Archives
Info Inbox
info@turnpack.com
-
Beroepsopleidingen met toekomst 2026-2027
Professioneel Mentor worden?Aanvangskwalificatie:MBO 4 diploma in maatschappelijk werk of zorg / welzijn.Een professioneel mentor regelt de persoonlijke zorgtaken van mensen die deze verantwoordelijkheid zelf niet (meer) aankunnen en/of er zelf niet over kunnen beslissen. De mentor neemt deze zorgtaken uit handen.
Zet jij je graag in voor de hulpbehoevende en kwetsbare medemens? Behartig jij graag de belangen van mensen die zelf niet geheel in staat zijn om de regie te behouden? Ben je opmerkzaam, empathisch, flexibel en praktisch ingesteld? Dan is Professioneel Mentor zeker iets voor jou.Klik HIER voor meer informatieErkend mediator worden?Uw eigen praktijk met ondersteuning vanhet VCM-kenniscentrumDe Rechtspraak is overbelast en mede daardoor groeit de vraag naar mediators.Mediation is de snelste en de goedkoopste manier van conflictbemiddeling.Steeds meer mensen willen er met begeleiding van een erkend mediator samen goed uit komen.De beste, en al jarenlang de meest gekozen, mediators-opleiding met de hoogst haalbare erkenning van Nederland is de VCM opleiding tot Erkend Mediator.Klik HIER voor meer informatieInstituut voor Erkend Kort BeroepsonderwijsVCM Opleiders is een onafhankelijk en erkend instituut voor beroepsopleidingen en maakt van iedere cursist een professional. Dat doen we door uit te blinken in kwalitatief hoogstaande en geaccrediteerde opleidingen. Na het afronden van een VCM opleiding heeft u reële mogelijkheden om het beroep van uw keuze fulltime of parttime uit te oefenen.Levensexecuteur worden?Er is een toenemende vraag naar levensexecuteurs. Door de vergrijzing en de complexiteit van financiële en zorgzaken wordt de rol van de levensexecuteur steeds belangrijker, vooral om families en naasten te ontlasten en om ervoor te zorgen dat de wensen van de betrokkene worden gerespecteerd.
Als je het regelen van administratieve, financiële en andere wens- zorgtaken voor deze doelgroep als een dankbare en nuttige taak ziet, is dit een uitstekende kans om je te vestigen als zelfstandig Levensexecuteur. Dit kan zowel parttime als fulltime.Klik HIER voor meer informatie.Erkend Nalatenschapscoach worden?(PRIMEUR in Nederland)Uw eigen praktijk met ondersteuning vanhet VCM-kenniscentrumSteeds meer mensen willen reeds voor hun overlijden en in ieder geval bij overlijden de zaken rondom een erfenis goed geregeld hebben. Juist daarom is nalatenschapscoach voor mensen met de juiste aanvangskwalificatie een beroep met mogelijkheden voor nu en in de toekomst.Heeft u een hbo werk en/of denkniveau met werk- en levenservaring en wilt u (een gedeelte van) uw tijd met veel voldoening en op een goed betaalde manier besteden?Klik HIER voor meer informatieLeiderschap zorg en welzijnDe komende decennia is er een groeiende zorgvraag. Passende zorg vraagt om innoverende werkwijzen. Daarmee groeit ook de vraag naar gemotiveerde zorgmedewerkers die met passie, plezier en veel voldoening het werk doen. Hierbij spelen de volgende vraagstukken een belangrijke rol:- Hoe brengen we passende zorg in de praktijk?
- Hoe kunnen we medewerkers blijven stimuleren en motiveren?
- Hoe kunnen teams en de afdelingen op een positieve manier samenwerken?
- Hoe behouden we, ondanks een zekere werkdruk, een goede sfeer?
Goed leiderschap is hierbij een absolute must.Klik HIER voor meer informatieErkend Ondernemerscoach worden?Uw eigen praktijk met ondersteuning van
de Raad van OndernemersBent u zelfstandig ondernemer of bent u dat geweest? Werkt, of heeft u gewerkt als adviseur / accountant / consultant / coach / manager / bedrijfsleider of in een aanverwante functie? Wilt u (een gedeelte van) uw tijd met veel voldoening en op een goed betaalde manier besteden? Dan is ondernemerscoach zeker iets voor u.In Nederland en België zijn ruim 2,5 miljoen bedrijven gevestigd. Jaarlijks komen er zo’n 300.000 mensen bij die starten als ondernemer. Amper 50% van de starters bestaat na 5 jaren nog. Meestal is dit het gevolg van onvoldoende ondernemersvaardigheden.
Een ondernemerscoach begeleidt en ondersteunt startende en/of bestaande ondernemers bij deze noodzakelijke vaardigheden.
Klik HIER voor meer informatie.
by "Gerard van de Kerkhof | VCM Opleiders" <gerard@vcm-opleiders.nl> - 09:13 - 8 Oct 2026 -
Your Intel account has been deactivated
Your Intel account has been deactivated
This is an auto-generated message. Please DO NOT reply. 
Your account has been deactivated Dear Chris Berger, Your Intel account for info@turnpack.com has been deactivated due to inactivity. Please contact your Intel project administrator to reactivate your account. Need help? For technical assistance, or if you feel you have received this message in error, contact our support team. © 2026 Intel Corporation
Intel Corporation, 2200 Mission College Blvd., M/S RNB4-145, Santa Clara, CA 95054 USA
Intel | Privacy | Cookies | Trademarks⌀
by "Intel Account Registration" <iam.email.replies@intel.com> - 07:11 - 8 Oct 2026 -
[Preview] Report Domain: turnpack.com Submitter: enterprise.protection.outlook.com Report-ID: fded6de00f694602b6f075bae3731434
This is a DMARC aggregate report from Microsoft Corporation. For Emails received between 2026-10-06 00:00:00 UTC to 2026-10-07 00:00:00 UTC. div>
You're receiving this email because you have included your email address in the 'rua' tag of your DMARC record in DNS for turnpack.com. Please remove your email address from the 'rua' tag if you don't want to receive this email.Please do not respond to this e-mail. This mailbox is not monitored and you will not receive a response. For any feedback/suggestions, kindly mail to dmarcreportfeedback@microsoft.com.
Microsoft respects your privacy. Review our Online Services Privacy Statement.
One Microsoft Way, Redmond, WA, USA 98052. div >
by "DMARC Aggregate Report" <dmarcreport@microsoft.com> - 05:02 - 8 Oct 2026 -
Your Intel Corporation account verification code
Intel Corporation Account verification code To access Intel Corporation's apps and resources, please use the code below for account verification. The code will only work for 30 minutes. Account verification code: 29214883 If you didn't request a code, you can ignore this email. Privacy StatementMicrosoft Corporation, One Microsoft Way, Redmond, WA 98052
by "Intel Corporation (via Microsoft)" <account-security-noreply@accountprotection.microsoft.com> - 12:03 - 8 Oct 2026 -
RE: Turnpack, LLC Order (Ref PO26391933)
Hi Lorena,
We are pleased to confirm that we have received the payment for PO# PO26391933.
The current completion date for this order is 16 October 2026, and we will arrange the shipment on the same day.
A copy of the invoice and AWB will be provided to you once the shipment has been arranged. Thank you.
(SO20044398)
Thanks and Best Regards,
Joleen Loo
Customer Service Representative
Micro-Mechanics Pte Ltd
Tel: (65) 6746-8800 ext 103
CONFIDENTIAL NOTE:-
The information contained in this e‐mail is intended only for the use of the individual or entity named above and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this message in error, please immediately notify the sender and delete the mail.
From: Joleen Loo <jloo@micro-mechanics.com>
Sent: Monday, October 5, 2026 11:02 AM
To: Turnpack LLC <info@turnpack.com>; 'Turnpack, LLC PO26391933 (SQ20012807)' <catchall@turnpack.com>
Cc: MM Americas <mmamericas@micro-mechanics.com>
Subject: RE: Turnpack, LLC Order (Ref PO26391933)Hi Lorena,
Thank you for the confirmation. We just wanted to ensure that the information provided is correct on your end.
My colleagues will be sending you the PayPal invoice link shortly for your payment arrangement. Please let us know if you do not receive the link.
Please note that a PayPal account is not required to complete the transaction. Thank you.
(SO20044398)
Thanks and Best Regards,
Joleen Loo
Customer Service Representative
Micro-Mechanics Pte Ltd
Tel: (65) 6746-8800 ext 103
CONFIDENTIAL NOTE:-
The information contained in this e‐mail is intended only for the use of the individual or entity named above and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this message in error, please immediately notify the sender and delete the mail.
From: Turnpack LLC <info@turnpack.com>
Sent: Friday, October 2, 2026 1:26 AM
To: Joleen Loo <jloo@micro-mechanics.com>; 'Turnpack, LLC PO26391933 (SQ20012807)' <catchall@turnpack.com>
Cc: MM Americas <mmamericas@micro-mechanics.com>
Subject: RE: Turnpack, LLC Order (Ref PO26391933)WARNING: Do not click links or open attachments unless you recognize the source of the email and know the contents are safe.
Yes please follow instructions listed on the PO. I’m not sure the confusion?
Thank you for your time,
Lorena Carrillo
From: Joleen Loo <jloo@micro-mechanics.com>
Sent: Thursday, October 1, 2026 2:14 AM
To: Turnpack LLC <info@turnpack.com>; 'Turnpack, LLC PO26391933 (SQ20012807)' <catchall@turnpack.com>
Cc: MM Americas <mmamericas@micro-mechanics.com>
Subject: RE: Turnpack, LLC Order (Ref PO26391933)Hi Lorena,
Apologies for the repeated confirmation. To ensure that all shipment details are correct, we would like to kindly double-check the information with you before proceeding.
Please confirm whether the following details for PO# PO26391933 are correct:
-
Shipping Address (as stated in the PO):
Henkel Corporation, David Grimes
14000 Jamboree Rd
Irvine, CA 92606
United States
- FedEx Account #: 310620505 (as stated in the PO)
- 4.5% credit card processing fee of USD 185.40 has been added to the order.
Please check and confirm whether all the above details are correct so that we can proceed accordingly.
Looking forward to your confirmation. Thank you.
(SO20044398)
Thanks and Best Regards,
Joleen Loo
Customer Service Representative
Micro-Mechanics Pte Ltd
Tel: (65) 6746-8800 ext 103
CONFIDENTIAL NOTE:-
The information contained in this e‐mail is intended only for the use of the individual or entity named above and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this message in error, please immediately notify the sender and delete the mail.
From: Turnpack LLC <info@turnpack.com>
Sent: Wednesday, September 30, 2026 11:24 PM
To: Joleen Loo <jloo@micro-mechanics.com>; 'Turnpack, LLC PO26391933 (SQ20012807)' <catchall@turnpack.com>
Cc: MM Americas <mmamericas@micro-mechanics.com>
Subject: RE: Turnpack, LLC Order (Ref PO26391933)WARNING: Do not click links or open attachments unless you recognize the source of the email and know the contents are safe.
Please also be sure to ship on the fedex account provided on the PO.
Thank you for your time,
Lorena Carrillo
From: Turnpack LLC <info@turnpack.com>
Sent: Wednesday, September 30, 2026 8:23 AM
To: 'Joleen Loo' <jloo@micro-mechanics.com>; 'Turnpack, LLC PO26391933 (SQ20012807)' <catchall@turnpack.com>
Cc: 'MM Americas' <mmamericas@micro-mechanics.com>
Subject: RE: Turnpack, LLC Order (Ref PO26391933)Thank you I have added the fees to the PO. Please drop ship to our client per instruction on the PO this is not shipping to us.
Thank you for your time,
Lorena Carrillo
From: Joleen Loo <jloo@micro-mechanics.com>
Sent: Wednesday, September 30, 2026 1:57 AM
To: Turnpack, LLC PO26391933 (SQ20012807) <catchall@turnpack.com>; info@turnpack.com
Cc: MM Americas <mmamericas@micro-mechanics.com>
Subject: RE: Turnpack, LLC Order (Ref PO26391933)Hi Lorena,
We have received PO# 26391933, and the order is currently being processed.
We understand that you would like to make payment via credit card for this order. Please note that a USD 185.40 processing fee (4.5%) has been added to the order.
Before we provide the PayPal invoice link for your payment arrangement, we noticed that your email mentioned a change to the billing and shipping address effective July 2026, as follows:
6922 E Via Northgate
Ste 101
Mesa, AZ 85212Could you please confirm whether there has been a change to the billing and shipping addresses?
The attached PO still reflects the previous address:
HENKEL CORPORATION
14000 JAMBOREE RD
IRVINE, CA 92606
USAHowever, we have received the certificate confirming the change of address.
Please confirm which address we should use for PO# 26391933 before we proceed with the payment arrangement. Thank you.
(SO20044398)
Thanks and Best Regards,
Joleen Loo
Customer Service Representative
Micro-Mechanics Pte Ltd
Tel: (65) 6746-8800 ext 103
CONFIDENTIAL NOTE:-
The information contained in this e‐mail is intended only for the use of the individual or entity named above and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this message in error, please immediately notify the sender and delete the mail.
From: Lorena Carrillo <info@turnpack.com>
Sent: Wednesday, September 30, 2026 6:10 AM
To: MM Americas <mmamericas@micro-mechanics.com>
Subject: Turnpack, LLC Order (Ref PO26391933)WARNING: Do not click links or open attachments unless you recognize the source of the email and know the contents are safe.
Dear Inggrid Tan (Micro-Mechanics) Please find attached purchase order PO26391933 with reference: SQ20012807 amounting in $ 4,120.00 from [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏

PO26391933
$ 4,120.00 due 9/29/26
Dear Inggrid Tan (Micro-Mechanics)
Please find attached purchase order PO26391933 with reference: SQ20012807 amounting in $ 4,120.00 from Turnpack, LLC as well as the resale certificate, for your review and action.
The receipt is expected for 09/29/2026, if this date is not achievable, please reply with an available date for reconsideration.
**Please acknowledge the receipt of this order and confirm lead time at your earliest convenience.
NOTE!! NEW BILLING/SHIPPING ADDRESS AS OF JULY 2026
6922 E Via Northgate
Ste 101
Mesa, AZ 85212Turnpack — Efficiency Redefined Through Automation
by "Joleen Loo" <jloo@micro-mechanics.com> - 11:01 - 7 Oct 2026 -
Shipping Address (as stated in the PO):
-
Remittance Information from Intuitive Surgical
New Zix secure email message from Wells Fargo Do not reply to this notification message; this message was auto-generated by the sender's security system.
Open Message From the Register Account Page:
a) Enter your email address if not already shown,
b) Create a passphrase for the secure email site and click Register.To view the secure message or reply to the sender, click Open Message.
The secure message expires on Nov 07, 2026 @ 01:34 AM (GMT).
For assistance, review the support site.
This message may contain confidential and/or privileged information. If you are not the addressee or authorized to receive this for the addressee, you must not use, copy, disclose, or take any action based on this message or any information herein. If you have received this message in error, please advise the sender immediately by reply e-mail and delete this message. Do not include confidential or sensitive information in your reply to this notification as it will not be encrypted. Thank you for your cooperation.
by "paymentremittanceinformation wellsfargo.com" <paymentremittanceinformation@wellsfargo.com> - 08:37 - 7 Oct 2026 -
Second Chance Picks + Trending Items for You, Friend
🧠 We Picked These Just for You FriendFresh picks based on your past bids and browsing. Jump back in there → Log In to My Account
Auction My Account Help Desk
ITEMS WON 0 SAVINGS VS RETAIL $ AVERAGE % OFF 0%
No-Hassle Returns:
If it’s not right, return it within 7 days for a full refund.
No penalties, no stress.Need help? Visit our Help Desk anytime.
Auction My Account Help Desk Watn to change how you receive these emails? You can Update Your Preferences or Unsubscribe © Copyright 2025 nellisauction.com. All Rights Reserved.
by "Nellis Auction" <nelli@nellisauction.com> - 07:47 - 7 Oct 2026 -
Re: Turnpack, LLC Order (Ref PO26351907)
Please see the attached PO with the modified Expedite fee.
Thank you,Samantha
From: Robert Sanchez <robert.sanchez@heitek.com>
Sent: Tuesday, October 6, 2026 2:59 PM
To: Zack Ruffing <zachary.ruffing@heitek.com>; Samantha Roman <sroman@turnpack.com>; Turnpack, LLC PO26351907 (2378161) <catchall@turnpack.com>
Cc: Christopher Berger <cberger@turnpack.com>
Subject: RE: Turnpack, LLC Order (Ref PO26351907)Hello,
These would be the components that would be expedited with lead time and cost.
p/n 1598242
standard 4 weeks
express 2 weeks and then 3 days to ship after $70.00
p/n 1608056
standard 3 weeks
express 3 business days for $70.00
p/n 1603604
standard 3 weeks
express 3 business days for $70.00
Total for expedite would be $210, I would need to update order if you would like to proceed.
Please advise.
ROBERT SANCHEZ | Customer Care
P: 602.730.8517
Heitek Automation · a SunSource Company · www.heitek.com · Request a Quote · Line Card
From: Zack Ruffing <zachary.ruffing@heitek.com>
Sent: Tuesday, October 6, 2026 11:19 AM
To: Robert Sanchez <robert.sanchez@heitek.com>; Samantha Roman <sroman@turnpack.com>; Turnpack, LLC PO26351907 (2378161) <catchall@turnpack.com>
Cc: Christopher Berger <cberger@turnpack.com>
Subject: Re: Turnpack, LLC Order (Ref PO26351907)@Robert Sanchez - Ask purchasing to go after this answer for us.
Thank you for your help!
ZACK RUFFING | Business Development Manager
P: 480.997.0878
Heitek Automation · a SunSource Company · www.heitek.com · Request a Quote · Line Card
From: Robert Sanchez <robert.sanchez@heitek.com>
Sent: Monday, October 5, 2026 4:16 PM
To: Samantha Roman <sroman@turnpack.com>; Zack Ruffing <zachary.ruffing@heitek.com>; Turnpack, LLC PO26351907 (2378161) <catchall@turnpack.com>
Cc: Christopher Berger <cberger@turnpack.com>
Subject: RE: Turnpack, LLC Order (Ref PO26351907)Hello,
Waiting to hear back from supplier.
Thank you.
ROBERT SANCHEZ | Customer Care
P: 602.730.8517
Heitek Automation · a SunSource Company · www.heitek.com · Request a Quote · Line Card
From: Samantha Roman <sroman@turnpack.com>
Sent: Friday, October 2, 2026 12:36 PM
To: Robert Sanchez <robert.sanchez@heitek.com>; Zack Ruffing <zachary.ruffing@heitek.com>; Turnpack, LLC PO26351907 (2378161) <catchall@turnpack.com>
Cc: Christopher Berger <cberger@turnpack.com>
Subject: Re: Turnpack, LLC Order (Ref PO26351907)EXTERNAL EMAIL: This email originated from outside the organization. Do not click links or open attachments unless you recognize the sender and trust the content.
Thank you Robert,
What does the expedite fee cover? Is there potential to improve that 3 weeks?
Sam
From: Robert Sanchez <robert.sanchez@heitek.com>
Sent: Friday, October 2, 2026 9:22 AM
To: Samantha Roman <sroman@turnpack.com>; Zack Ruffing <zachary.ruffing@heitek.com>; Turnpack, LLC PO26351907 (2378161) <catchall@turnpack.com>
Cc: Christopher Berger <cberger@turnpack.com>
Subject: RE: Turnpack, LLC Order (Ref PO26351907)Hello,
Attached is your order acknowledgement. Please review and let me know if you have any questions.
Please note that lead time is 3 weeks + transit time.
Thank you.
ROBERT SANCHEZ | Customer Care
P: 602.730.8517
Heitek Automation · a SunSource Company · www.heitek.com · Request a Quote · Line Card
From: Samantha Roman <sroman@turnpack.com>
Sent: Thursday, October 1, 2026 4:42 PM
To: Zack Ruffing <zachary.ruffing@heitek.com>; Turnpack, LLC PO26351907 (2378161) <catchall@turnpack.com>
Cc: Christopher Berger <cberger@turnpack.com>; Robert Sanchez <robert.sanchez@heitek.com>
Subject: Re: Turnpack, LLC Order (Ref PO26351907)EXTERNAL EMAIL: This email originated from outside the organization. Do not click links or open attachments unless you recognize the sender and trust the content.
Thank you, I put the date as need by 10/15 . If we can improve, please do so.
From: Zack Ruffing <zachary.ruffing@heitek.com>
Sent: Thursday, October 1, 2026 4:39 PM
To: Turnpack, LLC PO26351907 (2378161) <catchall@turnpack.com>
Cc: Samantha Roman <sroman@turnpack.com>; Christopher Berger <cberger@turnpack.com>; Robert Sanchez <robert.sanchez@heitek.com>
Subject: RE: Turnpack, LLC Order (Ref PO26351907)I forwarded to Robert. He is going to process this ASAP. Lead time to come.
ZACK RUFFING | Business Development Manager
P: 480.997.0878
Heitek Automation · a SunSource Company · www.heitek.com · Request a Quote · Line Card
From: Lorena Carrillo <info@turnpack.com>
Sent: Thursday, October 1, 2026 4:34 PM
To: Zack Ruffing <zachary.ruffing@heitek.com>; Zack Ruffing <zachary.ruffing@heitek.com>
Subject: Turnpack, LLC Order (Ref PO26351907)EXTERNAL EMAIL: This email originated from outside the organization. Do not click links or open attachments unless you recognize the sender and trust the content.
Dear Customer Care (Heitek Automation) Please find attached purchase order PO26351907 with reference: 2378161 amounting in $ 10,920.40 from [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏

PO26351907
$ 10,920.40 due 10/1/26
Dear Customer Care (Heitek Automation)
Please find attached purchase order PO26351907 with reference: 2378161 amounting in $ 10,920.40 from Turnpack, LLC as well as the resale certificate, for your review and action.
The receipt is expected for 10/16/2026, if this date is not achievable, please reply with an available date for reconsideration.
**Please acknowledge the receipt of this order and confirm lead time at your earliest convenience.
NOTE!! NEW BILLING/SHIPPING ADDRESS AS OF JULY 2026
6922 E Via Northgate
Ste 101
Mesa, AZ 85212Turnpack — Efficiency Redefined Through Automation
Disclaimer
This message (including any attachments) is intended only for the use of the individual or entity to which it is addressed and may contain information that is non-public, proprietary, privileged, confidential, and exempt from disclosure under applicable law or may constitute as attorney work product. If you are not the intended recipient, you are hereby notified that any use, dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, notify us immediately by telephone and (i) destroy this message if a facsimile or (ii) delete this message immediately if this is an electronic communication. Thank you.
by Samantha Roman - 07:22 - 7 Oct 2026 -
Receipt for Your Order PO26351909
ReceiptBilled toTURNPACK LLC
6922 E VIA NORTHGATE STE 101
MESA AZ 85212Purchase Order PO26351909 Paid $76.55 Invoice 71273969 Invoice Date 9/2/26 Shipped toTurnpack LLC
6922 E Via Northgate Ste 101
Mesa AZ 85212Information About Your Payment Credit CardDateName on CardAmex Ending- 100410/7/26Turnpack LLCYour Account 438808000 Christopher Berger placed this order.Line Product Ordered Shipped Balance Price Total 1 2044T131 Black End Caps for 1.2" and 1.21" ID Round Cut-to-Length Shipping Tube, Packs of 25 2 Packs2 0 11.64 Per Pack23.28 2 2044T353 Round Cut-to-Length Shipping Tube, 1.2" ID, 48" Inside Length 5 Each5 0 3.85 Each19.25 Merchandise 42.53 Shipping 34.02 Total $76.55 Payment Received 10/7/26 (76.55) Balance Due $0.00 Packing List Shipped Weight Carrier Tracking 5036366-01 09/02/2026 2 lb UPS 1Z9293810105758827 Received by Turnpack 9/3/26. 5036366-02 09/02/2026 3 lb UPS 1Z9293810105758836 Received by Turnpack 9/3/26. Federal ID 36-1458720
by "McMaster-Carr" <invoice.reply@mcmaster.com> - 06:21 - 7 Oct 2026 -
Receipt for Your Order PO26331889
ReceiptBilled toTURNPACK LLC
6922 E VIA NORTHGATE STE 101
MESA AZ 85212Purchase Order PO26331889 Paid $199.37 Invoice 70503989 Invoice Date 8/20/26 Shipped toTurnpack LLC
6922 E Via Northgate Ste 101
Mesa AZ 85212Information About Your Payment Credit CardDateName on CardAmex Ending- 100410/7/26Turnpack LLCYour Account 438808000 Christopher Berger placed this order.Line Product Ordered Shipped Balance Price Total 1 92125A281 18-8 Stainless Steel Hex-Drive Flat Head Screw, M8 x 1.25 mm Thread Size, 14 mm Long, Packs of 25 1 Pack1 0 16.17 Per Pack16.17 2 92125A052 18-8 Stainless Steel Hex-Drive Flat Head Screw, M2 x 0.4 mm Thread Size, 6 mm Long, Packs of 50 17 Packs17 0 9.60 Per Pack163.20 3 9262K519 Oil-Resistant Buna-N O-Ring, 1.5 mm Wide, 5.5 mm ID, Packs of 100 1 Pack1 0 7.69 Per Pack7.69 Merchandise 187.06 Shipping 12.31 Total $199.37 Payment Received 10/7/26 (199.37) Balance Due $0.00 Packing List Shipped Weight Carrier Tracking 4369609-01 08/20/2026 2 lb UPS 1Z9293810105193008 Received by Evon 8/21/26. Federal ID 36-1458720
by "McMaster-Carr" <invoice.reply@mcmaster.com> - 06:21 - 7 Oct 2026 -
Receipt for Your Order PO26331887
ReceiptBilled toTURNPACK LLC
6922 E VIA NORTHGATE STE 101
MESA AZ 85212Purchase Order PO26331887 Paid $711.59 Invoice 70358677 Invoice Date 8/18/26 Shipped toTurnpack LLC
6922 E Via Northgate Ste 101
Mesa AZ 85212Information About Your Payment Credit CardDateName on CardAmex Ending- 100410/7/26Turnpack LLCYour Account 438808000 Christopher Berger placed this order.Line Product Ordered Shipped Balance Price Total 1 8885K862 High-Strength 7075 Aluminum Sheet, 1/8" Thick, 6" x 12" 1 Each1 0 23.02 Each23.02 2 9055K45 High-Strength 7075 Aluminum Bar, 1/2" Thick x 3" Wide, 2 Feet Long 1 Each1 0 185.56 Each185.56 3 9055K47 High-Strength 7075 Aluminum Bar, 1" Thick x 1" Wide, 3 Feet Long 1 Each1 0 126.95 Each126.95 4 5805T11 Clear Slippery High-Temperature FEP Film with Adhesive-Back, 12" x 12" x 0.0035" 1 Each1 0 23.41 Each23.41 5 5225K559 Push-to-Connect Tube Fitting for Air, Adapter, for 4 mm Tube OD, M3 x 0.5 mm Male Pipe 7 Each7 0 8.50 Each59.50 6 97310A127 Oversized Washer, 18-8 Stainless Steel, for M3 Screw Size, 9mm OD, 0.9mm to 1.1mm Thick, Packs of 100 1 Pack1 0 5.14 Per Pack5.14 7 4402K61 Corrosion-Resistant Muffler, M3 Thread Male 316 Stainless Steel Fitting 3 Each3 0 26.66 Each79.98 8 5225K781 Push-to-Connect Tube Fitting for Air, Long 90 Degree Elbow, for 4 mm Tube OD, M5 x 0.8 mm Male 9 Each9 0 9.12 Each82.08 9 5225K739 Push-to-Connect Tube Fitting for Air, 90 Degree Swivel Elbow, for 4mm Tube OD, M3 x 0.5mm Male 9 Each9 0 9.75 Each87.75 Merchandise 673.39 Shipping 38.20 Total $711.59 Payment Received 10/7/26 (711.59) Balance Due $0.00 Packing List Shipped Weight Carrier Tracking 4220822-02 08/18/2026 8 lb UPS 1Z9293810105075850 Received by George 8/19/26. 4220822-03 08/18/2026 6 lb UPS 1Z9293810105075869 Received by George 8/19/26. Federal ID 36-1458720
by "McMaster-Carr" <invoice.reply@mcmaster.com> - 06:21 - 7 Oct 2026 -
Receipt for Your Order PO26331887
ReceiptBilled toTURNPACK LLC
6922 E VIA NORTHGATE STE 101
MESA AZ 85212Purchase Order PO26331887 Paid $56.46 Invoice 70419632 Invoice Date 8/19/26 Shipped toTurnpack LLC
6922 E Via Northgate Ste 101
Mesa AZ 85212Information About Your Payment Credit CardDateName on CardAmex Ending- 100410/7/26Turnpack LLCYour Account 438808000 Christopher Berger placed this order.Line Product Ordered Shipped Balance Price Total 10 50315K69 Firm Polyurethane Rubber Tubing for Air&water 4 mm ID, 6 mm OD, Clear Blue, 100 ft. Length 1 Each1 0 54.00 Each54.00 Merchandise 54.00 Shipping 2.46 Total $56.46 Payment Received 10/7/26 (56.46) Balance Due $0.00 Packing List Shipped Weight Carrier Tracking 4220822-01 08/19/2026 3 lb UPS 1Z6028360197453705 Received by Evon 8/20/26. Federal ID 36-1458720
by "McMaster-Carr" <invoice.reply@mcmaster.com> - 06:21 - 7 Oct 2026 -
Receipt for Your Order PO26331889
ReceiptBilled toTURNPACK LLC
6922 E VIA NORTHGATE STE 101
MESA AZ 85212Purchase Order PO26331889 Paid $95.19 Invoice 70530768 Invoice Date 8/20/26 Shipped toTurnpack LLC
6922 E Via Northgate Ste 101
Mesa AZ 85212Information About Your Payment Credit CardDateName on CardAmex Ending- 100410/7/26Turnpack LLCYour Account 438808000 Christopher Berger placed this order.Line Product Ordered Shipped Balance Price Total 1 31705K641 Pressure Recording Film, 10-5/8" Long x 12" Wide x 0.007" Thick, 70 to 350 PSI 1 Each1 0 82.88 Each82.88 NotesChristopher Berger changed the purchase order number from 0820CBERGER to PO26331889 on August 20th.Merchandise 82.88 Shipping 12.31 Total $95.19 Payment Received 10/7/26 (95.19) Balance Due $0.00 Packing List Shipped Weight Carrier Tracking 4365273-01 08/20/2026 2 lb UPS 1Z9293810105181637 Received by Evon 8/21/26. Federal ID 36-1458720
by "McMaster-Carr" <invoice.reply@mcmaster.com> - 06:21 - 7 Oct 2026 -
50GB Priority Data Added
You'll continue to receive high-speed service.
50GB Priority Data Added
You’re opted in to automatic top-ups, so we’ve added 50 of Priority Data. This ensures you continue to receive high-speed service without interruption.
Account Number ACC-DF-14516124-70534-39 Service Line Number SL-DF-14214845-37013-99 Current Limit (GB) 1050 Current Usage (GB) 1000 Automatic Top-Up (GB) 50 Top-Up Price $25.00 My Account
This message was sent to info@turnpack.com for account ACC-DF-14516124-70534-39.
Space Exploration Technologies Corp | 1 Rocket Road, Hawthorne, CA 90250
by "Starlink" <no-reply@starlink.com> - 03:37 - 7 Oct 2026 -
FedEx Billing Online Payment Reference 59748063


FedEx payment scheduled. Log in to review. 



Payment Scheduled 


Dear christopher berger, 
An automatic payment has been scheduled for your FedEx account number ending in 6805 using payment profile TURNPACK PLATINUM.Log in to FedEx® Billing Online to review the invoices included in this payment. 
Invoice Number Amount 9-493-13853 107.92 USD 

Log in 

Thank you for your business, FedEx 



©2026 FedEx. The content of this message is protected by copyright and trademark laws under U.S. and international law.
Review our privacy policy. All rights reserved.
This message has been sent by an auto responder system. Please do not reply to this message.
by "BillingOnline" <BillingOnline@fedex.com> - 03:18 - 7 Oct 2026 -
Queen Creek, say hi to a great deal on Mobile
FREE Mobile service for loyal customers͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ FREE Mobile service for loyal customers. View in browser

866‑834‑1467
Call now 
AI-generated images and models shown. Queen Creek,
Say hi to a great deal on MobileWith your current Business Internet service, you can get one line of Spectrum Mobile® FREE for 12 months. Enjoy savings that matter on reliable mobile service that keeps you connected without limits, at no extra cost. Business Internet and EasyPay required. or explore Mobile Get mobile service built for small business
Real savings for your bottom line • No contracts or hidden taxes • Save up to thousands of dollars with multi-line savings on 4+ lines • Phone Balance Buyout on up to 20 lines for up to $10K total or explore Mobile 
More value at no extra cost • Unlimited talk, text and data • Nationwide 5G and mobile hotspot data included • International texting from the US and while abroad Call 866‑834‑1467 or explore Mobile
Limited-time offer; subject to change. Qualified Spectrum Business customers only (no outstanding Spectrum balance). Standard rates apply after promo period or service change. +$10/mo without EasyPay; +$5/mo for paper bills. Actual speeds (including wireless) vary and are not guaranteed. Activation fee additional; taxes and charges may apply. Installation fees are extra. FREE UNLIMITED MOBILE LINE applies to the first line only, with up to 12 months of bill credits. Devices not included; smartwatches and tablets don’t qualify. After 30GB of cellular data, speeds may slow during times of high demand; after 10GB of hotspot data, speeds reduced. Customers with four or more lines are not eligible. TO ACCESS 5G: 5G compatible phone and 5G service required. Not all 5G capable phones compatible with all 5G service. Speeds may vary. SPECTRUM BUSINESS PHONE BALANCE REIMBURSEMENT: 2–20 lines or $10,000 max/account. Covers remaining device balances for ported lines in good standing (90+ days); proof required. Excludes tablets and wearables. Limit one per account; restrictions apply. See spectrumbusiness.net/PBB for details. Terms and conditions apply, subject to change. Not available in all areas. Spectrum Business Internet and EasyPay required for Mobile service. Restrictions apply.
Unsubscribe | Privacy Policy | Manage Your Preferences
This message was sent by Spectrum Business, a brand of Charter Communications. Parts of this message may contain promotional information about Spectrum Business and its services. Please do not reply to this email as this email address is not monitored.
© 2026 Charter Communications, all rights reserved | 12405 Powerscourt Drive, St Louis, MO 63131
100726-EM-C
by "Cox is now Spectrum" <Cox@businesscontact.cox.com> - 02:48 - 7 Oct 2026 -
Delivered on Order PO 26402215: Rounded Head Screws
We delivered the rounded head screws on order PO 26402215 (received by Turnpack).
by "McMaster-Carr" <la.sales@mcmaster.com> - 12:33 - 7 Oct 2026 -
Delivered on Order PO26402208: Aluminum and Flat Head Screws
We delivered the aluminum and flat head screws on order PO26402208 (received by Turnpack).
by "McMaster-Carr" <la.sales@mcmaster.com> - 12:33 - 7 Oct 2026 -
Re: Turnpack - Camera Solutions for Robotic Automation & Inspection
Hi Team,
Are you receiving our emails?
Awaiting your response.
Regards,Margaret BensonVadzo Imaging
From: Margaret Benson <margaret@vadzo-usa.net>
Sent: Monday, October 5, 2026 10:30 PM
To: info@turnpack.com <info@turnpack.com>
Subject: Re: Turnpack - Camera Solutions for Robotic Automation & InspectionHi Team,
Have you had any chance to go through the below email?
Looking forward to your response.
Regards,
Margaret Benson
Vadzo Imaging
From: Margaret Benson <margaret@vadzo-usa.net>
Sent: Tuesday, September 29, 2026 7:48 PM
To: info@turnpack.com <info@turnpack.com>
Subject: Turnpack - Camera Solutions for Robotic Automation & InspectionHi Team,
I came across Turnpack and noticed your work in custom robotic automation, edge-AI inspection, and precision equipment.
At Vadzo Imaging, we provide off-the-shelf and custom camera, optics, enclosure, and firmware solutions for OEM applications.
Our camera solutions can be configured with:
- 2MP–20MP resolutions, including global shutter and high-FPS options- Monochrome, color, and RAW Bayer camera solutions- USB, MIPI, GigE/PoE, Wi-Fi and FPD-Link III/IV (SerDes) interfaces- Dynamic ROI, ultra-low latency, HDR/WDR, NIR, autofocus, and multi-camera synchronization- Customized camera enclosures with integrated lens options- Windows, Linux and Android support with C/C++ and Python SDKs- OEM customization for hardware, optics, and firmware
If your team is evaluating cameras for robotic automation or inspection equipment, we'd be happy to discuss your requirements.
Evaluation units are available for testing.
Would you be available for a 15-minute Teams meeting?
Looking forward to hearing your thoughts.
Best regards,Margaret BensonConsultant – Camera SolutionsVadzo Imaging
by "Margaret Benson" <margaret@vadzo-usa.net> - 12:03 - 7 Oct 2026 -
Re: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667
Chris,We really need some information on this machine as it is critical for our process. Please help us understand delivery timeline ASAP.
Get Outlook for iOS
From: Castillo, Ricardo - MX <Ricardo.Castillo@am.spectrumcontrol.com>
Sent: Wednesday, 07 October 2026 10:55:32
To: Christopher Berger <cberger@turnpack.com>; info@turnpack.com <info@turnpack.com>; catchall@turnpack.com <catchall@turnpack.com>
Cc: Heredia, Roman - MX <Roman.Heredia@am.spectrumcontrol.com>; Langford, Nathan - US <Nathan.Langford@am.spectrumcontrol.com>
Subject: RE: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667Hi Chris
We have sent multiple inquiries over the past few months regarding the shipping status of our equipment but have not received a timeline. Don’t really know what is causing the delay for months.
Could you please take the time to provide a firm date of delivery?
Thank you
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, July 22, 2026 1:53 PM
To: Rodarte, Federico - MEX; Sosa, Rosa - MX
Cc: Castillo, Ricardo - MX; Ortega, Estela - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX; Velazquez, Kevin - MEX; info@turnpack.com; catchall@turnpack.com
Subject: RE: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Federico,
Yes, I am receiving your emails. I owe you an explanation and an apology.
I replied on Tuesday, July 21 confirming the shipment and install plan. I have since found that reply sitting in our own internal inbox - I hit reply on an internal copy of your message instead of the original, so it never left our system. That is on me. I also owe Rosa an answer from June 26 that I never sent, and I owe you the flight itinerary I promised. All of that is addressed below.
BUILD STATUS
The antistatic lid - the last outstanding hardware item - has been received and installed. The machine is complete. Remaining work is final functional testing before crating.
SCHEDULE
We are targeting shipment to WTS in El Paso by the end of this week, Friday, July 24. Being straight with you: there is a realistic chance it slips to Monday or Tuesday, July 27-28.
I am holding the week of July 27 to be on-site in Juarez for installation, commissioning, and operator training, with the week of August 3 as the fallback if the crate does not clear in time. I will send my flight itinerary as soon as the ship date is locked, and no later than Friday, July 24.
CUSTOMS DOCUMENTATION - ROSA
Rosa, on June 26 you asked for certificate of origin, value, and technical data sheet. That request went unanswered for far too long and I apologize. Attached:- Certificate of Origin (USMCA / T-MEC certification format)
- Commercial invoice showing declared value
- D5L6 Technical Data Sheet
Two things I need back from you to complete the certification of origin:- Spectrum Control de Mexico's RFC and registered address, for the importer block
- Confirmation of the 6-digit HS tariff classification your broker uses for this equipment
Please also tell me if your broker needs anything beyond these three documents. Since you noted clearance typically runs about two days with documents in hand, I want everything in your possession before the crate arrives at WTS rather than after.
SHIPMENT DETAILS
Shipping to your broker warehouse as previously confirmed:
Spectrum Control, De Mexico
C/O WTS Corporation Inc.
9540 Joe Rodriguez
El Paso, TX 79927
Crate dimensions and gross weight: TBD
The machine is 141 lbs and is a two-person lift, so no forklift is required once the crate is open.
Two asks so we can lock my on-site days precisely:- Confirm WTS receiving hours and whether they need advance notice of delivery
- Once it crosses, tell me the date it lands in Juarez. If it clears faster than expected I will move my trip up rather than have the machine sit.
INSTALLATION AND TRAINING - WHAT WE NEED FROM YOUR SIDE
Federico, you asked about this on June 22 and I did not answer it properly. The attached site preparation sheet has the full detail. The essentials:- Power: 110 V, 60 Hz, single phase, standard NEMA 5-15 outlet within reach of the rear panel. Your facility supply works as-is; no transformer or adapter is required. Please use a circuit separate from sensitive instrumentation, as the machine cycles motors frequently.
- Bench: solid, level, non-vibrating, rated 250 lbs or more
- Machine footprint: 24 in W x 22 in D x 14 in H
- Clear work area: roughly 30 in W x 24 in D x 26 in H, with room to rotate the machine for rear access
- ESD ground point at the bench, plus bench space for the particle-control vacuum unit
- In or adjacent to a microelectronics clean room; ambient at or below 40 C and 90 percent RH
No compressed air, nitrogen, or water is required - this is a dry process. No vent or exhaust either; the particle-control vacuum is a self-contained ULPA-filtered unit.
Plan on one to two days on site: uncrating and placement, power-up and commissioning, recipe setup on your parts, operator training on the new touchscreen interface, and basic maintenance and troubleshooting.
Please have ready:
- The operators and maintenance technicians who should attend, so we can schedule around your production
- Sample devices for process validation - at least two of each package type you intend to run
Please complete and return the site preparation sheet at your earliest convenience.
GOING FORWARD
Every update from me goes to this full distribution. If you do not hear back from me within one business day, call my cell at +1 (480) 273-4686 and I will pick up.
Ship date and itinerary to you by Friday.
Chris
Christopher Berger
Turnpack, LLC
Office: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | https://www.google.com/url?q=http://www.turnpack.com&source=gmail&ust=1784836118280000&sa=E
6922 E Via Northgate, Suite 2, Mesa, AZ 85212On Wed, Jul 22, 2026 10:44 AM, "Rodarte, Federico - MEX" <Federico.Rodarte@am.spectrumcontrol.com> wrote:
Hi Christopher, good morning.
Are you receiving my E-mails?
Please confirm.
Thanks
From: Rodarte, Federico - MEX
Sent: Monday, July 20, 2026 7:05 AM
To: Christopher Berger
Cc: Info at Turnpack; LLC SO2524915 Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX; Velazquez, Kevin - MEX; Sosa, Rosa - MX
Subject: RE: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667Hi Christopher, good morning, can you please update and share status?
Thanks.
From: Rodarte, Federico - MEX
Sent: Monday, July 13, 2026 7:27 AM
To: Sosa, Rosa - MX; Christopher Berger
Cc: Info at Turnpack; LLC SO2524915 Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX; Velazquez, Kevin - MEX
Subject: RE: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667Hi Christopher, good morning, can you please update and share status?
Thanks.
From: Sosa, Rosa - MX <Rosa.Sosa@am.spectrumcontrol.com>
Sent: Friday, June 26, 2026 2:30 PM
To: Rodarte, Federico - MEX; Christopher Berger
Cc: Info at Turnpack; LLC SO2524915 Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX; Velazquez, Kevin - MEX
Subject: RE: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667Good afternoon,
We need certificate of origin, value, and technical data sheet.
Thanks.
From: Rodarte, Federico - MEX <Federico.Rodarte@am.spectrumcontrol.com>
Sent: Friday, June 26, 2026 2:25 PM
To: Christopher Berger; Sosa, Rosa - MX
Cc: Info at Turnpack; LLC SO2524915 Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX
Subject: RE: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667Thanks Christopher, Customs clearance usually takes no more than 2 days (Rosa Sosa to confirm timing and needs of information in advance).
Thanks
From: Christopher Berger <cberger@turnpack.com>
Sent: Friday, June 26, 2026 1:24 PM
To: Rodarte, Federico - MEX
Cc: Info at Turnpack; LLC SO2524915 Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Sosa, Rosa - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX
Subject: Re: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Federico,
The machine is built and the new control system is installed. Two things remain: we're finishing commissioning of that control system — the motion tuning, recipe setup, and final functional testing on the actual machine — and one last hardware item, the antistatic lid, which installs last and is due in early next week. This control system is the new Beckhoff platform that replaces the obsolete design, and I won't ship until it runs as needed on your floor. We are close to wrapping up.
Because I've given your team enough moving ship dates, I commit to what I control directly and can prove: I will be on-site at your plant to finish installation, commission the machine, and train your operators myself.
I am booking travel today to be on-site the week of July 27. I'll forward my flight itinerary once ticketed so you can see it's firm. The machine docks out ahead of that, and I'll send the exact ship date the moment it's crated.
One ask so we can lock my exact on-site days together: since your team handles the El Paso-to-Juarez importation through WTS, can you confirm your typical clearance and cross time from the broker? If the machine clears earlier than expected, I'll move my trip up — I'd rather be there the week of July 20th or 13th.
I will finish this last stretch correctly and close it out in person.
ChrisOn Thu, Jun 25, 2026 at 2:51 PM Rodarte, Federico - MEX <Federico.Rodarte@am.spectrumcontrol.com> wrote:
Hi Cristopher, any update?
Thanks
From: Rodarte, Federico - MEX
Sent: Monday, June 22, 2026 8:30 AM
To: 'Christopher Berger'
Cc: 'Info at Turnpack'; 'LLC SO2524915 Turnpack'; Castillo, Ricardo - MX; Ortega, Estela - MX; Sosa, Rosa - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX
Subject: RE: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667Hi Christopher, good morning, anxious to see this week update to stay on target 06/26?
Also asking what do you need from our side in regards of the “Installation and Training” plan?
Thanks, please advise…
From: Rodarte, Federico - MEX
Sent: Monday, June 8, 2026 9:23 AM
To: 'Christopher Berger'
Cc: Info at Turnpack; LLC SO2524915 Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Sosa, Rosa - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX
Subject: RE: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667Excellent, thanks!
From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, June 8, 2026 9:19 AM
To: Rodarte, Federico - MEX
Cc: Info at Turnpack; LLC SO2524915 Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Sosa, Rosa - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX
Subject: Re: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Hi Federico,
Attached is the updated project schedule. We are still on target for the 06/26 ship date. This week will be critical as we finalize motor integration testing. I will provide another update on Friday.
Chris
On Tue, May 19, 2026 at 6:19 AM Rodarte, Federico - MEX <Federico.Rodarte@am.spectrumcontrol.com> wrote:
Thanks for the update.
Regards
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, May 19, 2026 7:15 AM
To: Rodarte, Federico - MEX
Cc: Info at Turnpack; LLC SO2524915 Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Sosa, Rosa - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX
Subject: Re: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Federico,
Attached is the updated project schedule (Rev. 2) reflecting last Week's progress. Every long-lead item is confirmed and on plan:
- Beckhoff hardware: confirmed arrival this week
- Applied Motion motor: confirmed by 5/25
- Antistatic lid: ordered, 4-week lead, ships direct to AZ for final install
- Chicago Dial Indicators: confirmed arrival before 6/1
- Coatings: shipping to vendor this week
- CAD released for in-house parts, fabrication in progress
6/26/2026 ship to your WTS broker in El Paso remains the committed date.
Next update is Friday, 5/22, focusing on the Beckhoff bench code dev kickoff and the Applied Motion motor arrival.
Chris
On Mon, May 11, 2026 at 5:27 AM Rodarte, Federico - MEX <Federico.Rodarte@am.spectrumcontrol.com> wrote:
Hi Christopher, thanks for the detailed status.
Being a 6/26 a firm target date we will then NOT pursue the loaner, not to distract a 100% hand on in our machine.
We can wait until, just make sure that 6/26 is a final ETS.
Thanks
From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, May 11, 2026 6:08 AM
To: Rodarte, Federico - MEX
Cc: Info at Turnpack; LLC SO2524915 Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Sosa, Rosa - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX
Subject: Re: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Federico,
I told you Friday for the schedule. It's attached now instead. From this point forward you'll get answers ahead of the question.
Committed ship date to your WTS broker in El Paso: Friday, June 26, 2026.
The attached one-page schedule shows every workstream and milestone supporting that date. Quick summary of the path:- The original X-stage drive motor is obsolete and the supplier's last-time-buy did not materialize. We have redesigned the motion control around Applied Motion drive motors and a Beckhoff industrial PC with touchscreen HMI. This permanently eliminates the obsolescence risk and adds two capabilities the original Midas design did not have: touchscreen operation and recipe management.
- Beckhoff hardware arrives in-house this week, which lets us develop the PLC, HMI, and recipe code on the bench in parallel with mechanical assembly at our build partner's shop. On-machine integration is therefore compressed to one week of motion tuning and commissioning.
- All other components have been received, are on order with confirmed dates, or are moving through machining and coating this week.
I am chasing four items today and will close them out in Friday's update:
- Applied Motion supplier ship date confirmation
- Antistatic lid PO placement and lead time
- Chicago Dial Indicator items (PO26121668) confirmed ETA
- Beckhoff arrival confirmation upon receipt this week
Loaner system: there is no cost to Spectrum. Turnpack covers freight both directions and any duty. If you'd like the loaner shipped this week to bridge the gap until 6/26, confirm and we'll proceed. If not, all hands stay on your machine.
Cadence going forward: written status from me every Friday morning until ship, covering parts received that week, build and test progress, and any schedule change the moment we see it — not after you ask.
The communication gaps on this build were on me. The technical path is solid and you'll see that reflected in the weekly updates starting this Friday.
ChrisOn Thu, May 7, 2026 at 5:26 AM Rodarte, Federico - MEX <Federico.Rodarte@am.spectrumcontrol.com> wrote:
OK Christopher, thanks for replying.
Noted, will wait on tomorrow’s status to see gaps on supplying the new machine, after that will make a call if continue with a loaner or not. I mean if the new machine ETA is kind of within a couple of weeks, will wait… will see then by the new dates are available.
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, May 6, 2026 10:24 PM
To: Rodarte, Federico - MEX
Cc: Info at Turnpack; LLC SO2524915 Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Sosa, Rosa - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX
Subject: Re: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Federico,
You're right, and I owe you a straight answer rather than another general update.
I am not going to give you a ship date tonight that I can't stand behind. You will have one Friday morning, in writing, with the supporting milestones so you can hold us to it. Here is what I can confirm now:
- The X-stage drive motors used in the original Midas design are obsolete with no last-time-buy available. We have redesigned the motion control around Applied Motion motors/drives and a Beckhoff industrial PC with touchscreen HMI. This removes the obsolescence risk permanently and adds touchscreen operation and recipe management that the original Midas design did not have.
- Motors, drives, IPC and panel are all on order. Friday's update will include confirmed delivery dates from each supplier, the resulting ship date with float, and the build/test milestones in between.
- After Friday, you will receive a written status from me every Friday morning until the machine ships — parts received that week, build/test progress, and any schedule change the moment we see it, not after you ask.
Loaner: there is no cost to Spectrum. Turnpack covers freight both directions and any duty. If you want it shipped next week to bridge the gap, confirm and we'll proceed. If not, we'll put all hands on your machine.
The communication gaps on this build are on me. The technical path forward is sound and you'll see that reflected in the cadence starting Friday.
ChrisOn Tue, May 5, 2026 at 8:43 AM Rodarte, Federico - MEX <Federico.Rodarte@am.spectrumcontrol.com> wrote:
Hi Christopher, we, as customers want you to take the initiative to be one step ahead and to provide info not only when we asked for, which is what happens now.
We need our machine, upgraded or not, you committed to a quote and sell t, and pushed out time after time is causing us trouble to fulfill orders with our end customers.
Sounds like a “loaner system” will cause extra costs for us? If so, no, don’t want to go through.
With that said what is the new ETA FOR THE NEW MACHINE?
Please advise.
Get Outlook for iOS
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, May 5, 2026 9:05:33 AM
To: Rodarte, Federico - MEX <Federico.Rodarte@am.spectrumcontrol.com>
Cc: Info at Turnpack <info@turnpack.com>; LLC SO2524915 Turnpack <catchall@turnpack.com>; Castillo, Ricardo - MX <Ricardo.Castillo@am.spectrumcontrol.com>; Ortega, Estela - MX <estela.ortega@am.spectrumcontrol.com>; Sosa, Rosa - MX <Rosa.Sosa@am.spectrumcontrol.com>; Mata, Monica - MX <Monica.Mata@am.spectrumcontrol.com>; Castillo, Ivonne - MX <Ivonne.Castillo@am.spectrumcontrol.com>; Licon, Ana - MEX <Ana.Licon@am.spectrumcontrol.com>; Heredia, Roman - MX <Roman.Heredia@am.spectrumcontrol.com>
Subject: Re: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Hi Federico,
I didn't realize you wanted a loaner system but we started on preparing that go get it shipped to you early next week. I will keep you posted on this.
Regarding your machine we could not purchase more of the X-stage drive motors due to obsolescence even though the Sales Rep had originally indicated that we could make one last buy. We have been working to update the design and have placed orders for different motors that need integration. With the new design also includes a touchscreen and recipe management functionality which the current outdated version lacks.
Thanks
Chris
On Tue, May 5, 2026 at 5:26 AM Rodarte, Federico - MEX <Federico.Rodarte@am.spectrumcontrol.com> wrote:
Any feedback?
From: Rodarte, Federico - MEX
Sent: Thursday, April 30, 2026 8:53 AM
To: 'Christopher Berger'
Cc: Info at Turnpack; LLC SO2524915 Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Sosa, Rosa - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX
Subject: RE: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667Team Turnpack, Christopher, Lorena, the extended six weeks delay due this week.
Have not receive a “loaner system” since, yet would like to know what’s the ETA of our new machine is within next week having the extended six weeks already passed.
Please advise today.
Thanks
From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, March 23, 2026 11:12 AM
To: Rodarte, Federico - MEX
Cc: Info at Turnpack; LLC SO2524915 Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Sosa, Rosa - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX
Subject: Re: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Hi Federico,
Please accept my sincere apologies for the delayed response and the ongoing frustration this has caused your team.
We have received a further update regarding the supply chain issues for the Midas D5L6 De-Lidder (Ref SO2524915). Unfortunately, we are facing an additional six-week delay due to a custom component. Because this part is highly specialized, it cannot be sourced from an alternative vendor or replaced with a different component in a shorter timeframe.
We understand that you desperately need this equipment to meet your own customer commitments. To help bridge this gap, I am currently putting together a loaner system that we hope to ship by the end of this week. This should allow you to maintain operations while we finalize your specific machine.
I will provide a firm confirmation regarding the loaner shipment and a revised ETA for your unit as soon as possible. Thank you for your continued patience.
Best regards,
Chris Berger
On Mon, Mar 23, 2026 at 10:04 AM Rodarte, Federico - MEX <Federico.Rodarte@am.spectrumcontrol.com> wrote:
Team Turnpack, Christopher, Lorena, again and again looking for answers, at least a reply from someone in your Company that is taking care of business.
No one replies, what is the issue?, when you are going to provide feedback on the machine, not the “waiting on new components” but on the updated ETA?
Please advise or at least tell us who to contact if you’re not the right person to follow-up.
Thanks
From: Rodarte, Federico - MEX
Sent: Wednesday, March 18, 2026 8:26 AM
To: Info at Turnpack; Christopher Berger; LLC SO2524915 Turnpack
Cc: Castillo, Ricardo - MX; Ortega, Estela - MX; Sosa, Rosa - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX
Subject: RE: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667Hello, Christopher, Lorena.
We have been dealing with our end- Customer the delays on the equipment availability.
We do receive from you only status that you are waiting on components and promising status… but nothing comes after.
So… what is the status?, when is the new committed ETA while 3/15 did not occur?
Please advise.
Thanks
From: Info at Turnpack <info@turnpack.com>
Sent: Thursday, March 12, 2026 12:20 PM
To: Rodarte, Federico - MEX
Cc: Christopher Berger; LLC SO2524915 Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Sosa, Rosa - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX
Subject: Re: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Hello Team!
we are still waiting on delivery for a few more components. I am expecting to have more information by end of day tomorrow. Your patience is appreciated. thank you.
On Wed, Mar 11, 2026 at 8:39 AM Rodarte, Federico - MEX <Federico.Rodarte@am.spectrumcontrol.com> wrote:
Hello, Christopher, Lorena.
Any update?, 03/15 is this coming Sun/Mon 03/16…. Are we still on target?
Thanks
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, March 4, 2026 1:26 PM
To: Rodarte, Federico - MEX
Cc: LLC SO2524915 Turnpack; Info at Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Sosa, Rosa - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX
Subject: Re: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Hi Federico,
Thank you for checking in.
We are currently addressing a supply chain issue related to the cutter motor on the D5L6 De-Lidder. Normally we keep these motors in stock, however an unusually high volume of machine orders recently depleted our inventory.
We are actively working with the supplier to secure the next delivery and determine the exact timing. At the moment we are still targeting the March 15th delivery date, but we are waiting on final confirmation from the supplier.
I expect to have a firm update for you by this Friday and will send it as soon as I receive confirmation.
Thank you for your patience while we work through this.
Best regards,
Chris BergerOn Wed, Mar 4, 2026 at 12:33 PM Rodarte, Federico - MEX <Federico.Rodarte@am.spectrumcontrol.com> wrote:
Hi Christopher, trust me, before sending a message to you, I’ve checking first with Ms. Ivonne for status.
No update from Feb 20th. yet.
Since you had said that have some supply challenges we would like to know if March the 15th. still the ETA?
Please advise…. Thanks
From: Christopher Berger <cberger@turnpack.com>
Sent: Friday, February 20, 2026 6:47 PM
To: Rodarte, Federico - MEX
Cc: LLC SO2524915 Turnpack; Info at Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Sosa, Rosa - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX
Subject: Re: **3rd Email ** Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Hi Federico,
Apologies for not sending a direct response to you but we have been updating Ivonne and I assumed you would be in touch with her.
We are working on supply chain challenges and will above if we encounter any delays.
Chris
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
On Fri, Feb 20, 2026, 4:31 PM Rodarte, Federico - MEX <Federico.Rodarte@am.spectrumcontrol.com> wrote:
Hello Turnpack team, Christopher, 3rd E-mail sent asking for assistance with no answer , tried also by phone and no answer. Can someone from Turnpack replies?, or who to contact in case you’re not responsible for Customer Service?
Thanks
Get Outlook for iOS
From: Rodarte, Federico - MEX
Sent: Monday, February 16, 2026 7:04:47 AM
To: Christopher Berger <cberger@turnpack.com>; LLC SO2524915 Turnpack <catchall@turnpack.com>; Info at Turnpack <info@turnpack.com>
Cc: Castillo, Ricardo - MX <Ricardo.Castillo@am.spectrumcontrol.com>; Ortega, Estela - MX <estela.ortega@am.spectrumcontrol.com>; Sosa, Rosa - MX <Rosa.Sosa@am.spectrumcontrol.com>; Mata, Monica - MX <Monica.Mata@am.spectrumcontrol.com>; Castillo, Ivonne - MX <Ivonne.Castillo@am.spectrumcontrol.com>; Licon, Ana - MEX <Ana.Licon@am.spectrumcontrol.com>; Heredia, Roman - MX <Roman.Heredia@am.spectrumcontrol.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667Hellos Turnpack team, good morning.
Sent you this E-mail Wednesday, have not receive a response, can you please check and advise at your earliest convenience?
Thanks
From: Rodarte, Federico - MEX
Sent: Wednesday, February 11, 2026 3:38 PM
To: Christopher Berger; LLC SO2524915 Turnpack; Info at Turnpack
Cc: Castillo, Ricardo - MX; Ortega, Estela - MX; Sosa, Rosa - MX; Mata, Monica - MX; Castillo, Ivonne - MX; Licon, Ana - MEX; Heredia, Roman - MX
Subject: RE: Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667Hello Christopher, Turnpack team, can you please share an update of the ETA of the de-lidder?
Desperately needed to have it as soon as possible.
Thanks and appreciate your efforts to improve 03/15 targeted date if possible.
Federico Rodarte R – Mexico Operations
Spectrum Control, Inc
+1 915 592 2249 Xt 106
Federico.Rodarte@am.spectrumControl.com
From: Castillo, Ivonne - MX <Ivonne.Castillo@am.spectrumcontrol.com>
Sent: Friday, February 6, 2026 3:21 PM
To: Christopher Berger; LLC SO2524915 Turnpack
Cc: Info at Turnpack; Castillo, Ricardo - MX; Ortega, Estela - MX; Sosa, Rosa - MX; Rodarte, Federico - MEX; Mata, Monica - MX
Subject: RE: Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667Hi Chris.
The next week I’ll be on vacations so please help me to keep to all in copy for any update.
Thank you and have a good weekend!
Ivonne Castillo
MRO Purchasing
SPECTRUM CONTROL INC.
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, February 5, 2026 9:23 AM
To: Castillo, Ivonne - MX; LLC SO2524915 Turnpack
Cc: Info at Turnpack; Castillo, Ricardo - MX; Suarez, Juan - MEX; Sosa, Rosa - MX; Rodarte, Federico - MEX; Mata, Monica - MX
Subject: RE: Turnpack, LLC Quotation (Ref SO2524915) PO.MX32667IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Hi Ivonne,
I am on a business trip this week and a little behind. I will be in the office tomorrow and then send you an update.
Chris
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
On Thu, Jan 29, 2026 at 13:59 PM Ivonne - MX Castillo wrote:
Hello Chris,
Hope you’re doing well,
Are we still good with target Ship Date: March 15, 2026 ?
Please let us know.
Thank you and have a good afternoon!
Ivonne Castillo
MRO Purchasing
SPECTRUM CONTROL INC.
From: Christopher Berger <cberger@turnpack.com>
Sent: Friday, January 9, 2026 4:57 PM
To: Castillo, Ivonne - MX
Cc: Info at Turnpack; Castillo, Ricardo - MX; Suarez, Juan - MEX; Sosa, Rosa - MX; Turnpack, LLC SO2524915; Mata, Monica - MX
Subject: Re: Turnpack, LLC Quotation (Ref SO2524915) install & training in Mexico?IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Hi Ivonne,
This email confirms receipt of your order for the Midas D5L6 Delidder. We have initiated the project and are proceeding with execution on our standard, proven platform based on prior builds.
Below is the high-level project schedule for planning purposes. This build is largely procurement-, machining-, and assembly-driven, with limited engineering activity focused on BOM verification and minor drawing updates only.
High-Level Project Schedule (Subject to Material Lead Times)
- Requirements Confirmation & BOM Validation:
Final confirmation of scope, verification and cleanup of the existing BOM, and release for purchasing. - Purchasing & Machining:
Procurement of all purchased components and machining/fabrication of custom parts. Long-lead items will be tracked closely. - Build & Wiring:
Mechanical assembly of the machine and control panel build and wiring. - Integration & Testing:
Power-up, functional verification, and process testing. - Documentation, Crating & Delivery:
Final documentation package, crating, and shipment preparation.
Target Ship Date: March 15, 2026
We will communicate proactively if any supplier lead times impact this date. Otherwise, execution will proceed to support shipment on the target date above.
Please let us know if you have any questions or if additional coordination is needed.
Best regards,
ChrisOn Fri, Dec 19, 2025 at 4:56 PM Castillo, Ivonne - MX <Ivonne.Castillo@am.spectrumcontrol.com> wrote:
Hello Chris,
Thank you for your replied.
Please find PO attached for this shipment.
Hopefully, you can help us to improve lead time.
Thank you and have a good afternoon.
Ivonne Castillo
MRO Purchasing
SPECTRUM CONTROL INC.
From: Info at Turnpack <info@turnpack.com>
Sent: Friday, December 19, 2025 4:49 PM
To: Castillo, Ivonne - MX
Cc: Christopher Berger; Castillo, Ricardo - MX; Suarez, Juan - MEX; Sosa, Rosa - MX; Turnpack, LLC SO2524915; Mata, Monica - MX
Subject: Re: Turnpack, LLC Quotation (Ref SO2524915) install & training in Mexico?IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Hello Ivonne
Thank you for the inquiry. I do not see where a PO was sent for this to confirm the order.
Can you please forward to info@turnpack.com so we can get this moving for you?
Once received we can send a update on the lead-time.
Have a great day!
On Fri, Dec 19, 2025, 1:32 PM Castillo, Ivonne - MX <Ivonne.Castillo@am.spectrumcontrol.com> wrote:
Hello Chris,
Hope you’re doing well,
Would you help us to know about status of this SO2524915 delivery, please?
Thank you!
Ivonne Castillo
MRO Purchasing
SPECTRUM CONTROL INC.
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, November 4, 2025 8:52 AM
To: Castillo, Ivonne - MX
Cc: Info at Turnpack; Castillo, Ricardo - MX; Suarez, Juan - MEX; Sosa, Rosa - MX; Turnpack, LLC SO2524915; Ortega, Estela - MX; Mata, Monica - MX
Subject: Re: Turnpack, LLC Quotation (Ref SO2524915) install & training in Mexico?IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Hi Ivonne,
Yes, installation and training in Juarez Chihuahua, Mexico is provided with these line items. We will fly into El Paso and then probably need some advice from you on how to best cross the border and which hotel to stay in.
Chris
On Tue, Nov 4, 2025 at 8:07 AM Castillo, Ivonne - MX <Ivonne.Castillo@am.spectrumcontrol.com> wrote:
Good day Chris,
We are still waiting the response regarding if Install & Training is available here in Juarez Chihuahua, Mexico
Please let us know if not is available.
If service isn’t available, please help us to remove “install & Training” from quote and let us know how guarantee will be affected if we do the installation by ourself.
Thank you!
Ivonne Castillo
MRO Purchasing
SPECTRUM CONTROL INC.
From: Castillo, Ivonne - MX
Sent: Monday, November 3, 2025 7:51 AM
To: Info at Turnpack
Cc: Castillo, Ricardo - MX; Suarez, Juan - MEX; Sosa, Rosa - MX; Turnpack, LLC SO2524915; Ortega, Estela - MX; Mata, Monica - MX
Subject: RE: Turnpack, LLC Quotation (Ref SO2524915) help for update quote date.Good day Chris,
Information received. Thank you!
This location is our broker warehouse (we do all importation arrangements from there).
SHIP TO ADDRESS:
Spectrum Control, De Mexico
C/O WTS Corporation Inc.
Our location is in Juarez, Chihuahua. Mexico. so, regarding Install & Training, are you available to do it here in Mexico?
Please confirm.
Thanks again & have a great week!
Ivonne Castillo
MRO Purchasing
SPECTRUM CONTROL INC.
From: Info at Turnpack <info@turnpack.com>
Sent: Saturday, November 1, 2025 9:20 AM
To: Castillo, Ivonne - MX
Cc: Castillo, Ricardo - MX; Suarez, Juan - MEX; Sosa, Rosa - MX; Turnpack, LLC SO2524915
Subject: Re: Turnpack, LLC Quotation (Ref SO2524915) help for update quote date.IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Hello Ivonne,
Please see attached forms per your request.
Sales/Engineering
Contact name: Chris Berger
Address: 22425 S Scotland Ct 104
Email: cberger@turnpack.com
Phone number: 480.331.1878
Document Processing
Contact name: Lorena Carrillo
Address: 22425 S Scotland Ct 104
Email: info@turnpack.com
Phone number: 480.331.1878
On Fri, Oct 31, 2025, 10:11 AM Castillo, Ivonne - MX <Ivonne.Castillo@am.spectrumcontrol.com> wrote:
Hi Chris,
Received, Thank you!
Would you help us to provide information to do all arrangements for payment thru wire transfer, please?
Also, we need some information for your Company for uploaded in our supplier system. Would you help us to provide it please?
Contact name:
Address:
Email:
Phone number:
W9 form
and filled out attached form.
Thank you and Happy Halloween!
Ivonne Castillo
MRO Purchasing
SPECTRUM CONTROL INC.
From: Info at Turnpack <info@turnpack.com>
Sent: Friday, October 31, 2025 10:30 AM
To: Castillo, Ivonne - MX
Cc: Castillo, Ricardo - MX; Suarez, Juan - MEX; Sosa, Rosa - MX; Turnpack, LLC SO2524915
Subject: Re: Turnpack, LLC Quotation (Ref SO2524915) help for update quote date.IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Hi Ivonne,
Thanks for your email. I just resent the quote from our system. Please let us know if you have any questions.
Chris
On Thu, Oct 30, 2025 at 3:16 PM Castillo, Ivonne - MX <Ivonne.Castillo@am.spectrumcontrol.com> wrote:
Hello Chris,
Hope you’re doing well,
We have the purchase for the de-lidder authorized but quotation attached date now is expired.
Would you help us for update it please or can we use it anyway?
Please let us know
Thank you!
Ivonne Castillo
MRO Purchasing
SPECTRUM CONTROL INC.
From: Info at Turnpack <info@turnpack.com>
Sent: Tuesday, August 5, 2025 3:34 PM
To: Castillo, Ricardo - MX
Cc: Sosa, Rosa - MX; Castillo, Ivonne - MX; Turnpack, LLC SO2524915; Suarez, Juan - MEX
Subject: Re: Turnpack, LLC Quotation (Ref SO2524915) help for update quote date.IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
Hi Ricardo,
Sorry about that. I kept looking for DSF6 and didn't see the mistake of D5F6. Attached is the updated quote.
Chris
On Tue, Aug 5, 2025 at 2:28 PM Castillo, Ricardo - MX <Ricardo.Castillo@am.spectrumcontrol.com> wrote:
Hi Chris
Cover page of quotation shows a D5F6, while the one we look for is a linear delidder not fiber one. We want a D5L6.
There might be an issue while approving our internal CER if we show a different model on cover than the one that is on next pages.
From: Info at Turnpack <info@turnpack.com>
Sent: Tuesday, August 5, 2025 3:25 PM
To: Sosa, Rosa - MX
Cc: Castillo, Ivonne - MX; Turnpack, LLC SO2524915; Suarez, Juan - MEX; Castillo, Ricardo - MX
Subject: Re: Turnpack, LLC Quotation (Ref SO2524915) help for update quote date.IMPORTANT: This email originated from outside of Spectrum Control. Do not click any links or open any attachments unless you know the content is safe.
HI Rosa,
I am not sure I follow. Where does it say DSF6?
Chris
On Tue, Aug 5, 2025 at 1:36 PM Sosa, Rosa - MX <Rosa.Sosa@am.spectrumcontrol.com> wrote:
by "Langford, Nathan - US" <Nathan.Langford@am.spectrumcontrol.com> - 12:02 - 7 Oct 2026


