms. Ivonne for status.
No update from Feb 20th. yet.
Since you had said that have some supply challenges we would like to know if March the 15th. still the ETA?
Please advise…. Thanks
From: Christopher Berger <cberger@turnpack.com>
Sent: Friday, February 20, 2026 6:47 PM
To: Rodarte, Federico - MEX
Cc: LLC SO2524915 Turnpack; Info at Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Sosa, Rosa - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX
Subject: Re: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Hi Federico,
Apologies for not sending a direct response to you but we have been updating Ivonne and I assumed you would be in touch with her.
We are working on supply chain challenges and will above if we encounter any delays.
Chris
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
On Fri, Feb 20, 2026, 4:31 PM Rodarte, Federico - MEX <Federico.Rodarte@am.spectrumcontrol.com> wrote:
Hello Turnpack team, Christopher, 3rd E-mail sent asking for assistance with no answer , tried also by phone and no answer. Can someone from Turnpack replies?, or who to contact in case you’re not responsible for Customer Service?
Thanks
Get Outlook for iOS
From: Rodarte, Federico - MEX
Sent: Monday, February 16, 2026 7:04:47 AM
To: Christopher Berger <cberger@turnpack.com>; LLC SO2524915 Turnpack <catchall@turnpack.com>; Info at Turnpack <info@turnpack.com>
Cc: Castillo, Ricardo - MX <Ricardo.Castillo@am.spectrumcontrol.com>; Ortega, Estela - MX <estela.ortega@am.spectrumcontrol.com>; Sosa, Rosa - MX <Rosa.Sosa@am.spectrumcontrol.com>; Mata, Monica - MX <Monica.Mata@am.spectrumcontrol.com>; Castillo, Ivonne - MX <Ivonne.Castillo@am.spectrumcontrol.com>; Licon, Ana - MEX <Ana.Licon@am.spectrumcontrol.com>; Heredia, Roman - MX <Roman.Heredia@am.spectrumcontrol.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667Hellos Turnpack team, good morning.
Sent you this E-mail Wednesday, have not receive a response, can you please check and advise at your earliest convenience?
Thanks
From: Rodarte, Federico - MEX
Sent: Wednesday, February 11, 2026 3:38 PM
To: Christopher Berger; LLC SO2524915 Turnpack; Info at Turnpack
Cc: Castillo, Ricardo - MX; Ortega, Estela - MX; Sosa, Rosa - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX
Subject: RE: Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667Hello Christopher, Turnpack team, can you please share an update of the ETA of the de-lidder?
Desperately needed to have it as soon as possible.
Thanks and appreciate your efforts to improve 03/15 targeted date if possible.
Federico Rodarte R – Mexico Operations
Spectrum Control, Inc
+1 915 592 2249 Xt 106
Federico.Rodarte@am.spectrumControl.com
From: Castillo, Ivonne - MX <Ivonne.Castillo@am.spectrumcontrol.com>
Sent: Friday, February 6, 2026 3:21 PM
To: Christopher Berger; LLC SO2524915 Turnpack
Cc: Info at Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Sosa, Rosa - MX; Rodarte, Federico - MEX; Mata, Monica - MX
Subject: RE: Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667Hi Chris.
The next week I’ll be on vacations so please help me to keep to all in copy for any update.
Thank you and have a good weekend!
Ivonne Castillo
MRO Purchasing
SPECTRUM CONTROL INC.
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, February 5, 2026 9:23 AM
To: Castillo, Ivonne - MX; LLC SO2524915 Turnpack
Cc: Info at Turnpack; Castillo, Ricardo - MX; Suarez, Juan - MEX; Sosa, Rosa - MX; Rodarte, Federico - MEX; Mata, Monica - MX
Subject: RE: Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Hi Ivonne,
I am on a business trip this week and a little behind. I will be in the office tomorrow and then send you an update.
Chris
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
On Thu, Jan 29, 2026 at 13:59 PM Ivonne - MX Castillo wrote:
Hello Chris,
Hope you’re doing well,
Are we still good with target Ship Date: March 15, 2026 ?
Please let us know.
Thank you and have a good afternoon!
Ivonne Castillo
MRO Purchasing
SPECTRUM CONTROL INC.
From: Christopher Berger <cberger@turnpack.com>
Sent: Friday, January 9, 2026 4:57 PM
To: Castillo, Ivonne - MX
Cc: Info at Turnpack; Castillo, Ricardo - MX; Suarez, Juan - MEX; Sosa, Rosa - MX; Turnpack, LLC SO2524915; Mata, Monica - MX
Subject: Re: Turnpack, LLC Quotation (Ref SO2524915) install & training in Mexico?IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Hi Ivonne,
This email confirms receipt of your order for the Midas D5L6 Delidder. We have initiated the project and are proceeding with execution on our standard, proven platform based on prior builds.
Below is the high-level project schedule for planning purposes. This build is largely procurement-, machining-, and assembly-driven, with limited engineering activity focused on BOM verification and minor drawing updates only.
High-Level Project Schedule (Subject to Material Lead Times)
-
Requirements Confirmation & BOM Validation:
Final confirmation of scope, verification and cleanup of the existing BOM, and release for purchasing. -
Purchasing & Machining:
Procurement of all purchased components and machining/fabrication of custom parts. Long-lead items will be tracked closely. -
Build & Wiring:
Mechanical assembly of the machine and control panel build and wiring. -
Integration & Testing:
Power-up, functional verification, and process testing. -
Documentation, Crating & Delivery:
Final documentation package, crating, and shipment preparation.
Target Ship Date: March 15, 2026
We will communicate proactively if any supplier lead times impact this date. Otherwise, execution will proceed to support shipment on the target date above.
Please let us know if you have any questions or if additional coordination is needed.
Best regards,
ChrisOn Fri, Dec 19, 2025 at 4:56 PM Castillo, Ivonne - MX <Ivonne.Castillo@am.spectrumcontrol.com> wrote:
Hello Chris,
Thank you for your replied.
Please find PO attached for this shipment.
Hopefully, you can help us to improve lead time.
Thank you and have a good afternoon.
Ivonne Castillo
MRO Purchasing
SPECTRUM CONTROL INC.
From: Info at Turnpack <info@turnpack.com>
Sent: Friday, December 19, 2025 4:49 PM
To: Castillo, Ivonne - MX
Cc: Christopher Berger; Castillo, Ricardo - MX; Suarez, Juan - MEX; Sosa, Rosa - MX; Turnpack, LLC SO2524915; Mata, Monica - MX
Subject: Re: Turnpack, LLC Quotation (Ref SO2524915) install & training in Mexico?IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Hello Ivonne
Thank you for the inquiry. I do not see where a PO was sent for this to confirm the order.
Can you please forward to info@turnpack.com so we can get this moving for you?
Once received we can send a update on the lead-time.
Have a great day!
On Fri, Dec 19, 2025, 1:32 PM Castillo, Ivonne - MX <Ivonne.Castillo@am.spectrumcontrol.com> wrote:
Hello Chris,
Hope you’re doing well,
Would you help us to know about status of this SO2524915 delivery, please?
Thank you!
Ivonne Castillo
MRO Purchasing
SPECTRUM CONTROL INC.
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, November 4, 2025 8:52 AM
To: Castillo, Ivonne - MX
Cc: Info at Turnpack; Castillo, Ricardo - MX; Suarez, Juan - MEX; Sosa, Rosa - MX; Turnpack, LLC SO2524915; Ortega, Estela - MX; Mata, Monica - MX
Subject: Re: Turnpack, LLC Quotation (Ref SO2524915) install & training in Mexico?IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Hi Ivonne,
Yes, installation and training in Juarez Chihuahua, Mexico is provided with these line items. We will fly into El Paso and then probably need some advice from you on how to best cross the border and which hotel to stay in.
Chris
On Tue, Nov 4, 2025 at 8:07 AM Castillo, Ivonne - MX <Ivonne.Castillo@am.spectrumcontrol.com> wrote:
Good day Chris,
We are still waiting the response regarding if Install & Training is available here in Juarez Chihuahua, Mexico
Please let us know if not is available.
If service isn’t available, please help us to remove “install & Training” from quote and let us know how guarantee will be affected if we do the installation by ourself.
Thank you!
Ivonne Castillo
MRO Purchasing
SPECTRUM CONTROL INC.
From: Castillo, Ivonne - MX
Sent: Monday, November 3, 2025 7:51 AM
To: Info at Turnpack
Cc: Castillo, Ricardo - MX; Suarez, Juan - MEX; Sosa, Rosa - MX; Turnpack, LLC SO2524915; Ortega, Estela - MX; Mata, Monica - MX
Subject: RE: Turnpack, LLC Quotation (Ref SO2524915) help for update quote date.Good day Chris,
Information received. Thank you!
This location is our broker warehouse (we do all importation arrangements from there).
SHIP TO ADDRESS:
Spectrum Control, De Mexico
C/O WTS Corporation Inc.
Our location is in Juarez, Chihuahua. Mexico. so, regarding Install & Training, are you available to do it here in Mexico?
Please confirm.
Thanks again & have a great week!
Ivonne Castillo
MRO Purchasing
SPECTRUM CONTROL INC.
From: Info at Turnpack <info@turnpack.com>
Sent: Saturday, November 1, 2025 9:20 AM
To: Castillo, Ivonne - MX
Cc: Castillo, Ricardo - MX; Suarez, Juan - MEX; Sosa, Rosa - MX; Turnpack, LLC SO2524915
Subject: Re: Turnpack, LLC Quotation (Ref SO2524915) help for update quote date.IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Hello Ivonne,
Please see attached forms per your request.
Sales/Engineering
Contact name: Chris Berger
Address: 22425 S Scotland Ct 104
Email: cberger@turnpack.com
Phone number: 480.331.1878
Document Processing
Contact name: Lorena Carrillo
Address: 22425 S Scotland Ct 104
Email: info@turnpack.com
Phone number: 480.331.1878
On Fri, Oct 31, 2025, 10:11 AM Castillo, Ivonne - MX <Ivonne.Castillo@am.spectrumcontrol.com> wrote:
Hi Chris,
Received, Thank you!
Would you help us to provide information to do all arrangements for payment thru wire transfer, please?
Also, we need some information for your Company for uploaded in our supplier system. Would you help us to provide it please?
Contact name:
Address:
Email:
Phone number:
W9 form
and filled out attached form.
Thank you and Happy Halloween!
Ivonne Castillo
MRO Purchasing
SPECTRUM CONTROL INC.
From: Info at Turnpack <info@turnpack.com>
Sent: Friday, October 31, 2025 10:30 AM
To: Castillo, Ivonne - MX
Cc: Castillo, Ricardo - MX; Suarez, Juan - MEX; Sosa, Rosa - MX; Turnpack, LLC SO2524915
Subject: Re: Turnpack, LLC Quotation (Ref SO2524915) help for update quote date.IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Hi Ivonne,
Thanks for your email. I just resent the quote from our system. Please let us know if you have any questions.
Chris
On Thu, Oct 30, 2025 at 3:16 PM Castillo, Ivonne - MX <Ivonne.Castillo@am.spectrumcontrol.com> wrote:
Hello Chris,
Hope you’re doing well,
We have the purchase for the de-lidder authorized but quotation attached date now is expired.
Would you help us for update it please or can we use it anyway?
Please let us know
Thank you!
Ivonne Castillo
MRO Purchasing
SPECTRUM CONTROL INC.
From: Info at Turnpack <info@turnpack.com>
Sent: Tuesday, August 5, 2025 3:34 PM
To: Castillo, Ricardo - MX
Cc: Sosa, Rosa - MX; Castillo, Ivonne - MX; Turnpack, LLC SO2524915; Suarez, Juan - MEX
Subject: Re: Turnpack, LLC Quotation (Ref SO2524915) help for update quote date.IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Hi Ricardo,
Sorry about that. I kept looking for DSF6 and didn't see the mistake of D5F6. Attached is the updated quote.
Chris
On Tue, Aug 5, 2025 at 2:28 PM Castillo, Ricardo - MX <Ricardo.Castillo@am.spectrumcontrol.com> wrote:
Hi Chris
Cover page of quotation shows a D5F6, while the one we look for is a linear delidder not fiber one. We want a D5L6.
There might be an issue while approving our internal CER if we show a different model on cover than the one that is on next pages.
From: Info at Turnpack <info@turnpack.com>
Sent: Tuesday, August 5, 2025 3:25 PM
To: Sosa, Rosa - MX
Cc: Castillo, Ivonne - MX; Turnpack, LLC SO2524915; Suarez, Juan - MEX; Castillo, Ricardo - MX
Subject: Re: Turnpack, LLC Quotation (Ref SO2524915) help for update quote date.IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
HI Rosa,
I am not sure I follow. Where does it say DSF6?
Chris
On Tue, Aug 5, 2025 at 1:36 PM Sosa, Rosa - MX <Rosa.Sosa@am.spectrumcontrol.com> wrote:
von Ricardo Castillo - 10:57 - 7 Okt. 2026 -
Re: Your DATRON CNC Milling Tools order has been received!
I sent a request for the address to be updated last night- please either copy me or let me do these steps moving forward to avoid double work or confusion for the vendor.
Thank you.
From: Info at Turnpack <info@turnpack.com>
Sent: Tuesday, October 6, 2026 9:27 PM
To: Samantha Roman <sroman@turnpack.com>
Cc: Christopher Berger <cberger@turnpack.com>
Subject: Re: Your DATRON CNC Milling Tools order has been received!I updated the addresses and emailed them but of course you can too. tools@datron.com
No all the address should be updated to the new address. Thanks for your help!
Lorena Carrillo
Office Manager
Office: 480-331-1878
Direct Line: 781-938-0069
NEW ADDRESS: 6922 Via Northgate Ste 101, Mesa, AZ 85212
lcarrillo@turnpack.com | www.turnpack.com
https://www.turnpack.com/midas-rework/delidder
On Tue, Oct 6, 2026, 8:39 PM Samantha Roman <sroman@turnpack.com> wrote:
That's odd, I specifically typed out the address for this one to come here. I will send them a message asking for it to be updated.
I needed to get an estimated arrival date- so that helps. Do we leave the billing as QC for now?
From: Info at Turnpack <info@turnpack.com>
Sent: Tuesday, October 6, 2026 8:33 PM
To: Christopher Berger <cberger@turnpack.com>; Samantha Roman <sroman@turnpack.com>
Subject: Fwd: Your DATRON CNC Milling Tools order has been received!This order shipped to queen creek
Lorena Carrillo
Office Manager
Office: 480-331-1878
Direct Line: 781-938-0069
NEW ADDRESS: 6922 Via Northgate Ste 101, Mesa, AZ 85212
lcarrillo@turnpack.com | www.turnpack.com
https://www.turnpack.com/midas-rework/delidder
---------- Forwarded message ---------
From: DATRON USA <orders@datron.com>
Date: Tue, Oct 6, 2026, 12:18 PM
Subject: Your DATRON CNC Milling Tools order has been received!
To: <info@turnpack.com>
Thank you for your order
Hi Christopher,
Just to let you know — we’ve received your order, and it is now being processed.
Here’s a reminder of what you’ve ordered:
Order summary
Order #26703 (October 6, 2026)Product Quantity Price 
Tool Adapter
SKU: 0068336Cutting Diameter (D1): 3mm
Shank (D2): 6mm
D3: 7.55mm×3 $353.94 
Long Reach Single Flute End Mill
SKU: 00684910Cutting Diameter (D1): 1mm
Shank (D2): 6mm
D3: 0.9mm
Length (L1): 50mm
Cutting Depth (L2): 4mm
L3: 7mm
Flutes: 1×2 $138.12
Subtotal: $492.06 Shipping: Free Ground Shipping Free! Tariff Surcharge: $39.36 Tax: $0.00 Total: $531.42 Payment method: Credit Card
Customer note
PO 26402209
Billing address Christopher Berger
Turnpack
22425 S Scotland Ct
Suite 104
Queen Creek, AZ 85140
4803311878
info@turnpack.comShipping address Christopher Berger
Turnpack
22425 S Scotland Ct
Suite 104
Queen Creek, AZ 85140
4803311878
Thanks for using shop.datron.com!
*Please note that items shipped from separate warehouses may arrive in multiple packages.DATRON CNC Milling Tools — https://shop.datron.com/
Read our tool refund and returns policy
von Samantha Roman - 10:57 - 7 Okt. 2026 -
UPDATE: Shipment for Order W026703 was changed
Ship to:
Turnpack
6922 E Via Northgate, Suite 101
Mesa, AZ 852121295
UNITED STATES
(480) 331-1878
Your shipment for order(s) W026703 has been modified. Please disregard the previous notification and refer to the following information regarding the new shipment.
It was processed on 10/07/2026 using USPS (USPS Priority Mail®) service. The physical package(s) may or may not have actually been tendered to USPS for the shipment.
The new shipment contains 1 packages with master tracking number 9405536105441276070946, estimated delivery is 10/09/2026.
Pkg #
Tracking Number
1
9405536105441276070946 Item #
Description
Qty Ordered
Qty Shipped
0068336 6mm Adapter for 3mm Tool 3
3
00684910 1mm SF EM x 6mm 2
2
/TARIFF Tariff Surcharge 1
1
We appreciate your business,
DATRON USA Inc
115 Emerson Rd
Milford, NH 030553583
UNITED STATES
(603) 215-5849
Shipping and email automation powered by StarShip
von eNotify@starship.online - 10:41 - 7 Okt. 2026 -
Ship Notification: Shipment for Order W026703 was processed
Ship to:
Turnpack
6922 E Via Northgate, Suite 101
Mesa, AZ 852121295
UNITED STATES
(480) 331-1878
DATRON USA Inc is pleased to inform you that the shipment for your order(s) W026703 has been processed using USPS (USPS Priority Mail®) service. The physical package(s) may or may not have actually been tendered to USPS for the shipment.
Your shipment contains 1 packages with master tracking number 9405536105441276070939, estimated delivery is 10/09/2026.
Pkg #
Tracking Number
1
9405536105441276070939 Item #
Description
Qty Ordered
Qty Shipped
0068336 6mm Adapter for 3mm Tool 3
3
00684910 1mm SF EM x 6mm 2
2
/TARIFF Tariff Surcharge 1
1
We appreciate your business,
DATRON USA Inc
115 Emerson Rd
Milford, NH 030553583
UNITED STATES
(603) 215-5849
Shipping and email automation powered by StarShip
von eNotify@starship.online - 10:38 - 7 Okt. 2026 -
RE: Order #26703 (October 6, 2026)
This has been updated in our system, thank you!
DATRON USA Datron Tooling tools@datron.com www.datron.com From: Samantha Roman <sroman@turnpack.com>
Sent: Tuesday, October 6, 2026 11:43 PM
To: Datron Tooling <tools@datron.com>
Subject: Order #26703 (October 6, 2026)Hello, I need to update the shipping address on our account and have this order sent to the correct one. Please advise if this is possible. New address is 6922 East Via Northgate Mesa AZ 85212 Thank you, Samantha Roman Operations &am
Hello,
I need to update the shipping address on our account and have this order sent to the correct one. Please advise if this is possible.
New address is 6922 East Via Northgate Mesa AZ 85212
Thank you,
von Casey Howrilka - 09:41 - 7 Okt. 2026 -
ALA Scheduled Maintenance
Email from Allyn International Services, Inc.
Logistics Management | Tax Services | Global Trade Compliance
October 2026
ALA Scheduled Maintenance
We would like to inform you of an upcoming ALA scheduled maintenance. Please take note of the following details:
Date: Wednesday, October 7
Time: 12:00 p.m. – 12:15 p.m. ET
Duration: 15 Minutes
Maintenance Details:
This maintenance will include a security upgrade to the ALA FTP server. As part of this upgrade, clients utilizing the FTP server will be prompted to accept a new security certificate upon their next connection.
We appreciate your understanding and cooperation as we strive to improve our services.
If you have any further questions or concerns, please reach out to our ALA Helpdesk. 
Allyn International Services, Inc. | 13391 McGregor Blvd. | Fort Myers, FL 33919 US
von "Allyn IT Team" <allynnoreply@allynintl.com> - 09:01 - 7 Okt. 2026 -
*Turnpack - Lockheed PO 117242 LR 154657 Angel R. Task 12546448
Lockheed Martin Proprietary Information
Good morning,
Please see attached order and confirm receipt thank you ✔
>NOTE ON QUOTES – PLEASE REFER TO MY PO ORDER attached FOR EXACT QTY and SHIPPING ADDRESS ✔
- PAYMENT - Please use cc ending in 5934 or send payment link or let me know if I need to call.
*If there is a price revision please proceed with the order unless there is a very large difference – then we will confirm the new price and or get you a revised PO.
- WE PREFER 😊 that you pre-pay and bill shipping
- BELOW IS OUR ACCOUNT FOR UPS or FedEx if you can’t pre-pay and bill shipping
- When available please send itemized invoice for our reconciling purposes.
THANK YOU 😊
We are not tax exempt
We cannot accept shipments direct from outside the USA.
Melanie Baker
Purchasing Administrative Assistant
Missiles and Fire Control (MFC)
SHIPPING ADDRESS
Lockheed Martin Facilities Maintenance
8801 Lockheed Martin Blvd
Gate 4, M011
Orlando, FL 32819
Office: (407) 356-0173
Cell-Text is ok: (407) 719-3651
www.facebook.com/lockheedmartin
www.youtube.com/user/LockheedMartinVideos
www.linkedin.com/company/lockheed-martin
www.instagram.com/lockheedmartin
Lockheed Martin Proprietary Information
Lockheed Martin Proprietary Information
von "melanie.r.baker@lmco.com" <melanie.r.baker@lmco.com> - 07:06 - 7 Okt. 2026
