Archive
Info Inbox
info@turnpack.com
-
Invoice for Your Order PO26211761
InvoiceBilled toTURNPACK LLC
22425 S SCOTLAND CT STE 104
QUEEN CREEK AZ 85142Purchase Order PO26211761 Total $225.82 Invoice 65772073 Invoice Date 5/28/26 Payment Terms 2% 10, Net 30 Deduct $4.26 on merchandise if paid by 6/7/26. Shipped toAttention: Suite 104Turnpack LLC
22425 S Scotland CT Ste 104
Queen Creek AZ 85142Mail Payment to McMaster-Carr
PO Box 7690
Chicago IL 60680-7690Your Account 438808000 Christopher Berger placed this order.Line Product Ordered Shipped Balance Price Total 1 5537T834 Snap Close Cable Holder, for 20 mm High Rail T-Slotted Framing 1 Each1 0 3.69 Each3.69 2 5278N21 Self-Aligning T-Slotted Framing Nuts, Spring Tab, Drop-in, for 1.5" and 40mm Rail, M8 Thread, Packs of 4 5 Packs5 0 5.58 Per Pack27.90 3 6812N139 T-Slotted Framing, Screw-on Bumper for 40 mm and 45 mm High Single Rail 2 Each2 0 5.86 Each11.72 4 4138T731 Gas Spring, M8 Thread Size, 7.4" Extended Length, 15 lbs. Force 4 Each4 0 28.72 Each114.88 5 97654A377 18-8 Stainless Steel Flanged Button Head Screw, M5 x 0.8 mm Thread, 12 mm Long, Packs of 25 2 Packs2 0 15.53 Per Pack31.06 6 92095A224 18-8 Stainless Steel Button Head Hex-Drive Screw, M6 x 1 mm Thread Size, 10 mm Long, Packs of 50 1 Pack1 0 12.63 Per Pack12.63 7 92095A239 18-8 Stainless Steel Button Head Hex-Drive Screw, M6 x 1 mm Thread Size, 8 mm Long, Packs of 25 1 Pack1 0 11.05 Per Pack11.05 Merchandise 212.93 Shipping 12.89 Total $225.82 Packing List Shipped Weight Carrier Tracking 8018292-01 05/28/2026 3 lb UPS 1Z0526850313883115 Federal ID 36-1458720
von "McMaster-Carr" <invoice.reply@mcmaster.com> - 02:37 - 29 Mai 2026 -
Important User Agreement Update
eBay Newsletter
Important User Agreement Update
Dear turnpack,
We’ve updated eBay’s User Agreement, including the agreement to arbitrate any disputes you may have with us. Our updated User Agreement was posted on May 26, 2026. For users who agreed to a prior version of our User Agreement, this agreement is effective as of June 28, 2026. These changes are designed to support our evolving features and services. We’ve also made clearer shipping options, labels and seller shopping obligations.
We encourage you to read through the updated User Agreement. If you do not agree, you may close your eBay account by June 28, 2026 and stop using our services. If you keep your account with eBay, you agree that your continued use of our services constitutes your acceptance of the updated User Agreement.
Thank you for being a member of our community.
The eBay Team
Learn about account protection.
If you have a question, contact us.
eBay Inc., 2025 Hamilton Ave., San Jose, CA 95125, United States
© 1995-2026 eBay Inc. or its affiliates
von "eBay" <ebay@info.ebay.com> - 10:37 - 28 Mai 2026 -
Re: Turnpack, LLC Order (Ref PO26211762) [Case: 1779485]
1779485:2549832Good day, teamThank you for reaching the Customer Care department of OMRON. I hope you’re having a great Thursday.Do you acknowledge the 10% tariff surcharge? Your approval is needed to continue with your order.Thanks for the help.Cristian R.Customer Care AssociateDirect: US: 800.556.6766 CA:866.986.6766 | customercare@omron.comDirect: MX/Latin America: 800 386 6766| mela@omron.comOmron Automation AmericasThis is a confidential message. If received in error, delete it and notify the sender.On Thu, 28 May at 3:31 PM , Turnpack, LLC PO26031560 (SO2547975) <catchall@turnpack.com> wrote:
Confirm PO26211762
$ 592.80 due 5/28/26
Dear Orders (Omron Automation Americas)
Please find attached purchase order PO26211762 amounting in $ 592.80 from Turnpack, LLC as well as the resale certificate, for your review and action.
The receipt is expected for 05/29/2026, if this date is not achievable, please reply with an available date for reconsideration.
**Please acknowledge the receipt of this order and lead time.
Turnpack — Efficiency Redefined Through Automation
von "Customer Care US/CA" <customercare@omron.com> - 05:46 - 28 Mai 2026 -
Your Packages Arrive Tomorrow
UPS
Hi LorenaCarrillo, You have 2 packages arriving tomorrow. Estimated Delivery Friday 05/29/2026 From EO US OUTBOUND Reference Number: 83204966 1Z0695070225337996 9:15 AM - 11:15 AM From OMEGA ENGINEERING INC Reference Number: PO26201757 1Z0706860304746830 by 9:00 PM Ship To TURNPACK
22425 S SCOTLAND CT
STE 104
QUEEN CREEK, AZ 851421042
US
von "UPS" <mcinfo@ups.com> - 03:01 - 28 Mai 2026 -
UPS Update: Package Scheduled for Delivery Tomorrow
UPS
Hi Christopher, Your package is arriving tomorrow. From OMEGA ENGINEERING INC Estimated Delivery Friday 05/29/2026
between 9:15 AM - 11:15 AMChange Delivery Ship To 22425 S SCOTLAND CT, SUITE104
QUEEN CREEK, AZ 85142
USUPS Ground 1Z0706860304746830 Get More Control with UPS My Choice Premium
For only $19.99 a year, UPS My Choice® Premium members get unlimited delivery changes.
Upgrade to PremiumYou will be prompted to accept Terms and Conditions to change delivery.
von "UPS" <mcinfo@ups.com> - 02:11 - 28 Mai 2026 -
Instant Savings on Duracell Batteries
Instant Savings on Duracell Batteries
DuracellSAVE $2.50 Duracell
Power Boost Coppertop
Alkaline AAA Batteries, 40 ctSAVE $2.50 Duracell
Power Boost Coppertop
Alkaline AA Batteries, 40 ctSAVE $2 Duracell
Coppertop
Alkaline 9V Batteries, 8 ctSAVE $2 Duracell
Coppertop
Alkaline D Batteries, 14 ctSAVE $2 Duracell
Coppertop
Alkaline C Batteries, 14 ctInstant Savings Duracell
2032 Lithium Coin Batteries
12-countShop All Duracell Instant Savings ❯ BSEProduct specifications, availability and prices are subject to change without notice.
Duracell Savings: Instant Savings are valid only through May 31, 2026 at Costco Business Center. A valid Costco membership is required. State law may require sales tax to be charged on the pre-discounted price if the product is subject to sales tax. These taxes, if any, are in addition to the amount you are paying for the product. Quantities are limited. Item limits apply, per member. Instant Savings limited to inventory available from the manufacturer. No rain checks will be issued for out of stock items. All Instant Savings are available for delivery unless indicated. Delivery orders must be placed online at CostcoBusinessDelivery.com or SameDay.CostcoBusinessDelivery.com to receive Instant Savings. Savings are not available on Costco.com and may not be combined with any other Instant Savings or coupon. Cigarette items are for resale only. No cash redemption.
Savings Event: Instant Savings are valid only May 11 - June 7, 2026 at Costco Business Center and CostcoBusinessDelivery.com. A valid Costco membership is required. State law may require sales tax to be charged on the pre-discounted price if the product is subject to sales tax. These taxes, if any, are in addition to the amount you are paying for the product. Quantities are limited. Item limits apply, per member. Instant Savings limited to inventory available from manufacturer. No rain checks will be issued for out of stock items. All Instant Savings are available for delivery unless indicated. Delivery orders must be placed online at CostcoBusinessDelivery.com or SameDay.CostcoBusinessDelivery.com to receive Instant Savings. Savings are not available on Costco.com and may not be combined with any other Instant Savings or coupon. Cigarette items are for resale only. No cash redemption.
In the past you provided Costco with your email address info@turnpack.com. Occasionally, you will receive brief advertising announcements regarding special items and services. If you prefer not to receive these advertisements, please click unsubscribe to send an email requesting to be removed.
To contact us, please click here.
Costco Wholesale, Customer Service | P.O. Box 34535 -- Seattle, WA 98124-1535
© 1998-2026 Costco Wholesale Corporation. All rights reserved.Your Privacy Rights Terms and Conditions
von "Costco Business Center" <Costco@digital.costco.com> - 01:56 - 28 Mai 2026 -
How Integrity, Tough Conversations and Time Management Helped Me Succeed
How Integrity, Tough Conversations and Time Management Helped My Career Soar
Taylor Mark reveals how he’s grown personally and professionally throughout his career and at R.S. Hughes.R.S. Hughes delivers the certainty your business needs to thrive. With top-tier products, tailored solutions and a commitment to putting customers and supplier partners first, we help you succeed at every step.
Discover how our SupplySight™ Inventory Management Program can drive cost savings and
streamline your operations.FREE Ground Shipping on Online Orders of $249 or More*Never miss an R.S. Hughes email.Add solutions@rshughes.com to your address book.R.S. Hughes Co., Inc. | 1162 Sonora Ct. Sunnyvale, CA 94086
www.rshughes.com | 1-877-774-8443
von "R.S. Hughes" <solutions@rshughes.com> - 10:06 - 28 Mai 2026 -
Time is running out!
TECH REFRESHLimited time deals.Dell Pro 14 LaptopOffer ends soon!
Act fast! Refresh your tech with powerful PCs up to $850 off, earn Dell Rewards*, and enjoy fast, free shipping—all during this limited-time event.
DELL OUTLETBring Dell hardware home for less.Get the technology you want at a price you won’t believe. Plus, free shipping on all computers and monitors.DELL REWARDSDell Rewards members get 3% back in rewards* to use on future tech needs, plus don't miss out on exclusive offers.Special Financing OffersEnjoy 12 months special financingA on purchases $799 and unlock $50B Dell Rewards (5,000 bonus points) when you open a new Dell Pay Credit Account.Must enroll/be enrolled in the Dell Rewards Program. Valid through 7/29/2026.
This email advertisement was sent to info@turnpack.com
Dell Technologies Global Headquarters is located at One Dell Way, Round Rock, TX, 78682Copyright © 2026 Dell Inc. or its subsidiaries. All Rights Reserved. Dell Technologies, Dell and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners.This is a marketing/commercial email.Offers subject to change, not combinable with all other offers. Taxes, shipping, and other fees apply. Free shipping offer valid in Continental U.S. (excludes Alaska and P.O. Box addresses) and is for standard delivery method only. Offer not valid for Resellers. Dell reserves the right to cancel orders arising from pricing or other errors.Product Availability: Check Dell.com for the latest details on specific product availability & shipping dates.Returns: The 30-day return period is calculated from invoice date. Exceptions to Dell's standard return policy still apply, and certain products are not eligible for return at any time. Television returns are subject to restocking fees. See Dell.com/returnpolicy .Intel, the Intel logo, Intel Evo are trademarks of Intel Corporation or its subsidiaries.Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks are the property of their respective owners. Screens simulated, subject to change; Apps sold separately, availability may vary. Feature and app availability and experience may vary by market and device. Systems shown include Windows 11 Home. *Touch capable tablet or PC required. Pen accessory may be sold separately. **User must enable in settings and have a Bluetooth button on pen. 1Office may be sold separately.Student, Employee and Military discount is valid with select other offers, but not with other coupons. Offer does not apply to, and is not available with, systems or items purchased through refurbished items or spare parts. Purchase limit of 5 items per order. Not valid for resellers and/or online auctions. Dell reserves the right to cancel orders arising from pricing or other errors. Exclusions include: all limited quantity deals order codes, clearance offers, all warranties, gift cards, bundled items and other select electronics and accessories.*Dell Rewards: Rewards up to 9% excludes taxes and shipping. Base reward value is 3% back. 9% back is available on select Alienware monitors for a limited time (excludes Alienware 27 OLED Gaming Monitor - AW2726DM). Rewards expire at 11:59 PM HAST on the last day of the sixth month following the month in which they were earned. Outlet purchases do not qualify for rewards. The total amount of Rewards that can be earned each Dell fiscal quarter shall not exceed $2,000 in rewards. (The Dell fiscal calendar begins in February.) Expedited Delivery not available on certain monitors, batteries and adapters and is available in Continental (except Alaska) U.S. only. Other exceptions and restrictions apply. Not valid for resellers and/or online auctions. Offers and rewards subject to change without notice, not combinable with all other offers. See full program terms here.AMinimum payments are required for each Credit Plan. Valid for single transaction only. If the single transaction has multiple shipments, each shipment may result in a separate Credit Plan, subject to a separate minimum purchase requirement. Qualifying purchases will automatically be placed on a promotional plan. If purchase qualifies for more than one plan, it will be placed on the qualified plan with the longest promotional period.BTo join Dell Rewards, sign into your Dell Account (or create one) and select the box to join the Dell Rewards program. Your name and email is all you need to join. Offer will be received within 30 business days after Dell Pay Credit Account open date. This rewards program is provided by Dell and its terms may change at any time. For full Rewards Terms and Conditions, please see Dell.com/Rewards.Credit account offers are subject to credit approval.Dell Pay Credit Accounts are issued by Comenity Capital Bank
von "Dell Technologies" <Dell_Technologies@comms.dell.com> - 09:37 - 28 Mai 2026 -
sm23165dt: 1 NEW!
1 new: sm23165dt
You might also like
Want to turn off this email?
Your opinion matters. Rate this email:
Email Reference ID: [#ec6a8708f32e443ab4cd387ff31d7f9f]
Update your email preferences or learn about account protection.
If you have a question, contact us.eBay Inc., 2025 Hamilton Avenue, San Jose, CA 95125, United States
© 1995-2026 eBay Inc. or its affiliates
von "eBay" <ebay@ebay.com> - 08:41 - 28 Mai 2026 -
Confirmation for Your Order PO26211761
Thank you for your order. We will deliver your items on Friday between 10 am and 12 pm.Confirmation
Delivery address
Turnpack LLC
22425 S Scotland CT Ste 104
Queen Creek AZ 85142
Attention: Suite 104Billing address
Turnpack LLC
22425 S Scotland CT Ste 104
Queen Creek AZ 85142Delivery method
UPS GroundOrder date
5/27/2026Payment method
InvoicePlaced by
Christopher BergerMcMaster-Carr number
8018292PO26211761 Delivers May 29, 10 am - 12 pm 1 Snap Close Cable Holder
for 20 mm High Rail T-Slotted Framing
5537T8341
each3.69
each$3.69 2 Self-Aligning T-Slotted Framing Nuts
Spring Tab, Drop-in, for 1.5" and 40mm Rail, M8 Thread
5278N215
packs of 45.58
pack$27.90 3 T-Slotted Framing
Screw-on Bumper for 40 mm and 45 mm High Single Rail
6812N1392
each5.86
each$11.72 4 Gas Spring
M8 Thread Size, 7.4" Extended Length, 15 lbs. Force
4138T7314
each28.72
each$114.88 5 18-8 Stainless Steel Flanged Button Head Screw
M5 x 0.8 mm Thread, 12 mm Long
97654A3772
packs of 2515.53
pack$31.06 6 18-8 Stainless Steel Button Head Hex-Drive Screw
M6 x 1 mm Thread Size, 10 mm Long
92095A2241
pack of 5012.63
pack$12.63 7 18-8 Stainless Steel Button Head Hex-Drive Screw
M6 x 1 mm Thread Size, 8 mm Long
92095A2391
pack of 2511.05
pack$11.05 Merchandise 212.93 Shipping 12.89 Total $225.82 Your order is subject only to our terms and conditions, available at www.mcmaster.com or from our Sales Department. Phone: (562) 692-5911 Email: la.sales@mcmaster.com
von "McMaster-Carr" <la.sales@mcmaster.com> - 09:46 - 27 Mai 2026 -
RE: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
For sure! I’ll send a couple in the box for you to test. But yeah, I tried several of our toolholders on an older jig and a newer jig and they all showed the same issues.
I include an older jig as well (labeled) so you can compare to that as well. I’ll try to get this over and shipped out tomorrow!
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, May 27, 2026 4:45 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Garrett,
Not good, but we'll fix them no problem. We have tool holders here and tested them. The only thing I can think of is that ours are on the lower end of the diameter tolerance and yours are on the upper end. Either way send them back and we'll open them up by 130um. Can you also spare one of your toolholders to ensure we are good before returning them to you?
Chris
On Wed, May 27, 2026 at 4:35 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Sweet!
The other item that is more of a concern is that the holes that the tools sit inside of are basically the EXACT size of the tool holders themselves. I can pick up the tools in and out okay, but I have to push (with some decent force) each of the tools into the holes to fully seat them on the holder. I compared with the previous order of the tooling jigs and the tools are much easier to put into the holes and need zero force to sit correctly.
I attached a picture of the measurements I took of the holes in slot 7 on both jigs. The new order of jigs is ~130um smaller which is likely causing the seating issue. We will have a high risk of bending, rotating, or otherwise damaging the tools so we are not comfortable using these as is.
If I were to send all the jigs back, would you be able to machine a slightly larger hole? I can send a jig from a previous order to you or send an empty tool holder for you to test yourself if that helps, or I can take additional measurements as needed. We will have a high risk of bending, rotating, or otherwise damaging the tools so we are not comfortable using these as is. I definitely already rotated one of the tools as I was attempting to pull it off of the jig by hand ☹ Let me know!
Thanks!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, May 27, 2026 2:55 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Garrett,
Thanks for the update. You are correct that the set screws are adjustable to account for general tolerances of the toolbank assemblies within the machine. There are set screws for the left, right, and height adjustments. I'd suggest you dial in one and then match all the others; chances are they'll be very close. Let us know if you have any other questions.
Chris
On Wed, May 27, 2026 at 2:50 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
I looked at a few loading jigs, and testing them had some issues. I just found that the screws on either end was obstructing the loading, but I can just twist them more to fit. Each of the jigs have them twisted and sticking out at different lengths though. Is there a specific length they should be? Or should I just size them to slide easily in and out of the tool holders?
Just want to make sure these screws are for any other reason than easy loading/aligning to the tool holder itself 😊. I’ll go through the rest of them either today or tomorrow and let you know if I encounter any more issues.
Once I verify the other jigs are good to go, I’ll send the adapters back and shoot over the tracking number for you.Thanks!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, May 27, 2026 10:46 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Garrett,
Sorry about that. We do check them for flatness and vacuum seal so it would be best if you can ship them back for RCA and we'll fix it. Hope this doesn't delay your project.
Any issues with the Loading Jigs?
Chris
On Wed, May 27, 2026 at 10:34 AM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Hi Chris,
I went through the rest of the delivery and found 3 more that do not slide all the way into the tool (for a total of 4x). Physically they look similar, but may have some slight warpage issues causing these issues. Any ideas on how to fix this? I’m afraid of trying to bend them to fix the warpage. Would you like me to ship them back for you to take a look?
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Garrett Davidson
Sent: Wednesday, May 27, 2026 8:04 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsSorry, these are two SEPARATE adapters. I’m going through the other adapters now, and will let you know if I see any more issues!
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, May 27, 2026 7:58 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Garrett,
Thanks for the info. My fault on the partially engraved one, I was supposed to let you know but fell behind. We already have a replacement for that one in queue but I wanted to ship all 20 just in case you needed the full qty right away. Is this the same adapter you are having the issue with on the suction cup or is this a different one?
Chris
On Wed, May 27, 2026 at 7:50 AM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Unsure if this sent or if the full email did not send. I received a bunch of error messages.
Please find the video up in the fileXchange if you need!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Garrett Davidson
Sent: Tuesday, May 26, 2026 6:28 PM
To: 'Lorena Carrillo' <lcarrillo@turnpack.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Turnpack, LLC SO26141038' <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Chris/Turnpack,
I started opening up the box, and found an issue with one of the adapters:
As I slide the adapter into our tool, it stops here and does not allow us to slide it all the way to the vacuum port. The adapter itself seemed warped when placed on an optical table. I checked 5 more so far from the latest shipment and they all look good! Just this one is unable to slide in. I attached a video of myself trying to push it it and it not going all the way in without me having to physically lift the adapter into place and have a high risk of “confetti-ing” components in waffle packs. Let me know if it doesn’t come through. I also uploaded into our FileXchange system for you to review. Let me know if anyone needs access to this:
One of the 5 that I looked at after this one is missing most of the writing at the bottom of the adapter itself. Not a huge deal as it’s just cosmetic to us, but did want to let you know about it:
I will go through all the rest tomorrow morning and let you know if I encounter any more like this.
Can I send this one back to you to root cause or any ideas how to fix up? I could try to bend it but unsure how brittle the adapter itself is or if I’ll make it worse.
Thanks!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Garrett Davidson
Sent: Wednesday, May 20, 2026 4:23 PM
To: Lorena Carrillo <lcarrillo@turnpack.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Turnpack, LLC SO26141038' <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsThank you!!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Wednesday, May 20, 2026 4:20 PM
To: 'Christopher Berger' <cberger@turnpack.com>; Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: 'Turnpack, LLC SO26141038' <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHello Team, the order has shipped complete today. Here is your tracking number for reference. 872056271057
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, May 19, 2026 11:18 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Garrett,
We have the adapters back from anodizing but I slightly underestimated the assembly time. We are wrapping up the assembly today and tomorrow will be for engraving and testing and then we'll ship them out tomorrow.
The toolholder jigs are complete and ready to go.
Thanks
Chris
On Mon, May 18, 2026 at 4:29 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Hey Chris,
Were you able to ship out those parts? And have a tracking number if possible?
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, May 13, 2026 7:55 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsGarrett,
We experienced a slight delay because a machine was down, but parts are currently at anodizing. We are expediting that process, and then we anticipate two days for post-anodizing assembly & engraving. We might be able to ship it out Saturday, worst case it'll be Monday. I'll keep you posted when the parts come back from anodizing and then I should be able to confirm actual ship date.
Chris
On Wed, May 13, 2026 at 7:39 AM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Hey Chris,
Just checking if you think you’d be able to ship anything this week?
Thanks!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, April 28, 2026 4:54 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsPerfect. Thanks for confirming
On Tue, Apr 28, 2026 at 4:44 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Yeah that’s okay with me!
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, April 28, 2026 4:23 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsGarrett,
Yes. Example image below shows one side machined and the top not machined. If we machine all 4 sides they will all look like the side edge in the image below. Also, we did start with the adapters, once they are ready and in case the jigs are not I will let you know and we can do a partial shipment.
Thanks
Chris
On Tue, Apr 28, 2026 at 4:18 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Sorry, what do you mean by “Obscuring them”? would it “fog” the glass or make it not transparent?
The wafer pack adapters are a higher priority for us if possible! But no worries either way.
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, April 28, 2026 3:44 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Garrett,
Making good progress. As of now it looks like we'll ship the order the week of 05/11. We had a question about the tool holder jigs. We would prefer to machine them on multiple sides but doing so would obscure them. Reason being is that the stock material has significant tolerancing, so facing all sides would ensure greater consistency. Any objections to that?
Chris
On Tue, Apr 28, 2026 at 2:54 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Hey Chris,
Hope you are doing well! Do you have an ETA for this order? (PO#3714362)
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Chris Berger <info@turnpack.com>
Sent: Tuesday, April 7, 2026 9:03 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Subject: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Garrett, Attached is the quote for the adapters and loading jigs. Let me know if you need anything else. Chris Christopher Berger Phone: +1 [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏
SO26141038
$ 69,200.00
Expires on 05/07/2026
Hi Garrett,
Attached is the quote for the adapters and loading jigs. Let me know if you need anything else.
Chris
Christopher BergerTurnpack — Efficiency Redefined Through Automation
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
von Garrett Davidson - 07:56 - 27 Mai 2026 -
Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Hi Garrett,Not good, but we'll fix them no problem. We have tool holders here and tested them. The only thing I can think of is that ours are on the lower end of the diameter tolerance and yours are on the upper end. Either way send them back and we'll open them up by 130um. Can you also spare one of your toolholders to ensure we are good before returning them to you?ChrisOn Wed, May 27, 2026 at 4:35 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:Sweet!
The other item that is more of a concern is that the holes that the tools sit inside of are basically the EXACT size of the tool holders themselves. I can pick up the tools in and out okay, but I have to push (with some decent force) each of the tools into the holes to fully seat them on the holder. I compared with the previous order of the tooling jigs and the tools are much easier to put into the holes and need zero force to sit correctly.
I attached a picture of the measurements I took of the holes in slot 7 on both jigs. The new order of jigs is ~130um smaller which is likely causing the seating issue. We will have a high risk of bending, rotating, or otherwise damaging the tools so we are not comfortable using these as is.
If I were to send all the jigs back, would you be able to machine a slightly larger hole? I can send a jig from a previous order to you or send an empty tool holder for you to test yourself if that helps, or I can take additional measurements as needed. We will have a high risk of bending, rotating, or otherwise damaging the tools so we are not comfortable using these as is. I definitely already rotated one of the tools as I was attempting to pull it off of the jig by hand ☹ Let me know!
Thanks!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, May 27, 2026 2:55 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Garrett,
Thanks for the update. You are correct that the set screws are adjustable to account for general tolerances of the toolbank assemblies within the machine. There are set screws for the left, right, and height adjustments. I'd suggest you dial in one and then match all the others; chances are they'll be very close. Let us know if you have any other questions.
Chris
On Wed, May 27, 2026 at 2:50 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
I looked at a few loading jigs, and testing them had some issues. I just found that the screws on either end was obstructing the loading, but I can just twist them more to fit. Each of the jigs have them twisted and sticking out at different lengths though. Is there a specific length they should be? Or should I just size them to slide easily in and out of the tool holders?
Just want to make sure these screws are for any other reason than easy loading/aligning to the tool holder itself 😊. I’ll go through the rest of them either today or tomorrow and let you know if I encounter any more issues.
Once I verify the other jigs are good to go, I’ll send the adapters back and shoot over the tracking number for you.Thanks!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, May 27, 2026 10:46 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Garrett,
Sorry about that. We do check them for flatness and vacuum seal so it would be best if you can ship them back for RCA and we'll fix it. Hope this doesn't delay your project.
Any issues with the Loading Jigs?
Chris
On Wed, May 27, 2026 at 10:34 AM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Hi Chris,
I went through the rest of the delivery and found 3 more that do not slide all the way into the tool (for a total of 4x). Physically they look similar, but may have some slight warpage issues causing these issues. Any ideas on how to fix this? I’m afraid of trying to bend them to fix the warpage. Would you like me to ship them back for you to take a look?
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Garrett Davidson
Sent: Wednesday, May 27, 2026 8:04 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsSorry, these are two SEPARATE adapters. I’m going through the other adapters now, and will let you know if I see any more issues!
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, May 27, 2026 7:58 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Garrett,
Thanks for the info. My fault on the partially engraved one, I was supposed to let you know but fell behind. We already have a replacement for that one in queue but I wanted to ship all 20 just in case you needed the full qty right away. Is this the same adapter you are having the issue with on the suction cup or is this a different one?
Chris
On Wed, May 27, 2026 at 7:50 AM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Unsure if this sent or if the full email did not send. I received a bunch of error messages.
Please find the video up in the fileXchange if you need!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Garrett Davidson
Sent: Tuesday, May 26, 2026 6:28 PM
To: 'Lorena Carrillo' <lcarrillo@turnpack.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Turnpack, LLC SO26141038' <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Chris/Turnpack,
I started opening up the box, and found an issue with one of the adapters:
As I slide the adapter into our tool, it stops here and does not allow us to slide it all the way to the vacuum port. The adapter itself seemed warped when placed on an optical table. I checked 5 more so far from the latest shipment and they all look good! Just this one is unable to slide in. I attached a video of myself trying to push it it and it not going all the way in without me having to physically lift the adapter into place and have a high risk of “confetti-ing” components in waffle packs. Let me know if it doesn’t come through. I also uploaded into our FileXchange system for you to review. Let me know if anyone needs access to this:
One of the 5 that I looked at after this one is missing most of the writing at the bottom of the adapter itself. Not a huge deal as it’s just cosmetic to us, but did want to let you know about it:
I will go through all the rest tomorrow morning and let you know if I encounter any more like this.
Can I send this one back to you to root cause or any ideas how to fix up? I could try to bend it but unsure how brittle the adapter itself is or if I’ll make it worse.
Thanks!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Garrett Davidson
Sent: Wednesday, May 20, 2026 4:23 PM
To: Lorena Carrillo <lcarrillo@turnpack.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Turnpack, LLC SO26141038' <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsThank you!!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Wednesday, May 20, 2026 4:20 PM
To: 'Christopher Berger' <cberger@turnpack.com>; Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: 'Turnpack, LLC SO26141038' <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHello Team, the order has shipped complete today. Here is your tracking number for reference. 872056271057
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, May 19, 2026 11:18 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Garrett,
We have the adapters back from anodizing but I slightly underestimated the assembly time. We are wrapping up the assembly today and tomorrow will be for engraving and testing and then we'll ship them out tomorrow.
The toolholder jigs are complete and ready to go.
Thanks
Chris
On Mon, May 18, 2026 at 4:29 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Hey Chris,
Were you able to ship out those parts? And have a tracking number if possible?
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, May 13, 2026 7:55 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsGarrett,
We experienced a slight delay because a machine was down, but parts are currently at anodizing. We are expediting that process, and then we anticipate two days for post-anodizing assembly & engraving. We might be able to ship it out Saturday, worst case it'll be Monday. I'll keep you posted when the parts come back from anodizing and then I should be able to confirm actual ship date.
Chris
On Wed, May 13, 2026 at 7:39 AM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Hey Chris,
Just checking if you think you’d be able to ship anything this week?
Thanks!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, April 28, 2026 4:54 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsPerfect. Thanks for confirming
On Tue, Apr 28, 2026 at 4:44 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Yeah that’s okay with me!
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, April 28, 2026 4:23 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsGarrett,
Yes. Example image below shows one side machined and the top not machined. If we machine all 4 sides they will all look like the side edge in the image below. Also, we did start with the adapters, once they are ready and in case the jigs are not I will let you know and we can do a partial shipment.
Thanks
Chris
On Tue, Apr 28, 2026 at 4:18 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Sorry, what do you mean by “Obscuring them”? would it “fog” the glass or make it not transparent?
The wafer pack adapters are a higher priority for us if possible! But no worries either way.
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, April 28, 2026 3:44 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Garrett,
Making good progress. As of now it looks like we'll ship the order the week of 05/11. We had a question about the tool holder jigs. We would prefer to machine them on multiple sides but doing so would obscure them. Reason being is that the stock material has significant tolerancing, so facing all sides would ensure greater consistency. Any objections to that?
Chris
On Tue, Apr 28, 2026 at 2:54 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Hey Chris,
Hope you are doing well! Do you have an ETA for this order? (PO#3714362)
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Chris Berger <info@turnpack.com>
Sent: Tuesday, April 7, 2026 9:03 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Subject: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Garrett, Attached is the quote for the adapters and loading jigs. Let me know if you need anything else. Chris Christopher Berger Phone: +1 [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏
SO26141038
$ 69,200.00
Expires on 05/07/2026
Hi Garrett,
Attached is the quote for the adapters and loading jigs. Let me know if you need anything else.
Chris
Christopher BergerTurnpack — Efficiency Redefined Through Automation
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--Christopher Berger
von Chris Berger - 07:46 - 27 Mai 2026 -
RE: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Sweet!
The other item that is more of a concern is that the holes that the tools sit inside of are basically the EXACT size of the tool holders themselves. I can pick up the tools in and out okay, but I have to push (with some decent force) each of the tools into the holes to fully seat them on the holder. I compared with the previous order of the tooling jigs and the tools are much easier to put into the holes and need zero force to sit correctly.
I attached a picture of the measurements I took of the holes in slot 7 on both jigs. The new order of jigs is ~130um smaller which is likely causing the seating issue. We will have a high risk of bending, rotating, or otherwise damaging the tools so we are not comfortable using these as is.
If I were to send all the jigs back, would you be able to machine a slightly larger hole? I can send a jig from a previous order to you or send an empty tool holder for you to test yourself if that helps, or I can take additional measurements as needed. We will have a high risk of bending, rotating, or otherwise damaging the tools so we are not comfortable using these as is. I definitely already rotated one of the tools as I was attempting to pull it off of the jig by hand ☹ Let me know!
Thanks!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, May 27, 2026 2:55 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Garrett,
Thanks for the update. You are correct that the set screws are adjustable to account for general tolerances of the toolbank assemblies within the machine. There are set screws for the left, right, and height adjustments. I'd suggest you dial in one and then match all the others; chances are they'll be very close. Let us know if you have any other questions.
Chris
On Wed, May 27, 2026 at 2:50 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
I looked at a few loading jigs, and testing them had some issues. I just found that the screws on either end was obstructing the loading, but I can just twist them more to fit. Each of the jigs have them twisted and sticking out at different lengths though. Is there a specific length they should be? Or should I just size them to slide easily in and out of the tool holders?
Just want to make sure these screws are for any other reason than easy loading/aligning to the tool holder itself 😊. I’ll go through the rest of them either today or tomorrow and let you know if I encounter any more issues.
Once I verify the other jigs are good to go, I’ll send the adapters back and shoot over the tracking number for you.Thanks!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, May 27, 2026 10:46 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Garrett,
Sorry about that. We do check them for flatness and vacuum seal so it would be best if you can ship them back for RCA and we'll fix it. Hope this doesn't delay your project.
Any issues with the Loading Jigs?
Chris
On Wed, May 27, 2026 at 10:34 AM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Hi Chris,
I went through the rest of the delivery and found 3 more that do not slide all the way into the tool (for a total of 4x). Physically they look similar, but may have some slight warpage issues causing these issues. Any ideas on how to fix this? I’m afraid of trying to bend them to fix the warpage. Would you like me to ship them back for you to take a look?
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Garrett Davidson
Sent: Wednesday, May 27, 2026 8:04 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsSorry, these are two SEPARATE adapters. I’m going through the other adapters now, and will let you know if I see any more issues!
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, May 27, 2026 7:58 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Garrett,
Thanks for the info. My fault on the partially engraved one, I was supposed to let you know but fell behind. We already have a replacement for that one in queue but I wanted to ship all 20 just in case you needed the full qty right away. Is this the same adapter you are having the issue with on the suction cup or is this a different one?
Chris
On Wed, May 27, 2026 at 7:50 AM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Unsure if this sent or if the full email did not send. I received a bunch of error messages.
Please find the video up in the fileXchange if you need!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Garrett Davidson
Sent: Tuesday, May 26, 2026 6:28 PM
To: 'Lorena Carrillo' <lcarrillo@turnpack.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Turnpack, LLC SO26141038' <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Chris/Turnpack,
I started opening up the box, and found an issue with one of the adapters:
As I slide the adapter into our tool, it stops here and does not allow us to slide it all the way to the vacuum port. The adapter itself seemed warped when placed on an optical table. I checked 5 more so far from the latest shipment and they all look good! Just this one is unable to slide in. I attached a video of myself trying to push it it and it not going all the way in without me having to physically lift the adapter into place and have a high risk of “confetti-ing” components in waffle packs. Let me know if it doesn’t come through. I also uploaded into our FileXchange system for you to review. Let me know if anyone needs access to this:
One of the 5 that I looked at after this one is missing most of the writing at the bottom of the adapter itself. Not a huge deal as it’s just cosmetic to us, but did want to let you know about it:
I will go through all the rest tomorrow morning and let you know if I encounter any more like this.
Can I send this one back to you to root cause or any ideas how to fix up? I could try to bend it but unsure how brittle the adapter itself is or if I’ll make it worse.
Thanks!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Garrett Davidson
Sent: Wednesday, May 20, 2026 4:23 PM
To: Lorena Carrillo <lcarrillo@turnpack.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Turnpack, LLC SO26141038' <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsThank you!!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Wednesday, May 20, 2026 4:20 PM
To: 'Christopher Berger' <cberger@turnpack.com>; Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: 'Turnpack, LLC SO26141038' <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHello Team, the order has shipped complete today. Here is your tracking number for reference. 872056271057
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, May 19, 2026 11:18 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Garrett,
We have the adapters back from anodizing but I slightly underestimated the assembly time. We are wrapping up the assembly today and tomorrow will be for engraving and testing and then we'll ship them out tomorrow.
The toolholder jigs are complete and ready to go.
Thanks
Chris
On Mon, May 18, 2026 at 4:29 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Hey Chris,
Were you able to ship out those parts? And have a tracking number if possible?
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, May 13, 2026 7:55 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsGarrett,
We experienced a slight delay because a machine was down, but parts are currently at anodizing. We are expediting that process, and then we anticipate two days for post-anodizing assembly & engraving. We might be able to ship it out Saturday, worst case it'll be Monday. I'll keep you posted when the parts come back from anodizing and then I should be able to confirm actual ship date.
Chris
On Wed, May 13, 2026 at 7:39 AM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Hey Chris,
Just checking if you think you’d be able to ship anything this week?
Thanks!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, April 28, 2026 4:54 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsPerfect. Thanks for confirming
On Tue, Apr 28, 2026 at 4:44 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Yeah that’s okay with me!
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, April 28, 2026 4:23 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsGarrett,
Yes. Example image below shows one side machined and the top not machined. If we machine all 4 sides they will all look like the side edge in the image below. Also, we did start with the adapters, once they are ready and in case the jigs are not I will let you know and we can do a partial shipment.
Thanks
Chris
On Tue, Apr 28, 2026 at 4:18 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Sorry, what do you mean by “Obscuring them”? would it “fog” the glass or make it not transparent?
The wafer pack adapters are a higher priority for us if possible! But no worries either way.
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, April 28, 2026 3:44 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Garrett,
Making good progress. As of now it looks like we'll ship the order the week of 05/11. We had a question about the tool holder jigs. We would prefer to machine them on multiple sides but doing so would obscure them. Reason being is that the stock material has significant tolerancing, so facing all sides would ensure greater consistency. Any objections to that?
Chris
On Tue, Apr 28, 2026 at 2:54 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Hey Chris,
Hope you are doing well! Do you have an ETA for this order? (PO#3714362)
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Chris Berger <info@turnpack.com>
Sent: Tuesday, April 7, 2026 9:03 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Subject: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Garrett, Attached is the quote for the adapters and loading jigs. Let me know if you need anything else. Chris Christopher Berger Phone: +1 [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏
SO26141038
$ 69,200.00
Expires on 05/07/2026
Hi Garrett,
Attached is the quote for the adapters and loading jigs. Let me know if you need anything else.
Chris
Christopher BergerTurnpack — Efficiency Redefined Through Automation
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
von Garrett Davidson - 07:37 - 27 Mai 2026 -
Re: RFQ
Tony,That works for us! I'll get with Lorena on getting these ordered.
Thank you for your time.Best,IvanOn Wed, May 27, 2026 at 2:19 PM Tony Haynes <thaynes@flodraulicgroup.com> wrote:Hi Ivan,
We can square them; quote and lead time are the same. Let me know if that is satisfactory.
Best Regards,
Tony Haynes
Technical Sales Representative
FLODRAULIC
Cell 480.997.2852
Fax 480.921.3272
1150 N. FIESTA BLVD. GILBERT, AZ 85233
ISO 9001:2015 Registered
*** Important Notice: Send all Inquiries/Orders to our new Customer Service email address SWSales@flodraulicgroup.com***
From: Ivan Arevalo <iarevalo@turnpack.com>
Sent: Wednesday, May 27, 2026 9:49 AM
To: Tony Haynes <thaynes@flodraulicgroup.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Christopher Berger <cberger@turnpack.com>; Info at Turnpack <info@turnpack.com>
Subject: Re: RFQ
Hi Tony,
Yes, please square those up so we can get the caps on.
I'll get with Chris and Brandon to determine how we want to move forward.
Thanks,
Ivan
On Tue, May 26, 2026 at 10:57 AM Tony Haynes <thaynes@flodraulicgroup.com> wrote:Hi Ivan,
Here is the Simple Side Module Enclosure quote project number 26359M1 for Turnpack.We aligned the frames and connectors for the simple side module. Please review
Cost for Kit: $2,243.90 each
Cost for Assembled: $2,809.61 each
5-7 Days
Here is the base module top enclosure quote project number 26358M1 for Turnpack.*****The bars you want cover caps on are not square on the end so will not go on.
*****If you want them squared, we can square them up and then add the end caps.
Cost for Kit: $1,012.17 each
Cost for Assembled: $1,272.10 each
5-7 Days
Best Regards,Tony Haynes
Technical Sales Representative
FLODRAULIC
Cell 480.997.2852
Fax 480.921.3272
1150 N. FIESTA BLVD. GILBERT, AZ 85233
ISO 9001:2015 Registered
*** Important Notice: Send all Inquiries/Orders to our new Customer Service email address SWSales@flodraulicgroup.com***
From: Ivan Arevalo <iarevalo@turnpack.com>
Sent: Thursday, May 21, 2026 5:41 PM
To: Tony Haynes <thaynes@flodraulicgroup.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Christopher Berger <cberger@turnpack.com>; Info at Turnpack <info@turnpack.com>
Subject: RFQ
Hi Tony,
I've attached two .scene files for some extrusions that we would like pricing on below.
The Base Module Top Enclosure should have the flat edge of the 40x80 3E facing outward. In MAYCAD, it shows up red as an error but we just want the slotted sides to be facing inward toward the enclosure. Additionally, I couldn't get the rubber caps onto the ends of the angled top extrusions in MAYCAD, but we want rubber caps on those.
For the Simple Side Module Enclosure, do not quote the two "hurdles" that connect the back of the enclosure and the front 120x40 extrusion. Those are just placeholders to properly render the mating connection points. We also need additional mounting locations along the front extrusion for better support due to the extended length.
Please reach out with any questions or concerns.
Thank you for your assistance.
Best,Ivan
von Ivan Arevalo - 07:16 - 27 Mai 2026
