Info Inbox

Hi Jeff,

Thanks for getting the samples ready to head to Chris!

As far as preliminary design, we generally can only really provide those after PO placement. 

I think the concept will be similar to what we provided Matteo.

Keith

Hi Chris,

Sounds good. I like the option for magnets or bolts if needed.

Good point about the ID axis. On the current systems there are two indexes because of the length of boats. We have a single index at the main but I know it has always been close.

I will work on getting some parts to sent out to you. I might have some older PParts that aren’t used for production that can be sent, otherwise we would need a quick turnaround on the PParts but the boats and other parts could be held on for longer. I’ll try to get those out next week.

If you have some preliminary designs to show I’d be interested in jumping on another quick call just to see them or if it would help clear up any other issues.

Thanks and hope you have a great weekend!

Jeff Galli
Sr. Process Development Engineer

TELEDYNE FLIR OEM

Upcoming out of office: June 18-22, July 1-8

Teledyne Confidential; Commercially Sensitive Business Data

Hi Chris,

 

Sounds good. I like the option for magnets or bolts if needed.

 

Good point about the ID axis. On the current systems there are two indexes because of the length of boats. We have a single index at the main but I know it has always been close.

 

I will work on getting some parts to sent out to you. I might have some older PParts that aren’t used for production that can be sent, otherwise we would need a quick turnaround on the PParts but the boats and other parts could be held on for longer. I’ll try to get those out next week.

 

If you have some preliminary designs to show I’d be interested in jumping on another quick call just to see them or if it would help clear up any other issues.

 

Thanks and hope you have a great weekend!

 

Jeff Galli
Sr. Process Development Engineer

 

TELEDYNE FLIR OEM

Upcoming out of office: June 18-22, July 1-8

 

 

Teledyne Confidential; Commercially Sensitive Business Data

 

From: Info at Turnpack <info@turnpack.com>
Sent: Thursday, June 4, 2026 4:24 PM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Cc: Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote

 

External Email

Hi Jeff,

 

Yes, the plan is to use magnets for the top plates instead of bolts. If you want we can use both magnets and bolts, leaving you the option of whether to use the bolts. The 3 boat designs you provided (Boson, BS8X and Tura) should all operate within the envelope of the machine. One item we flagged is that the center to center distance from the first to the last pocket is just under 12" of travel. Depending on the machine configuration with an ID axis the main axis travel can be limited to 10". Can you confirm that there are no existing travel issues with the boat designs you have provided?

 

What would be very helpful is to have a physical sample of each boat and part, along with the design files. Ideally, you could send us one p-part set for 1-day so we can review the existing design and prevent surprises.

 

 If it makes sense we could jump on another 30min call to confirm a few things and walk through the models you provided.

 

Chris

 

On Tue, Jun 2, 2026 at 10:59 AM Galli, Jeff (US) <Jeff.Galli@teledyne.com> wrote:

Hi Keith and Chris,

 

For the PParts is it possible to have them in/out with magnets and not have to move the track once the base is set? Were you able to stop the boats in the correct position even with the change in the part and boat sizes? For the boson part we have 2 different board sizes (boats are the same), do you need to take a look at that board as well or we can copy the interface of the PPart we are using now?

 

If that all looks good I will probably go ahead and order. I’m thinking what we will need is:

1x ID Base

4x Main Base

4x Main insert – Boson

2x Main insert – Tura

2x Main insert - BosonHD

1x ID insert - BosonHD

 

Thanks,

 

Jeff Galli
Sr. Process Development Engineer

 

TELEDYNE FLIR OEM

Upcoming out of office: June 18-22, July 1-8

 

 

Teledyne Confidential; Commercially Sensitive Business Data

 

From: Keith Chalman <keith@cti-rep.com>
Sent: Monday, June 1, 2026 3:40 PM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote

 

External Email

Hi Jeff,

 

Just checking to see if you have any questions on that quote Chris sent?  Attached again here.

 

Let us know.

 

Best Regards,

 

Keith Chalman

President - Chalman Technologies

   e keith@cti-rep.com

   c (714) 412-5411

    a 3150 E. La Palma Ave. Suite K, Anaheim, CA 92806

Manufacturer's Representative for:

(entire principal list at www.cti-rep.com)

 

 

 

From: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Sent: Tuesday, May 26, 2026 6:52 PM
To: Turnpack, LLC SO26201063 <catchall@turnpack.com>; Keith Chalman <keith@cti-rep.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote

 

Hi Chris and Keith,

 

Thanks for the quote. I will review it and organize my thoughts a bit and let you know if I have any questions by the end of the week.

 

Hope you enjoyed your long weekend!

 

Jeff Galli
Sr. Process Development Engineer

 

TELEDYNE FLIR OEM

Upcoming out of office: May 14-18

 

 

Teledyne Confidential; Commercially Sensitive Business Data

 

From: Chris Berger <info@turnpack.com>
Sent: Tuesday, May 26, 2026 7:23 AM
To: Jeff Galli <jeff.galli@teledyneflir.com>
Subject: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote

 

External Email

Hi Jeff, Attached is the quote for the split p-part bonding inserts for the 3 products for 1 machine. Let me know if you have any questions. If [...] ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​

Sign & Pay Quotation    SO26201063 $ 21,150.00 Expires on 06/21/2026

Hi Jeff,

 

Attached is the quote for the split p-part bonding inserts for the 3 products for 1 machine. Let me know if you have any questions.

 

If you intend to move forward it would be best if you could send us boats and possibly some parts as well just to make sure clearance is not going to be an issue.

 

Chris

Christopher Berger

Phone: +1 (480) 331-1878

Cell: +1 (480) 273-4686

cberger@turnpack.com | www.turnpack.com

 

---

Turnpack, LLC

+1 480-331-1878 | info@turnpack.com | https://www.turnpack.com

Turnpack — Efficiency Redefined Through Automation