Archives
Info Inbox
info@turnpack.com
-
RE: Turnpack, LLC Order (Ref PO26281835) Liness 1,2 7,8 and 9
Note: we are not sure on the expedite fees and how much the parts will weigh so it could be 3 times, based on ship weight (10kg limit)
A few the lines will require expedite.
Hope that makes sense.
STEVE SHIFLETT | Business Development Manager
P: 602.550.5519
Heitek Automation • a SunSource Company
From: Tracy Love <tlove@heitek.com>
Sent: Thursday, July 16, 2026 3:23 PM
To: Turnpack, LLC PO26281835 <catchall@turnpack.com>
Cc: Steve Shiflett <sshiflett@heitek.com>
Subject: RE: Turnpack, LLC Order (Ref PO26281835)Good afternoon, Lorena,
Thank you for your recent order! We are pleased to inform you that your order acknowledgment is attached. Please find the confirmed details of your order below.
- PO Number: PO26281835
- Delivery Method: UPS ORANGE
- Shipping: Orders are subject to freight charges which will be calculated at the time of invoice.
- Special Notes:
Please note that delivery dates might change due to inventory fluctuations at the factory level. You can review our return policy here https://www.heitek.com/returnpolicy.
We appreciate your business and are committed to ensuring your complete satisfaction. If you have any questions or need further assistance, please do not hesitate to reach out.
Thank you for choosing Heitek Automation.
Thank you,
TRACY LOVE | Customer Care
P: 602.730.8516
Heitek Automation • a SunSource Company
www.heitek.com • Request a Quote
From: Lorena Carrillo <info@turnpack.com>
Sent: Tuesday, July 14, 2026 3:51 PM
To: Heitek Sales <sales@heitek.com>
Subject: Turnpack, LLC Order (Ref PO26281835)You don't often get email from info@turnpack.com. Learn why this is important
Dear Customer Care (Heitek Automation) Please find attached purchase order PO26281835 amounting in $ 12,718.00 from Turnpack, LLC as well as the [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏
PO26281835
$ 12,718.00 due 7/14/26
Dear Customer Care (Heitek Automation)
Please find attached purchase order PO26281835 amounting in $ 12,718.00 from Turnpack, LLC as well as the resale certificate, for your review and action.
The receipt is expected for 07/20/2026, if this date is not achievable, please reply with an available date for reconsideration.
**Please acknowledge the receipt of this order and lead time.Turnpack — Efficiency Redefined Through Automation
by STEVE SHIFLETT - 06:26 - 16 Jul 2026 -
RE: Turnpack, LLC Order (Ref PO26281835)
Good afternoon, Lorena,
Thank you for your recent order! We are pleased to inform you that your order acknowledgment is attached. Please find the confirmed details of your order below.
- PO Number: PO26281835
- Delivery Method: UPS ORANGE
- Shipping: Orders are subject to freight charges which will be calculated at the time of invoice.
- Special Notes:
Please note that delivery dates might change due to inventory fluctuations at the factory level. You can review our return policy here https://www.heitek.com/returnpolicy.
We appreciate your business and are committed to ensuring your complete satisfaction. If you have any questions or need further assistance, please do not hesitate to reach out.
Thank you for choosing Heitek Automation.
Thank you,
TRACY LOVE | Customer Care
P: 602.730.8516
Heitek Automation • a SunSource Company
www.heitek.com • Request a Quote
From: Lorena Carrillo <info@turnpack.com>
Sent: Tuesday, July 14, 2026 3:51 PM
To: Heitek Sales <sales@heitek.com>
Subject: Turnpack, LLC Order (Ref PO26281835)You don't often get email from info@turnpack.com. Learn why this is important
Dear Customer Care (Heitek Automation) Please find attached purchase order PO26281835 amounting in $ 12,718.00 from Turnpack, LLC as well as the [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏
PO26281835
$ 12,718.00 due 7/14/26
Dear Customer Care (Heitek Automation)
Please find attached purchase order PO26281835 amounting in $ 12,718.00 from Turnpack, LLC as well as the resale certificate, for your review and action.
The receipt is expected for 07/20/2026, if this date is not achievable, please reply with an available date for reconsideration.
**Please acknowledge the receipt of this order and lead time.Turnpack — Efficiency Redefined Through Automation
by TRACY LOVE - 06:26 - 16 Jul 2026 -
(4937562:NO00) TURNKEY PACKAGING SOLUTIONS LLC Past Due Statement & Invoice Copies
Date: 07/16/2026
Account Number: 0004937562
TURNKEY PACKAGING SOLUTIONS LLC
22425 S SCOTLAND CT, STE 104
QUEEN CREEK, AZ
85142-1056Dear Valued Airgas Customer,
Please see the past due statement shown below and the attached invoice copies. Kindly review these items and respond with a payment status to bring your account current. If there is a dispute preventing timely payment, please contact me to resolve this.
Invoice # DL = Late Fee Invoice Date Due Date Days in Arrear PO# Ship to Account Number Amount Due 5525463403 RR
06/30/2026
06/30/2026 16 RENT 0004939036 105.60 105.60
Sincerely,
Attija Doughty
Airgas, an Air Liquide company
Credit & Collections
Phone: 216-
Email: attija.doughty@airgas.com
www.airgas.com
by "attija.doughty@airgas.com" <attija.doughty@airgas.com> - 02:26 - 16 Jul 2026 -
Get Fast Food Style Fries in Minutes with Ore-Ida!
Get Fast Food Style Fries in Minutes with Ore-Ida!
Oreida 01
Oreida 02
Oreida 03
Oreida 04
Oreida 05
Savings Event, Shop All
Product specifications, availability and prices are subject to change without notice.
Savings Event: Instant Savings are valid only June 15 - July 19, 2026 at Costco Business Center and CostcoBusinessDelivery.com. A valid Costco membership is required. State law may require sales tax to be charged on the pre-discounted price if the product is subject to sales tax. These taxes, if any, are in addition to the amount you are paying for the product. Quantities are limited. Item limits apply, per member. Instant Savings limited to inventory available from manufacturer. No rain checks will be issued for out of stock items. All Instant Savings are available for delivery unless indicated. Delivery orders must be placed online at CostcoBusinessDelivery.com or SameDay.CostcoBusinessDelivery.com to receive Instant Savings. Savings are not available on Costco.com and may not be combined with any other Instant Savings or coupon. Cigarette items are for resale only. No cash redemption.
In the past you provided Costco with your email address info@turnpack.com. Occasionally, you will receive brief advertising announcements regarding special items and services. If you prefer not to receive these advertisements, please click unsubscribe to send an email requesting to be removed.
To contact us, please click here.
Costco Wholesale, Customer Service | P.O. Box 34535 -- Seattle, WA 98124-1535.
© 1998-2026 Costco Wholesale Corporation. All rights reserved.
Member Privileges and Conditions|Privacy Statement|Terms and Conditions
by "Costco Business Center" <Costco@digital.costco.com> - 01:12 - 16 Jul 2026 -
Chris, please review your moving quote
Hi Chris,
Thank you for considering us to take care of your move.
Press the link below to view your online quote:
Press to view
If anything looks incorrect or if you have further questions, please let me know ASAP via phone or email.
Kathryn
A to Z Valleywide Movers / Leo's Moving
(602) 830-4442
by "A to Z Valleywide Movers via Supermove" <noreply@supermove.co> - 12:32 - 16 Jul 2026 -
Earn $300 cash back to reinvest in your business
Earn $300 cash back to reinvest in your business
Intuit Business Credit Card
Get $300 just for doing business
You’re prequalified1 for an Intuit Business Credit Card. Spend $3,000 in the first 3 months and get a $300 bonus.2
Apply by 09/14/2026.Learn more No impact to your personal credit score
5%
cash back
on Intuit products and services2
2%
cash back
on everyday purchases2
No annual fee3
Keep more of what you earn every year.
Apply now This message was sent to info@turnpack.com, as an Intuit customer, consistent with your email preferences. If you have chosen not to receive marketing messages, you will continue to receive business communications about your selected Intuit product(s), which may either affect your service or software, your account, or which may be legally required. Unsubscribe | Security | Privacy statement © 2026 Intuit Inc., Trademarks.
2800 E. Commerce Center Place, Tucson, AZ 85706
by "Intuit QuickBooks" <intuit@eq.intuit.com> - 11:13 - 16 Jul 2026 -
Order #WN64786413 is Out for Delivery Today, Chris!
The Home Depot
Order #: WN64786413 Order Date: Jul 13, 2026 Get ready, Chris! Your package is out for delivery today. Your delivery is on track to arrive Thursday, Jul. 16. Your package will be delivered by our shipping partner, FedEx Ground.
We don't expect any delays but arrival times depend on weather, traffic and road conditions.Be prepared for delivery day. - Check with the carrier if you have preferences for receiving your package.
- We'll send an alert when your package is dropped off.
All Delivery Prep FAQs Track Delivery Manage my order Order Details Deliver to Chris Berger: 6922 E Via Northgate, Ste 101
Mesa, AZ 85212Job / PO Number #Office Relocation Delivery 
Jul 16 ETA by FedEx Ground Thu, Jul 16 Tracking ID: 521364432074 
Carlon 2 in. 90 Schedule 40 Electrical PVC 36 in. Bend Radius Belled End Elbow (UA9FJB) SKU #753785 Qty: 6 Get Help with Your Order 
Text 'Support' to 38698
Available 24/7
Call Support
800-430-3376
Easy In-Store and Online Returns
Read Return PolicyVisit our Contact Us page to explore help topics and find more ways to connect. 
YOU MIGHT ALSO LIKE 
Please do not reply to this automated message. 
Privacy & Security Return Policy Customer Service © 2026 The Home Depot Product Authority, LLC. All right reserved.
2455 Paces Ferry Rd SE, Atlanta, GA 30339Local prices may vary from those displayed. All offers may not be available in all areas.
by "The Home Depot" <HomeDepot@order.homedepot.com> - 11:13 - 16 Jul 2026 -
White Paper Takes on Food and Beverage Application Challenges for Bearings
IKO White Paper Takes on Food and Beverage Application Challenges for Bearings
A new IKO white paper covers high-performance motion devices and how to safeguard them in food and beverage manufacturing environments. Topics will include an overview of typical applications requiring robust bearings as well as material considerations, protection strategies, customization options and factors to consider when evaluating bearing vendors for food manufacturing applications. With motion components engineered for the job, you have the recipe for optimal production and long life from your food and beverage equipment.Online Rotary Motion Configurator Streamlines Bearing Selection
IKO's Bearing Configurator Tool guides you through filter criteria such as bearing type, structure, material, load ratings and sizing information including dimensions, bore size, and inner and outer diameters. Based on your choices, the tool will generate a list of IKO parts that meet your criteria along with links to each part’s technical details.
With our Bearing Configurator Tool, you’ll determine the best-performing rotary bearing for your application without the time and complexity that product selection typically entails.
by "IKO International, Inc." <eco@ikonet.co.jp> - 11:06 - 16 Jul 2026 -
RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?
Hi Chris
Correct on PO26211760 (7/23 ship date+transit)
Now confirming ship date for PO26261823.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, July 16, 2026 7:25 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Info at Turnpack <info@turnpack.com>; Jayna Hanselman <jaynah@msitec.com>; Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Chris,
Just to ensure we are all referencing the same order information:
- PO26211760: 300mm x 200mm x 100mm -> new ship date 07/23 + transit time?
- PO26261823: 600mm x 300mm x 150mm -> ship date 07/31 (using 4 week lead time estimate) + transit time?
Chris
On Thu, Jul 16, 2026 at 7:17 AM Chris Keller <chrisk@waisales.com> wrote:
All, we pinged Toyo for tracking information and have the following update this morning:
We're sorry to inform you that this shipment has been postponed to July 23 due to a shortage of the MAS-bracket and motor mount. Please rest assured we are closely following up and doing our best to have the goods ready for shipment as soon as possible.
We've let Toyo know we'd prefer to be informed upfront on delivery delays moving forward.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Chris Keller
Sent: Wednesday, July 15, 2026 8:30 AM
To: Info at Turnpack <info@turnpack.com>; Jayna Hanselman <jaynah@msitec.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Christopher Berger <cberger@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Hi Jayna
Did you receive tracking info from Toyo yet?
I just pinged Cindy and Eric at factory to send over in case you have not seen it yet.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Info at Turnpack <info@turnpack.com>
Sent: Tuesday, July 14, 2026 5:32 PM
To: Jayna Hanselman <jaynah@msitec.com>
Cc: Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Christopher Berger <cberger@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?You don't often get email from info@turnpack.com. Learn why this is important
Hello team, any update on this order?
Respectfully,
Lorena CarrilloOn Mon, Jul 6, 2026, 9:54 AM Jayna Hanselman <jaynah@msitec.com> wrote:
Thank you, Chris!
Jayna Hanselman| Account Coordinator
MSI TEC
p: 602-426-1333
w: msitec.com
From: Chris Keller <chrisk@waisales.com>
Sent: Monday, July 6, 2026 9:30 AM
To: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>; Jayna Hanselman <jaynah@msitec.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Hey guys
Hope everyone had a nice holiday weekend.
The ship date from production team was then confirmed July 16, but we have asked them to expedite the order, and they are now targeting shipment on July 10.
We will keep you posted if there any changes. Thanks.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Thursday, July 2, 2026 12:29 PM
To: 'Mario Garcia' <mario.garcia@msitec.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Hello Team please see updated ship date for these parts.
Thank you for your time,
Lorena Carrillo
From: Mario Garcia <mario.garcia@msitec.com>
Sent: Monday, June 29, 2026 6:14 PM
To: Christopher Berger <cberger@turnpack.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Chris,
These are meant to work with the 60mm frame Omron motor below; image received by Brandon last week
Omron Motor [Shaft Diameter = 11mm]:
From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, June 29, 2026 4:11 PM
To: Mario Garcia <mario.garcia@msitec.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Thanks Mario. These will also work with the Omron motors, correct?
@Lorena Carrillo If Mario confirms please proceed and place the order. I will create the project to assign this to.
Chris
On Mon, Jun 29, 2026 at 4:07 PM Mario Garcia <mario.garcia@msitec.com> wrote:
Brandon,
You can proceed with same pricing as before. After we get a Purchase order, TOYO will generate drawings for you to approve. Shipping after receipt of order is about 4 weeks.
X: GLTH12-L12-600-BL-Y40-C4P2
Price: $1,970 each + 10% Tariff
Y: GLTH8-L12-300-BL-Y20-C4P2
Price: $1,167 each+ 10% Tariff
Z: GLTH5-L6-150-BC-Y10B-C4P2
Price: $970 each + 10% Tariff
Estimated Shipping for QTY(1) each above is ~$250 total
4 week Lead Time
MARIO GARCIA | FIELD AUTOMATION ENGINEER
MSITEC
p: 602.426.1333 | c: 480.299.4701
w: msitec.com
From: Brandon Benavidez <bbenavidez@turnpack.com>
Sent: Tuesday, June 23, 2026 8:32 AM
To: Chris Keller <chrisk@waisales.com>; Mario Garcia <mario.garcia@msitec.com>
Cc: Christopher Berger <cberger@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Chris/Mario,
Yesterday, we were able to look more closely at the 24" x 36" [FactoryRobot] machine and found one small change we'd like to make. When you get a chance, please update the quote to include the following changes (including those needed for the appropriate motor mounting). Since this is just for the actuators, can you ensure they will work with our current Omron motors? The CAD I currently have for the actuators lacks the appropriate mounting. I've included the Omron motor drawing below for reference.
Actuator Part Numbers:
X: GLTH12-L12-600-BL-Y40-C4P2
Y: GLTH8-L12-300-BL-Y20-C4P2_0 [Previously was: GLTH8-L12-300-BR-Y20-C4P2_0]
Z: GLTH5-L6-150-BC-Y10B-C4P2_0
Omron Motor [Shaft Diameter = 11mm]:
Please let us know if you need anything additional. Thank you
Best regards,
Brandon Benavidez - Mechanical Engineer
Turnpack, LLC
Phone #: 1 (480) 276-2897
On Mon, Jun 22, 2026 at 6:53 AM Chris Keller <chrisk@waisales.com> wrote:
Hello all
The estimated ship date from Toyo for the ordered actuators for 19”x20” FactoryLab is 7/11.
@Mario Garcia – Cindy at Toyo will have tracking on/by July 11th.
@Christopher Berger/@Lorena Carrillo – did you place the PO for the actuators for 24”x36” FactoryRobot with MSI on Friday?
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Chris Keller
Sent: Friday, June 19, 2026 11:00 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesGood to hear on the 24” x 36”.
Totally understand the time constraint issue.
Checking on that PO placed on 6/10 and will provide delivery update by Monday.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, June 18, 2026 9:40 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesThe 24" x 36" will be finalized tomorrow. For the last two weeks we had 0 availability to work on this project and I had hoped to get the orders in before.
Can you confirm that order PO26211760, placed on 06/10 for the 21" x 19" is being processed and still expected to arrive on 07/08?
Chris
On Wed, Jun 17, 2026 at 9:13 AM Chris Keller <chrisk@waisales.com> wrote:
Thanks for the reply and update Lorena.
@'Christopher Berger' is the one to approve.
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Tuesday, June 16, 2026 6:12 PM
To: Chris Keller <chrisk@waisales.com>; 'Christopher Berger' <cberger@turnpack.com>; 'Mario Garcia' <mario.garcia@msitec.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesHi no I have not placed the PO yet. Please confirm final approval.
Thank you for your time,
Lorena Carrillo
From: Chris Keller <chrisk@waisales.com>
Sent: Tuesday, June 16, 2026 7:25 AM
To: Christopher Berger <cberger@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesGood morning Chris and team,
Have you placed the below order with Mario/MSI TEC?
With this, we should have the two XYZ systems (19x20” and 24x36” — Factory Lab and Factory Robot) covered.
I’ll check on delivery dates with Toyo today.
The remaining item is the FactoryCube XXYY. I’ll send a separate note on that shortly.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, June 10, 2026 9:28 AM
To: Mario Garcia <mario.garcia@msitec.com>
Cc: Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesMario,
we'll place the order for these stages by tomorrow:
X: GLTH12-L12-600-BL-Y40-C4P2
Price: $1,970 each + 10% Tariff
Y: GLTH8-L12-300-BR-Y20-C4P2
Price: $1,167 each+ 10% Tariff
Z: GLTH5-L6-150-BC-Y10B-C4P2
Price: $970 each + 10% Tariff
Estimated Shipping for QTY(1) each above is ~$250 total
4 week Lead Time
Chris
On Mon, Jun 8, 2026 at 4:00 PM Mario Garcia <mario.garcia@msitec.com> wrote:
Chris,
Pricing below for Actuators Only. I do also provide a ball park price on a MultiAxisSystem version. If its within budget, we can send you a formal quote and 3D file for the MultiAxis System; we need commitment from the customer of an upcoming purchase as this take some engineering time to prepare.
X: GLTH12-L12-600-BL-Y40-C4P2
Price: $1,970 each + 10% Tariff
Y: GLTH8-L12-300-BR-Y20-C4P2
Price: $1,167 each+ 10% Tariff
Z: GLTH5-L6-150-BC-Y10B-C4P2
Price: $970 each + 10% Tariff
Estimated Shipping for QTY(1) each above is ~$250 total
4 week Lead Time
Multi Axis System Price ~$5,300 + 10% Tariff + $500 Shipping 5 to 6 weeks Lead Time.
Catalog Download Ball Screw Linear Actuator - GLTH Series
MARIO GARCIA | FIELD AUTOMATION ENGINEER
MSITEC
p: 602.426.1333 | c: 480.299.4701
w: msitec.com
From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, June 8, 2026 7:21 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesChris,
for the 36"x24" Cantilever gantry the way I see this is:
X: GLTH12-L12-600-BL-Y40-C4P2Y: GLTH8-L12-300-BR-Y20-C4P2
Z: GLTH5-L6-150-BC-Y10B-C4P2
I picked Yaskawa motors but for the time being, I guess we'll buy without motors and single stages. I didn't see on the website where it would show me the specs for these stages. Can you send them to me?
Chris
On Fri, Jun 5, 2026 at 10:08 AM Chris Keller <chrisk@waisales.com> wrote:
Sounds good, please let us know if anything is unclear, we know you need this quickly, you mentioned this one is more urgent than the 19X20” Factory Lab…
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, June 4, 2026 10:59 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesChris,
We are looking at the CAD today and hopefully will have an answer EOD. We must attach the motors to these part numbers to determine the full length before making a decision.
Chris
On Thu, Jun 4, 2026 at 7:50 AM Chris Keller <chrisk@waisales.com> wrote:
Hi Chris
Please verify the open bullets today so we can complete the part number and issue correct quote
We have pricing ready and can send as soon as you confirm.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: doug@toyorobot.com <doug@toyorobot.com>
Sent: Wednesday, June 3, 2026 5:02 PM
To: Sacha Marcroft <sacham@waisales.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Mario Garcia' <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; 'Brandon Benavidez' <bbenavidez@turnpack.com>; 'Lorena Carrillo' <lcarrillo@turnpack.com>; 'TOYO TA1' <ta1@toyorobot.com>; 'Eric Zeng' <ericzeng@toyorobotics.com>; 'Doug Kiernan' <doug@toyorobotics.com>
Subject: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesChris B,
As a follow up to our meeting today.
Here are options for a 24x36 envelope cantilvered system.
Standard actuator leadtime ~3-4 weeks
Create MAS Kit +1-2 weeks.
Catalog section attached.
You can download models here – https://toyo.partcommunity.com/
GLTH12-L?-600-B?-M40-E5
Pick lead, 6, 12, 24mm
600mm stroke = 873mm (34.3”) OAL
Confirm motor position, BL/BR/BM
Confirm motor mount
GLTH8-L?-300-B?-M40-E5
Pick lead, 6, 12, 24mm
300mm stroke = 592mm (23.3”) OAL
Confirm motor position, BL/BR/BM
Confirm motor mount
GLTH5-L?-150-B?-M40-E5
Pick lead, 2, 6, 12, 20mm
Confirm motor position, BL/BR/BM – do you need parallel mount or is in-line, BC okay?
Confirm motor mount
Do you want any limit or home sensors?
Regards,
Doug KiernanTOYO Automation
415.264.9787
*Please note my new email and update your CRM: doug@toyorobotics.com
New TOYO Robotics Americas website going live soon!
From: Sacha Marcroft <sacham@waisales.com>
Sent: Friday, May 22, 2026 11:15 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>; doug@toyorobot.com; TOYO TA1 <ta1@toyorobot.com>; Eric Zeng <ericzeng@toyorobotics.com>
Subject: RE: Place holder for todays call - second system with Motors and DrivesYeah sure we discussed potentially having a traveler on X so was looking at the clearance. With traveler we don’t need the GTH12 since we are splitting the load. The Gth8 Carriage is 160mm (sorry mentioned 120mm that was incorrect) and Z is roughly 55mm wide. We can add an undriven GTH5 traveler (very smooth) traveler or profile so there is no interfere with Y and Z axis on the traveler side.
Rough concept shows profile rail but we use our actuators as travelers as well.
Sacha Marcroft
VP Motion Division
Western Automation
714-473-4883
From: Christopher Berger <cberger@turnpack.com>
Sent: Friday, May 22, 2026 10:45 AM
To: Sacha Marcroft <sacham@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>; doug@toyorobot.com; TOYO TA1 <ta1@toyorobot.com>; Eric Zeng <ericzeng@toyorobotics.com>
Subject: Re: Place holder for todays call - second system with Motors and DrivesThanks Sacha. Looking at the model and your email you are proposing a T-style gantry which we would prefer for clearance reasons but can you briefly explain what you mean by this bullet point?
- GTH8 with motor wrap and 600mm travel is 35” long. Carriage is 120mm and the Width 80mm so traveler or X’ would fit nicely below.
Thanks
Chris
On Fri, May 22, 2026 at 9:19 AM Sacha Marcroft <sacham@waisales.com> wrote:
Hey Gents,
First pass at the larger T stage. T stage Spec’s below and potential solution stages reviewed. Let me know your initial thoughts then we will move to providing a MAS quote.
Attached is the XY potential using GTH12 on x and GTH8 on Y for the 36”x 24” plate.
- XYZ Ballscrew stages for 36" x 24" baseplate without motors (we have/can get Omron Servo Motors)
- XYZ Ballscrew stages for 36" x 24" baseplate with motors
- MAS Ballscrew system for 36" x 24" with Motors
- Option: Add Linear encoder
36” long axis:
- GTH12 with motor wrap and 600mm travel is 34.4” long
- GTH12 with motor wrap and 650mm travel is 36.35” long
- GTH8 with motor wrap and 600mm travel is 35” long. Carriage is 120mm and the Width 80mm so traveler or X’ would fit nicely below.
24” axis:
- GTH8 with motor wrap and 300mm travel is 23.26” long.
6” Z axis:
- GTH5 with motor wrap and 150mm travel is 14.25” long. With motor wrap we need to consider 60mm motor mount. I am sure they have made one but need to check. The stage is 52mm wide model shows a 100w motor
Sacha Marcroft
VP Motion Division
Western Automation
714-473-4883
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, May 21, 2026 3:49 PM
To: Sacha Marcroft <sacham@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Place holder for todays call - second system with Motors and DrivesJust to summarize this one more time:
- FactoryLab
- XYZ Ballscrew stages for 20" x 19" baseplate without motors (we have/can get Omron Servo Motors) -> We are ready to order
- XYZ Ballscrew stages for 20" x 19" baseplate with motors
- MAS Ballscrew system for 20" x 19" with Motors
- Option: Add Linear encoder
- FactoryCube
- XYZ Gantry Linear stages: 400mm dual Y, 500mm X, 150mm Z
- XYZ Gantry Ballscrew stages: 400mm dual Y, 500mm X, 150mm Z
- XXYY Wafer table: ballscrew 350mm min travel for 12" wafer -> We are ready to order
- Option: Add Linear Encoder to Ballscrew stages
- FactoryRobot:
- XYZ Ballscrew stages for 36" x 24" baseplate without motors (we have/can get Omron Servo Motors)
- XYZ Ballscrew stages for 36" x 24" baseplate with motors
- MAS Ballscrew system for 36" x 24" with Motors
- Option: Add Linear encoder
What we will place orders for depends on lead time and pricing but I am interested to get lead time and pricing for all listed items.
Chris
On Thu, May 21, 2026 at 1:28 PM Sacha Marcroft <sacham@waisales.com> wrote:
Let me know if this time slot fits and if not make recommendations for another slot.
Thanks,
________________________________________________________________________________
Microsoft Teams meeting
Meeting ID: 227 243 475 332 88
Passcode: 7dg33tp2
Dial in by phone
+1 469-998-7643,,99664092# United States, Dallas
Phone conference ID: 996 640 92#
For organizers: Meeting options | Reset dial-in PIN
________________________________________________________________________________
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
CONFIDENTIALITY NOTICE: This e-mail transmission and any documents, files or previous messages attached to it may contain confidential or legally privileged information. If you are not the intended recipient, you are hereby notified that you must not read this transmission and that any disclosure, copying, printing, distribution or use of any of the information contained in or attached to this transmission is strictly prohibited. If you received this transmission in error, please immediately notify the sender by telephone or return e-mail and delete the original transmission and its attachments without reading or saving in any manner.
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
by "Chris Keller" <chrisk@waisales.com> - 10:47 - 16 Jul 2026 -
Your Daily Digest for Thu, 7/16 is ready to view
Informed Delivery
COMING TO YOU SOON
Hi, Chris!
You have 1 mailpiece(s) and 0 inbound package(s) arriving soon.
Thursday
16 July20261
Mailpiece(s)
0
Package(s)
PACKAGES
View Dashboard No packages are available to display. 
You may have more mail or packages than are shown in your Daily Digest. To check, go to your Dashboard.
Mail may arrive after you receive the notification. Please allow several days for delivery before reporting missing mail. Sign in to your consumer dashboard to report missing mail within 7 days of receiving this Daily Digest email.
*These images represent mail pieces that are sorted on USPS® automated equipment. Some of your mail may not be shown here.
You subscribed to this service with USPS® Product Technology Innovation, 475 L`Enfant Plaza SW, Washington, DC 20260.
If you no longer wish to receive daily email notifications, unsubscribe here.
If you need support, please visit user support for Informed Delivery®.
For more information about this service, please visit general information about Informed Delivery.
Copyright © 2026 United States Postal Service®. All Rights Reserved. The Eagle Logo and the trade dress of USPS® Packaging are among the many trademarks of the U.S. Postal Service®.
This is an automated email, please do not reply to this message. This message is for the designated recipient only and may contain privileged, proprietary, or otherwise private information. If you have received it in error, please delete. Any other use of the email by you is prohibited.
by "USPS Informed Delivery" <USPSInformeddelivery@email.informeddelivery.usps.com> - 10:37 - 16 Jul 2026 -
Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?
Chris,Just to ensure we are all referencing the same order information:- PO26211760: 300mm x 200mm x 100mm -> new ship date 07/23 + transit time?
- PO26261823: 600mm x 300mm x 150mm -> ship date 07/31 (using 4 week lead time estimate) + transit time?
ChrisOn Thu, Jul 16, 2026 at 7:17 AM Chris Keller <chrisk@waisales.com> wrote:All, we pinged Toyo for tracking information and have the following update this morning:
We're sorry to inform you that this shipment has been postponed to July 23 due to a shortage of the MAS-bracket and motor mount. Please rest assured we are closely following up and doing our best to have the goods ready for shipment as soon as possible.
We've let Toyo know we'd prefer to be informed upfront on delivery delays moving forward.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Chris Keller
Sent: Wednesday, July 15, 2026 8:30 AM
To: Info at Turnpack <info@turnpack.com>; Jayna Hanselman <jaynah@msitec.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Christopher Berger <cberger@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Hi Jayna
Did you receive tracking info from Toyo yet?
I just pinged Cindy and Eric at factory to send over in case you have not seen it yet.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Info at Turnpack <info@turnpack.com>
Sent: Tuesday, July 14, 2026 5:32 PM
To: Jayna Hanselman <jaynah@msitec.com>
Cc: Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Christopher Berger <cberger@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?You don't often get email from info@turnpack.com. Learn why this is important
Hello team, any update on this order?
Respectfully,
Lorena CarrilloOn Mon, Jul 6, 2026, 9:54 AM Jayna Hanselman <jaynah@msitec.com> wrote:
Thank you, Chris!
Jayna Hanselman| Account Coordinator
MSI TEC
p: 602-426-1333
w: msitec.com
From: Chris Keller <chrisk@waisales.com>
Sent: Monday, July 6, 2026 9:30 AM
To: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>; Jayna Hanselman <jaynah@msitec.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Hey guys
Hope everyone had a nice holiday weekend.
The ship date from production team was then confirmed July 16, but we have asked them to expedite the order, and they are now targeting shipment on July 10.
We will keep you posted if there any changes. Thanks.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Thursday, July 2, 2026 12:29 PM
To: 'Mario Garcia' <mario.garcia@msitec.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Hello Team please see updated ship date for these parts.
Thank you for your time,
Lorena Carrillo
From: Mario Garcia <mario.garcia@msitec.com>
Sent: Monday, June 29, 2026 6:14 PM
To: Christopher Berger <cberger@turnpack.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Chris,
These are meant to work with the 60mm frame Omron motor below; image received by Brandon last week
Omron Motor [Shaft Diameter = 11mm]:
From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, June 29, 2026 4:11 PM
To: Mario Garcia <mario.garcia@msitec.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Thanks Mario. These will also work with the Omron motors, correct?
@Lorena Carrillo If Mario confirms please proceed and place the order. I will create the project to assign this to.
Chris
On Mon, Jun 29, 2026 at 4:07 PM Mario Garcia <mario.garcia@msitec.com> wrote:
Brandon,
You can proceed with same pricing as before. After we get a Purchase order, TOYO will generate drawings for you to approve. Shipping after receipt of order is about 4 weeks.
X: GLTH12-L12-600-BL-Y40-C4P2
Price: $1,970 each + 10% Tariff
Y: GLTH8-L12-300-BL-Y20-C4P2
Price: $1,167 each+ 10% Tariff
Z: GLTH5-L6-150-BC-Y10B-C4P2
Price: $970 each + 10% Tariff
Estimated Shipping for QTY(1) each above is ~$250 total
4 week Lead Time
MARIO GARCIA | FIELD AUTOMATION ENGINEER
MSITEC
p: 602.426.1333 | c: 480.299.4701
w: msitec.com
From: Brandon Benavidez <bbenavidez@turnpack.com>
Sent: Tuesday, June 23, 2026 8:32 AM
To: Chris Keller <chrisk@waisales.com>; Mario Garcia <mario.garcia@msitec.com>
Cc: Christopher Berger <cberger@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Chris/Mario,
Yesterday, we were able to look more closely at the 24" x 36" [FactoryRobot] machine and found one small change we'd like to make. When you get a chance, please update the quote to include the following changes (including those needed for the appropriate motor mounting). Since this is just for the actuators, can you ensure they will work with our current Omron motors? The CAD I currently have for the actuators lacks the appropriate mounting. I've included the Omron motor drawing below for reference.
Actuator Part Numbers:
X: GLTH12-L12-600-BL-Y40-C4P2
Y: GLTH8-L12-300-BL-Y20-C4P2_0 [Previously was: GLTH8-L12-300-BR-Y20-C4P2_0]
Z: GLTH5-L6-150-BC-Y10B-C4P2_0
Omron Motor [Shaft Diameter = 11mm]:
Please let us know if you need anything additional. Thank you
Best regards,
Brandon Benavidez - Mechanical Engineer
Turnpack, LLC
Phone #: 1 (480) 276-2897
On Mon, Jun 22, 2026 at 6:53 AM Chris Keller <chrisk@waisales.com> wrote:
Hello all
The estimated ship date from Toyo for the ordered actuators for 19”x20” FactoryLab is 7/11.
@Mario Garcia – Cindy at Toyo will have tracking on/by July 11th.
@Christopher Berger/@Lorena Carrillo – did you place the PO for the actuators for 24”x36” FactoryRobot with MSI on Friday?
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Chris Keller
Sent: Friday, June 19, 2026 11:00 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesGood to hear on the 24” x 36”.
Totally understand the time constraint issue.
Checking on that PO placed on 6/10 and will provide delivery update by Monday.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, June 18, 2026 9:40 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesThe 24" x 36" will be finalized tomorrow. For the last two weeks we had 0 availability to work on this project and I had hoped to get the orders in before.
Can you confirm that order PO26211760, placed on 06/10 for the 21" x 19" is being processed and still expected to arrive on 07/08?
Chris
On Wed, Jun 17, 2026 at 9:13 AM Chris Keller <chrisk@waisales.com> wrote:
Thanks for the reply and update Lorena.
@'Christopher Berger' is the one to approve.
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Tuesday, June 16, 2026 6:12 PM
To: Chris Keller <chrisk@waisales.com>; 'Christopher Berger' <cberger@turnpack.com>; 'Mario Garcia' <mario.garcia@msitec.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesHi no I have not placed the PO yet. Please confirm final approval.
Thank you for your time,
Lorena Carrillo
From: Chris Keller <chrisk@waisales.com>
Sent: Tuesday, June 16, 2026 7:25 AM
To: Christopher Berger <cberger@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesGood morning Chris and team,
Have you placed the below order with Mario/MSI TEC?
With this, we should have the two XYZ systems (19x20” and 24x36” — Factory Lab and Factory Robot) covered.
I’ll check on delivery dates with Toyo today.
The remaining item is the FactoryCube XXYY. I’ll send a separate note on that shortly.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, June 10, 2026 9:28 AM
To: Mario Garcia <mario.garcia@msitec.com>
Cc: Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesMario,
we'll place the order for these stages by tomorrow:
X: GLTH12-L12-600-BL-Y40-C4P2
Price: $1,970 each + 10% Tariff
Y: GLTH8-L12-300-BR-Y20-C4P2
Price: $1,167 each+ 10% Tariff
Z: GLTH5-L6-150-BC-Y10B-C4P2
Price: $970 each + 10% Tariff
Estimated Shipping for QTY(1) each above is ~$250 total
4 week Lead Time
Chris
On Mon, Jun 8, 2026 at 4:00 PM Mario Garcia <mario.garcia@msitec.com> wrote:
Chris,
Pricing below for Actuators Only. I do also provide a ball park price on a MultiAxisSystem version. If its within budget, we can send you a formal quote and 3D file for the MultiAxis System; we need commitment from the customer of an upcoming purchase as this take some engineering time to prepare.
X: GLTH12-L12-600-BL-Y40-C4P2
Price: $1,970 each + 10% Tariff
Y: GLTH8-L12-300-BR-Y20-C4P2
Price: $1,167 each+ 10% Tariff
Z: GLTH5-L6-150-BC-Y10B-C4P2
Price: $970 each + 10% Tariff
Estimated Shipping for QTY(1) each above is ~$250 total
4 week Lead Time
Multi Axis System Price ~$5,300 + 10% Tariff + $500 Shipping 5 to 6 weeks Lead Time.
Catalog Download Ball Screw Linear Actuator - GLTH Series
MARIO GARCIA | FIELD AUTOMATION ENGINEER
MSITEC
p: 602.426.1333 | c: 480.299.4701
w: msitec.com
From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, June 8, 2026 7:21 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesChris,
for the 36"x24" Cantilever gantry the way I see this is:
X: GLTH12-L12-600-BL-Y40-C4P2Y: GLTH8-L12-300-BR-Y20-C4P2
Z: GLTH5-L6-150-BC-Y10B-C4P2
I picked Yaskawa motors but for the time being, I guess we'll buy without motors and single stages. I didn't see on the website where it would show me the specs for these stages. Can you send them to me?
Chris
On Fri, Jun 5, 2026 at 10:08 AM Chris Keller <chrisk@waisales.com> wrote:
Sounds good, please let us know if anything is unclear, we know you need this quickly, you mentioned this one is more urgent than the 19X20” Factory Lab…
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, June 4, 2026 10:59 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesChris,
We are looking at the CAD today and hopefully will have an answer EOD. We must attach the motors to these part numbers to determine the full length before making a decision.
Chris
On Thu, Jun 4, 2026 at 7:50 AM Chris Keller <chrisk@waisales.com> wrote:
Hi Chris
Please verify the open bullets today so we can complete the part number and issue correct quote
We have pricing ready and can send as soon as you confirm.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: doug@toyorobot.com <doug@toyorobot.com>
Sent: Wednesday, June 3, 2026 5:02 PM
To: Sacha Marcroft <sacham@waisales.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Mario Garcia' <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; 'Brandon Benavidez' <bbenavidez@turnpack.com>; 'Lorena Carrillo' <lcarrillo@turnpack.com>; 'TOYO TA1' <ta1@toyorobot.com>; 'Eric Zeng' <ericzeng@toyorobotics.com>; 'Doug Kiernan' <doug@toyorobotics.com>
Subject: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesChris B,
As a follow up to our meeting today.
Here are options for a 24x36 envelope cantilvered system.
Standard actuator leadtime ~3-4 weeks
Create MAS Kit +1-2 weeks.
Catalog section attached.
You can download models here – https://toyo.partcommunity.com/
GLTH12-L?-600-B?-M40-E5
Pick lead, 6, 12, 24mm
600mm stroke = 873mm (34.3”) OAL
Confirm motor position, BL/BR/BM
Confirm motor mount
GLTH8-L?-300-B?-M40-E5
Pick lead, 6, 12, 24mm
300mm stroke = 592mm (23.3”) OAL
Confirm motor position, BL/BR/BM
Confirm motor mount
GLTH5-L?-150-B?-M40-E5
Pick lead, 2, 6, 12, 20mm
Confirm motor position, BL/BR/BM – do you need parallel mount or is in-line, BC okay?
Confirm motor mount
Do you want any limit or home sensors?
Regards,
Doug KiernanTOYO Automation
415.264.9787
*Please note my new email and update your CRM: doug@toyorobotics.com
New TOYO Robotics Americas website going live soon!
From: Sacha Marcroft <sacham@waisales.com>
Sent: Friday, May 22, 2026 11:15 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>; doug@toyorobot.com; TOYO TA1 <ta1@toyorobot.com>; Eric Zeng <ericzeng@toyorobotics.com>
Subject: RE: Place holder for todays call - second system with Motors and DrivesYeah sure we discussed potentially having a traveler on X so was looking at the clearance. With traveler we don’t need the GTH12 since we are splitting the load. The Gth8 Carriage is 160mm (sorry mentioned 120mm that was incorrect) and Z is roughly 55mm wide. We can add an undriven GTH5 traveler (very smooth) traveler or profile so there is no interfere with Y and Z axis on the traveler side.
Rough concept shows profile rail but we use our actuators as travelers as well.
Sacha Marcroft
VP Motion Division
Western Automation
714-473-4883
From: Christopher Berger <cberger@turnpack.com>
Sent: Friday, May 22, 2026 10:45 AM
To: Sacha Marcroft <sacham@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>; doug@toyorobot.com; TOYO TA1 <ta1@toyorobot.com>; Eric Zeng <ericzeng@toyorobotics.com>
Subject: Re: Place holder for todays call - second system with Motors and DrivesThanks Sacha. Looking at the model and your email you are proposing a T-style gantry which we would prefer for clearance reasons but can you briefly explain what you mean by this bullet point?
- GTH8 with motor wrap and 600mm travel is 35” long. Carriage is 120mm and the Width 80mm so traveler or X’ would fit nicely below.
Thanks
Chris
On Fri, May 22, 2026 at 9:19 AM Sacha Marcroft <sacham@waisales.com> wrote:
Hey Gents,
First pass at the larger T stage. T stage Spec’s below and potential solution stages reviewed. Let me know your initial thoughts then we will move to providing a MAS quote.
Attached is the XY potential using GTH12 on x and GTH8 on Y for the 36”x 24” plate.
- XYZ Ballscrew stages for 36" x 24" baseplate without motors (we have/can get Omron Servo Motors)
- XYZ Ballscrew stages for 36" x 24" baseplate with motors
- MAS Ballscrew system for 36" x 24" with Motors
- Option: Add Linear encoder
36” long axis:
- GTH12 with motor wrap and 600mm travel is 34.4” long
- GTH12 with motor wrap and 650mm travel is 36.35” long
- GTH8 with motor wrap and 600mm travel is 35” long. Carriage is 120mm and the Width 80mm so traveler or X’ would fit nicely below.
24” axis:
- GTH8 with motor wrap and 300mm travel is 23.26” long.
6” Z axis:
- GTH5 with motor wrap and 150mm travel is 14.25” long. With motor wrap we need to consider 60mm motor mount. I am sure they have made one but need to check. The stage is 52mm wide model shows a 100w motor
Sacha Marcroft
VP Motion Division
Western Automation
714-473-4883
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, May 21, 2026 3:49 PM
To: Sacha Marcroft <sacham@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Place holder for todays call - second system with Motors and DrivesJust to summarize this one more time:
- FactoryLab
- XYZ Ballscrew stages for 20" x 19" baseplate without motors (we have/can get Omron Servo Motors) -> We are ready to order
- XYZ Ballscrew stages for 20" x 19" baseplate with motors
- MAS Ballscrew system for 20" x 19" with Motors
- Option: Add Linear encoder
- FactoryCube
- XYZ Gantry Linear stages: 400mm dual Y, 500mm X, 150mm Z
- XYZ Gantry Ballscrew stages: 400mm dual Y, 500mm X, 150mm Z
- XXYY Wafer table: ballscrew 350mm min travel for 12" wafer -> We are ready to order
- Option: Add Linear Encoder to Ballscrew stages
- FactoryRobot:
- XYZ Ballscrew stages for 36" x 24" baseplate without motors (we have/can get Omron Servo Motors)
- XYZ Ballscrew stages for 36" x 24" baseplate with motors
- MAS Ballscrew system for 36" x 24" with Motors
- Option: Add Linear encoder
What we will place orders for depends on lead time and pricing but I am interested to get lead time and pricing for all listed items.
Chris
On Thu, May 21, 2026 at 1:28 PM Sacha Marcroft <sacham@waisales.com> wrote:
Let me know if this time slot fits and if not make recommendations for another slot.
Thanks,
________________________________________________________________________________
Microsoft Teams meeting
Meeting ID: 227 243 475 332 88
Passcode: 7dg33tp2
Dial in by phone
+1 469-998-7643,,99664092# United States, Dallas
Phone conference ID: 996 640 92#
For organizers: Meeting options | Reset dial-in PIN
________________________________________________________________________________
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
CONFIDENTIALITY NOTICE: This e-mail transmission and any documents, files or previous messages attached to it may contain confidential or legally privileged information. If you are not the intended recipient, you are hereby notified that you must not read this transmission and that any disclosure, copying, printing, distribution or use of any of the information contained in or attached to this transmission is strictly prohibited. If you received this transmission in error, please immediately notify the sender by telephone or return e-mail and delete the original transmission and its attachments without reading or saving in any manner.
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--Christopher Berger
by Chris Berger - 10:26 - 16 Jul 2026 - PO26211760: 300mm x 200mm x 100mm -> new ship date 07/23 + transit time?
-
RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?
All, we pinged Toyo for tracking information and have the following update this morning:
We're sorry to inform you that this shipment has been postponed to July 23 due to a shortage of the MAS-bracket and motor mount. Please rest assured we are closely following up and doing our best to have the goods ready for shipment as soon as possible.
We've let Toyo know we'd prefer to be informed upfront on delivery delays moving forward.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Chris Keller
Sent: Wednesday, July 15, 2026 8:30 AM
To: Info at Turnpack <info@turnpack.com>; Jayna Hanselman <jaynah@msitec.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Christopher Berger <cberger@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Hi Jayna
Did you receive tracking info from Toyo yet?
I just pinged Cindy and Eric at factory to send over in case you have not seen it yet.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Info at Turnpack <info@turnpack.com>
Sent: Tuesday, July 14, 2026 5:32 PM
To: Jayna Hanselman <jaynah@msitec.com>
Cc: Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Christopher Berger <cberger@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?You don't often get email from info@turnpack.com. Learn why this is important
Hello team, any update on this order?
Respectfully,
Lorena CarrilloOn Mon, Jul 6, 2026, 9:54 AM Jayna Hanselman <jaynah@msitec.com> wrote:
Thank you, Chris!
Jayna Hanselman| Account Coordinator
MSI TEC
p: 602-426-1333
w: msitec.com
From: Chris Keller <chrisk@waisales.com>
Sent: Monday, July 6, 2026 9:30 AM
To: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>; Jayna Hanselman <jaynah@msitec.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Hey guys
Hope everyone had a nice holiday weekend.
The ship date from production team was then confirmed July 16, but we have asked them to expedite the order, and they are now targeting shipment on July 10.
We will keep you posted if there any changes. Thanks.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Thursday, July 2, 2026 12:29 PM
To: 'Mario Garcia' <mario.garcia@msitec.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Hello Team please see updated ship date for these parts.
Thank you for your time,
Lorena Carrillo
From: Mario Garcia <mario.garcia@msitec.com>
Sent: Monday, June 29, 2026 6:14 PM
To: Christopher Berger <cberger@turnpack.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Chris,
These are meant to work with the 60mm frame Omron motor below; image received by Brandon last week
Omron Motor [Shaft Diameter = 11mm]:
From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, June 29, 2026 4:11 PM
To: Mario Garcia <mario.garcia@msitec.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Thanks Mario. These will also work with the Omron motors, correct?
@Lorena Carrillo If Mario confirms please proceed and place the order. I will create the project to assign this to.
Chris
On Mon, Jun 29, 2026 at 4:07 PM Mario Garcia <mario.garcia@msitec.com> wrote:
Brandon,
You can proceed with same pricing as before. After we get a Purchase order, TOYO will generate drawings for you to approve. Shipping after receipt of order is about 4 weeks.
X: GLTH12-L12-600-BL-Y40-C4P2
Price: $1,970 each + 10% Tariff
Y: GLTH8-L12-300-BL-Y20-C4P2
Price: $1,167 each+ 10% Tariff
Z: GLTH5-L6-150-BC-Y10B-C4P2
Price: $970 each + 10% Tariff
Estimated Shipping for QTY(1) each above is ~$250 total
4 week Lead Time
MARIO GARCIA | FIELD AUTOMATION ENGINEER
MSITEC
p: 602.426.1333 | c: 480.299.4701
w: msitec.com
From: Brandon Benavidez <bbenavidez@turnpack.com>
Sent: Tuesday, June 23, 2026 8:32 AM
To: Chris Keller <chrisk@waisales.com>; Mario Garcia <mario.garcia@msitec.com>
Cc: Christopher Berger <cberger@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Chris/Mario,
Yesterday, we were able to look more closely at the 24" x 36" [FactoryRobot] machine and found one small change we'd like to make. When you get a chance, please update the quote to include the following changes (including those needed for the appropriate motor mounting). Since this is just for the actuators, can you ensure they will work with our current Omron motors? The CAD I currently have for the actuators lacks the appropriate mounting. I've included the Omron motor drawing below for reference.
Actuator Part Numbers:
X: GLTH12-L12-600-BL-Y40-C4P2
Y: GLTH8-L12-300-BL-Y20-C4P2_0 [Previously was: GLTH8-L12-300-BR-Y20-C4P2_0]
Z: GLTH5-L6-150-BC-Y10B-C4P2_0
Omron Motor [Shaft Diameter = 11mm]:
Please let us know if you need anything additional. Thank you
Best regards,
Brandon Benavidez - Mechanical Engineer
Turnpack, LLC
Phone #: 1 (480) 276-2897
On Mon, Jun 22, 2026 at 6:53 AM Chris Keller <chrisk@waisales.com> wrote:
Hello all
The estimated ship date from Toyo for the ordered actuators for 19”x20” FactoryLab is 7/11.
@Mario Garcia – Cindy at Toyo will have tracking on/by July 11th.
@Christopher Berger/@Lorena Carrillo – did you place the PO for the actuators for 24”x36” FactoryRobot with MSI on Friday?
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Chris Keller
Sent: Friday, June 19, 2026 11:00 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesGood to hear on the 24” x 36”.
Totally understand the time constraint issue.
Checking on that PO placed on 6/10 and will provide delivery update by Monday.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, June 18, 2026 9:40 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesThe 24" x 36" will be finalized tomorrow. For the last two weeks we had 0 availability to work on this project and I had hoped to get the orders in before.
Can you confirm that order PO26211760, placed on 06/10 for the 21" x 19" is being processed and still expected to arrive on 07/08?
Chris
On Wed, Jun 17, 2026 at 9:13 AM Chris Keller <chrisk@waisales.com> wrote:
Thanks for the reply and update Lorena.
@'Christopher Berger' is the one to approve.
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Tuesday, June 16, 2026 6:12 PM
To: Chris Keller <chrisk@waisales.com>; 'Christopher Berger' <cberger@turnpack.com>; 'Mario Garcia' <mario.garcia@msitec.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesHi no I have not placed the PO yet. Please confirm final approval.
Thank you for your time,
Lorena Carrillo
From: Chris Keller <chrisk@waisales.com>
Sent: Tuesday, June 16, 2026 7:25 AM
To: Christopher Berger <cberger@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesGood morning Chris and team,
Have you placed the below order with Mario/MSI TEC?
With this, we should have the two XYZ systems (19x20” and 24x36” — Factory Lab and Factory Robot) covered.
I’ll check on delivery dates with Toyo today.
The remaining item is the FactoryCube XXYY. I’ll send a separate note on that shortly.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, June 10, 2026 9:28 AM
To: Mario Garcia <mario.garcia@msitec.com>
Cc: Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesMario,
we'll place the order for these stages by tomorrow:
X: GLTH12-L12-600-BL-Y40-C4P2
Price: $1,970 each + 10% Tariff
Y: GLTH8-L12-300-BR-Y20-C4P2
Price: $1,167 each+ 10% Tariff
Z: GLTH5-L6-150-BC-Y10B-C4P2
Price: $970 each + 10% Tariff
Estimated Shipping for QTY(1) each above is ~$250 total
4 week Lead Time
Chris
On Mon, Jun 8, 2026 at 4:00 PM Mario Garcia <mario.garcia@msitec.com> wrote:
Chris,
Pricing below for Actuators Only. I do also provide a ball park price on a MultiAxisSystem version. If its within budget, we can send you a formal quote and 3D file for the MultiAxis System; we need commitment from the customer of an upcoming purchase as this take some engineering time to prepare.
X: GLTH12-L12-600-BL-Y40-C4P2
Price: $1,970 each + 10% Tariff
Y: GLTH8-L12-300-BR-Y20-C4P2
Price: $1,167 each+ 10% Tariff
Z: GLTH5-L6-150-BC-Y10B-C4P2
Price: $970 each + 10% Tariff
Estimated Shipping for QTY(1) each above is ~$250 total
4 week Lead Time
Multi Axis System Price ~$5,300 + 10% Tariff + $500 Shipping 5 to 6 weeks Lead Time.
Catalog Download Ball Screw Linear Actuator - GLTH Series
MARIO GARCIA | FIELD AUTOMATION ENGINEER
MSITEC
p: 602.426.1333 | c: 480.299.4701
w: msitec.com
From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, June 8, 2026 7:21 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesChris,
for the 36"x24" Cantilever gantry the way I see this is:
X: GLTH12-L12-600-BL-Y40-C4P2Y: GLTH8-L12-300-BR-Y20-C4P2
Z: GLTH5-L6-150-BC-Y10B-C4P2
I picked Yaskawa motors but for the time being, I guess we'll buy without motors and single stages. I didn't see on the website where it would show me the specs for these stages. Can you send them to me?
Chris
On Fri, Jun 5, 2026 at 10:08 AM Chris Keller <chrisk@waisales.com> wrote:
Sounds good, please let us know if anything is unclear, we know you need this quickly, you mentioned this one is more urgent than the 19X20” Factory Lab…
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, June 4, 2026 10:59 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesChris,
We are looking at the CAD today and hopefully will have an answer EOD. We must attach the motors to these part numbers to determine the full length before making a decision.
Chris
On Thu, Jun 4, 2026 at 7:50 AM Chris Keller <chrisk@waisales.com> wrote:
Hi Chris
Please verify the open bullets today so we can complete the part number and issue correct quote
We have pricing ready and can send as soon as you confirm.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: doug@toyorobot.com <doug@toyorobot.com>
Sent: Wednesday, June 3, 2026 5:02 PM
To: Sacha Marcroft <sacham@waisales.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Mario Garcia' <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; 'Brandon Benavidez' <bbenavidez@turnpack.com>; 'Lorena Carrillo' <lcarrillo@turnpack.com>; 'TOYO TA1' <ta1@toyorobot.com>; 'Eric Zeng' <ericzeng@toyorobotics.com>; 'Doug Kiernan' <doug@toyorobotics.com>
Subject: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesChris B,
As a follow up to our meeting today.
Here are options for a 24x36 envelope cantilvered system.
Standard actuator leadtime ~3-4 weeks
Create MAS Kit +1-2 weeks.
Catalog section attached.
You can download models here – https://toyo.partcommunity.com/
GLTH12-L?-600-B?-M40-E5
Pick lead, 6, 12, 24mm
600mm stroke = 873mm (34.3”) OAL
Confirm motor position, BL/BR/BM
Confirm motor mount
GLTH8-L?-300-B?-M40-E5
Pick lead, 6, 12, 24mm
300mm stroke = 592mm (23.3”) OAL
Confirm motor position, BL/BR/BM
Confirm motor mount
GLTH5-L?-150-B?-M40-E5
Pick lead, 2, 6, 12, 20mm
Confirm motor position, BL/BR/BM – do you need parallel mount or is in-line, BC okay?
Confirm motor mount
Do you want any limit or home sensors?
Regards,
Doug KiernanTOYO Automation
415.264.9787
*Please note my new email and update your CRM: doug@toyorobotics.com
New TOYO Robotics Americas website going live soon!
From: Sacha Marcroft <sacham@waisales.com>
Sent: Friday, May 22, 2026 11:15 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>; doug@toyorobot.com; TOYO TA1 <ta1@toyorobot.com>; Eric Zeng <ericzeng@toyorobotics.com>
Subject: RE: Place holder for todays call - second system with Motors and DrivesYeah sure we discussed potentially having a traveler on X so was looking at the clearance. With traveler we don’t need the GTH12 since we are splitting the load. The Gth8 Carriage is 160mm (sorry mentioned 120mm that was incorrect) and Z is roughly 55mm wide. We can add an undriven GTH5 traveler (very smooth) traveler or profile so there is no interfere with Y and Z axis on the traveler side.
Rough concept shows profile rail but we use our actuators as travelers as well.
Sacha Marcroft
VP Motion Division
Western Automation
714-473-4883
From: Christopher Berger <cberger@turnpack.com>
Sent: Friday, May 22, 2026 10:45 AM
To: Sacha Marcroft <sacham@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>; doug@toyorobot.com; TOYO TA1 <ta1@toyorobot.com>; Eric Zeng <ericzeng@toyorobotics.com>
Subject: Re: Place holder for todays call - second system with Motors and DrivesThanks Sacha. Looking at the model and your email you are proposing a T-style gantry which we would prefer for clearance reasons but can you briefly explain what you mean by this bullet point?
- GTH8 with motor wrap and 600mm travel is 35” long. Carriage is 120mm and the Width 80mm so traveler or X’ would fit nicely below.
Thanks
Chris
On Fri, May 22, 2026 at 9:19 AM Sacha Marcroft <sacham@waisales.com> wrote:
Hey Gents,
First pass at the larger T stage. T stage Spec’s below and potential solution stages reviewed. Let me know your initial thoughts then we will move to providing a MAS quote.
Attached is the XY potential using GTH12 on x and GTH8 on Y for the 36”x 24” plate.
- XYZ Ballscrew stages for 36" x 24" baseplate without motors (we have/can get Omron Servo Motors)
- XYZ Ballscrew stages for 36" x 24" baseplate with motors
- MAS Ballscrew system for 36" x 24" with Motors
- Option: Add Linear encoder
36” long axis:
- GTH12 with motor wrap and 600mm travel is 34.4” long
- GTH12 with motor wrap and 650mm travel is 36.35” long
- GTH8 with motor wrap and 600mm travel is 35” long. Carriage is 120mm and the Width 80mm so traveler or X’ would fit nicely below.
24” axis:
- GTH8 with motor wrap and 300mm travel is 23.26” long.
6” Z axis:
- GTH5 with motor wrap and 150mm travel is 14.25” long. With motor wrap we need to consider 60mm motor mount. I am sure they have made one but need to check. The stage is 52mm wide model shows a 100w motor
Sacha Marcroft
VP Motion Division
Western Automation
714-473-4883
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, May 21, 2026 3:49 PM
To: Sacha Marcroft <sacham@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Place holder for todays call - second system with Motors and DrivesJust to summarize this one more time:
- FactoryLab
- XYZ Ballscrew stages for 20" x 19" baseplate without motors (we have/can get Omron Servo Motors) -> We are ready to order
- XYZ Ballscrew stages for 20" x 19" baseplate with motors
- MAS Ballscrew system for 20" x 19" with Motors
- Option: Add Linear encoder
- FactoryCube
- XYZ Gantry Linear stages: 400mm dual Y, 500mm X, 150mm Z
- XYZ Gantry Ballscrew stages: 400mm dual Y, 500mm X, 150mm Z
- XXYY Wafer table: ballscrew 350mm min travel for 12" wafer -> We are ready to order
- Option: Add Linear Encoder to Ballscrew stages
- FactoryRobot:
- XYZ Ballscrew stages for 36" x 24" baseplate without motors (we have/can get Omron Servo Motors)
- XYZ Ballscrew stages for 36" x 24" baseplate with motors
- MAS Ballscrew system for 36" x 24" with Motors
- Option: Add Linear encoder
What we will place orders for depends on lead time and pricing but I am interested to get lead time and pricing for all listed items.
Chris
On Thu, May 21, 2026 at 1:28 PM Sacha Marcroft <sacham@waisales.com> wrote:
Let me know if this time slot fits and if not make recommendations for another slot.
Thanks,
________________________________________________________________________________
Microsoft Teams meeting
Meeting ID: 227 243 475 332 88
Passcode: 7dg33tp2
Dial in by phone
+1 469-998-7643,,99664092# United States, Dallas
Phone conference ID: 996 640 92#
For organizers: Meeting options | Reset dial-in PIN
________________________________________________________________________________
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
CONFIDENTIALITY NOTICE: This e-mail transmission and any documents, files or previous messages attached to it may contain confidential or legally privileged information. If you are not the intended recipient, you are hereby notified that you must not read this transmission and that any disclosure, copying, printing, distribution or use of any of the information contained in or attached to this transmission is strictly prohibited. If you received this transmission in error, please immediately notify the sender by telephone or return e-mail and delete the original transmission and its attachments without reading or saving in any manner.
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
by "Chris Keller" <chrisk@waisales.com> - 10:21 - 16 Jul 2026 -
Re: Samtec PO48103
Thanks Lindsey.We'll finish the assembly and get it shipped out by Monday.Apologies for the inconvenience.ChrisChristopher BergerOn Thu, Jul 16, 2026, 6:39 AM Lindsey M Lashley <lindsey.lashley@samtec.com> wrote:Hello,
I have purchased 8 belts via Besi webshop/workday. They are under REQ69364. We are okay to perform the installation ourselves and are expecting a 2 week lead time for the arrival of the belts. We can move ahead with the shipment of the transport systems please.
Thanks,
Lindsey
Lindsey Lashley, Process Engineer
Samtec Colorado Springs
Office: 1-800-726-8329
From: Info at Turnpack <info@turnpack.com>
Sent: Wednesday, July 15, 2026 2:59 PM
To: Janina Darling <janina.darling@samtec.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Lindsey M Lashley <lindsey.lashley@samtec.com>; Christopher Berger <CBERGER@turnpack.com>
Subject: Re: Samtec PO48103You don't often get email from info@turnpack.com. Learn why this is important
⚠ CAUTION: This email originated from outside the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
Hi Janina,
Here are the part numbers. You need to order the highlighted part number below. Each buffer line uses two of these parts. Since you purchased both an input and an output buffer from us you will need a minimum of 4. I recommend ordering extras to keep as spares.
Chris
On Mon, Jul 13, 2026 at 11:35 AM Janina Darling <janina.darling@samtec.com> wrote:
Hi Lorena,
Let's do that - can you please send me the Besi part number and qty?
Thank you,
Janina Darling
Janina Darling, Procurement Buyer
Samtec Colorado Springs
Office: 1-800-726-8329
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Friday, July 10, 2026 5:08 PM
To: Janina Darling <janina.darling@samtec.com>; Lindsey M Lashley <lindsey.lashley@samtec.com>
Cc: 'Christopher Berger' <cberger@turnpack.com>
Subject: RE: Samtec PO48103You don't often get email from lcarrillo@turnpack.com. Learn why this is important
⚠ CAUTION: This email originated from outside the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
Hi Janina,
We are having issues with our Besi as a reseller for spare parts since we do not do a high enough volume. Would you be able to purchase the belts and we can offer a $200 discount of the bill. Let me know if this is an acceptable work around for your team.
Thank you for your time,
Lorena Carrillo
From: Janina Darling <janina.darling@samtec.com>
Sent: Wednesday, July 1, 2026 8:07 AM
To: Lorena Carrillo <lcarrillo@turnpack.com>; Lindsey M Lashley <lindsey.lashley@samtec.com>
Cc: 'Christopher Berger' <cberger@turnpack.com>
Subject: Re: Samtec PO48103Hi Lorena,
What is Besi's estimated delivery date for the belts?
Janina Darling, Procurement Buyer
Samtec Colorado Springs
Office: 1-800-726-8329
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Wednesday, June 17, 2026 12:26 PM
To: Janina Darling <janina.darling@samtec.com>; Lindsey M Lashley <lindsey.lashley@samtec.com>
Cc: 'Christopher Berger' <cberger@turnpack.com>
Subject: RE: Samtec PO48103You don't often get email from lcarrillo@turnpack.com. Learn why this is important
Caution: This email originated from outside the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
I do not. Let me see what I can find out for you. Looks like our last update we were waiting on 2 replacement belts on backorder from Besi.
From: Janina Darling <janina.darling@samtec.com>
Sent: Wednesday, June 17, 2026 11:22 AM
To: Info at Turnpack <info@turnpack.com>
Cc: Lindsey M Lashley <lindsey.lashley@samtec.com>
Subject: Re: Samtec PO48103Hi Lorena,
Do you have an update on the status of this order?
Janina Darling, Procurement Buyer
Samtec Colorado Springs
Office: 1-800-726-8329
From: Janina Darling <janina.darling@samtec.com>
Sent: Wednesday, March 11, 2026 11:30 AM
To: Info at Turnpack <info@turnpack.com>
Cc: Lindsey M Lashley <lindsey.lashley@samtec.com>
Subject: Re: Samtec PO48103Hi Lorena,
Thank you for the update. We can wait for the belts. Thank you!
From: Info at Turnpack <info@turnpack.com>
Sent: Wednesday, March 11, 2026 11:04 AM
To: Janina Darling <janina.darling@samtec.com>
Cc: Lindsey M Lashley <lindsey.lashley@samtec.com>
Subject: Re: Samtec PO48103Caution: This email originated from outside the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
We still have not been able to receive confirmation on the belts. how do you wish to proceed?
On Wed, Mar 11, 2026 at 9:26 AM Janina Darling <janina.darling@samtec.com> wrote:
Hi Lorena,
Do you have an update on the status of this oreder?
Janina Darling, Procurement Buyer
Samtec Colorado Springs
Office: 1-800-726-8329
From: Lorena <info@turnpack.com>
Sent: Tuesday, February 24, 2026 11:43 AM
To: Janina Darling <janina.darling@samtec.com>; Lindsey M Lashley <lindsey.lashley@samtec.com>
Subject: RE: Samtec PO48103Caution: This email originated from outside the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
Not at this time. we are still waiting for the belts and do not have a hard confirmation on them as of yet.
Thank you for your time,
Lorena Carrillo
From: Janina Darling <janina.darling@samtec.com>
Sent: Tuesday, February 24, 2026 11:29 AM
To: Lorena <info@turnpack.com>; Lindsey M Lashley <lindsey.lashley@samtec.com>
Subject: Re: Samtec PO48103Hi Lorena,
Do you have an update on the status of this order?
Thank you,
Janina Darling
Janina Darling, Procurement Buyer
Samtec Colorado Springs
Office: 1-800-726-8329
From: Janina Darling <janina.darling@samtec.com>
Sent: Wednesday, January 28, 2026 3:16 PM
To: Lorena <info@turnpack.com>; Lindsey M Lashley <lindsey.lashley@samtec.com>
Subject: Re: Samtec PO48103Hi Lorena,
We don't have belts available. We can wait until you get the belts from Besi.
Thank you,Janina Darling
From: Janina Darling <janina.darling@samtec.com>
Sent: Tuesday, January 27, 2026 3:55 PM
To: Lorena <info@turnpack.com>; Lindsey M Lashley <lindsey.lashley@samtec.com>
Subject: Re: Samtec PO48103@Lindsey M Lashley would you be able to advise on the below?
From: Lorena <info@turnpack.com>
Sent: Monday, January 26, 2026 4:17 PM
To: Janina Darling <janina.darling@samtec.com>
Cc: Lindsey M Lashley <lindsey.lashley@samtec.com>
Subject: RE: Samtec PO48103Caution: This email originated from outside the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
We are just waiting on 2 replacement belts on backorder from Besi then we will be set to ship. Unless you have two belts available. Then we can ship this week.
Current lead time is about 3 weeks.
Please advise.
Thank you for your time,
Lorena Carrillo
From: Janina Darling <janina.darling@samtec.com>
Sent: Monday, January 26, 2026 3:13 PM
To: Lorena <info@turnpack.com>
Cc: Lindsey M Lashley <lindsey.lashley@samtec.com>
Subject: Re: Samtec PO48103Hi Lorena,
Do you have any updates on when this is estimated to be delivered?
Thank you,Janina Darling
Janina Darling, Procurement Buyer
Samtec Colorado Springs
Office: 1-800-726-8329
From: Janina Darling <janina.darling@samtec.com>
Sent: Tuesday, January 13, 2026 2:59 PM
To: Lorena <info@turnpack.com>
Subject: Re: Samtec PO48103Noted, we will update the email in our systems. Thank you Lorena!
Best regards,
Janina Darling
From: Lorena <info@turnpack.com>
Sent: Tuesday, January 13, 2026 2:47 PM
To: Janina Darling <janina.darling@samtec.com>
Subject: FW: Samtec PO48103You don't often get email from info@turnpack.com. Learn why this is important
Caution: This email originated from outside the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
Hi Janina,
Thank you for the order. Your confirmation has been sent out via our system. Please note for faster processing, all POs should be sent to info@turnpack.com.
Thank you for your time,
Lorena Carrillo
From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, January 12, 2026 10:03 AM
To: Info at Turnpack <info@turnpack.com>
Subject: Fwd: Samtec PO48103---------- Forwarded message ---------
From: Janina Darling <janina.darling@samtec.com>
Date: Fri, Jan 2, 2026 at 1:39 PM
Subject: Samtec PO48103
To: CBERGER@TURNPACK.COM <CBERGER@turnpack.com>Hello,
Please see attached PO per quote and confirm.
Thanks,
Janina Darling
Janina Darling, Procurement Buyer
Samtec Colorado Springs
Office: 1-800-726-8329
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
by Chris Berger - 10:02 - 16 Jul 2026 -
RE: Return order
Hi,
Thanks for the email. Please find the shipping Acc Number - can ship ups collect 070686
Regards,
Esha
--------------- Original Message ---------------
From: Turnpack LLC [info@turnpack.com]
Sent: 7/14/2026, 4:07 PM
To: csreturns@dwyeromega.com
Subject: RE: Return order
EXTERNAL EMAIL: DO NOT click links or open attachments unless you trust the sender AND know the content is safe.
Here are the two emails I sent.
From: csreturns@dwyeromega.com <csreturns@dwyeromega.com>
Sent: Tuesday, July 14, 2026 12:05 PM
To: info@turnpack.com
Subject: RE: Return orderHi,
Do you have the cancellation request email for this order? If so, could you please share it with me so that we can proceed.
Regards,
Esha--------------- Original Message ---------------
From: Turnpack LLC [info@turnpack.com]
Sent: 7/13/2026, 4:41 PM
To: csreturns@dwyeromega.com
Subject: RE: Return order
EXTERNAL EMAIL: DO NOT click links or open attachments unless you trust the sender AND know the content is safe.
There is no shipping label attached. You are supposed to provide a label as it was not supposed to ship.
From: csreturns@dwyeromega.com <csreturns@dwyeromega.com>
Sent: Monday, July 13, 2026 1:02 PM
To: info@turnpack.com
Subject: RE: Return orderHi,
We have Processed Credit for your unit, Please find the return instruction.
Regards,
Esha
--------------- Original Message ---------------
From: Turnpack LLC [info@turnpack.com]
Sent: 7/9/2026, 3:10 PM
To: csreturns@dwyeromega.com
Subject: RE: Return order
EXTERNAL EMAIL: DO NOT click links or open attachments unless you trust the sender AND know the content is safe.
You just asked that and I answered? The shipping box is unopened so the product is unopened. I just need a label to return since this order should have never shipped as I cancelled it prior to shipping.
From: csreturns@dwyeromega.com <csreturns@dwyeromega.com>
Sent: Thursday, July 9, 2026 12:44 PM
To: info@turnpack.com
Subject: Re: Return orderHi,
Can you Confirm whether the unit is new and unused
Regards,
Esha
--------------- Original Message ---------------
From: Info at Turnpack [info@turnpack.com]
Sent: 7/6/2026, 3:01 PM
To: csreturns@dwyeromega.com
Subject: Re: Return order
EXTERNAL EMAIL: DO NOT click links or open attachments unless you trust the sender AND know the content is safe.
Hi yes it is unused if you check the email thread I requested a cancel due to a long lead time we didnt notice but the order was processed and shipped anyway. We were told we can return so I am requesting the return.
Respectfully,
Lorena CarrilloOn Mon, Jul 6, 2026, 12:59 PM csreturns@dwyeromega.com <csreturns@dwyeromega.com> wrote:
Hi,
can you confirm whether the unit is new and unused
Regards,
Esha
thread::v8jjcHABNPC4rSXl7oiyKAc::
by "csreturns@dwyeromega.com" <csreturns@dwyeromega.com> - 10:02 - 16 Jul 2026 -
RE: Turnpack, LLC Invoice (Ref INV/2026/06/0007)
Hi Lorena,
Can you please fill in the attached.
Many thanks.
Karen.
From: Lorena Carrillo <info@turnpack.com>
Sent: 15 July 2026 19:18
To: Yates, Karen
Subject: Turnpack, LLC Invoice (Ref INV/2026/06/0007)IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Dear Karen Yates (Spectrum Control Ltd), Please see attached invoice INV/2026/06/0007 (with reference: SO26251079) amounting in $ 1,695.21 from [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏
INV/2026/06/0007
$ 1,695.21 due 6/26/26
Dear Karen Yates (Spectrum Control Ltd),
Please see attached invoice INV/2026/06/0007 (with reference: SO26251079) amounting in $ 1,695.21 from Turnpack, LLC. Please remit payment at your earliest convenience.
Please use the following communication for your payment: INV/2026/06/0007.If you have received this email in error, please reply with the proper contact.
Please reply to this email or resend an email to info@turnpack.com, with any questions, comments, or concerns regarding your order.Your prompt payment is greatly appreciated. To avoid any interest or penalties on invoices over the stated payment terms, please remit payment by date stated on your invoice.
If payment has not been received by the 5th late business day an APR of 7.75% will be charged daily until payment in full has been received. Client is responsible for all collection costs deemed reasonable by Turnpack.NOTE: while ACH is our preferred payment method we do accepts checks. Please make check payable to: "Turnpack LLC" and mail to the address below. Credit card is accepted upon request with a 3.6% fee.
Turnpack LLC
22425 S Scotland Ct
Suite 104
Queen Creek, AZ 85142Turnpack — Efficiency Redefined Through Automation
by Karen Yates - 09:46 - 16 Jul 2026 -
RE: Samtec PO48103
Hello,
I have purchased 8 belts via Besi webshop/workday. They are under REQ69364. We are okay to perform the installation ourselves and are expecting a 2 week lead time for the arrival of the belts. We can move ahead with the shipment of the transport systems please.
Thanks,
Lindsey
Lindsey Lashley, Process Engineer
Samtec Colorado Springs
Office: 1-800-726-8329
From: Info at Turnpack <info@turnpack.com>
Sent: Wednesday, July 15, 2026 2:59 PM
To: Janina Darling <janina.darling@samtec.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Lindsey M Lashley <lindsey.lashley@samtec.com>; Christopher Berger <CBERGER@turnpack.com>
Subject: Re: Samtec PO48103You don't often get email from info@turnpack.com. Learn why this is important
⚠ CAUTION: This email originated from outside the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
Hi Janina,
Here are the part numbers. You need to order the highlighted part number below. Each buffer line uses two of these parts. Since you purchased both an input and an output buffer from us you will need a minimum of 4. I recommend ordering extras to keep as spares.
Chris
On Mon, Jul 13, 2026 at 11:35 AM Janina Darling <janina.darling@samtec.com> wrote:
Hi Lorena,
Let's do that - can you please send me the Besi part number and qty?
Thank you,
Janina Darling
Janina Darling, Procurement Buyer
Samtec Colorado Springs
Office: 1-800-726-8329
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Friday, July 10, 2026 5:08 PM
To: Janina Darling <janina.darling@samtec.com>; Lindsey M Lashley <lindsey.lashley@samtec.com>
Cc: 'Christopher Berger' <cberger@turnpack.com>
Subject: RE: Samtec PO48103You don't often get email from lcarrillo@turnpack.com. Learn why this is important
⚠ CAUTION: This email originated from outside the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
Hi Janina,
We are having issues with our Besi as a reseller for spare parts since we do not do a high enough volume. Would you be able to purchase the belts and we can offer a $200 discount of the bill. Let me know if this is an acceptable work around for your team.
Thank you for your time,
Lorena Carrillo
From: Janina Darling <janina.darling@samtec.com>
Sent: Wednesday, July 1, 2026 8:07 AM
To: Lorena Carrillo <lcarrillo@turnpack.com>; Lindsey M Lashley <lindsey.lashley@samtec.com>
Cc: 'Christopher Berger' <cberger@turnpack.com>
Subject: Re: Samtec PO48103Hi Lorena,
What is Besi's estimated delivery date for the belts?
Janina Darling, Procurement Buyer
Samtec Colorado Springs
Office: 1-800-726-8329
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Wednesday, June 17, 2026 12:26 PM
To: Janina Darling <janina.darling@samtec.com>; Lindsey M Lashley <lindsey.lashley@samtec.com>
Cc: 'Christopher Berger' <cberger@turnpack.com>
Subject: RE: Samtec PO48103You don't often get email from lcarrillo@turnpack.com. Learn why this is important
Caution: This email originated from outside the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
I do not. Let me see what I can find out for you. Looks like our last update we were waiting on 2 replacement belts on backorder from Besi.
From: Janina Darling <janina.darling@samtec.com>
Sent: Wednesday, June 17, 2026 11:22 AM
To: Info at Turnpack <info@turnpack.com>
Cc: Lindsey M Lashley <lindsey.lashley@samtec.com>
Subject: Re: Samtec PO48103Hi Lorena,
Do you have an update on the status of this order?
Janina Darling, Procurement Buyer
Samtec Colorado Springs
Office: 1-800-726-8329
From: Janina Darling <janina.darling@samtec.com>
Sent: Wednesday, March 11, 2026 11:30 AM
To: Info at Turnpack <info@turnpack.com>
Cc: Lindsey M Lashley <lindsey.lashley@samtec.com>
Subject: Re: Samtec PO48103Hi Lorena,
Thank you for the update. We can wait for the belts. Thank you!
From: Info at Turnpack <info@turnpack.com>
Sent: Wednesday, March 11, 2026 11:04 AM
To: Janina Darling <janina.darling@samtec.com>
Cc: Lindsey M Lashley <lindsey.lashley@samtec.com>
Subject: Re: Samtec PO48103Caution: This email originated from outside the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
We still have not been able to receive confirmation on the belts. how do you wish to proceed?
On Wed, Mar 11, 2026 at 9:26 AM Janina Darling <janina.darling@samtec.com> wrote:
Hi Lorena,
Do you have an update on the status of this oreder?
Janina Darling, Procurement Buyer
Samtec Colorado Springs
Office: 1-800-726-8329
From: Lorena <info@turnpack.com>
Sent: Tuesday, February 24, 2026 11:43 AM
To: Janina Darling <janina.darling@samtec.com>; Lindsey M Lashley <lindsey.lashley@samtec.com>
Subject: RE: Samtec PO48103Caution: This email originated from outside the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
Not at this time. we are still waiting for the belts and do not have a hard confirmation on them as of yet.
Thank you for your time,
Lorena Carrillo
From: Janina Darling <janina.darling@samtec.com>
Sent: Tuesday, February 24, 2026 11:29 AM
To: Lorena <info@turnpack.com>; Lindsey M Lashley <lindsey.lashley@samtec.com>
Subject: Re: Samtec PO48103Hi Lorena,
Do you have an update on the status of this order?
Thank you,
Janina Darling
Janina Darling, Procurement Buyer
Samtec Colorado Springs
Office: 1-800-726-8329
From: Janina Darling <janina.darling@samtec.com>
Sent: Wednesday, January 28, 2026 3:16 PM
To: Lorena <info@turnpack.com>; Lindsey M Lashley <lindsey.lashley@samtec.com>
Subject: Re: Samtec PO48103Hi Lorena,
We don't have belts available. We can wait until you get the belts from Besi.
Thank you,Janina Darling
From: Janina Darling <janina.darling@samtec.com>
Sent: Tuesday, January 27, 2026 3:55 PM
To: Lorena <info@turnpack.com>; Lindsey M Lashley <lindsey.lashley@samtec.com>
Subject: Re: Samtec PO48103@Lindsey M Lashley would you be able to advise on the below?
From: Lorena <info@turnpack.com>
Sent: Monday, January 26, 2026 4:17 PM
To: Janina Darling <janina.darling@samtec.com>
Cc: Lindsey M Lashley <lindsey.lashley@samtec.com>
Subject: RE: Samtec PO48103Caution: This email originated from outside the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
We are just waiting on 2 replacement belts on backorder from Besi then we will be set to ship. Unless you have two belts available. Then we can ship this week.
Current lead time is about 3 weeks.
Please advise.
Thank you for your time,
Lorena Carrillo
From: Janina Darling <janina.darling@samtec.com>
Sent: Monday, January 26, 2026 3:13 PM
To: Lorena <info@turnpack.com>
Cc: Lindsey M Lashley <lindsey.lashley@samtec.com>
Subject: Re: Samtec PO48103Hi Lorena,
Do you have any updates on when this is estimated to be delivered?
Thank you,Janina Darling
Janina Darling, Procurement Buyer
Samtec Colorado Springs
Office: 1-800-726-8329
From: Janina Darling <janina.darling@samtec.com>
Sent: Tuesday, January 13, 2026 2:59 PM
To: Lorena <info@turnpack.com>
Subject: Re: Samtec PO48103Noted, we will update the email in our systems. Thank you Lorena!
Best regards,
Janina Darling
From: Lorena <info@turnpack.com>
Sent: Tuesday, January 13, 2026 2:47 PM
To: Janina Darling <janina.darling@samtec.com>
Subject: FW: Samtec PO48103You don't often get email from info@turnpack.com. Learn why this is important
Caution: This email originated from outside the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
Hi Janina,
Thank you for the order. Your confirmation has been sent out via our system. Please note for faster processing, all POs should be sent to info@turnpack.com.
Thank you for your time,
Lorena Carrillo
From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, January 12, 2026 10:03 AM
To: Info at Turnpack <info@turnpack.com>
Subject: Fwd: Samtec PO48103---------- Forwarded message ---------
From: Janina Darling <janina.darling@samtec.com>
Date: Fri, Jan 2, 2026 at 1:39 PM
Subject: Samtec PO48103
To: CBERGER@TURNPACK.COM <CBERGER@turnpack.com>Hello,
Please see attached PO per quote and confirm.
Thanks,
Janina Darling
Janina Darling, Procurement Buyer
Samtec Colorado Springs
Office: 1-800-726-8329
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
by "Lindsey M Lashley" <lindsey.lashley@samtec.com> - 09:41 - 16 Jul 2026
Learn more about your mail ❯
Share via: