2. Mailinglisten
  3. Info Inbox
  4. Re: Sleeves to quote

Archive

Info Inbox

info@turnpack.com

Re: Sleeves to quote

It's 0.032" thick 

On Wed, Apr 22, 2026, 11:05 AM Christie Albone <christie@wirefab.com> wrote:

Hi George,

 

Thank you for sending this over. It was a pleasure speaking with you yesterday.

 

Can you please confirm the material gauge? I do not see it specified on the drawing.

 

Best,

Christie

 

Christie Albone | Wirefab Inc.

Director of Sales & Marketing

T: (508) 754-5359 x 105

 

From: George Bloom <reworktech1@gmail.com>
Sent: Tuesday, April 21, 2026 2:45 PM
To: Info <Info@wirefab.com>
Cc: Info @ Turnpack <info@turnpack.com>
Subject: Sleeves to quote

 

Hi Christie with an ie,

 

Here is the print for the part we just spoke about. We'd be looking for you to roll and tig weld them.

Can you quote 10, 20 and 50 pieces?

 

The principal company is Turnpack in Queen Creek, AZ

The contact there is Lorena. So, can you send her the quote and copy me on it?

 

Thanks,

George Bloom

Rework Tech

781-640-7886

von George Bloom - 11:06 - 22 Apr. 2026

Folgenachrichten

  • RE: Sleeves to quote

    Hi George,

     

    Thank you for this information.

     

    After evaluating the requirements, unfortunately we will not be able to provide a quote. Our current machinery is too large to effectively form the sleeve, and the material gauge is also slightly below our practical forming range for this application.

     

    I appreciate you reaching out for this project and hope we can support you on future opportunities that are a better fit for our capabilities.

     

    Best,

    Christie

     

    Christie Albone | Wirefab Inc.

    Director of Sales & Marketing

    T: (508) 754-5359 x 105

     

    From: George Bloom <reworktech1@gmail.com>
    Sent: Wednesday, April 22, 2026 11:06 AM
    To: Christie Albone <christie@wirefab.com>
    Cc: Info @ Turnpack <info@turnpack.com>
    Subject: Re: Sleeves to quote

     

    It's 0.032" thick 

     

    On Wed, Apr 22, 2026, 11:05 AM Christie Albone <christie@wirefab.com> wrote:

    Hi George,

     

    Thank you for sending this over. It was a pleasure speaking with you yesterday.

     

    Can you please confirm the material gauge? I do not see it specified on the drawing.

     

    Best,

    Christie

     

    Christie Albone | Wirefab Inc.

    Director of Sales & Marketing

    T: (508) 754-5359 x 105

     

    From: George Bloom <reworktech1@gmail.com>
    Sent: Tuesday, April 21, 2026 2:45 PM
    To: Info <Info@wirefab.com>
    Cc: Info @ Turnpack <info@turnpack.com>
    Subject: Sleeves to quote

     

    Hi Christie with an ie,

     

    Here is the print for the part we just spoke about. We'd be looking for you to roll and tig weld them.

    Can you quote 10, 20 and 50 pieces?

     

    The principal company is Turnpack in Queen Creek, AZ

    The contact there is Lorena. So, can you send her the quote and copy me on it?

     

    Thanks,

    George Bloom

    Rework Tech

    781-640-7886



    Links contained in this email have been replaced. If you click on a link in the email above, the link will be analyzed for known threats. If a known threat is found, you will not be able to proceed to the destination. If suspicious content is detected, you will see a warning.

    von "Christie Albone" <christie@wirefab.com> - 03:41 - 22 Apr. 2026

Referenz

  • RE: Sleeves to quote

    Hi George,

     

    Thank you for sending this over. It was a pleasure speaking with you yesterday.

     

    Can you please confirm the material gauge? I do not see it specified on the drawing.

     

    Best,

    Christie

     

    Christie Albone | Wirefab Inc.

    Director of Sales & Marketing

    T: (508) 754-5359 x 105

     

    From: George Bloom <reworktech1@gmail.com>
    Sent: Tuesday, April 21, 2026 2:45 PM
    To: Info <Info@wirefab.com>
    Cc: Info @ Turnpack <info@turnpack.com>
    Subject: Sleeves to quote

     

    Hi Christie with an ie,

     

    Here is the print for the part we just spoke about. We'd be looking for you to roll and tig weld them.

    Can you quote 10, 20 and 50 pieces?

     

    The principal company is Turnpack in Queen Creek, AZ

    The contact there is Lorena. So, can you send her the quote and copy me on it?

     

    Thanks,

    George Bloom

    Rework Tech

    10 Tower Office Park

    Suite 606

    Woburn, MA 01801

    781-640-7886

    von "Christie Albone" <christie@wirefab.com> - 11:06 - 22 Apr. 2026

    1 Antworten 1 Antworten

    • Re: Sleeves to quote
      It's 0.032" thick 

      On Wed, Apr 22, 2026, 11:05 AM Christie Albone <christie@wirefab.com> wrote:

      Hi George,

       

      Thank you for sending this over. It was a pleasure speaking with you yesterday.

       

      Can you please confirm the material gauge? I do not see it specified on the drawing.

       

      Best,

      Christie

       

      Christie Albone | Wirefab Inc.

      Director of Sales & Marketing

      T: (508) 754-5359 x 105

       

      From: George Bloom <reworktech1@gmail.com>
      Sent: Tuesday, April 21, 2026 2:45 PM
      To: Info <Info@wirefab.com>
      Cc: Info @ Turnpack <info@turnpack.com>
      Subject: Sleeves to quote

       

      Hi Christie with an ie,

       

      Here is the print for the part we just spoke about. We'd be looking for you to roll and tig weld them.

      Can you quote 10, 20 and 50 pieces?

       

      The principal company is Turnpack in Queen Creek, AZ

      The contact there is Lorena. So, can you send her the quote and copy me on it?

       

      Thanks,

      George Bloom

      Rework Tech

      781-640-7886

      von George Bloom - 11:06 - 22 Apr. 2026

      1 Antworten 1 Antworten

      • RE: Sleeves to quote

        Hi George,

         

        Thank you for this information.

         

        After evaluating the requirements, unfortunately we will not be able to provide a quote. Our current machinery is too large to effectively form the sleeve, and the material gauge is also slightly below our practical forming range for this application.

         

        I appreciate you reaching out for this project and hope we can support you on future opportunities that are a better fit for our capabilities.

         

        Best,

        Christie

         

        Christie Albone | Wirefab Inc.

        Director of Sales & Marketing

        T: (508) 754-5359 x 105

         

        From: George Bloom <reworktech1@gmail.com>
        Sent: Wednesday, April 22, 2026 11:06 AM
        To: Christie Albone <christie@wirefab.com>
        Cc: Info @ Turnpack <info@turnpack.com>
        Subject: Re: Sleeves to quote

         

        It's 0.032" thick 

         

        On Wed, Apr 22, 2026, 11:05 AM Christie Albone <christie@wirefab.com> wrote:

        Hi George,

         

        Thank you for sending this over. It was a pleasure speaking with you yesterday.

         

        Can you please confirm the material gauge? I do not see it specified on the drawing.

         

        Best,

        Christie

         

        Christie Albone | Wirefab Inc.

        Director of Sales & Marketing

        T: (508) 754-5359 x 105

         

        From: George Bloom <reworktech1@gmail.com>
        Sent: Tuesday, April 21, 2026 2:45 PM
        To: Info <Info@wirefab.com>
        Cc: Info @ Turnpack <info@turnpack.com>
        Subject: Sleeves to quote

         

        Hi Christie with an ie,

         

        Here is the print for the part we just spoke about. We'd be looking for you to roll and tig weld them.

        Can you quote 10, 20 and 50 pieces?

         

        The principal company is Turnpack in Queen Creek, AZ

        The contact there is Lorena. So, can you send her the quote and copy me on it?

         

        Thanks,

        George Bloom

        Rework Tech

        781-640-7886



        Links contained in this email have been replaced. If you click on a link in the email above, the link will be analyzed for known threats. If a known threat is found, you will not be able to proceed to the destination. If suspicious content is detected, you will see a warning.

        von "Christie Albone" <christie@wirefab.com> - 03:41 - 22 Apr. 2026