Informed Delivery
|
|||||||||||||||||||||||||||||
|
You might also like |
Your opinion matters. Rate this email:
Email Reference ID: [#b5a7b950b2a94e25a91da21c5b07f92f]
Update your email preferences or learn about account protection.
If you have a question, contact us.
eBay Inc., 2025 Hamilton Avenue, San Jose, CA 95125, United States
© 1995-2026 eBay Inc. or its affiliates
|
|
|
|
|
|
|
Good afternoon Lorena,
Thank you for the order with Watt Solutions!
You have new lower OEM pricing! Please update PO26221772 to match the attached Estimate 520522 and resend it to us for our records.
PO26221772 is in process and we will get back to you with the confirmed ship date and tracking number.
Ship To
Turnpack, LLC
22425 S Scotland Ct.
Suite 104
Queen Creek, AZ 85142 USA
Reference PO: PO26221772
Attention To: Lorena Carrillo
Ship Via: FedEx Ground, PP&A
Plant: STL
(Watlow’s contractual carrier for PP&A shipments has transitioned from UPS to FedEx and their system, unfortunately, doesn’t allow for 2nd day air.)
Scheduled Ship Date: Pending
3.00 EA CER-1-01-00541 ULTRAMIC CONFIGURATOR
Have a wonderful weekend!
Best Regards,
Dawna Uchtmann
Sales Representative
Watt Solutions
Thermal Systems … Embracing Complexity
14955 W. Bell Rd #9423
Surprise, AZ 85374
602-373-9663
duchtmann@watt.solutions (no .com)
http://www.watt.solutions/
Watt Solutions is your Expert Thermal Solutions Provider! Contact us when you need engineering, technical advice or require an extra hand toward commissioning your design or application. In addition, we are your "Value Added" thermal distributor & representative in the Southwest.
All proposed product designs, materials, constructions, systems, retrofits, part numbers, configurations and calculations contained in this email must be verified and confirmed by the receiver.
This e-mail message may contain privileged and/or confidential information, and is intended to be received only by persons entitled to receive such information. If you have received this e-mail in error, please notify the sender immediately. Please delete it and all attachments from any servers, hard drives or any other media. Other use of this e-mail by you is strictly prohibited. All e-mails and attachments sent and received are subject to monitoring, reading and archival by Watt Solutions. The recipient of this e-mail is solely responsible for checking for the presence of "Viruses" or other "Malware". Watt Solutions accepts no liability for any damage caused by any such code transmitted by or accompanying this e-mail or any attachment. The information contained in this email may be subject to the export control laws and regulations of the United States, potentially including but not limited to the Export Administration Regulations (EAR) and sanctions regulations issued by the U.S. Department of Treasury, Office of Foreign Asset Controls (OFAC). As a recipient of this information you are obligated to comply with all applicable U.S. export laws and regulations. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Watt Solutions.
From: Lorena Carrillo <info@turnpack.com>
Sent: Friday, June 5, 2026 5:07 PM
To: Uchtmann, Dawna <DUchtmann@watt.solutions>
Subject: Turnpack, LLC Order (Ref PO26221772)
Dear Dawna Uchtmann (Watt Solutions) Please find attached purchase order PO26221772 amounting in $ 2,442.48 from Turnpack, LLC as well as the [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏
|
|
|||
|
|
|||
|
|||
|
|
Dear Dawna Uchtmann (Watt Solutions)
Please find attached purchase order PO26221772 amounting in
$ 2,442.48 from Turnpack, LLC as well as the resale certificate, for your review and action.
The receipt is expected for 06/10/2026, if this date is not achievable, please reply with an available date for reconsideration.
**Please acknowledge the receipt of this order and lead time.
Turnpack — Efficiency Redefined Through Automation
RE: Order In Process & Estimate 520522 RE: Turnpack, LLC Order (Ref PO26221772)
Gotcha! If we ship on our fedex account can we do 2nd day air? 495276805
From: Uchtmann, Dawna <DUchtmann@watt.solutions>
Sent: Friday, June 5, 2026 6:40 PM
To: Turnpack, LLC PO26221772 <catchall@turnpack.com>
Cc: Uchtmann, Paul <PUchtmann@watt.solutions>
Subject: Order In Process & Estimate 520522 RE: Turnpack, LLC Order (Ref PO26221772)
Good afternoon Lorena,
Thank you for the order with Watt Solutions!
You have new lower OEM pricing! Please update PO26221772 to match the attached Estimate 520522 and resend it to us for our records.
PO26221772 is in process and we will get back to you with the confirmed ship date and tracking number.
Ship To
Turnpack, LLC
22425 S Scotland Ct.
Suite 104
Queen Creek, AZ 85142 USA
Reference PO: PO26221772
Attention To: Lorena Carrillo
Ship Via: FedEx Ground, PP&A
Plant: STL
(Watlow’s contractual carrier for PP&A shipments has transitioned from UPS to FedEx and their system, unfortunately, doesn’t allow for 2nd day air.)
Scheduled Ship Date: Pending
3.00 EA CER-1-01-00541 ULTRAMIC CONFIGURATOR
Have a wonderful weekend!
Best Regards,
Dawna Uchtmann
Sales Representative
Watt Solutions
Thermal Systems … Embracing Complexity
14955 W. Bell Rd #9423
Surprise, AZ 85374
602-373-9663
duchtmann@watt.solutions (no .com)
http://www.watt.solutions/
Watt Solutions is your Expert Thermal Solutions Provider! Contact us when you need engineering, technical advice or require an extra hand toward commissioning your design or application. In addition, we are your "Value Added" thermal distributor & representative in the Southwest.
All proposed product designs, materials, constructions, systems, retrofits, part numbers, configurations and calculations contained in this email must be verified and confirmed by the receiver.
This e-mail message may contain privileged and/or confidential information, and is intended to be received only by persons entitled to receive such information. If you have received this e-mail in error, please notify the sender immediately. Please delete it and all attachments from any servers, hard drives or any other media. Other use of this e-mail by you is strictly prohibited. All e-mails and attachments sent and received are subject to monitoring, reading and archival by Watt Solutions. The recipient of this e-mail is solely responsible for checking for the presence of "Viruses" or other "Malware". Watt Solutions accepts no liability for any damage caused by any such code transmitted by or accompanying this e-mail or any attachment. The information contained in this email may be subject to the export control laws and regulations of the United States, potentially including but not limited to the Export Administration Regulations (EAR) and sanctions regulations issued by the U.S. Department of Treasury, Office of Foreign Asset Controls (OFAC). As a recipient of this information you are obligated to comply with all applicable U.S. export laws and regulations. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Watt Solutions.
From: Lorena Carrillo <info@turnpack.com>
Sent: Friday, June 5, 2026 5:07 PM
To: Uchtmann, Dawna <DUchtmann@watt.solutions>
Subject: Turnpack, LLC Order (Ref PO26221772)
Dear Dawna Uchtmann (Watt Solutions) Please find attached purchase order PO26221772 amounting in $ 2,442.48 from Turnpack, LLC as well as the [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏
| |||
Dear Dawna Uchtmann (Watt Solutions)
Please find attached purchase order PO26221772 amounting in $ 2,442.48 from Turnpack, LLC as well as the resale certificate, for your review and action.
The receipt is expected for 06/10/2026, if this date is not achievable, please reply with an available date for reconsideration.
**Please acknowledge the receipt of this order and lead time.
Turnpack — Efficiency Redefined Through Automation
Lorena,
PO26221772 is scheduled to ship on 12-Jun-2026.
Scheduled Ship Date: 12-Jun-2026
3.00 EA CER-1-01-00541 ULTRAMIC CONFIGURATOR
Have a happy Monday!
Best Regards,
Dawna Uchtmann
Sales Representative
Watt Solutions
Thermal Systems … Embracing Complexity
14955 W. Bell Rd #9423
Surprise, AZ 85374
602-373-9663
duchtmann@watt.solutions (no .com)
http://www.watt.solutions/
Watt Solutions is your Expert Thermal Solutions Provider! Contact us when you need engineering, technical advice or require an extra hand toward commissioning your design or application. In addition, we are your "Value Added" thermal distributor & representative in the Southwest.
All proposed product designs, materials, constructions, systems, retrofits, part numbers, configurations and calculations contained in this email must be verified and confirmed by the receiver.
This e-mail message may contain privileged and/or confidential information, and is intended to be received only by persons entitled to receive such information. If you have received this e-mail in error, please notify the sender immediately. Please delete it and all attachments from any servers, hard drives or any other media. Other use of this e-mail by you is strictly prohibited. All e-mails and attachments sent and received are subject to monitoring, reading and archival by Watt Solutions. The recipient of this e-mail is solely responsible for checking for the presence of "Viruses" or other "Malware". Watt Solutions accepts no liability for any damage caused by any such code transmitted by or accompanying this e-mail or any attachment. The information contained in this email may be subject to the export control laws and regulations of the United States, potentially including but not limited to the Export Administration Regulations (EAR) and sanctions regulations issued by the U.S. Department of Treasury, Office of Foreign Asset Controls (OFAC). As a recipient of this information you are obligated to comply with all applicable U.S. export laws and regulations. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Watt Solutions.
From: Uchtmann, Dawna
Sent: Friday, June 5, 2026 6:40 PM
To: Turnpack, LLC PO26221772 <catchall@turnpack.com>
Cc: Uchtmann, Paul <PUchtmann@watt.solutions>
Subject: Order In Process & Estimate 520522 RE: Turnpack, LLC Order (Ref PO26221772)
Good afternoon Lorena,
Thank you for the order with Watt Solutions!
You have new lower OEM pricing! Please update PO26221772 to match the attached Estimate 520522 and resend it to us for our records.
PO26221772 is in process and we will get back to you with the confirmed ship date and tracking number.
Ship To
Turnpack, LLC
22425 S Scotland Ct.
Suite 104
Queen Creek, AZ 85142 USA
Reference PO: PO26221772
Attention To: Lorena Carrillo
Ship Via: FedEx Ground, PP&A
Plant: STL
(Watlow’s contractual carrier for PP&A shipments has transitioned from UPS to FedEx and their system, unfortunately, doesn’t allow for 2nd day air.)
Scheduled Ship Date: Pending
3.00 EA CER-1-01-00541 ULTRAMIC CONFIGURATOR
Have a wonderful weekend!
Best Regards,
Dawna Uchtmann
Sales Representative
Watt Solutions
Thermal Systems … Embracing Complexity
14955 W. Bell Rd #9423
Surprise, AZ 85374
602-373-9663
duchtmann@watt.solutions (no .com)
http://www.watt.solutions/
Watt Solutions is your Expert Thermal Solutions Provider! Contact us when you need engineering, technical advice or require an extra hand toward commissioning your design or application. In addition, we are your "Value Added" thermal distributor & representative in the Southwest.
All proposed product designs, materials, constructions, systems, retrofits, part numbers, configurations and calculations contained in this email must be verified and confirmed by the receiver.
This e-mail message may contain privileged and/or confidential information, and is intended to be received only by persons entitled to receive such information. If you have received this e-mail in error, please notify the sender immediately. Please delete it and all attachments from any servers, hard drives or any other media. Other use of this e-mail by you is strictly prohibited. All e-mails and attachments sent and received are subject to monitoring, reading and archival by Watt Solutions. The recipient of this e-mail is solely responsible for checking for the presence of "Viruses" or other "Malware". Watt Solutions accepts no liability for any damage caused by any such code transmitted by or accompanying this e-mail or any attachment. The information contained in this email may be subject to the export control laws and regulations of the United States, potentially including but not limited to the Export Administration Regulations (EAR) and sanctions regulations issued by the U.S. Department of Treasury, Office of Foreign Asset Controls (OFAC). As a recipient of this information you are obligated to comply with all applicable U.S. export laws and regulations. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Watt Solutions.
From: Lorena Carrillo <info@turnpack.com>
Sent: Friday, June 5, 2026 5:07 PM
To: Uchtmann, Dawna <DUchtmann@watt.solutions>
Subject: Turnpack, LLC Order (Ref PO26221772)
Dear Dawna Uchtmann (Watt Solutions) Please find attached purchase order PO26221772 amounting in $ 2,442.48 from Turnpack, LLC as well as the [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏
|
|
|||
|
|
|||
|
|||
|
|
Dear Dawna Uchtmann (Watt Solutions)
Please find attached purchase order PO26221772 amounting in
$ 2,442.48 from Turnpack, LLC as well as the resale certificate, for your review and action.
The receipt is expected for 06/10/2026, if this date is not achievable, please reply with an available date for reconsideration.
**Please acknowledge the receipt of this order and lead time.
Turnpack — Efficiency Redefined Through Automation
| |||||||||||||||
| |||||||||||||||
| |||||||||||||||
| |||||||||||||||
| Your order is subject only to our terms and conditions, available at www.mcmaster.com or from our Sales Department. | |||||||||||||||
| |||||||||||||||
RFQ
| Items Needing Powder Coating: | QTY: | Size (LxWxH) [mm]: |
| Flex Bin Cover | 2 | 200x3.175x200 |
| JNJ Upper Electical Panel | 1 | 900x175x265 |
| JNJ Side Module Front Panel 2 | 2 | 740x3.67x745 |
| JNJ Side Module Front Panel 1 | 2 | 766.5x3.67x745 |
| JNJ Light Curtain Top Bracket | 1 | 880x80x100 |
| JNJ Light Curtain Bottom Bracket | 1 | 880x75x148 |
| JNJ GX4 Rear Cover | 1 | 121x158x240 |
| Flex Bin | 2 | 204x212x347 |
| Electrical Panel_Side Module | 2 | 615x4.763x520 |
| Controller Panel | 1 | 900x4.763x285 |
| Lower Power Cabinet Drawer | 1 | 683x12.7x468 |
| Side Module Interface Plate | 2 | 1477x6.35x610 |
Fwd: RFQ
Hi Alec,We are starting to move towards getting our parts ready for powder coating. I just wanted to confirm if the turnaround times have changed as per our prior conversation.Thanks,IvanOn Fri, Jun 5, 2026 at 5:25 PM Alec Convery <sales@matadorcoatings.com> wrote:
Items Needing Powder Coating: QTY: Size (LxWxH) [mm]: Flex Bin Cover 2 200x3.175x200 - $10.00 JNJ Upper Electical Panel 1 900x175x265 - $40.00 JNJ Side Module Front Panel 2 2 740x3.67x745 - $ 50.00 JNJ Side Module Front Panel 1 2 766.5x3.67x745 - $50.00 JNJ Light Curtain Top Bracket 1 880x80x100 - $30 JNJ Light Curtain Bottom Bracket 1 880x75x148 - $35 JNJ GX4 Rear Cover 1 121x158x240 - $15 Flex Bin 2 204x212x347 - $25 Electrical Panel_Side Module 2 615x4.763x520 - $30 Controller Panel 1 900x4.763x285 - $40 Lower Power Cabinet Drawer 1 683x12.7x468 - $35 Side Module Interface Plate 2 1477x6.35x610 - $60 Turn around time right now is about 2 weeks. Expediting would take 1 week and incur an added $150 fee.00Let me know if you have any questionsOn Fri, Jun 5, 2026 at 5:24 PM Ivan Arevalo <iarevalo@turnpack.com> wrote:Hello,It's Ivan again from Turnpack with another request for powder coating on a few large items. We would like textured black powder coating on all items.
Items Needing Powder Coating: QTY: Size (LxWxH) [mm]: Flex Bin Cover 2 200x3.175x200 JNJ Upper Electical Panel 1 900x175x265 JNJ Side Module Front Panel 2 2 740x3.67x745 JNJ Side Module Front Panel 1 2 766.5x3.67x745 JNJ Light Curtain Top Bracket 1 880x80x100 JNJ Light Curtain Bottom Bracket 1 880x75x148 JNJ GX4 Rear Cover 1 121x158x240 Flex Bin 2 204x212x347 Electrical Panel_Side Module 2 615x4.763x520 Controller Panel 1 900x4.763x285 Lower Power Cabinet Drawer 1 683x12.7x468 Side Module Interface Plate 2 1477x6.35x610 Please let us know the pricing for all components and the turnaround time for both standard and expedited service, if possible. Let me know if you have any questions or concerns.Thank you for your time.Best,Ivan
Fwd: RFQ
| Items Needing Powder Coating: | QTY: | Size (LxWxH) [mm]: |
| Flex Bin Cover | 2 | 200x3.175x200 - $10.00 |
| JNJ Upper Electical Panel | 1 | 900x175x265 - $40.00 |
| JNJ Side Module Front Panel 2 | 2 | 740x3.67x745 - $ 50.00 |
| JNJ Side Module Front Panel 1 | 2 | 766.5x3.67x745 - $50.00 |
| JNJ Light Curtain Top Bracket | 1 | 880x80x100 - $30 |
| JNJ Light Curtain Bottom Bracket | 1 | 880x75x148 - $35 |
| JNJ GX4 Rear Cover | 1 | 121x158x240 - $15 |
| Flex Bin | 2 | 204x212x347 - $25 |
| Electrical Panel_Side Module | 2 | 615x4.763x520 - $30 |
| Controller Panel | 1 | 900x4.763x285 - $40 |
| Lower Power Cabinet Drawer | 1 | 683x12.7x468 - $35 |
| Side Module Interface Plate | 2 | 1477x6.35x610 - $60 |
Hello,It's Ivan again from Turnpack with another request for powder coating on a few large items. We would like textured black powder coating on all items.
Items Needing Powder Coating: QTY: Size (LxWxH) [mm]: Flex Bin Cover 2 200x3.175x200 JNJ Upper Electical Panel 1 900x175x265 JNJ Side Module Front Panel 2 2 740x3.67x745 JNJ Side Module Front Panel 1 2 766.5x3.67x745 JNJ Light Curtain Top Bracket 1 880x80x100 JNJ Light Curtain Bottom Bracket 1 880x75x148 JNJ GX4 Rear Cover 1 121x158x240 Flex Bin 2 204x212x347 Electrical Panel_Side Module 2 615x4.763x520 Controller Panel 1 900x4.763x285 Lower Power Cabinet Drawer 1 683x12.7x468 Side Module Interface Plate 2 1477x6.35x610 Please let us know the pricing for all components and the turnaround time for both standard and expedited service, if possible. Let me know if you have any questions or concerns.Thank you for your time.Best,Ivan
Re: RFQ
Two week turnaround time, $150 aditional charge for one week.---------- Forwarded message ---------
From: Alec Convery <sales@matadorcoatings.com>
Date: Fri, Jun 5, 2026 at 5:25 PM
Subject: Re: RFQ
To: Ivan Arevalo <iarevalo@turnpack.com>
Items Needing Powder Coating: QTY: Size (LxWxH) [mm]: Flex Bin Cover 2 200x3.175x200 - $10.00 JNJ Upper Electical Panel 1 900x175x265 - $40.00 JNJ Side Module Front Panel 2 2 740x3.67x745 - $ 50.00 JNJ Side Module Front Panel 1 2 766.5x3.67x745 - $50.00 JNJ Light Curtain Top Bracket 1 880x80x100 - $30 JNJ Light Curtain Bottom Bracket 1 880x75x148 - $35 JNJ GX4 Rear Cover 1 121x158x240 - $15 Flex Bin 2 204x212x347 - $25 Electrical Panel_Side Module 2 615x4.763x520 - $30 Controller Panel 1 900x4.763x285 - $40 Lower Power Cabinet Drawer 1 683x12.7x468 - $35 Side Module Interface Plate 2 1477x6.35x610 - $60 Turn around time right now is about 2 weeks. Expediting would take 1 week and incur an added $150 fee.00Let me know if you have any questionsOn Fri, Jun 5, 2026 at 5:24 PM Ivan Arevalo <iarevalo@turnpack.com> wrote:Hello,It's Ivan again from Turnpack with another request for powder coating on a few large items. We would like textured black powder coating on all items.
Items Needing Powder Coating: QTY: Size (LxWxH) [mm]: Flex Bin Cover 2 200x3.175x200 JNJ Upper Electical Panel 1 900x175x265 JNJ Side Module Front Panel 2 2 740x3.67x745 JNJ Side Module Front Panel 1 2 766.5x3.67x745 JNJ Light Curtain Top Bracket 1 880x80x100 JNJ Light Curtain Bottom Bracket 1 880x75x148 JNJ GX4 Rear Cover 1 121x158x240 Flex Bin 2 204x212x347 Electrical Panel_Side Module 2 615x4.763x520 Controller Panel 1 900x4.763x285 Lower Power Cabinet Drawer 1 683x12.7x468 Side Module Interface Plate 2 1477x6.35x610 Please let us know the pricing for all components and the turnaround time for both standard and expedited service, if possible. Let me know if you have any questions or concerns.Thank you for your time.Best,Ivan
FedEx
|
FedEx
|
|
|
|
Dear Customer,
Based on your usage through June 04, 2026 for SRP electric account ***-**9-002 at 22425 S SCOTLAND CT SU 104 your June bill is projected to be approximately $555.00. The bill estimate exceeds the threshold you set in My Account.
If you have questions, please contact us at (602) 236-8833, Monday through Friday, 7 a.m.-5 p.m, or by e-mail at commercl@srpnet.com
Thank you for being a valued SRP business customer.
SRP Customer Services
| Find us on: |
|
|
|
|
Fwd: Contact Request
Hello Ivan,
Great to hear from you again & yes, the pricing is still valid. The only update is that we currently have 741 units (7540 008.001) in stock.
If you’d like to place an order, please complete the following form: https://www.ultracarbide.com/Account/newcustomer We will need a copy of your W-9 and Tax Exempt Certificate.
Initial orders can be processed via credit card (Visa, MasterCard, or Discover). If you choose to apply for terms, we can review your references afterward.
Setting up an account will also give you access to our online portal, where you can check stock, view pricing, and place orders 24/7.
Please let us know if you have any questions.
Thank you,
Eric Smith
Sr. Sales Engineer
Ultra Carbide, LLC.
Novi Office: 248-446-1744
Mobile/Text/WhatsApp: 248-653-4012
eFax: 248-692-0494
Email: eric.smith@ultracarbide.com
Notice: Our German plants will be closed from May 25 until June 8, 2026, for a comprehensive SAP system upgrade. During this period, shipments of new stock and special quotations will be temporarily paused. This upgrade is an important step toward improving efficiency and enhancing service for our customers.
This email/fax and any files transmitted with it are confidential and intended solely for the individual or entity to whom they are addressed. If you have received this email/fax in error, please notify sales@ultracarbide.com.
From: Ivan Arevalo <iarevalo@turnpack.com>
Sent: Friday, June 5, 2026 12:39 PM
To: Eric Smith <Eric.Smith@ultracarbide.com>
Subject: Re: Contact Request
CAUTION: This email originated from outside of Ultra Carbide. DO NOT click on links or open attachments unless you were expecting the email, recognize the sender, and know the content is safe.
Hi Eric,
Deepest apologies for the delayed reply. Is the pricing you provided still valid today?
The length shouldn't be a problem. I had originally thought it would be, but a recent consultation with our engineer revealed longer lengths are not an issue for our manufacturer.
Thank you for your time.
Best,
Ivan
On Fri, May 15, 2026 at 9:14 AM Eric Smith <Eric.Smith@ultracarbide.com> wrote:
Good Afternoon Ivan,
Apologies for the delayed response—I’ve been out of the office for most of the week.
We currently have the following item available in our catalog:
7540 008.001
8.00 mm x 64.20 mm OAL Milling Cutter Blank (Metric Diameter), chamfered on one end, ground to h6 tolerance, DK 460UF (10% Co.), fixed length
- 1,000+ pieces in stock
- $29.77 each (+13% tariff, invoiced as a separate line item)
- Total effective price: $33.64 each
If this overall length does not meet your requirements, we can explore having the blanks cut to size by a grinding partner here in the U.S. (we do not offer in-house cutting or grinding). Alternatively, we can check with the plant on producing them to your specifications from scratch; however, please keep in mind that either option will likely increase the price.
Please let me know how you would like to proceed.
Thank you,
Eric Smith
Sr. Sales Engineer
Ultra Carbide, LLC.
Novi Office: 248-446-1744
Mobile/Text/WhatsApp: 248-653-4012
eFax: 248-692-0494
Email: eric.smith@ultracarbide.com
This email/fax and any files transmitted with it are confidential and intended solely for the individual or entity to whom they are addressed. If you have received this email/fax in error, please notify sales@ultracarbide.com.
From: Ivan Arevalo <iarevalo@turnpack.com>
Sent: Tuesday, May 12, 2026 4:24 PM
To: service@qualitycarbide.com
Cc: Eric Smith <Eric.Smith@ultracarbide.com>
Subject: Re: Contact Request
CAUTION: This email originated from outside of Ultra Carbide. DO NOT click on links or open attachments unless you were expecting the email, recognize the sender, and know the content is safe.
Thank you Michael,
Eric, I'm viewing your site at the moment and I see you have 8mm blank milling rods but not in the lengths that we need. Is there any way we could get them cut to 63.5mm? If so, how would that change the pricing of a quotation?
Thank you for your time,
Ivan
On Tue, May 12, 2026 at 12:41 PM Michael Saad <service@qualitycarbide.com> wrote:
Hi, Ivan.
You would be better served by going to a different type of manufacturer than us for this particular product.
I recommend Ultra-Carbide for this.
Eric Smith is my contact.
eric.smith@ultracarbide.com
Eric is CC'd in this email.
Thank you.
Best Regards,
Michael Saad
------------
President
Quality Carbide Metals, Incorporated
1611 Southport Road, Spartanburg, SC 29306 USA
www.qualitycarbide.com
PH:864-585-3939
-----Original Message-----
From: Quality Carbide <no-reply@qualitycarbide.com>
Sent: Tuesday, May 12, 2026 2:57 PM
To: service@qualitycarbide.com
Subject: Contact Request
Name: Ivan Arevalo
Email: iarevalo@turnpack.com
Subject: RFQ; Blank Carbide Rods
Company: Turnpack
Message:
Hello ! Our company is seeking carbide blanks to be turned into end mills for precision machining.
We ask for 8mm diameter by 63.5mm length round blank rods that are Grade 2210 (10% cobalt), Grounded, h6 tolerance, and chamfered on one end 45 degrees. These should also be made with virgin material. We plan to order a quantity of 130, but if larger quantities (200, 300, 400) can reduce total cost, we would like to see what options are available, thanks.
Disclaimer
The information contained in this communication from the sender is confidential. It is intended solely for use by the recipient and others authorized to receive it. If you are not the recipient, you are hereby notified that any disclosure, copying, distribution or taking action in relation of the contents of this information is strictly prohibited and may be unlawful.
This email has been scanned for viruses and malware, and may have been automatically archived.
Disclaimer
The information contained in this communication from the sender is confidential. It is intended solely for use by the recipient and others authorized to receive it. If you are not the recipient, you are hereby notified that any disclosure, copying, distribution or taking action in relation of the contents of this information is strictly prohibited and may be unlawful.
This email has been scanned for viruses and malware, and may have been automatically archived.
Fwd: New Entry: Contact Form - 1
Mike Zinda
True North Diversified | VP Sales – Prodex / Centennial Carbide
651-246-6536 | https://www.thetruenorthfamily.com/
True North Diversified | We elevate business operations
Hello Ivan,Thanks for the reply.
No worries on the missed call. I figured I was calling a little early.
If you would like to place an order. Please provide all your company information to me. We typically use a credit card for the first order.
Let me know what info you would need from us to get the order going.
Mike Zinda
True North Diversified | VP Sales – Prodex / Centennial Carbide
651-246-6536 | https://www.thetruenorthfamily.com/
True North Diversified | We elevate business operations
From: Ivan Arevalo <iarevalo@turnpack.com>
Sent: Wednesday, June 3, 2026 12:08 PM
To: Mike Zinda <mikez@tndiversified.com>
Cc: Info <info@centennialcarbide.com>
Subject: Re: New Entry: Contact Form - 1Hi Mike,
Thanks for the information. Sorry I missed your call; I wasn't in the office. We're located in Arizona so by the time you called I was barely leaving my house.
I must check with the engineer who created the drawings to see if that 63mm length can work for us.
Once we figure that out, how do we proceed on ordering ?
Thanks,
Ivan
On Wed, Jun 3, 2026 at 7:50 AM Mike Zinda <mikez@tndiversified.com> wrote:Hello Ivan,Please disregard my previous message regarding what you were looking for.
Per my voice message, I have two options for you below:
8mm x 63mm, 10% ground w/chamferQty 100 @ $24.49/eaQty 200 @ $24.04/eaStock
8mm x 63.5mm, 10% ground w/chamferQty 100 @ $38.11/eaQty 200 @ $37.54/eaStock
Please reference quote# Q60326-2
Please let me know if you have any further questions. Looking forward to your response.
Have a great day,Mike Zinda
True North Diversified | VP Sales – Prodex / Centennial Carbide
651-246-6536 | https://www.thetruenorthfamily.com/
True North Diversified | We elevate business operations
From: Mike Zinda <mikez@tndiversified.com>
Sent: Wednesday, June 3, 2026 8:07 AM
To: Info <info@centennialcarbide.com>; iarevalo@turnpack.com <iarevalo@turnpack.com>
Subject: Re: New Entry: Contact Form - 1Good morning, Ivan,I hope the week is treating you well.
We appreciate the opportunity.
Are you just looking for the blank rod?
Best regards,Mike Zinda
True North Diversified | VP Sales – Prodex / Centennial Carbide
651-246-6536 | https://www.thetruenorthfamily.com/
True North Diversified | We elevate business operations
From: Centennial Carbide <info@centennialcarbide.com>
Sent: Tuesday, June 2, 2026 8:09 PM
To: Info <info@centennialcarbide.com>
Subject: New Entry: Contact Form - 1
Diameter: 8 mm
Length: 63.5 mm
Grade: Comparable to Grade 2210 (10% cobalt)
Material: Virgin carbide
Condition: Ground, h6 tolerance
Chamfer: 45° on one end
I have also attached Files of the tooling bit we have these made into, if that is possible on your end.
Let me know if any other info is required, we plan to order between 100-200 of these.
Thanks,
Ivan Arevalo
TurnpackASH08SF.pdf
Sent from Centennial Carbide: Carbide Blanks, Rod and End Mills
FedEx
|
Please do not respond to this message. This email was sent from an unattended mailbox. This report was generated at approximately 3:28 PM CDT 06/05/2026.
