Archives
Info Inbox
info@turnpack.com
-
Notice of Upcoming Change
Dear Customer,
We are writing to inform you of an important update about your rented or leased space.
Please see the attached notice.
Sincerely,
RightSpace Storage - 3024 - Queen Creek
by 3024@nsabrands.com - 12:37 - 15 Jul 2026 -
Invoice INV2026070003 for 58111.73 has been approved to pay by Intuitive.
Powered by
Invoice INV2026070003 for 58111.73 has been approved to pay by Intuitive.
Good news,
Your invoice has been approved to pay by your customer, Intuitive.
If your customer subsequently marks the invoice as “Paid”, you will get an e-mail notification that the invoice is being paid.
If you have any questions you can simply contact your customer through normal channels or enter a comment on the invoice if your customer allows it.To check the status of the invoice or payment, use the link below:
View Invoice Never Miss an Invoice with Coupa
Orders
Invoices
Payments
Log In Now
Business Spend Management
by do_not_reply@intuitive.coupahost.com - 12:12 - 15 Jul 2026 -
PAID Invoice 28011 from Schneider & Stone, PLC
Schneider & Stone, PLC Invoice Email: billing@chandleraccountant.com Due amount: 0.00 Phone: 480-779-4222 PAIDPowered by QuickBooks.
Dear Christopher Berger:
Thank you for your business - we appreciate it very much.
Sincerely,
Schneider & Stone, PLC
480-779-4222
www.chandleraccountant.com
If you do not recognize the sender or the transaction, reach out to frauds@intuit.com 
Intuit, Inc. All rights reserved. Privacy | Security | Terms of service
by quickbooks@notification.intuit.com - 12:07 - 15 Jul 2026 -
C# 20944185 AZ - Additional Information Requested
12575 Uline Drive · Pleasant Prairie, WI 53158
PHONE (262) 612-4200 · WEB uline.com · FAX (262) 612-4276
July 15, 2026
Turnpack
6922 E Via Northgate
Ste 101
Mesa, AZ 85212
Hello Christopher Berger,
Customer #: 20944185
Thank you for submitting your sales tax exemption information.
In order to qualify for sales tax exemption, please advise how your company uses Non-Packaging Tapes/Adhesives, Tags, Safety/Protection Gear, and Warehouse Supplies to determine if they comply with Arizona regulations.
Once received, your account will be updated accordingly.
Thank you,
Meilin K.
Tax Department
(888) 362-1909
TaxDepartment@uline.com
Upload via www.Uline.com/tax: Sign in requiredCHICAGO · ATLANTA · COLUMBUS · DALLAS · LOS ANGELES · MIAMI · MINNEAPOLIS · NYC/PHILA · RENO · SEATTLE
INTERNATIONAL: MEXICALI · MONTERREY · EDMONTON · TORONTO
by taxdepartment@uline.com - 12:07 - 15 Jul 2026 -
Shipped: 1 Hardware item
Your package was shipped!
OrderedShipped
Out for deliveryDeliveredArriving July 24Turnpack - MESA, AZ - On behalf of TurnpackOrder # 114-2835047-42834441 Hardware item
Total $41.28 
View related transactions in Your Transactions. ©2026 Amazon.com, Inc. or its affiliates. Amazon and all related marks are trademarks of Amazon.com, Inc. or its affiliates, Amazon.com, Inc. 410 Terry Avenue N., Seattle, WA 98109.Your invoice can be accessed here.
One or more items in your shipment was supplied by a different seller than the seller you purchased the item from. Visit Your Orders from a web browser to see the suppliers of these items on your invoices.
Unless otherwise noted, items sold by Amazon are subject to sales tax in selected states or provinces in accordance with the applicable laws of that state. If your order contains one or more items from a seller other than Amazon, it may be subject to local and state or province tax, depending upon the sellers business policies and the location of their operations. For more information, go to tax and seller information.
by "Amazon.com" <shipment-tracking@amazon.com> - 11:54 - 15 Jul 2026 -
RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?
Good morning!
I’ll reach out to our purchasing group and see if they’ve receive tracking information and I’ll advise back shortly.
Thank you!
Jayna Hanselman| Account Coordinator
MSI TEC
p: 602-426-1333
w: msitec.com
From: Chris Keller <chrisk@waisales.com>
Sent: Wednesday, July 15, 2026 8:30 AM
To: Info at Turnpack <info@turnpack.com>; Jayna Hanselman <jaynah@msitec.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Christopher Berger <cberger@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Hi Jayna
Did you receive tracking info from Toyo yet?
I just pinged Cindy and Eric at factory to send over in case you have not seen it yet.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Info at Turnpack <info@turnpack.com>
Sent: Tuesday, July 14, 2026 5:32 PM
To: Jayna Hanselman <jaynah@msitec.com>
Cc: Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Christopher Berger <cberger@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?You don't often get email from info@turnpack.com. Learn why this is important
Hello team, any update on this order?
Respectfully,
Lorena CarrilloOn Mon, Jul 6, 2026, 9:54 AM Jayna Hanselman <jaynah@msitec.com> wrote:
Thank you, Chris!
Jayna Hanselman| Account Coordinator
MSI TEC
p: 602-426-1333
w: msitec.com
From: Chris Keller <chrisk@waisales.com>
Sent: Monday, July 6, 2026 9:30 AM
To: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>; Jayna Hanselman <jaynah@msitec.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Hey guys
Hope everyone had a nice holiday weekend.
The ship date from production team was then confirmed July 16, but we have asked them to expedite the order, and they are now targeting shipment on July 10.
We will keep you posted if there any changes. Thanks.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Thursday, July 2, 2026 12:29 PM
To: 'Mario Garcia' <mario.garcia@msitec.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Hello Team please see updated ship date for these parts.
Thank you for your time,
Lorena Carrillo
From: Mario Garcia <mario.garcia@msitec.com>
Sent: Monday, June 29, 2026 6:14 PM
To: Christopher Berger <cberger@turnpack.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Chris,
These are meant to work with the 60mm frame Omron motor below; image received by Brandon last week
Omron Motor [Shaft Diameter = 11mm]:
From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, June 29, 2026 4:11 PM
To: Mario Garcia <mario.garcia@msitec.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Thanks Mario. These will also work with the Omron motors, correct?
@Lorena Carrillo If Mario confirms please proceed and place the order. I will create the project to assign this to.
Chris
On Mon, Jun 29, 2026 at 4:07 PM Mario Garcia <mario.garcia@msitec.com> wrote:
Brandon,
You can proceed with same pricing as before. After we get a Purchase order, TOYO will generate drawings for you to approve. Shipping after receipt of order is about 4 weeks.
X: GLTH12-L12-600-BL-Y40-C4P2
Price: $1,970 each + 10% Tariff
Y: GLTH8-L12-300-BL-Y20-C4P2
Price: $1,167 each+ 10% Tariff
Z: GLTH5-L6-150-BC-Y10B-C4P2
Price: $970 each + 10% Tariff
Estimated Shipping for QTY(1) each above is ~$250 total
4 week Lead Time
MARIO GARCIA | FIELD AUTOMATION ENGINEER
MSITEC
p: 602.426.1333 | c: 480.299.4701
w: msitec.com
From: Brandon Benavidez <bbenavidez@turnpack.com>
Sent: Tuesday, June 23, 2026 8:32 AM
To: Chris Keller <chrisk@waisales.com>; Mario Garcia <mario.garcia@msitec.com>
Cc: Christopher Berger <cberger@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Chris/Mario,
Yesterday, we were able to look more closely at the 24" x 36" [FactoryRobot] machine and found one small change we'd like to make. When you get a chance, please update the quote to include the following changes (including those needed for the appropriate motor mounting). Since this is just for the actuators, can you ensure they will work with our current Omron motors? The CAD I currently have for the actuators lacks the appropriate mounting. I've included the Omron motor drawing below for reference.
Actuator Part Numbers:
X: GLTH12-L12-600-BL-Y40-C4P2
Y: GLTH8-L12-300-BL-Y20-C4P2_0 [Previously was: GLTH8-L12-300-BR-Y20-C4P2_0]
Z: GLTH5-L6-150-BC-Y10B-C4P2_0
Omron Motor [Shaft Diameter = 11mm]:
Please let us know if you need anything additional. Thank you
Best regards,
Brandon Benavidez - Mechanical Engineer
Turnpack, LLC
Phone #: 1 (480) 276-2897
On Mon, Jun 22, 2026 at 6:53 AM Chris Keller <chrisk@waisales.com> wrote:
Hello all
The estimated ship date from Toyo for the ordered actuators for 19”x20” FactoryLab is 7/11.
@Mario Garcia – Cindy at Toyo will have tracking on/by July 11th.
@Christopher Berger/@Lorena Carrillo – did you place the PO for the actuators for 24”x36” FactoryRobot with MSI on Friday?
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Chris Keller
Sent: Friday, June 19, 2026 11:00 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesGood to hear on the 24” x 36”.
Totally understand the time constraint issue.
Checking on that PO placed on 6/10 and will provide delivery update by Monday.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, June 18, 2026 9:40 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesThe 24" x 36" will be finalized tomorrow. For the last two weeks we had 0 availability to work on this project and I had hoped to get the orders in before.
Can you confirm that order PO26211760, placed on 06/10 for the 21" x 19" is being processed and still expected to arrive on 07/08?
Chris
On Wed, Jun 17, 2026 at 9:13 AM Chris Keller <chrisk@waisales.com> wrote:
Thanks for the reply and update Lorena.
@'Christopher Berger' is the one to approve.
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Tuesday, June 16, 2026 6:12 PM
To: Chris Keller <chrisk@waisales.com>; 'Christopher Berger' <cberger@turnpack.com>; 'Mario Garcia' <mario.garcia@msitec.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesHi no I have not placed the PO yet. Please confirm final approval.
Thank you for your time,
Lorena Carrillo
From: Chris Keller <chrisk@waisales.com>
Sent: Tuesday, June 16, 2026 7:25 AM
To: Christopher Berger <cberger@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesGood morning Chris and team,
Have you placed the below order with Mario/MSI TEC?
With this, we should have the two XYZ systems (19x20” and 24x36” — Factory Lab and Factory Robot) covered.
I’ll check on delivery dates with Toyo today.
The remaining item is the FactoryCube XXYY. I’ll send a separate note on that shortly.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, June 10, 2026 9:28 AM
To: Mario Garcia <mario.garcia@msitec.com>
Cc: Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesMario,
we'll place the order for these stages by tomorrow:
X: GLTH12-L12-600-BL-Y40-C4P2
Price: $1,970 each + 10% Tariff
Y: GLTH8-L12-300-BR-Y20-C4P2
Price: $1,167 each+ 10% Tariff
Z: GLTH5-L6-150-BC-Y10B-C4P2
Price: $970 each + 10% Tariff
Estimated Shipping for QTY(1) each above is ~$250 total
4 week Lead Time
Chris
On Mon, Jun 8, 2026 at 4:00 PM Mario Garcia <mario.garcia@msitec.com> wrote:
Chris,
Pricing below for Actuators Only. I do also provide a ball park price on a MultiAxisSystem version. If its within budget, we can send you a formal quote and 3D file for the MultiAxis System; we need commitment from the customer of an upcoming purchase as this take some engineering time to prepare.
X: GLTH12-L12-600-BL-Y40-C4P2
Price: $1,970 each + 10% Tariff
Y: GLTH8-L12-300-BR-Y20-C4P2
Price: $1,167 each+ 10% Tariff
Z: GLTH5-L6-150-BC-Y10B-C4P2
Price: $970 each + 10% Tariff
Estimated Shipping for QTY(1) each above is ~$250 total
4 week Lead Time
Multi Axis System Price ~$5,300 + 10% Tariff + $500 Shipping 5 to 6 weeks Lead Time.
Catalog Download Ball Screw Linear Actuator - GLTH Series
MARIO GARCIA | FIELD AUTOMATION ENGINEER
MSITEC
p: 602.426.1333 | c: 480.299.4701
w: msitec.com
From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, June 8, 2026 7:21 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesChris,
for the 36"x24" Cantilever gantry the way I see this is:
X: GLTH12-L12-600-BL-Y40-C4P2Y: GLTH8-L12-300-BR-Y20-C4P2
Z: GLTH5-L6-150-BC-Y10B-C4P2
I picked Yaskawa motors but for the time being, I guess we'll buy without motors and single stages. I didn't see on the website where it would show me the specs for these stages. Can you send them to me?
Chris
On Fri, Jun 5, 2026 at 10:08 AM Chris Keller <chrisk@waisales.com> wrote:
Sounds good, please let us know if anything is unclear, we know you need this quickly, you mentioned this one is more urgent than the 19X20” Factory Lab…
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, June 4, 2026 10:59 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesChris,
We are looking at the CAD today and hopefully will have an answer EOD. We must attach the motors to these part numbers to determine the full length before making a decision.
Chris
On Thu, Jun 4, 2026 at 7:50 AM Chris Keller <chrisk@waisales.com> wrote:
Hi Chris
Please verify the open bullets today so we can complete the part number and issue correct quote
We have pricing ready and can send as soon as you confirm.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: doug@toyorobot.com <doug@toyorobot.com>
Sent: Wednesday, June 3, 2026 5:02 PM
To: Sacha Marcroft <sacham@waisales.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Mario Garcia' <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; 'Brandon Benavidez' <bbenavidez@turnpack.com>; 'Lorena Carrillo' <lcarrillo@turnpack.com>; 'TOYO TA1' <ta1@toyorobot.com>; 'Eric Zeng' <ericzeng@toyorobotics.com>; 'Doug Kiernan' <doug@toyorobotics.com>
Subject: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesChris B,
As a follow up to our meeting today.
Here are options for a 24x36 envelope cantilvered system.
Standard actuator leadtime ~3-4 weeks
Create MAS Kit +1-2 weeks.
Catalog section attached.
You can download models here – https://toyo.partcommunity.com/
GLTH12-L?-600-B?-M40-E5
Pick lead, 6, 12, 24mm
600mm stroke = 873mm (34.3”) OAL
Confirm motor position, BL/BR/BM
Confirm motor mount
GLTH8-L?-300-B?-M40-E5
Pick lead, 6, 12, 24mm
300mm stroke = 592mm (23.3”) OAL
Confirm motor position, BL/BR/BM
Confirm motor mount
GLTH5-L?-150-B?-M40-E5
Pick lead, 2, 6, 12, 20mm
Confirm motor position, BL/BR/BM – do you need parallel mount or is in-line, BC okay?
Confirm motor mount
Do you want any limit or home sensors?
Regards,
Doug KiernanTOYO Automation
415.264.9787
*Please note my new email and update your CRM: doug@toyorobotics.com
New TOYO Robotics Americas website going live soon!
From: Sacha Marcroft <sacham@waisales.com>
Sent: Friday, May 22, 2026 11:15 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>; doug@toyorobot.com; TOYO TA1 <ta1@toyorobot.com>; Eric Zeng <ericzeng@toyorobotics.com>
Subject: RE: Place holder for todays call - second system with Motors and DrivesYeah sure we discussed potentially having a traveler on X so was looking at the clearance. With traveler we don’t need the GTH12 since we are splitting the load. The Gth8 Carriage is 160mm (sorry mentioned 120mm that was incorrect) and Z is roughly 55mm wide. We can add an undriven GTH5 traveler (very smooth) traveler or profile so there is no interfere with Y and Z axis on the traveler side.
Rough concept shows profile rail but we use our actuators as travelers as well.
Sacha Marcroft
VP Motion Division
Western Automation
714-473-4883
From: Christopher Berger <cberger@turnpack.com>
Sent: Friday, May 22, 2026 10:45 AM
To: Sacha Marcroft <sacham@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>; doug@toyorobot.com; TOYO TA1 <ta1@toyorobot.com>; Eric Zeng <ericzeng@toyorobotics.com>
Subject: Re: Place holder for todays call - second system with Motors and DrivesThanks Sacha. Looking at the model and your email you are proposing a T-style gantry which we would prefer for clearance reasons but can you briefly explain what you mean by this bullet point?
- GTH8 with motor wrap and 600mm travel is 35” long. Carriage is 120mm and the Width 80mm so traveler or X’ would fit nicely below.
Thanks
Chris
On Fri, May 22, 2026 at 9:19 AM Sacha Marcroft <sacham@waisales.com> wrote:
Hey Gents,
First pass at the larger T stage. T stage Spec’s below and potential solution stages reviewed. Let me know your initial thoughts then we will move to providing a MAS quote.
Attached is the XY potential using GTH12 on x and GTH8 on Y for the 36”x 24” plate.
- XYZ Ballscrew stages for 36" x 24" baseplate without motors (we have/can get Omron Servo Motors)
- XYZ Ballscrew stages for 36" x 24" baseplate with motors
- MAS Ballscrew system for 36" x 24" with Motors
- Option: Add Linear encoder
36” long axis:
- GTH12 with motor wrap and 600mm travel is 34.4” long
- GTH12 with motor wrap and 650mm travel is 36.35” long
- GTH8 with motor wrap and 600mm travel is 35” long. Carriage is 120mm and the Width 80mm so traveler or X’ would fit nicely below.
24” axis:
- GTH8 with motor wrap and 300mm travel is 23.26” long.
6” Z axis:
- GTH5 with motor wrap and 150mm travel is 14.25” long. With motor wrap we need to consider 60mm motor mount. I am sure they have made one but need to check. The stage is 52mm wide model shows a 100w motor
Sacha Marcroft
VP Motion Division
Western Automation
714-473-4883
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, May 21, 2026 3:49 PM
To: Sacha Marcroft <sacham@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Place holder for todays call - second system with Motors and DrivesJust to summarize this one more time:
- FactoryLab
- XYZ Ballscrew stages for 20" x 19" baseplate without motors (we have/can get Omron Servo Motors) -> We are ready to order
- XYZ Ballscrew stages for 20" x 19" baseplate with motors
- MAS Ballscrew system for 20" x 19" with Motors
- Option: Add Linear encoder
- FactoryCube
- XYZ Gantry Linear stages: 400mm dual Y, 500mm X, 150mm Z
- XYZ Gantry Ballscrew stages: 400mm dual Y, 500mm X, 150mm Z
- XXYY Wafer table: ballscrew 350mm min travel for 12" wafer -> We are ready to order
- Option: Add Linear Encoder to Ballscrew stages
- FactoryRobot:
- XYZ Ballscrew stages for 36" x 24" baseplate without motors (we have/can get Omron Servo Motors)
- XYZ Ballscrew stages for 36" x 24" baseplate with motors
- MAS Ballscrew system for 36" x 24" with Motors
- Option: Add Linear encoder
What we will place orders for depends on lead time and pricing but I am interested to get lead time and pricing for all listed items.
Chris
On Thu, May 21, 2026 at 1:28 PM Sacha Marcroft <sacham@waisales.com> wrote:
Let me know if this time slot fits and if not make recommendations for another slot.
Thanks,
________________________________________________________________________________
Microsoft Teams meeting
Meeting ID: 227 243 475 332 88
Passcode: 7dg33tp2
Dial in by phone
+1 469-998-7643,,99664092# United States, Dallas
Phone conference ID: 996 640 92#
For organizers: Meeting options | Reset dial-in PIN
________________________________________________________________________________
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
CONFIDENTIALITY NOTICE: This e-mail transmission and any documents, files or previous messages attached to it may contain confidential or legally privileged information. If you are not the intended recipient, you are hereby notified that you must not read this transmission and that any disclosure, copying, printing, distribution or use of any of the information contained in or attached to this transmission is strictly prohibited. If you received this transmission in error, please immediately notify the sender by telephone or return e-mail and delete the original transmission and its attachments without reading or saving in any manner.
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
by "Jayna Hanselman" <jaynah@msitec.com> - 11:38 - 15 Jul 2026 -
Your shipment was delivered 874331498777
FedEx
Your shipment was delivered. Delivery Date Wed, 07/15/2026
10:22am
Delivered to 10610 METRIC DR, Dallas, TX 75243 Received by CJOHNSON Report missing package How was your delivery? 
Personal message Your Dongle has shipped. Tracking details Tracking ID 874331498777 From Turnpack LLC
christopher berger
22425 S SCOTLAND CT
Suite 104
QUEEN CREEK, AZ, US
85142To Omron
Bradley Dang
10610 Metric Drive
114
Dallas, TX, US
75243Ship date Mon 7/13/2026 12:00 AM Number of pieces 1 Total shipment weight 1.00 LB Service FedEx Ground Reference dongle return TRACK SHIPMENT 
Track your package and see when it's coming With Map View, follow your package's journey and get an estimated delivery time window—so you can plan ahead and avoid missed deliveries. DOWNLOAD THE MOBILE APP This tracking update has been requested by: Company name christopher berger Name Turnpack LLC Email info@turnpack.com 
Please do not respond to this message. This email was sent from an unattended mailbox. This report was generated at approximately 10:33 AM CDT 07/15/2026.All weights are estimated.
To track the latest status of your shipment, click on the tracking number above.
Standard transit is the date and time the package is scheduled to be delivered by, based on the selected service, destination and ship date. Limitations and exceptions may apply. Please see the FedEx Service Guide for terms and conditions of service, including the FedEx Money-Back Guarantee, or contact your FedEx Customer Support representative.
© 2026 Federal Express Corporation. The content of this message is protected by copyright and trademark laws under U.S. and international law. Review our Privacy Notice. All rights reserved.
Thank you for your business.
ID 1026
by "FedEx Tracking" <TrackingUpdates@fedex.com> - 11:38 - 15 Jul 2026 -
RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?
Hi Jayna
Did you receive tracking info from Toyo yet?
I just pinged Cindy and Eric at factory to send over in case you have not seen it yet.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Info at Turnpack <info@turnpack.com>
Sent: Tuesday, July 14, 2026 5:32 PM
To: Jayna Hanselman <jaynah@msitec.com>
Cc: Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Christopher Berger <cberger@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?You don't often get email from info@turnpack.com. Learn why this is important
Hello team, any update on this order?
Respectfully,
Lorena CarrilloOn Mon, Jul 6, 2026, 9:54 AM Jayna Hanselman <jaynah@msitec.com> wrote:
Thank you, Chris!
Jayna Hanselman| Account Coordinator
MSI TEC
p: 602-426-1333
w: msitec.com
From: Chris Keller <chrisk@waisales.com>
Sent: Monday, July 6, 2026 9:30 AM
To: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>; Jayna Hanselman <jaynah@msitec.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Hey guys
Hope everyone had a nice holiday weekend.
The ship date from production team was then confirmed July 16, but we have asked them to expedite the order, and they are now targeting shipment on July 10.
We will keep you posted if there any changes. Thanks.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Thursday, July 2, 2026 12:29 PM
To: 'Mario Garcia' <mario.garcia@msitec.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Hello Team please see updated ship date for these parts.
Thank you for your time,
Lorena Carrillo
From: Mario Garcia <mario.garcia@msitec.com>
Sent: Monday, June 29, 2026 6:14 PM
To: Christopher Berger <cberger@turnpack.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Chris,
These are meant to work with the 60mm frame Omron motor below; image received by Brandon last week
Omron Motor [Shaft Diameter = 11mm]:
From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, June 29, 2026 4:11 PM
To: Mario Garcia <mario.garcia@msitec.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Thanks Mario. These will also work with the Omron motors, correct?
@Lorena Carrillo If Mario confirms please proceed and place the order. I will create the project to assign this to.
Chris
On Mon, Jun 29, 2026 at 4:07 PM Mario Garcia <mario.garcia@msitec.com> wrote:
Brandon,
You can proceed with same pricing as before. After we get a Purchase order, TOYO will generate drawings for you to approve. Shipping after receipt of order is about 4 weeks.
X: GLTH12-L12-600-BL-Y40-C4P2
Price: $1,970 each + 10% Tariff
Y: GLTH8-L12-300-BL-Y20-C4P2
Price: $1,167 each+ 10% Tariff
Z: GLTH5-L6-150-BC-Y10B-C4P2
Price: $970 each + 10% Tariff
Estimated Shipping for QTY(1) each above is ~$250 total
4 week Lead Time
MARIO GARCIA | FIELD AUTOMATION ENGINEER
MSITEC
p: 602.426.1333 | c: 480.299.4701
w: msitec.com
From: Brandon Benavidez <bbenavidez@turnpack.com>
Sent: Tuesday, June 23, 2026 8:32 AM
To: Chris Keller <chrisk@waisales.com>; Mario Garcia <mario.garcia@msitec.com>
Cc: Christopher Berger <cberger@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Chris/Mario,
Yesterday, we were able to look more closely at the 24" x 36" [FactoryRobot] machine and found one small change we'd like to make. When you get a chance, please update the quote to include the following changes (including those needed for the appropriate motor mounting). Since this is just for the actuators, can you ensure they will work with our current Omron motors? The CAD I currently have for the actuators lacks the appropriate mounting. I've included the Omron motor drawing below for reference.
Actuator Part Numbers:
X: GLTH12-L12-600-BL-Y40-C4P2
Y: GLTH8-L12-300-BL-Y20-C4P2_0 [Previously was: GLTH8-L12-300-BR-Y20-C4P2_0]
Z: GLTH5-L6-150-BC-Y10B-C4P2_0
Omron Motor [Shaft Diameter = 11mm]:
Please let us know if you need anything additional. Thank you
Best regards,
Brandon Benavidez - Mechanical Engineer
Turnpack, LLC
Phone #: 1 (480) 276-2897
On Mon, Jun 22, 2026 at 6:53 AM Chris Keller <chrisk@waisales.com> wrote:
Hello all
The estimated ship date from Toyo for the ordered actuators for 19”x20” FactoryLab is 7/11.
@Mario Garcia – Cindy at Toyo will have tracking on/by July 11th.
@Christopher Berger/@Lorena Carrillo – did you place the PO for the actuators for 24”x36” FactoryRobot with MSI on Friday?
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Chris Keller
Sent: Friday, June 19, 2026 11:00 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesGood to hear on the 24” x 36”.
Totally understand the time constraint issue.
Checking on that PO placed on 6/10 and will provide delivery update by Monday.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, June 18, 2026 9:40 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesThe 24" x 36" will be finalized tomorrow. For the last two weeks we had 0 availability to work on this project and I had hoped to get the orders in before.
Can you confirm that order PO26211760, placed on 06/10 for the 21" x 19" is being processed and still expected to arrive on 07/08?
Chris
On Wed, Jun 17, 2026 at 9:13 AM Chris Keller <chrisk@waisales.com> wrote:
Thanks for the reply and update Lorena.
@'Christopher Berger' is the one to approve.
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Tuesday, June 16, 2026 6:12 PM
To: Chris Keller <chrisk@waisales.com>; 'Christopher Berger' <cberger@turnpack.com>; 'Mario Garcia' <mario.garcia@msitec.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesHi no I have not placed the PO yet. Please confirm final approval.
Thank you for your time,
Lorena Carrillo
From: Chris Keller <chrisk@waisales.com>
Sent: Tuesday, June 16, 2026 7:25 AM
To: Christopher Berger <cberger@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesGood morning Chris and team,
Have you placed the below order with Mario/MSI TEC?
With this, we should have the two XYZ systems (19x20” and 24x36” — Factory Lab and Factory Robot) covered.
I’ll check on delivery dates with Toyo today.
The remaining item is the FactoryCube XXYY. I’ll send a separate note on that shortly.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, June 10, 2026 9:28 AM
To: Mario Garcia <mario.garcia@msitec.com>
Cc: Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesMario,
we'll place the order for these stages by tomorrow:
X: GLTH12-L12-600-BL-Y40-C4P2
Price: $1,970 each + 10% Tariff
Y: GLTH8-L12-300-BR-Y20-C4P2
Price: $1,167 each+ 10% Tariff
Z: GLTH5-L6-150-BC-Y10B-C4P2
Price: $970 each + 10% Tariff
Estimated Shipping for QTY(1) each above is ~$250 total
4 week Lead Time
Chris
On Mon, Jun 8, 2026 at 4:00 PM Mario Garcia <mario.garcia@msitec.com> wrote:
Chris,
Pricing below for Actuators Only. I do also provide a ball park price on a MultiAxisSystem version. If its within budget, we can send you a formal quote and 3D file for the MultiAxis System; we need commitment from the customer of an upcoming purchase as this take some engineering time to prepare.
X: GLTH12-L12-600-BL-Y40-C4P2
Price: $1,970 each + 10% Tariff
Y: GLTH8-L12-300-BR-Y20-C4P2
Price: $1,167 each+ 10% Tariff
Z: GLTH5-L6-150-BC-Y10B-C4P2
Price: $970 each + 10% Tariff
Estimated Shipping for QTY(1) each above is ~$250 total
4 week Lead Time
Multi Axis System Price ~$5,300 + 10% Tariff + $500 Shipping 5 to 6 weeks Lead Time.
Catalog Download Ball Screw Linear Actuator - GLTH Series
MARIO GARCIA | FIELD AUTOMATION ENGINEER
MSITEC
p: 602.426.1333 | c: 480.299.4701
w: msitec.com
From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, June 8, 2026 7:21 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesChris,
for the 36"x24" Cantilever gantry the way I see this is:
X: GLTH12-L12-600-BL-Y40-C4P2Y: GLTH8-L12-300-BR-Y20-C4P2
Z: GLTH5-L6-150-BC-Y10B-C4P2
I picked Yaskawa motors but for the time being, I guess we'll buy without motors and single stages. I didn't see on the website where it would show me the specs for these stages. Can you send them to me?
Chris
On Fri, Jun 5, 2026 at 10:08 AM Chris Keller <chrisk@waisales.com> wrote:
Sounds good, please let us know if anything is unclear, we know you need this quickly, you mentioned this one is more urgent than the 19X20” Factory Lab…
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, June 4, 2026 10:59 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesChris,
We are looking at the CAD today and hopefully will have an answer EOD. We must attach the motors to these part numbers to determine the full length before making a decision.
Chris
On Thu, Jun 4, 2026 at 7:50 AM Chris Keller <chrisk@waisales.com> wrote:
Hi Chris
Please verify the open bullets today so we can complete the part number and issue correct quote
We have pricing ready and can send as soon as you confirm.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: doug@toyorobot.com <doug@toyorobot.com>
Sent: Wednesday, June 3, 2026 5:02 PM
To: Sacha Marcroft <sacham@waisales.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Mario Garcia' <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; 'Brandon Benavidez' <bbenavidez@turnpack.com>; 'Lorena Carrillo' <lcarrillo@turnpack.com>; 'TOYO TA1' <ta1@toyorobot.com>; 'Eric Zeng' <ericzeng@toyorobotics.com>; 'Doug Kiernan' <doug@toyorobotics.com>
Subject: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesChris B,
As a follow up to our meeting today.
Here are options for a 24x36 envelope cantilvered system.
Standard actuator leadtime ~3-4 weeks
Create MAS Kit +1-2 weeks.
Catalog section attached.
You can download models here – https://toyo.partcommunity.com/
GLTH12-L?-600-B?-M40-E5
Pick lead, 6, 12, 24mm
600mm stroke = 873mm (34.3”) OAL
Confirm motor position, BL/BR/BM
Confirm motor mount
GLTH8-L?-300-B?-M40-E5
Pick lead, 6, 12, 24mm
300mm stroke = 592mm (23.3”) OAL
Confirm motor position, BL/BR/BM
Confirm motor mount
GLTH5-L?-150-B?-M40-E5
Pick lead, 2, 6, 12, 20mm
Confirm motor position, BL/BR/BM – do you need parallel mount or is in-line, BC okay?
Confirm motor mount
Do you want any limit or home sensors?
Regards,
Doug KiernanTOYO Automation
415.264.9787
*Please note my new email and update your CRM: doug@toyorobotics.com
New TOYO Robotics Americas website going live soon!
From: Sacha Marcroft <sacham@waisales.com>
Sent: Friday, May 22, 2026 11:15 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>; doug@toyorobot.com; TOYO TA1 <ta1@toyorobot.com>; Eric Zeng <ericzeng@toyorobotics.com>
Subject: RE: Place holder for todays call - second system with Motors and DrivesYeah sure we discussed potentially having a traveler on X so was looking at the clearance. With traveler we don’t need the GTH12 since we are splitting the load. The Gth8 Carriage is 160mm (sorry mentioned 120mm that was incorrect) and Z is roughly 55mm wide. We can add an undriven GTH5 traveler (very smooth) traveler or profile so there is no interfere with Y and Z axis on the traveler side.
Rough concept shows profile rail but we use our actuators as travelers as well.
Sacha Marcroft
VP Motion Division
Western Automation
714-473-4883
From: Christopher Berger <cberger@turnpack.com>
Sent: Friday, May 22, 2026 10:45 AM
To: Sacha Marcroft <sacham@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>; doug@toyorobot.com; TOYO TA1 <ta1@toyorobot.com>; Eric Zeng <ericzeng@toyorobotics.com>
Subject: Re: Place holder for todays call - second system with Motors and DrivesThanks Sacha. Looking at the model and your email you are proposing a T-style gantry which we would prefer for clearance reasons but can you briefly explain what you mean by this bullet point?
- GTH8 with motor wrap and 600mm travel is 35” long. Carriage is 120mm and the Width 80mm so traveler or X’ would fit nicely below.
Thanks
Chris
On Fri, May 22, 2026 at 9:19 AM Sacha Marcroft <sacham@waisales.com> wrote:
Hey Gents,
First pass at the larger T stage. T stage Spec’s below and potential solution stages reviewed. Let me know your initial thoughts then we will move to providing a MAS quote.
Attached is the XY potential using GTH12 on x and GTH8 on Y for the 36”x 24” plate.
- XYZ Ballscrew stages for 36" x 24" baseplate without motors (we have/can get Omron Servo Motors)
- XYZ Ballscrew stages for 36" x 24" baseplate with motors
- MAS Ballscrew system for 36" x 24" with Motors
- Option: Add Linear encoder
36” long axis:
- GTH12 with motor wrap and 600mm travel is 34.4” long
- GTH12 with motor wrap and 650mm travel is 36.35” long
- GTH8 with motor wrap and 600mm travel is 35” long. Carriage is 120mm and the Width 80mm so traveler or X’ would fit nicely below.
24” axis:
- GTH8 with motor wrap and 300mm travel is 23.26” long.
6” Z axis:
- GTH5 with motor wrap and 150mm travel is 14.25” long. With motor wrap we need to consider 60mm motor mount. I am sure they have made one but need to check. The stage is 52mm wide model shows a 100w motor
Sacha Marcroft
VP Motion Division
Western Automation
714-473-4883
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, May 21, 2026 3:49 PM
To: Sacha Marcroft <sacham@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Place holder for todays call - second system with Motors and DrivesJust to summarize this one more time:
- FactoryLab
- XYZ Ballscrew stages for 20" x 19" baseplate without motors (we have/can get Omron Servo Motors) -> We are ready to order
- XYZ Ballscrew stages for 20" x 19" baseplate with motors
- MAS Ballscrew system for 20" x 19" with Motors
- Option: Add Linear encoder
- FactoryCube
- XYZ Gantry Linear stages: 400mm dual Y, 500mm X, 150mm Z
- XYZ Gantry Ballscrew stages: 400mm dual Y, 500mm X, 150mm Z
- XXYY Wafer table: ballscrew 350mm min travel for 12" wafer -> We are ready to order
- Option: Add Linear Encoder to Ballscrew stages
- FactoryRobot:
- XYZ Ballscrew stages for 36" x 24" baseplate without motors (we have/can get Omron Servo Motors)
- XYZ Ballscrew stages for 36" x 24" baseplate with motors
- MAS Ballscrew system for 36" x 24" with Motors
- Option: Add Linear encoder
What we will place orders for depends on lead time and pricing but I am interested to get lead time and pricing for all listed items.
Chris
On Thu, May 21, 2026 at 1:28 PM Sacha Marcroft <sacham@waisales.com> wrote:
Let me know if this time slot fits and if not make recommendations for another slot.
Thanks,
________________________________________________________________________________
Microsoft Teams meeting
Meeting ID: 227 243 475 332 88
Passcode: 7dg33tp2
Dial in by phone
+1 469-998-7643,,99664092# United States, Dallas
Phone conference ID: 996 640 92#
For organizers: Meeting options | Reset dial-in PIN
________________________________________________________________________________
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
CONFIDENTIALITY NOTICE: This e-mail transmission and any documents, files or previous messages attached to it may contain confidential or legally privileged information. If you are not the intended recipient, you are hereby notified that you must not read this transmission and that any disclosure, copying, printing, distribution or use of any of the information contained in or attached to this transmission is strictly prohibited. If you received this transmission in error, please immediately notify the sender by telephone or return e-mail and delete the original transmission and its attachments without reading or saving in any manner.
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
by "Chris Keller" <chrisk@waisales.com> - 11:32 - 15 Jul 2026 -
FedEx Billing Online - Invoice Ready for Payment
You have a FedEx invoice ready for payment. Pay now. 
Your invoice is ready for payment Dear christopher berger, Your account ending in 6805 has a new invoice(s) from FedEx ready for payment. Invoice number: Invoice amount: 9-380-20591 40.68 Log in to FedEx® Billing Online to review and pay your invoices. Log In Thank you for your business, FedEx Note: Please do not use this email to submit payment. This email may not be used as a remittance notice. To pay your invoices, please visit FedEx Billing Online. ©2026 FedEx.The content of this message is protected by copyright and trademark laws under U.S. and international law.
Review our privacy policy. All rights reserved.
This message has been sent by an auto responder system. Please do not reply to this message.
ID ENS- 2356
by "BillingOnline" <BillingOnline@fedex.com> - 11:13 - 15 Jul 2026 -
Your Daily Digest for Wed, 7/15 is ready to view
Informed Delivery
COMING TO YOU SOON
Hi, Chris!
You have 5 mailpiece(s) and 0 inbound package(s) arriving soon.
Wednesday
15 July20265
Mailpiece(s)
0
Package(s)
MAIL
View Dashboard Expected Today
5 item(s)
FROM: USPS
PACKAGES
View Dashboard No packages are available to display. 
You may have more mail or packages than are shown in your Daily Digest. To check, go to your Dashboard.
Mail may arrive several days after you receive the notification. Please allow up to a week for delivery before reporting missing mail. Report missing mail.
*These images represent mail pieces that are sorted on USPS® automated equipment. Some of your mail may not be shown here.
You subscribed to this service with USPS® Product Technology Innovation, 475 L`Enfant Plaza SW, Washington, DC 20260.
If you no longer wish to receive daily email notifications, unsubscribe here.
If you need support, please visit user support for Informed Delivery®.
For more information about this service, please visit general information about Informed Delivery.
Copyright © 2026 United States Postal Service®. All Rights Reserved. The Eagle Logo and the trade dress of USPS® Packaging are among the many trademarks of the U.S. Postal Service®.
This is an automated email, please do not reply to this message. This message is for the designated recipient only and may contain privileged, proprietary, or otherwise private information. If you have received it in error, please delete. Any other use of the email by you is prohibited.
by "USPS Informed Delivery" <USPSInformeddelivery@email.informeddelivery.usps.com> - 10:47 - 15 Jul 2026 -
Invoice 184973 from Coating Systems Inc.
Coating Systems Inc.
Invoice Due:Thu, 08/13/2026
184973Amount Due: $62.50
Dear Customer :
Your invoice is attached. Please remit payment at your earliest convenience.
Thank you for your business - we appreciate it very much.
Sincerely,
Coating Systems Inc.
978-937-3712
by Megan - 10:13 - 15 Jul 2026 -
Invoice 184972 from Coating Systems Inc.
Coating Systems Inc.
Invoice Due:Thu, 08/13/2026
184972Amount Due: $90.00
Dear Customer :
Your invoice is attached. Please remit payment at your earliest convenience.
Thank you for your business - we appreciate it very much.
Sincerely,
Coating Systems Inc.
978-937-3712
by Megan - 10:13 - 15 Jul 2026 -
Enjoying your latest purchase?
Walmart Email
Thanks for shopping with us
Check off your to-do list with similar items.
Great Value All Purpose Cleaner with Bleach, Fresh Scent, 32 fl oz
10981 reviews Buy again
Prices may vary online, in stores, and in-app*
Other shoppers also viewed
$0.98 Great Value Cleaner with Bleach, 32 fl oz
9540 reviews 
$2.97 Great Value All Purpose Cleaner with Bleach for Home Surfaces, 32 fl oz
5045 reviews 
$10.99 Method Antibacterial All-Purpose Cleaner Citron 28 fl oz
760 reviews 
$21.75 Clorox Disinfecting All Purpose Cleaner Lemon Scent - Household Cleaner - 2 Pack, 32 oz 
3 reviews
Better when bought together
$1.48 Great Value Bathroom Cleaner with Bleach, 32 fl oz
4962 reviews 
$3.12 Great Value Lemon Scent Foaming Bathroom Cleaner, 22 oz
2305 reviews
*Some items are also available from Walmart and/or Marketplace Sellers online. Prices, terms, and availability may vary. Items sold online by Walmart may be eligible for price match. Items sold by Marketplace Sellers are not eligible for price match. See our Price Match Policy 
Get the appOrder essentials, track spending & save more for your business.
Mobile apps 
Questions? Visit our Help Center
Please note that product availability is limited and prices are subject to change. Do not reply to this email. The inbox is not monitored. If you require assistance, please click here for help. Walmart Business protects your security and privacy. We will never ask for personal information (such as passwords or credit card numbers) in an email newsletter. If you receive such a request, please do not respond to the email. Learn more. See our Privacy Policy. This email is a Walmart Business advertisement. If you do not want to receive these email updates, click here to unsubscribe. Walmart Business, 702 SW 8th St, Bentonville, AR 72712 © 2026 Walmart.
by "Walmart Business" <newsletter@em.business.walmart.com> - 08:37 - 15 Jul 2026 -
Shipped: 1 Lighting & Fans item
Your package was shipped!OrderedShippedOut for deliveryDeliveredArriving tomorrowGeorge - WOBURN, MA - On behalf of TurnpackOrder # 114-9695851-64786621 Lighting & Fans item
Total $183.33 View related transactions in Your Transactions. ©2026 Amazon.com, Inc. or its affiliates. Amazon and all related marks are trademarks of Amazon.com, Inc. or its affiliates, Amazon.com, Inc. 410 Terry Avenue N., Seattle, WA 98109.Your invoice can be accessed here.
Unless otherwise noted, items sold by Amazon are subject to sales tax in selected states or provinces in accordance with the applicable laws of that state. If your order contains one or more items from a seller other than Amazon, it may be subject to local and state or province tax, depending upon the sellers business policies and the location of their operations. For more information, go to tax and seller information.
by "Amazon.com" <shipment-tracking@amazon.com> - 02:57 - 15 Jul 2026 -
Invoice for Your Order PO26281836
InvoiceBilled toTURNPACK LLC
22425 S SCOTLAND CT STE 104
QUEEN CREEK AZ 85142Purchase Order PO26281836 Total $47.65 Invoice 68319162 Invoice Date 7/14/26 Payment Terms 2% 10, Net 30 Deduct $0.71 on merchandise if paid by 7/24/26. Shipped toTurnpack
Ste 102 Lobby
6922 E Via Northgate
Mesa AZ 85212Mail Payment to McMaster-Carr
PO Box 7690
Chicago IL 60680-7690Your Account 438808000 Christopher Berger placed this order.Line Product Ordered Shipped Balance Price Total 1 5537T29 T-Slotted Framing, End Cap for 80 mm High Double Rail, Black 6 Each6 0 2.53 Each15.18 2 5537T942 T-Slotted Framing, Silver Corner Bracket for 80 mm High Rail, 1-5/8" Long 2 Each2 0 10.11 Each20.22 Merchandise 35.40 Shipping 12.25 Total $47.65 Packing List Shipped Weight Carrier Tracking 2396993-01 07/14/2026 2 lb UPS 1Z9293810103495712 Federal ID 36-1458720
by "McMaster-Carr" <invoice.reply@mcmaster.com> - 02:57 - 15 Jul 2026 -
FedEx Billing Online - Invoice Ready for Payment
You have a FedEx invoice ready for payment. Pay now. Your invoice is ready for payment Dear christopher berger, Your account ending in 6805 has a new invoice(s) from FedEx ready for payment. Invoice number: Invoice amount: 9-380-20590 187.78 Log in to FedEx® Billing Online to review and pay your invoices. Log In Thank you for your business, FedEx Note: Please do not use this email to submit payment. This email may not be used as a remittance notice. To pay your invoices, please visit FedEx Billing Online. ©2026 FedEx.The content of this message is protected by copyright and trademark laws under U.S. and international law.
Review our privacy policy. All rights reserved.
This message has been sent by an auto responder system. Please do not reply to this message.
ID ENS- 2356
by "BillingOnline" <BillingOnline@fedex.com> - 01:42 - 15 Jul 2026
Learn more about your mail ❯
Share via: