| |||||||||||||||||||||||
| |||||||||||||||||||||||
Christopher Berger placed this order. | |||||||||||||||||||||||
| |||||||||||||||||||||||
| |||||||||||||||||||||||
| |||||||||||||||||||||||
| Federal ID 36-1458720 | |||||||||||||||||||||||
Thanks and have a great weekend!
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Friday, July 10, 2026 3:31 PM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>; 'Info at Turnpack' <info@turnpack.com>
Cc: 'Keith Chalman' <keith@cti-rep.com>; 'Turnpack, LLC SO26201063' <catchall@turnpack.com>; 'Brandon Benavidez' <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
|
External Email |
Hello Jeff,
Parts are on their way back. Here is the tracking for your reference 874245590452 and you have also been set up for delivery notifications.
Thank you for your time,
Lorena Carrillo
From: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Sent: Friday, July 10, 2026 8:47 AM
To: Info at Turnpack <info@turnpack.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>;
Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Yes we just need the PParts back, you can hold onto the rest.
Thanks!
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Info at Turnpack <info@turnpack.com>
Sent: Friday, July 10, 2026 8:38 AM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>;
Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
|
External Email |
Jeff,
We'll just take a bunch of pictures on our end as well and we should be good to go. Just to confirm we can hold on to the boats and sample parts though, correct?
Chris
On Fri, Jul 10, 2026 at 8:36 AM Galli, Jeff (US) <Jeff.Galli@teledyne.com> wrote:
Ok thank you. I can find the Besi cartoons from the design that I can share when we meet so we have something to base off of.
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Info at Turnpack <info@turnpack.com>
Sent: Friday, July 10, 2026 8:33 AM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Jeff,
I missed the email where you mentioned your production stopped. We'll ship it today for sure and we'll figure out the call later.
Chris
On Fri, Jul 10, 2026 at 8:28 AM Galli, Jeff (US) <Jeff.Galli@teledyne.com> wrote:
Hi Chris,
Are you available for a call today so it can be shipped today so we have it on Monday? I am available after 10am PST today.
Thanks,
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Info at Turnpack <info@turnpack.com>
Sent: Friday, July 10, 2026 8:24 AM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Hi Jeff,
I thought I sent an email yesterday but I may not have. We reviewed the bonding insert and definitely have some questions and need clarification. I was asking if we'd be able to jump on a call Monday and then send them back right after. If that's not possible I will drop them off today. Sorry for the communication gap, not sure what happened.
Chris
On Fri, Jul 10, 2026 at 8:07 AM Galli, Jeff (US) <Jeff.Galli@teledyne.com> wrote:
Good morning,
Can you please confirm if the PParts were shipped back to us?
Thank you,
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Galli, Jeff (US)
Sent: Thursday, July 9, 2026 10:44 AM
To: 'Lorena Carrillo' <lcarrillo@turnpack.com>
Cc: 'Keith Chalman' <keith@cti-rep.com>; 'Turnpack, LLC SO26201063' <catchall@turnpack.com>; 'Brandon Benavidez' <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Thanks Lorena. Sorry I didn’t send the label earlier this week but could you please make sure the PParts get shipped back today? We need them for production again.
Thank you!
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Thursday, July 9, 2026 9:42 AM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Cc: 'Keith Chalman' <keith@cti-rep.com>; 'Turnpack, LLC SO26201063' <catchall@turnpack.com>; 'Brandon Benavidez' <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Thank you yes this looks to be the same label. It is already back with production for when the shipment is ready.
From: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Sent: Thursday, July 9, 2026 8:13 AM
To: Info at Turnpack <info@turnpack.com>
Cc: Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Good morning,
Can you please use the attached label for shipping back the PParts today? Let me know if you have any questions about the parts or want to have a quick call this week or early next week.
Thank you!
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Info at Turnpack <info@turnpack.com>
Sent: Tuesday, June 30, 2026 9:58 PM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Cc: Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Hi Jeff! Thank you for the update. We do not use UPS only Fedex. Could you please either supply a fedex account or send a label we can use?
Respectfully,
Lorena Carrillo
On Tue, Jun 30, 2026, 9:32 PM Galli, Jeff (US) <Jeff.Galli@teledyne.com> wrote:
Hi All,
The parts went out today. Tracking number: 1Z8563AR0393655535.
I am out of office for the next week so you can have the parts for about a week. If you could please ship back the PParts by the beginning of next week that would be appreciated. The other components can be held onto. Please use UPS 8563AR to return the parts to my attention and the address in my signature. I will have some email if you have any questions or want to hop on a quick call.
Thanks!
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Keith Chalman <keith@cti-rep.com>
Sent: Tuesday, June 30, 2026 10:39 AM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>; Info at Turnpack <info@turnpack.com>
Cc: Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Hi Jeff,
Please send to:
Chris Berger
Turnpack
22425 S Scotland Ct, Suite 104
p: 480-648-4686
c: 480-273-4686
Let us know if there are further questions.
Best Regards,
Keith Chalman
President - Chalman Technologies
c (714) 412-5411
a 3150 E. La Palma Ave. Suite K, Anaheim, CA 92806
Manufacturer's Representative for:
(entire principal list at www.cti-rep.com)
From: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Sent: Tuesday, June 30, 2026 9:51 AM
To: Info at Turnpack <info@turnpack.com>; Keith Chalman <keith@cti-rep.com>
Cc: Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Can you confirm the address to ship the parts? I am trying to get them out today.
Thanks,
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Galli, Jeff (US)
Sent: Thursday, June 18, 2026 9:15 AM
To: Info at Turnpack <info@turnpack.com>; Keith Chalman <keith@cti-rep.com>
Cc: Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Good morning
Yes I have been getting some things ready. Trying to build ahead a bit so we can be down a set of pparts because all the ones we have we use weekly for production. Hoping to be able to send them all next week. The part we will need back within a week or so, the boats and parts can be kept for longer.
Sent from Workspace ONE Boxer
On Jun 17, 2026 4:18 PM, Keith Chalman <keith@cti-rep.com> wrote:
External Email
Hi Jeff,
I just wanted to check in to see if you've had a chance to get us the boats and p-parts question mark.
Let us know.
Keith
From: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Sent: Friday, June 5, 2026 7:57 AM
To: Info at Turnpack <info@turnpack.com>
Cc: Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Hi Chris,
Sounds good. I like the option for magnets or bolts if needed.
Good point about the ID axis. On the current systems there are two indexes because of the length of boats. We have a single index at the main but I know it has always been close.
I will work on getting some parts to sent out to you. I might have some older PParts that aren’t used for production that can be sent, otherwise we would need a quick turnaround on the PParts but the boats and other parts could be held on for longer. I’ll try to get those out next week.
If you have some preliminary designs to show I’d be interested in jumping on another quick call just to see them or if it would help clear up any other issues.
Thanks and hope you have a great weekend!
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Info at Turnpack <info@turnpack.com>
Sent: Thursday, June 4, 2026 4:24 PM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Cc: Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Hi Jeff,
Yes, the plan is to use magnets for the top plates instead of bolts. If you want we can use both magnets and bolts, leaving you the option of whether to use the bolts. The 3 boat designs you provided (Boson, BS8X and Tura) should all operate within the envelope of the machine. One item we flagged is that the center to center distance from the first to the last pocket is just under 12" of travel. Depending on the machine configuration with an ID axis the main axis travel can be limited to 10". Can you confirm that there are no existing travel issues with the boat designs you have provided?
What would be very helpful is to have a physical sample of each boat and part, along with the design files. Ideally, you could send us one p-part set for 1-day so we can review the existing design and prevent surprises.
If it makes sense we could jump on another 30min call to confirm a few things and walk through the models you provided.
Chris
On Tue, Jun 2, 2026 at 10:59 AM Galli, Jeff (US) <Jeff.Galli@teledyne.com> wrote:
Hi Keith and Chris,
For the PParts is it possible to have them in/out with magnets and not have to move the track once the base is set? Were you able to stop the boats in the correct position even with the change in the part and boat sizes? For the boson part we have 2 different board sizes (boats are the same), do you need to take a look at that board as well or we can copy the interface of the PPart we are using now?
If that all looks good I will probably go ahead and order. I’m thinking what we will need is:
1x ID Base
4x Main Base
4x Main insert – Boson
2x Main insert – Tura
2x Main insert - BosonHD
1x ID insert - BosonHD
Thanks,
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Keith Chalman <keith@cti-rep.com>
Sent: Monday, June 1, 2026 3:40 PM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Hi Jeff,
Just checking to see if you have any questions on that quote Chris sent? Attached again here.
Let us know.
Best Regards,
Keith Chalman
President - Chalman Technologies
c (714) 412-5411
a 3150 E. La Palma Ave. Suite K, Anaheim, CA 92806
Manufacturer's Representative for:
From: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Sent: Tuesday, May 26, 2026 6:52 PM
To: Turnpack, LLC SO26201063 <catchall@turnpack.com>; Keith Chalman <keith@cti-rep.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Hi Chris and Keith,
Thanks for the quote. I will review it and organize my thoughts a bit and let you know if I have any questions by the end of the week.
Hope you enjoyed your long weekend!
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: May 14-18
Teledyne Confidential; Commercially Sensitive Business Data
From: Chris Berger <info@turnpack.com>
Sent: Tuesday, May 26, 2026 7:23 AM
To: Jeff Galli <jeff.galli@teledyneflir.com>
Subject: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Hi Jeff, Attached is the quote for the split p-part bonding inserts for the 3 products for 1 machine. Let me know if you have any questions. If [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏
SO26201063
$ 21,150.00
Expires on 06/21/2026
Hi Jeff,
Attached is the quote for the split p-part bonding inserts for the 3 products for 1 machine. Let me know if you have any questions.
If you intend to move forward it would be best if you could send us boats and possibly some parts as well just to make sure clearance is not going to be an issue.
Chris
Christopher BergerPhone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
Turnpack — Efficiency Redefined Through Automation
RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Hello Jeff,
Parts are on their way back. Here is the tracking for your reference 874245590452 and you have also been set up for delivery notifications.
Thank you for your time,
Lorena Carrillo
From: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Sent: Friday, July 10, 2026 8:47 AM
To: Info at Turnpack <info@turnpack.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Yes we just need the PParts back, you can hold onto the rest.
Thanks!
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Info at Turnpack <info@turnpack.com>
Sent: Friday, July 10, 2026 8:38 AM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email |
Jeff,
We'll just take a bunch of pictures on our end as well and we should be good to go. Just to confirm we can hold on to the boats and sample parts though, correct?
Chris
On Fri, Jul 10, 2026 at 8:36 AM Galli, Jeff (US) <Jeff.Galli@teledyne.com> wrote:
Ok thank you. I can find the Besi cartoons from the design that I can share when we meet so we have something to base off of.
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Info at Turnpack <info@turnpack.com>
Sent: Friday, July 10, 2026 8:33 AM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Jeff,
I missed the email where you mentioned your production stopped. We'll ship it today for sure and we'll figure out the call later.
Chris
On Fri, Jul 10, 2026 at 8:28 AM Galli, Jeff (US) <Jeff.Galli@teledyne.com> wrote:
Hi Chris,
Are you available for a call today so it can be shipped today so we have it on Monday? I am available after 10am PST today.
Thanks,
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Info at Turnpack <info@turnpack.com>
Sent: Friday, July 10, 2026 8:24 AM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Hi Jeff,
I thought I sent an email yesterday but I may not have. We reviewed the bonding insert and definitely have some questions and need clarification. I was asking if we'd be able to jump on a call Monday and then send them back right after. If that's not possible I will drop them off today. Sorry for the communication gap, not sure what happened.
Chris
On Fri, Jul 10, 2026 at 8:07 AM Galli, Jeff (US) <Jeff.Galli@teledyne.com> wrote:
Good morning,
Can you please confirm if the PParts were shipped back to us?
Thank you,
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Galli, Jeff (US)
Sent: Thursday, July 9, 2026 10:44 AM
To: 'Lorena Carrillo' <lcarrillo@turnpack.com>
Cc: 'Keith Chalman' <keith@cti-rep.com>; 'Turnpack, LLC SO26201063' <catchall@turnpack.com>; 'Brandon Benavidez' <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Thanks Lorena. Sorry I didn’t send the label earlier this week but could you please make sure the PParts get shipped back today? We need them for production again.
Thank you!
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Thursday, July 9, 2026 9:42 AM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Cc: 'Keith Chalman' <keith@cti-rep.com>; 'Turnpack, LLC SO26201063' <catchall@turnpack.com>; 'Brandon Benavidez' <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Thank you yes this looks to be the same label. It is already back with production for when the shipment is ready.
From: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Sent: Thursday, July 9, 2026 8:13 AM
To: Info at Turnpack <info@turnpack.com>
Cc: Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Good morning,
Can you please use the attached label for shipping back the PParts today? Let me know if you have any questions about the parts or want to have a quick call this week or early next week.
Thank you!
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Info at Turnpack <info@turnpack.com>
Sent: Tuesday, June 30, 2026 9:58 PM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Cc: Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Hi Jeff! Thank you for the update. We do not use UPS only Fedex. Could you please either supply a fedex account or send a label we can use?
Respectfully,
Lorena Carrillo
On Tue, Jun 30, 2026, 9:32 PM Galli, Jeff (US) <Jeff.Galli@teledyne.com> wrote:
Hi All,
The parts went out today. Tracking number: 1Z8563AR0393655535.
I am out of office for the next week so you can have the parts for about a week. If you could please ship back the PParts by the beginning of next week that would be appreciated. The other components can be held onto. Please use UPS 8563AR to return the parts to my attention and the address in my signature. I will have some email if you have any questions or want to hop on a quick call.
Thanks!
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Keith Chalman <keith@cti-rep.com>
Sent: Tuesday, June 30, 2026 10:39 AM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>; Info at Turnpack <info@turnpack.com>
Cc: Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Hi Jeff,
Please send to:
Chris Berger
Turnpack
22425 S Scotland Ct, Suite 104
p: 480-648-4686
c: 480-273-4686
Let us know if there are further questions.
Best Regards,
Keith Chalman
President - Chalman Technologies
c (714) 412-5411
a 3150 E. La Palma Ave. Suite K, Anaheim, CA 92806
Manufacturer's Representative for:
(entire principal list at www.cti-rep.com)
From: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Sent: Tuesday, June 30, 2026 9:51 AM
To: Info at Turnpack <info@turnpack.com>; Keith Chalman <keith@cti-rep.com>
Cc: Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Can you confirm the address to ship the parts? I am trying to get them out today.
Thanks,
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Galli, Jeff (US)
Sent: Thursday, June 18, 2026 9:15 AM
To: Info at Turnpack <info@turnpack.com>; Keith Chalman <keith@cti-rep.com>
Cc: Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Good morning
Yes I have been getting some things ready. Trying to build ahead a bit so we can be down a set of pparts because all the ones we have we use weekly for production. Hoping to be able to send them all next week. The part we will need back within a week or so, the boats and parts can be kept for longer.
Sent from Workspace ONE Boxer
On Jun 17, 2026 4:18 PM, Keith Chalman <keith@cti-rep.com> wrote:
External Email
Hi Jeff,
I just wanted to check in to see if you've had a chance to get us the boats and p-parts question mark.
Let us know.
Keith
From: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Sent: Friday, June 5, 2026 7:57 AM
To: Info at Turnpack <info@turnpack.com>
Cc: Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Hi Chris,
Sounds good. I like the option for magnets or bolts if needed.
Good point about the ID axis. On the current systems there are two indexes because of the length of boats. We have a single index at the main but I know it has always been close.
I will work on getting some parts to sent out to you. I might have some older PParts that aren’t used for production that can be sent, otherwise we would need a quick turnaround on the PParts but the boats and other parts could be held on for longer. I’ll try to get those out next week.
If you have some preliminary designs to show I’d be interested in jumping on another quick call just to see them or if it would help clear up any other issues.
Thanks and hope you have a great weekend!
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Info at Turnpack <info@turnpack.com>
Sent: Thursday, June 4, 2026 4:24 PM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Cc: Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Hi Jeff,
Yes, the plan is to use magnets for the top plates instead of bolts. If you want we can use both magnets and bolts, leaving you the option of whether to use the bolts. The 3 boat designs you provided (Boson, BS8X and Tura) should all operate within the envelope of the machine. One item we flagged is that the center to center distance from the first to the last pocket is just under 12" of travel. Depending on the machine configuration with an ID axis the main axis travel can be limited to 10". Can you confirm that there are no existing travel issues with the boat designs you have provided?
What would be very helpful is to have a physical sample of each boat and part, along with the design files. Ideally, you could send us one p-part set for 1-day so we can review the existing design and prevent surprises.
If it makes sense we could jump on another 30min call to confirm a few things and walk through the models you provided.
Chris
On Tue, Jun 2, 2026 at 10:59 AM Galli, Jeff (US) <Jeff.Galli@teledyne.com> wrote:
Hi Keith and Chris,
For the PParts is it possible to have them in/out with magnets and not have to move the track once the base is set? Were you able to stop the boats in the correct position even with the change in the part and boat sizes? For the boson part we have 2 different board sizes (boats are the same), do you need to take a look at that board as well or we can copy the interface of the PPart we are using now?
If that all looks good I will probably go ahead and order. I’m thinking what we will need is:
1x ID Base
4x Main Base
4x Main insert – Boson
2x Main insert – Tura
2x Main insert - BosonHD
1x ID insert - BosonHD
Thanks,
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Keith Chalman <keith@cti-rep.com>
Sent: Monday, June 1, 2026 3:40 PM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Hi Jeff,
Just checking to see if you have any questions on that quote Chris sent? Attached again here.
Let us know.
Best Regards,
Keith Chalman
President - Chalman Technologies
c (714) 412-5411
a 3150 E. La Palma Ave. Suite K, Anaheim, CA 92806
Manufacturer's Representative for:
From: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Sent: Tuesday, May 26, 2026 6:52 PM
To: Turnpack, LLC SO26201063 <catchall@turnpack.com>; Keith Chalman <keith@cti-rep.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Hi Chris and Keith,
Thanks for the quote. I will review it and organize my thoughts a bit and let you know if I have any questions by the end of the week.
Hope you enjoyed your long weekend!
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: May 14-18
Teledyne Confidential; Commercially Sensitive Business Data
From: Chris Berger <info@turnpack.com>
Sent: Tuesday, May 26, 2026 7:23 AM
To: Jeff Galli <jeff.galli@teledyneflir.com>
Subject: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Hi Jeff, Attached is the quote for the split p-part bonding inserts for the 3 products for 1 machine. Let me know if you have any questions. If [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏
SO26201063
$ 21,150.00
Expires on 06/21/2026Hi Jeff,
Attached is the quote for the split p-part bonding inserts for the 3 products for 1 machine. Let me know if you have any questions.
If you intend to move forward it would be best if you could send us boats and possibly some parts as well just to make sure clearance is not going to be an issue.
Chris
Christopher BergerPhone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
Turnpack — Efficiency Redefined Through Automation
RE: Turnpack, LLC Order (Ref PO26231783) 26OC001512
Thank you. please update shipping address to
Turnpack LLC
6922 Via Northgate, Mesa, AZ 85212
From: Orianna O' Mera <o.omera@hiwin.us>
Sent: Friday, July 10, 2026 2:47 PM
To: Turnpack, LLC PO26231783 <catchall@turnpack.com>; info@turnpack.com
Cc: donotreply_oc hiwin.com <donotreply_oc@hiwin.com>
Subject: RE: Turnpack, LLC Order (Ref PO26231783) 26OC001512
Good afternoon,
Apologies for the delay.
Attached is your order confirmation for this PO, please review and let us know if you have any questions.
Please note ship dates are scheduled based on extended lead-times & limited production capacity at this time.
Thank you,
Orianna O’Mera
Business Services Specialist - Orders
Phone: 847.827.2270 Ext. 4424
Direct Line: 630-883-4424
Web: www.hiwin.us
Email: O.OMera@hiwin.us
RFQ Emails: Quotations@Hiwin.com
Purchase Orders: Orders@Hiwin.com
Company Address:12455 Jim Dhamer Dr. Huntley, IL 60142
Notice: HIWIN Corporation (US) is transitioning ERP systems with a go‑live date of May 1, 2026.
From: Lorena Carrillo <info@turnpack.com>
Sent: Wednesday, June 10, 2026 7:24 PM
To: Orders <orders@hiwin.com>
Subject: Turnpack, LLC Order (Ref PO26231783)
Dear Orders (Hiwin) Please find attached purchase order PO26231783 amounting in $ 159.00 from Turnpack, LLC as well as the resale certificate, [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏
| |||
Dear Orders (Hiwin)
Please find attached purchase order PO26231783 amounting in $ 159.00 from Turnpack, LLC as well as the resale certificate, for your review and action.
The receipt is expected for 06/18/2026, if this date is not achievable, please reply with an available date for reconsideration.
**Please acknowledge the receipt of this order and lead time.
Turnpack — Efficiency Redefined Through Automation
Good afternoon,
Apologies for the delay.
Attached is your order confirmation for this PO, please review and let us know if you have any questions.
Please note ship dates are scheduled based on extended lead-times & limited production capacity at this time.
Thank you,
Orianna O’Mera
Business Services Specialist - Orders
Phone: 847.827.2270 Ext. 4424
Direct Line: 630-883-4424
Web: www.hiwin.us
Email: O.OMera@hiwin.us
RFQ Emails: Quotations@Hiwin.com
Purchase Orders: Orders@Hiwin.com
Company Address:12455 Jim Dhamer Dr. Huntley, IL 60142
Notice: HIWIN Corporation (US) is transitioning ERP systems with a go‑live date of May 1, 2026.
From: Lorena Carrillo <info@turnpack.com>
Sent: Wednesday, June 10, 2026 7:24 PM
To: Orders <orders@hiwin.com>
Subject: Turnpack, LLC Order (Ref PO26231783)
Dear Orders (Hiwin) Please find attached purchase order PO26231783 amounting in $ 159.00 from Turnpack, LLC as well as the resale certificate, [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏
|
|
|||
|
|
|||
|
|||
|
|
Dear Orders (Hiwin)
Please find attached purchase order PO26231783 amounting in
$ 159.00 from Turnpack, LLC as well as the resale certificate, for your review and action.
The receipt is expected for 06/18/2026, if this date is not achievable, please reply with an available date for reconsideration.
**Please acknowledge the receipt of this order and lead time.
Turnpack — Efficiency Redefined Through Automation
|
Mark Cunningham
|
|||||||
|
|||||||
|
Hi Chris,
Please close out this entire PO. We had never received the product.
Thank you,Dawn
Dawn Davis
Senior Supply Chain Specialist
t: 480-550-9702
a:
3200 W Germann Road
,
Chandler
Az
85286
From: Chris Berger <notifications@turnpack.com>
Sent: Tuesday, March 18, 2025 10:48 AM
To: Dawn Davis <Dawn.davis@sarasmicro.com>
Subject: Turnpack, LLC Order (Ref SO2506843)
Hello,
Your order SO2506843 amounting in $ 13,121.99 has been confirmed.
Thank you for your trust!
Do not hesitate to contact us if you have any questions.
Christopher Berger
Powered by Odoo
FedEx
|
Dear Customer,
Based on your usage through July 09, 2026 for SRP electric account ***-**9-002 at 22425 S SCOTLAND CT SU 104 your July bill is projected to be approximately $665.00. The bill estimate exceeds the threshold you set in My Account.
If you have questions, please contact us at (602) 236-8833, Monday through Friday, 7 a.m.-5 p.m, or by e-mail at commercl@srpnet.com
Thank you for being a valued SRP business customer.
SRP Customer Services
| Find us on: |
|
|
|
|
Hi Lorena,
Toyo has updated the part number for this order.
Please update your PO and email us a revised PO.
As soon as the factory provides the expected hip date, I’ll notify you.
Thank you!
Jayna Hanselman| Account Coordinator
MSI TEC
p: 602-426-1333
w: msitec.com
From: Lorena Carrillo <info@turnpack.com>
Sent: Tuesday, July 7, 2026 9:29 AM
To: Jayna Hanselman <jaynah@msitec.com>
Subject: Turnpack, LLC Order (Ref PO26261823) revised PO to updatr quantities
Dear Mario Garcia (MSI Tec) Please find attached purchase order PO26261823 with reference: S-ORD34810 (need project code) amounting in $ [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏
|
Dear Mario Garcia (MSI Tec) Please find attached purchase order PO26261823 with reference: S-ORD34810 (need project code) amounting in $ [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏
|
|
|
|
|
|
|
|
|
|
Dear Mario Garcia (MSI Tec)
Please find attached purchase order PO26261823 with reference: S-ORD34810 (need project code) amounting in
$ 9,435.19 from Turnpack, LLC as well as the resale certificate, for your review and action.
The receipt is expected for 06/29/2026, if this date is not achievable, please reply with an available date for reconsideration.
**Please acknowledge the receipt of this order and lead time.
Turnpack — Efficiency Redefined Through Automation
|
|
|
|
|
|
|
|
|
|
|
Yes we just need the PParts back, you can hold onto the rest.
Thanks!
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Info at Turnpack <info@turnpack.com>
Sent: Friday, July 10, 2026 8:38 AM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
|
External Email |
Jeff,
We'll just take a bunch of pictures on our end as well and we should be good to go. Just to confirm we can hold on to the boats and sample parts though, correct?
Chris
On Fri, Jul 10, 2026 at 8:36 AM Galli, Jeff (US) <Jeff.Galli@teledyne.com> wrote:
Ok thank you. I can find the Besi cartoons from the design that I can share when we meet so we have something to base off of.
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Info at Turnpack <info@turnpack.com>
Sent: Friday, July 10, 2026 8:33 AM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Jeff,
I missed the email where you mentioned your production stopped. We'll ship it today for sure and we'll figure out the call later.
Chris
On Fri, Jul 10, 2026 at 8:28 AM Galli, Jeff (US) <Jeff.Galli@teledyne.com> wrote:
Hi Chris,
Are you available for a call today so it can be shipped today so we have it on Monday? I am available after 10am PST today.
Thanks,
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Info at Turnpack <info@turnpack.com>
Sent: Friday, July 10, 2026 8:24 AM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Hi Jeff,
I thought I sent an email yesterday but I may not have. We reviewed the bonding insert and definitely have some questions and need clarification. I was asking if we'd be able to jump on a call Monday and then send them back right after. If that's not possible I will drop them off today. Sorry for the communication gap, not sure what happened.
Chris
On Fri, Jul 10, 2026 at 8:07 AM Galli, Jeff (US) <Jeff.Galli@teledyne.com> wrote:
Good morning,
Can you please confirm if the PParts were shipped back to us?
Thank you,
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Galli, Jeff (US)
Sent: Thursday, July 9, 2026 10:44 AM
To: 'Lorena Carrillo' <lcarrillo@turnpack.com>
Cc: 'Keith Chalman' <keith@cti-rep.com>; 'Turnpack, LLC SO26201063' <catchall@turnpack.com>; 'Brandon Benavidez' <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Thanks Lorena. Sorry I didn’t send the label earlier this week but could you please make sure the PParts get shipped back today? We need them for production again.
Thank you!
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Thursday, July 9, 2026 9:42 AM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Cc: 'Keith Chalman' <keith@cti-rep.com>; 'Turnpack, LLC SO26201063' <catchall@turnpack.com>; 'Brandon Benavidez' <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Thank you yes this looks to be the same label. It is already back with production for when the shipment is ready.
From: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Sent: Thursday, July 9, 2026 8:13 AM
To: Info at Turnpack <info@turnpack.com>
Cc: Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Good morning,
Can you please use the attached label for shipping back the PParts today? Let me know if you have any questions about the parts or want to have a quick call this week or early next week.
Thank you!
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Info at Turnpack <info@turnpack.com>
Sent: Tuesday, June 30, 2026 9:58 PM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Cc: Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Hi Jeff! Thank you for the update. We do not use UPS only Fedex. Could you please either supply a fedex account or send a label we can use?
Respectfully,
Lorena Carrillo
On Tue, Jun 30, 2026, 9:32 PM Galli, Jeff (US) <Jeff.Galli@teledyne.com> wrote:
Hi All,
The parts went out today. Tracking number: 1Z8563AR0393655535.
I am out of office for the next week so you can have the parts for about a week. If you could please ship back the PParts by the beginning of next week that would be appreciated. The other components can be held onto. Please use UPS 8563AR to return the parts to my attention and the address in my signature. I will have some email if you have any questions or want to hop on a quick call.
Thanks!
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Keith Chalman <keith@cti-rep.com>
Sent: Tuesday, June 30, 2026 10:39 AM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>; Info at Turnpack <info@turnpack.com>
Cc: Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Hi Jeff,
Please send to:
Chris Berger
Turnpack
22425 S Scotland Ct, Suite 104
p: 480-648-4686
c: 480-273-4686
Let us know if there are further questions.
Best Regards,
Keith Chalman
President - Chalman Technologies
c (714) 412-5411
a 3150 E. La Palma Ave. Suite K, Anaheim, CA 92806
Manufacturer's Representative for:
(entire principal list at www.cti-rep.com)
From: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Sent: Tuesday, June 30, 2026 9:51 AM
To: Info at Turnpack <info@turnpack.com>; Keith Chalman <keith@cti-rep.com>
Cc: Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Can you confirm the address to ship the parts? I am trying to get them out today.
Thanks,
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Galli, Jeff (US)
Sent: Thursday, June 18, 2026 9:15 AM
To: Info at Turnpack <info@turnpack.com>; Keith Chalman <keith@cti-rep.com>
Cc: Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Good morning
Yes I have been getting some things ready. Trying to build ahead a bit so we can be down a set of pparts because all the ones we have we use weekly for production. Hoping to be able to send them all next week. The part we will need back within a week or so, the boats and parts can be kept for longer.
Sent from Workspace ONE Boxer
On Jun 17, 2026 4:18 PM, Keith Chalman <keith@cti-rep.com> wrote:
External Email
Hi Jeff,
I just wanted to check in to see if you've had a chance to get us the boats and p-parts question mark.
Let us know.
Keith
From: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Sent: Friday, June 5, 2026 7:57 AM
To: Info at Turnpack <info@turnpack.com>
Cc: Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Hi Chris,
Sounds good. I like the option for magnets or bolts if needed.
Good point about the ID axis. On the current systems there are two indexes because of the length of boats. We have a single index at the main but I know it has always been close.
I will work on getting some parts to sent out to you. I might have some older PParts that aren’t used for production that can be sent, otherwise we would need a quick turnaround on the PParts but the boats and other parts could be held on for longer. I’ll try to get those out next week.
If you have some preliminary designs to show I’d be interested in jumping on another quick call just to see them or if it would help clear up any other issues.
Thanks and hope you have a great weekend!
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Info at Turnpack <info@turnpack.com>
Sent: Thursday, June 4, 2026 4:24 PM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Cc: Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Hi Jeff,
Yes, the plan is to use magnets for the top plates instead of bolts. If you want we can use both magnets and bolts, leaving you the option of whether to use the bolts. The 3 boat designs you provided (Boson, BS8X and Tura) should all operate within the envelope of the machine. One item we flagged is that the center to center distance from the first to the last pocket is just under 12" of travel. Depending on the machine configuration with an ID axis the main axis travel can be limited to 10". Can you confirm that there are no existing travel issues with the boat designs you have provided?
What would be very helpful is to have a physical sample of each boat and part, along with the design files. Ideally, you could send us one p-part set for 1-day so we can review the existing design and prevent surprises.
If it makes sense we could jump on another 30min call to confirm a few things and walk through the models you provided.
Chris
On Tue, Jun 2, 2026 at 10:59 AM Galli, Jeff (US) <Jeff.Galli@teledyne.com> wrote:
Hi Keith and Chris,
For the PParts is it possible to have them in/out with magnets and not have to move the track once the base is set? Were you able to stop the boats in the correct position even with the change in the part and boat sizes? For the boson part we have 2 different board sizes (boats are the same), do you need to take a look at that board as well or we can copy the interface of the PPart we are using now?
If that all looks good I will probably go ahead and order. I’m thinking what we will need is:
1x ID Base
4x Main Base
4x Main insert – Boson
2x Main insert – Tura
2x Main insert - BosonHD
1x ID insert - BosonHD
Thanks,
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Keith Chalman <keith@cti-rep.com>
Sent: Monday, June 1, 2026 3:40 PM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Hi Jeff,
Just checking to see if you have any questions on that quote Chris sent? Attached again here.
Let us know.
Best Regards,
Keith Chalman
President - Chalman Technologies
c (714) 412-5411
a 3150 E. La Palma Ave. Suite K, Anaheim, CA 92806
Manufacturer's Representative for:
From: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Sent: Tuesday, May 26, 2026 6:52 PM
To: Turnpack, LLC SO26201063 <catchall@turnpack.com>; Keith Chalman <keith@cti-rep.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Hi Chris and Keith,
Thanks for the quote. I will review it and organize my thoughts a bit and let you know if I have any questions by the end of the week.
Hope you enjoyed your long weekend!
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: May 14-18
Teledyne Confidential; Commercially Sensitive Business Data
From: Chris Berger <info@turnpack.com>
Sent: Tuesday, May 26, 2026 7:23 AM
To: Jeff Galli <jeff.galli@teledyneflir.com>
Subject: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Hi Jeff, Attached is the quote for the split p-part bonding inserts for the 3 products for 1 machine. Let me know if you have any questions. If [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏
SO26201063
$ 21,150.00
Expires on 06/21/2026
Hi Jeff,
Attached is the quote for the split p-part bonding inserts for the 3 products for 1 machine. Let me know if you have any questions.
If you intend to move forward it would be best if you could send us boats and possibly some parts as well just to make sure clearance is not going to be an issue.
Chris
Christopher BergerPhone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
Turnpack — Efficiency Redefined Through Automation
Ok thank you. I can find the Besi cartoons from the design that I can share when we meet so we have something to base off of.
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Info at Turnpack <info@turnpack.com>
Sent: Friday, July 10, 2026 8:33 AM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
|
External Email |
Jeff,
I missed the email where you mentioned your production stopped. We'll ship it today for sure and we'll figure out the call later.
Chris
On Fri, Jul 10, 2026 at 8:28 AM Galli, Jeff (US) <Jeff.Galli@teledyne.com> wrote:
Hi Chris,
Are you available for a call today so it can be shipped today so we have it on Monday? I am available after 10am PST today.
Thanks,
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Info at Turnpack <info@turnpack.com>
Sent: Friday, July 10, 2026 8:24 AM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Hi Jeff,
I thought I sent an email yesterday but I may not have. We reviewed the bonding insert and definitely have some questions and need clarification. I was asking if we'd be able to jump on a call Monday and then send them back right after. If that's not possible I will drop them off today. Sorry for the communication gap, not sure what happened.
Chris
On Fri, Jul 10, 2026 at 8:07 AM Galli, Jeff (US) <Jeff.Galli@teledyne.com> wrote:
Good morning,
Can you please confirm if the PParts were shipped back to us?
Thank you,
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Galli, Jeff (US)
Sent: Thursday, July 9, 2026 10:44 AM
To: 'Lorena Carrillo' <lcarrillo@turnpack.com>
Cc: 'Keith Chalman' <keith@cti-rep.com>; 'Turnpack, LLC SO26201063' <catchall@turnpack.com>; 'Brandon Benavidez' <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Thanks Lorena. Sorry I didn’t send the label earlier this week but could you please make sure the PParts get shipped back today? We need them for production again.
Thank you!
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Thursday, July 9, 2026 9:42 AM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Cc: 'Keith Chalman' <keith@cti-rep.com>; 'Turnpack, LLC SO26201063' <catchall@turnpack.com>; 'Brandon Benavidez' <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Thank you yes this looks to be the same label. It is already back with production for when the shipment is ready.
From: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Sent: Thursday, July 9, 2026 8:13 AM
To: Info at Turnpack <info@turnpack.com>
Cc: Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Good morning,
Can you please use the attached label for shipping back the PParts today? Let me know if you have any questions about the parts or want to have a quick call this week or early next week.
Thank you!
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Info at Turnpack <info@turnpack.com>
Sent: Tuesday, June 30, 2026 9:58 PM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Cc: Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Hi Jeff! Thank you for the update. We do not use UPS only Fedex. Could you please either supply a fedex account or send a label we can use?
Respectfully,
Lorena Carrillo
On Tue, Jun 30, 2026, 9:32 PM Galli, Jeff (US) <Jeff.Galli@teledyne.com> wrote:
Hi All,
The parts went out today. Tracking number: 1Z8563AR0393655535.
I am out of office for the next week so you can have the parts for about a week. If you could please ship back the PParts by the beginning of next week that would be appreciated. The other components can be held onto. Please use UPS 8563AR to return the parts to my attention and the address in my signature. I will have some email if you have any questions or want to hop on a quick call.
Thanks!
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Keith Chalman <keith@cti-rep.com>
Sent: Tuesday, June 30, 2026 10:39 AM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>; Info at Turnpack <info@turnpack.com>
Cc: Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Hi Jeff,
Please send to:
Chris Berger
Turnpack
22425 S Scotland Ct, Suite 104
p: 480-648-4686
c: 480-273-4686
Let us know if there are further questions.
Best Regards,
Keith Chalman
President - Chalman Technologies
c (714) 412-5411
a 3150 E. La Palma Ave. Suite K, Anaheim, CA 92806
Manufacturer's Representative for:
(entire principal list at www.cti-rep.com)
From: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Sent: Tuesday, June 30, 2026 9:51 AM
To: Info at Turnpack <info@turnpack.com>; Keith Chalman <keith@cti-rep.com>
Cc: Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Can you confirm the address to ship the parts? I am trying to get them out today.
Thanks,
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Galli, Jeff (US)
Sent: Thursday, June 18, 2026 9:15 AM
To: Info at Turnpack <info@turnpack.com>; Keith Chalman <keith@cti-rep.com>
Cc: Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Good morning
Yes I have been getting some things ready. Trying to build ahead a bit so we can be down a set of pparts because all the ones we have we use weekly for production. Hoping to be able to send them all next week. The part we will need back within a week or so, the boats and parts can be kept for longer.
Sent from Workspace ONE Boxer
On Jun 17, 2026 4:18 PM, Keith Chalman <keith@cti-rep.com> wrote:
External Email
Hi Jeff,
I just wanted to check in to see if you've had a chance to get us the boats and p-parts question mark.
Let us know.
Keith
From: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Sent: Friday, June 5, 2026 7:57 AM
To: Info at Turnpack <info@turnpack.com>
Cc: Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Hi Chris,
Sounds good. I like the option for magnets or bolts if needed.
Good point about the ID axis. On the current systems there are two indexes because of the length of boats. We have a single index at the main but I know it has always been close.
I will work on getting some parts to sent out to you. I might have some older PParts that aren’t used for production that can be sent, otherwise we would need a quick turnaround on the PParts but the boats and other parts could be held on for longer. I’ll try to get those out next week.
If you have some preliminary designs to show I’d be interested in jumping on another quick call just to see them or if it would help clear up any other issues.
Thanks and hope you have a great weekend!
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Info at Turnpack <info@turnpack.com>
Sent: Thursday, June 4, 2026 4:24 PM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Cc: Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Hi Jeff,
Yes, the plan is to use magnets for the top plates instead of bolts. If you want we can use both magnets and bolts, leaving you the option of whether to use the bolts. The 3 boat designs you provided (Boson, BS8X and Tura) should all operate within the envelope of the machine. One item we flagged is that the center to center distance from the first to the last pocket is just under 12" of travel. Depending on the machine configuration with an ID axis the main axis travel can be limited to 10". Can you confirm that there are no existing travel issues with the boat designs you have provided?
What would be very helpful is to have a physical sample of each boat and part, along with the design files. Ideally, you could send us one p-part set for 1-day so we can review the existing design and prevent surprises.
If it makes sense we could jump on another 30min call to confirm a few things and walk through the models you provided.
Chris
On Tue, Jun 2, 2026 at 10:59 AM Galli, Jeff (US) <Jeff.Galli@teledyne.com> wrote:
Hi Keith and Chris,
For the PParts is it possible to have them in/out with magnets and not have to move the track once the base is set? Were you able to stop the boats in the correct position even with the change in the part and boat sizes? For the boson part we have 2 different board sizes (boats are the same), do you need to take a look at that board as well or we can copy the interface of the PPart we are using now?
If that all looks good I will probably go ahead and order. I’m thinking what we will need is:
1x ID Base
4x Main Base
4x Main insert – Boson
2x Main insert – Tura
2x Main insert - BosonHD
1x ID insert - BosonHD
Thanks,
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Keith Chalman <keith@cti-rep.com>
Sent: Monday, June 1, 2026 3:40 PM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Hi Jeff,
Just checking to see if you have any questions on that quote Chris sent? Attached again here.
Let us know.
Best Regards,
Keith Chalman
President - Chalman Technologies
c (714) 412-5411
a 3150 E. La Palma Ave. Suite K, Anaheim, CA 92806
Manufacturer's Representative for:
From: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Sent: Tuesday, May 26, 2026 6:52 PM
To: Turnpack, LLC SO26201063 <catchall@turnpack.com>; Keith Chalman <keith@cti-rep.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Hi Chris and Keith,
Thanks for the quote. I will review it and organize my thoughts a bit and let you know if I have any questions by the end of the week.
Hope you enjoyed your long weekend!
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: May 14-18
Teledyne Confidential; Commercially Sensitive Business Data
From: Chris Berger <info@turnpack.com>
Sent: Tuesday, May 26, 2026 7:23 AM
To: Jeff Galli <jeff.galli@teledyneflir.com>
Subject: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Hi Jeff, Attached is the quote for the split p-part bonding inserts for the 3 products for 1 machine. Let me know if you have any questions. If [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏
SO26201063
$ 21,150.00
Expires on 06/21/2026
Hi Jeff,
Attached is the quote for the split p-part bonding inserts for the 3 products for 1 machine. Let me know if you have any questions.
If you intend to move forward it would be best if you could send us boats and possibly some parts as well just to make sure clearance is not going to be an issue.
Chris
Christopher BergerPhone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
Turnpack — Efficiency Redefined Through Automation
Fwd: D4FR_10 RFQ
 |
Robby Glass General Manager (928) 303-4586 AS9100/ISO9001 Certified @harshco_waterjet @harshco_offroad 7442 E Butherus Drv, Scottsdale, AZ 85260
Please reference PO terms and conditions on www.harshcowaterjet.com If no tolerance is given standard tolerance for all parts is +-1/8"
|
|
|
Robby Glass General Manager (928) 303-4586
AS9100/ISO9001 Certified
@harshco_waterjet @harshco_offroad 7442 E Butherus Drv, Scottsdale, AZ 85260
Please reference PO terms and conditions on www.harshcowaterjet.com
If no tolerance is given standard tolerance for all parts is +-1/8"
|
 |
Hey Ivan,
The only other option would to be to order a .75" die insert for it which is kinda pricey, I could see how much it would cost and lead time if you'd like?
thanks,
Robby Glass General Manager
(928) 303-4586
AS9100/ISO9001 Certified
@harshco_waterjet @harshco_offroad
7442 E Butherus Drv, Scottsdale, AZ 85260
Please reference PO terms and conditions on www.harshcowaterjet.com
If no tolerance is given standard tolerance for all parts is +-1/8"
From: Ivan Arevalo <iarevalo@turnpack.com>
Sent: Thursday, July 9, 2026 3:19 PM
To: robby glass <robbyglass@harshco.com>
Subject: Re: D4FR_10 RFQHey Robby,
I just finished speakingto the engineer who created this, and he said that won't work. He stated that if you had it, a .75" die would work but I know you said .5" is your biggest. I can possibly send out a 1:1 scale of the bend on a paper if that helps? Otherwise, what else can we do?
On Thu, Jul 9, 2026 at 2:57 PM robby glass <robbyglass@harshco.com> wrote:
Hey Ivan,
We can make these bends, only problem is the radius, our biggest radius die is .5", would that work for these?
thanks,
Robby Glass General Manager
(928) 303-4586
AS9100/ISO9001 Certified
@harshco_waterjet @harshco_offroad
7442 E Butherus Drv, Scottsdale, AZ 85260
Please reference PO terms and conditions on www.harshcowaterjet.com
If no tolerance is given standard tolerance for all parts is +-1/8"
From: Ivan Arevalo <iarevalo@turnpack.com>
Sent: Thursday, July 9, 2026 2:54 PM
To: robby glass <robbyglass@harshco.com>
Cc: Info at Turnpack <info@turnpack.com>; Christopher Berger <cberger@turnpack.com>
Subject: D4FR_10 RFQHey Robby,
I need a quotation for a cover for one of our machines. It'll be made of aluminum and needs to be cut and then bent.
I've attached the STEP files and drawings for this. If you could let us know the possible turnaround time as well as the cost, it would be greatly appreciated. We just need one.
Also, the drawing may be updated with some revisions, nothing too significant, but we just need a turnaround time based on these current drawings for now.
Thanks for your help.
Best,
Ivan
Good morning,
Can you please confirm if the PParts were shipped back to us?
Thank you,
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Galli, Jeff (US)
Sent: Thursday, July 9, 2026 10:44 AM
To: 'Lorena Carrillo' <lcarrillo@turnpack.com>
Cc: 'Keith Chalman' <keith@cti-rep.com>; 'Turnpack, LLC SO26201063' <catchall@turnpack.com>; 'Brandon Benavidez' <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Thanks Lorena. Sorry I didn’t send the label earlier this week but could you please make sure the PParts get shipped back today? We need them for production again.
Thank you!
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Thursday, July 9, 2026 9:42 AM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Cc: 'Keith Chalman' <keith@cti-rep.com>; 'Turnpack, LLC SO26201063' <catchall@turnpack.com>; 'Brandon Benavidez' <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
|
External Email |
Thank you yes this looks to be the same label. It is already back with production for when the shipment is ready.
From: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Sent: Thursday, July 9, 2026 8:13 AM
To: Info at Turnpack <info@turnpack.com>
Cc: Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Good morning,
Can you please use the attached label for shipping back the PParts today? Let me know if you have any questions about the parts or want to have a quick call this week or early next week.
Thank you!
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Info at Turnpack <info@turnpack.com>
Sent: Tuesday, June 30, 2026 9:58 PM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Cc: Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
|
External Email |
Hi Jeff! Thank you for the update. We do not use UPS only Fedex. Could you please either supply a fedex account or send a label we can use?
Respectfully,
Lorena Carrillo
On Tue, Jun 30, 2026, 9:32 PM Galli, Jeff (US) <Jeff.Galli@teledyne.com> wrote:
Hi All,
The parts went out today. Tracking number: 1Z8563AR0393655535.
I am out of office for the next week so you can have the parts for about a week. If you could please ship back the PParts by the beginning of next week that would be appreciated. The other components can be held onto. Please use UPS 8563AR to return the parts to my attention and the address in my signature. I will have some email if you have any questions or want to hop on a quick call.
Thanks!
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Keith Chalman <keith@cti-rep.com>
Sent: Tuesday, June 30, 2026 10:39 AM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>; Info at Turnpack <info@turnpack.com>
Cc: Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Hi Jeff,
Please send to:
Chris Berger
Turnpack
22425 S Scotland Ct, Suite 104
p: 480-648-4686
c: 480-273-4686
Let us know if there are further questions.
Best Regards,
Keith Chalman
President - Chalman Technologies
c (714) 412-5411
a 3150 E. La Palma Ave. Suite K, Anaheim, CA 92806
Manufacturer's Representative for:
(entire principal list at www.cti-rep.com)
From: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Sent: Tuesday, June 30, 2026 9:51 AM
To: Info at Turnpack <info@turnpack.com>; Keith Chalman <keith@cti-rep.com>
Cc: Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Can you confirm the address to ship the parts? I am trying to get them out today.
Thanks,
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Galli, Jeff (US)
Sent: Thursday, June 18, 2026 9:15 AM
To: Info at Turnpack <info@turnpack.com>; Keith Chalman <keith@cti-rep.com>
Cc: Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Good morning
Yes I have been getting some things ready. Trying to build ahead a bit so we can be down a set of pparts because all the ones we have we use weekly for production. Hoping to be able to send them all next week. The part we will need back within a week or so, the boats and parts can be kept for longer.
Sent from Workspace ONE Boxer
On Jun 17, 2026 4:18 PM, Keith Chalman <keith@cti-rep.com> wrote:
External Email
Hi Jeff,
I just wanted to check in to see if you've had a chance to get us the boats and p-parts question mark.
Let us know.
Keith
From: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Sent: Friday, June 5, 2026 7:57 AM
To: Info at Turnpack <info@turnpack.com>
Cc: Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Hi Chris,
Sounds good. I like the option for magnets or bolts if needed.
Good point about the ID axis. On the current systems there are two indexes because of the length of boats. We have a single index at the main but I know it has always been close.
I will work on getting some parts to sent out to you. I might have some older PParts that aren’t used for production that can be sent, otherwise we would need a quick turnaround on the PParts but the boats and other parts could be held on for longer. I’ll try to get those out next week.
If you have some preliminary designs to show I’d be interested in jumping on another quick call just to see them or if it would help clear up any other issues.
Thanks and hope you have a great weekend!
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Info at Turnpack <info@turnpack.com>
Sent: Thursday, June 4, 2026 4:24 PM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Cc: Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Hi Jeff,
Yes, the plan is to use magnets for the top plates instead of bolts. If you want we can use both magnets and bolts, leaving you the option of whether to use the bolts. The 3 boat designs you provided (Boson, BS8X and Tura) should all operate within the envelope of the machine. One item we flagged is that the center to center distance from the first to the last pocket is just under 12" of travel. Depending on the machine configuration with an ID axis the main axis travel can be limited to 10". Can you confirm that there are no existing travel issues with the boat designs you have provided?
What would be very helpful is to have a physical sample of each boat and part, along with the design files. Ideally, you could send us one p-part set for 1-day so we can review the existing design and prevent surprises.
If it makes sense we could jump on another 30min call to confirm a few things and walk through the models you provided.
Chris
On Tue, Jun 2, 2026 at 10:59 AM Galli, Jeff (US) <Jeff.Galli@teledyne.com> wrote:
Hi Keith and Chris,
For the PParts is it possible to have them in/out with magnets and not have to move the track once the base is set? Were you able to stop the boats in the correct position even with the change in the part and boat sizes? For the boson part we have 2 different board sizes (boats are the same), do you need to take a look at that board as well or we can copy the interface of the PPart we are using now?
If that all looks good I will probably go ahead and order. I’m thinking what we will need is:
1x ID Base
4x Main Base
4x Main insert – Boson
2x Main insert – Tura
2x Main insert - BosonHD
1x ID insert - BosonHD
Thanks,
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Keith Chalman <keith@cti-rep.com>
Sent: Monday, June 1, 2026 3:40 PM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Hi Jeff,
Just checking to see if you have any questions on that quote Chris sent? Attached again here.
Let us know.
Best Regards,
Keith Chalman
President - Chalman Technologies
c (714) 412-5411
a 3150 E. La Palma Ave. Suite K, Anaheim, CA 92806
Manufacturer's Representative for:
From: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Sent: Tuesday, May 26, 2026 6:52 PM
To: Turnpack, LLC SO26201063 <catchall@turnpack.com>; Keith Chalman <keith@cti-rep.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Hi Chris and Keith,
Thanks for the quote. I will review it and organize my thoughts a bit and let you know if I have any questions by the end of the week.
Hope you enjoyed your long weekend!
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: May 14-18
Teledyne Confidential; Commercially Sensitive Business Data
From: Chris Berger <info@turnpack.com>
Sent: Tuesday, May 26, 2026 7:23 AM
To: Jeff Galli <jeff.galli@teledyneflir.com>
Subject: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Hi Jeff, Attached is the quote for the split p-part bonding inserts for the 3 products for 1 machine. Let me know if you have any questions. If [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏
SO26201063
$ 21,150.00
Expires on 06/21/2026
Hi Jeff,
Attached is the quote for the split p-part bonding inserts for the 3 products for 1 machine. Let me know if you have any questions.
If you intend to move forward it would be best if you could send us boats and possibly some parts as well just to make sure clearance is not going to be an issue.
Chris
Christopher BergerPhone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
Turnpack — Efficiency Redefined Through Automation
Informed Delivery
|
|||||||||||||||||||||||||||||||||
Please do not respond to this message. This email was sent from an unattended mailbox. This report was generated at approximately 3:41 PM CDT 07/10/2026.
