|
EXTERNAL EMAIL: DO NOT click links or open attachments unless you trust the sender AND know the content is safe. |
Hi,
can you confirm whether the unit is new and unused
Regards,
Esha
thread::v8jjcHABNPC4rSXl7oiyKAc::
Hi Turnpack,
I just received the new box of wafer pack adapters. These are much improved in the flatness and slide super easily in and out of the tool now.
However, the slot configurations have some that are rotated 180deg from where we were expecting them to be. I found it on two of them, and currently screening the rest of them and will report back if there are any additional fallout. Can I ship these back to get redone?
Thanks,Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Garrett Davidson
Sent: Tuesday, June 9, 2026 10:24 AM
To: 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Lorena Carrillo' <lcarrillo@turnpack.com>; 'Turnpack, LLC SO26141038' <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>; 'Ivan Arevalo' <iarevalo@turnpack.com>; 'Brandon Benavidez' <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Hi Chris,
I received the new tool jigs and they are working much better! Thank you for reworking those and getting them turned around quickly!
Thank you!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Garrett Davidson
Sent: Tuesday, June 2, 2026 10:26 AM
To: 'Christopher Berger' <cberger@turnpack.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>; Ivan Arevalo <iarevalo@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
No huge deadline for the adapters. We have what we need for the next several weeks. Mid July would be a good target date for these. Super unfortunate that this package seemed to not be treated very well. I’ll see what we can do from the packaging side!
Thanks for letting me know,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, June 2, 2026 10:11 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>; Ivan Arevalo <iarevalo@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Hi Garret,
Unfortunately, we have bad news regarding the returned adapters. They weren't packaged well, causing additional damage. We can't repair them and must remake them which means a longer lead time. What's your deadline for getting them back to you?
Chris
On Tue, Jun 2, 2026 at 10:04 AM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
It’s not urgent for us at this point, we’re not quite at the point that we need all of them yet. I can work on getting this shipped back if that’s easiest
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, June 1, 2026 2:57 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>; Ivan Arevalo <iarevalo@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Garrett,
Well, I'd like to make it right. If it's not urgent we can build a whole new adapter and swap it out but that would take a few weeks. This approach would prevent you from being short an adapter. Let me know what you think
Chris
On Mon, Jun 1, 2026 at 2:52 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
I held onto that one and kept it over here! I’m not worried about the engraving issue. Would you like it back? I can use a label or engrave over here if I need it.
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, June 1, 2026 2:22 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>; Ivan Arevalo <iarevalo@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Hi Garrett,
We got the shipment but it didn't incl. the adapter with the engraving issue. How do you want to proceed with this one?
Chris
On Wed, May 27, 2026 at 4:52 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
For sure! I’ll send a couple in the box for you to test. But yeah, I tried several of our toolholders on an older jig and a newer jig and they all showed the same issues.
I include an older jig as well (labeled) so you can compare to that as well. I’ll try to get this over and shipped out tomorrow!
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, May 27, 2026 4:45 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Hi Garrett,
Not good, but we'll fix them no problem. We have tool holders here and tested them. The only thing I can think of is that ours are on the lower end of the diameter tolerance and yours are on the upper end. Either way send them back and we'll open them up by 130um. Can you also spare one of your toolholders to ensure we are good before returning them to you?
Chris
On Wed, May 27, 2026 at 4:35 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Sweet!
The other item that is more of a concern is that the holes that the tools sit inside of are basically the EXACT size of the tool holders themselves. I can pick up the tools in and out okay, but I have to push (with some decent force) each of the tools into the holes to fully seat them on the holder. I compared with the previous order of the tooling jigs and the tools are much easier to put into the holes and need zero force to sit correctly.
I attached a picture of the measurements I took of the holes in slot 7 on both jigs. The new order of jigs is ~130um smaller which is likely causing the seating issue. We will have a high risk of bending, rotating, or otherwise damaging the tools so we are not comfortable using these as is.
If I were to send all the jigs back, would you be able to machine a slightly larger hole? I can send a jig from a previous order to you or send an empty tool holder for you to test yourself if that helps, or I can take additional measurements as needed. We will have a high risk of bending, rotating, or otherwise damaging the tools so we are not comfortable using these as is. I definitely already rotated one of the tools as I was attempting to pull it off of the jig by hand ☹ Let me know!
Thanks!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, May 27, 2026 2:55 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Hi Garrett,
Thanks for the update. You are correct that the set screws are adjustable to account for general tolerances of the toolbank assemblies within the machine. There are set screws for the left, right, and height adjustments. I'd suggest you dial in one and then match all the others; chances are they'll be very close. Let us know if you have any other questions.
Chris
On Wed, May 27, 2026 at 2:50 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
I looked at a few loading jigs, and testing them had some issues. I just found that the screws on either end was obstructing the loading, but I can just twist them more to fit. Each of the jigs have them twisted and sticking out at different lengths though. Is there a specific length they should be? Or should I just size them to slide easily in and out of the tool holders?
Just want to make sure these screws are for any other reason than easy loading/aligning to the tool holder itself 😊. I’ll go through the rest of them either today or tomorrow and let you know if I encounter any more issues.
Once I verify the other jigs are good to go, I’ll send the adapters back and shoot over the tracking number for you.
Thanks!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, May 27, 2026 10:46 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Hi Garrett,
Sorry about that. We do check them for flatness and vacuum seal so it would be best if you can ship them back for RCA and we'll fix it. Hope this doesn't delay your project.
Any issues with the Loading Jigs?
Chris
On Wed, May 27, 2026 at 10:34 AM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Hi Chris,
I went through the rest of the delivery and found 3 more that do not slide all the way into the tool (for a total of 4x). Physically they look similar, but may have some slight warpage issues causing these issues. Any ideas on how to fix this? I’m afraid of trying to bend them to fix the warpage. Would you like me to ship them back for you to take a look?
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Garrett Davidson
Sent: Wednesday, May 27, 2026 8:04 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Sorry, these are two SEPARATE adapters. I’m going through the other adapters now, and will let you know if I see any more issues!
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, May 27, 2026 7:58 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Hi Garrett,
Thanks for the info. My fault on the partially engraved one, I was supposed to let you know but fell behind. We already have a replacement for that one in queue but I wanted to ship all 20 just in case you needed the full qty right away. Is this the same adapter you are having the issue with on the suction cup or is this a different one?
Chris
On Wed, May 27, 2026 at 7:50 AM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Unsure if this sent or if the full email did not send. I received a bunch of error messages.
Please find the video up in the fileXchange if you need!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Garrett Davidson
Sent: Tuesday, May 26, 2026 6:28 PM
To: 'Lorena Carrillo' <lcarrillo@turnpack.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Turnpack, LLC SO26141038' <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Hi Chris/Turnpack,
I started opening up the box, and found an issue with one of the adapters:
As I slide the adapter into our tool, it stops here and does not allow us to slide it all the way to the vacuum port. The adapter itself seemed warped when placed on an optical table. I checked 5 more so far from the latest shipment and they all look good! Just this one is unable to slide in. I attached a video of myself trying to push it it and it not going all the way in without me having to physically lift the adapter into place and have a high risk of “confetti-ing” components in waffle packs. Let me know if it doesn’t come through. I also uploaded into our FileXchange system for you to review. Let me know if anyone needs access to this:
One of the 5 that I looked at after this one is missing most of the writing at the bottom of the adapter itself. Not a huge deal as it’s just cosmetic to us, but did want to let you know about it:
I will go through all the rest tomorrow morning and let you know if I encounter any more like this.
Can I send this one back to you to root cause or any ideas how to fix up? I could try to bend it but unsure how brittle the adapter itself is or if I’ll make it worse.
Thanks!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Garrett Davidson
Sent: Wednesday, May 20, 2026 4:23 PM
To: Lorena Carrillo <lcarrillo@turnpack.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Turnpack, LLC SO26141038' <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Thank you!!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Wednesday, May 20, 2026 4:20 PM
To: 'Christopher Berger' <cberger@turnpack.com>; Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: 'Turnpack, LLC SO26141038' <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Hello Team, the order has shipped complete today. Here is your tracking number for reference. 872056271057
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, May 19, 2026 11:18 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Hi Garrett,
We have the adapters back from anodizing but I slightly underestimated the assembly time. We are wrapping up the assembly today and tomorrow will be for engraving and testing and then we'll ship them out tomorrow.
The toolholder jigs are complete and ready to go.
Thanks
Chris
On Mon, May 18, 2026 at 4:29 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Hey Chris,
Were you able to ship out those parts? And have a tracking number if possible?
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, May 13, 2026 7:55 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Garrett,
We experienced a slight delay because a machine was down, but parts are currently at anodizing. We are expediting that process, and then we anticipate two days for post-anodizing assembly & engraving. We might be able to ship it out Saturday, worst case it'll be Monday. I'll keep you posted when the parts come back from anodizing and then I should be able to confirm actual ship date.
Chris
On Wed, May 13, 2026 at 7:39 AM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Hey Chris,
Just checking if you think you’d be able to ship anything this week?
Thanks!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, April 28, 2026 4:54 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Perfect. Thanks for confirming
On Tue, Apr 28, 2026 at 4:44 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Yeah that’s okay with me!
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, April 28, 2026 4:23 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Garrett,
Yes. Example image below shows one side machined and the top not machined. If we machine all 4 sides they will all look like the side edge in the image below. Also, we did start with the adapters, once they are ready and in case the jigs are not I will let you know and we can do a partial shipment.
Thanks
Chris
On Tue, Apr 28, 2026 at 4:18 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Sorry, what do you mean by “Obscuring them”? would it “fog” the glass or make it not transparent?
The wafer pack adapters are a higher priority for us if possible! But no worries either way.
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, April 28, 2026 3:44 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Hi Garrett,
Making good progress. As of now it looks like we'll ship the order the week of 05/11. We had a question about the tool holder jigs. We would prefer to machine them on multiple sides but doing so would obscure them. Reason being is that the stock material has significant tolerancing, so facing all sides would ensure greater consistency. Any objections to that?
Chris
On Tue, Apr 28, 2026 at 2:54 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Hey Chris,
Hope you are doing well! Do you have an ETA for this order? (PO#3714362)
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Chris Berger <info@turnpack.com>
Sent: Tuesday, April 7, 2026 9:03 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Subject: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Hi Garrett, Attached is the quote for the adapters and loading jigs. Let me know if you need anything else. Chris Christopher Berger Phone: +1 [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏
SO26141038
$ 69,200.00
Expires on 05/07/2026
Hi Garrett,
Attached is the quote for the adapters and loading jigs. Let me know if you need anything else.
Chris
Christopher Berger
Turnpack — Efficiency Redefined Through Automation
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
|
||||||||||||||||||||||||
|
|
You don't often get email from notifications@turnpack.com.
Learn why this is important
|
Hello,
Your order SO2506843 amounting in
$ 13,121.99 has been confirmed.
Thank you for your trust!
Do not hesitate to contact us if you have any questions.
|
||||||||||||||||||||||||
|
Will do
Thank you for your time,
Lorena Carrillo
From: Dawn Davis <Dawn.davis@sarasmicro.com>
Sent: Monday, February 23, 2026 4:45 PM
To: Lorena <info@turnpack.com>
Subject: Re: PO 3047
Lorena,
Please continue to see if your able to source this part for this order. I am also going to find out if this is needed on our end since it is so old.
Thank you,
Dawn
|
||||||||||||||||||||||||
|
From: Lorena <info@turnpack.com>
Sent: Friday, February 20, 2026 11:46 AM
To: Dawn Davis <Dawn.davis@sarasmicro.com>
Subject: RE: PO 3047
We have been unable to source the parts so I do no not have a definitive timeline but as soon as we do I will let you know.
Thank you for your time,
Lorena Carrillo
From: Dawn Davis <Dawn.davis@sarasmicro.com>
Sent: Friday, February 20, 2026 11:25 AM
To: Lorena <info@turnpack.com>
Subject: Re: PO 3047
Hi Lorena,
I still show it open. My requestor is on paternity leave so I would like to keep the balance of this order open if possible. I should be able to get you an answer by end of next week. What is the timeline when the balance can ship?
Thank you,
Dawn
|
||||||||||||||||||||||||
|
From: Lorena <info@turnpack.com>
Sent: Thursday, February 19, 2026 6:16 PM
To: Dawn Davis <Dawn.davis@sarasmicro.com>
Subject: RE: PO 3047
Ok we will cancel on our end. Do do have it open but have been uable to source the remaining items.
Thank you for your time,
Lorena Carrillo
From: Dawn Davis <Dawn.davis@sarasmicro.com>
Sent: Tuesday, January 27, 2026 10:41 AM
To: info@turnpack.com
Subject: PO 3047
Hi Lorena,
It's been some time and wanted to follow up on the remaining items on the above PO. If you don't show this order open on your end, I will cancel the remaining balance on my end.
Thank you,
Dawn
|
Thanks Lorena. Sorry I didn’t send the label earlier this week but could you please make sure the PParts get shipped back today? We need them for production again.
Thank you!
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Thursday, July 9, 2026 9:42 AM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Cc: 'Keith Chalman' <keith@cti-rep.com>; 'Turnpack, LLC SO26201063' <catchall@turnpack.com>; 'Brandon Benavidez' <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Thank you yes this looks to be the same label. It is already back with production for when the shipment is ready.
From: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Sent: Thursday, July 9, 2026 8:13 AM
To: Info at Turnpack <info@turnpack.com>
Cc: Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Good morning,
Can you please use the attached label for shipping back the PParts today? Let me know if you have any questions about the parts or want to have a quick call this week or early next week.
Thank you!
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Info at Turnpack <info@turnpack.com>
Sent: Tuesday, June 30, 2026 9:58 PM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Cc: Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Hi Jeff! Thank you for the update. We do not use UPS only Fedex. Could you please either supply a fedex account or send a label we can use?
Respectfully,
Lorena Carrillo
On Tue, Jun 30, 2026, 9:32 PM Galli, Jeff (US) <Jeff.Galli@teledyne.com> wrote:
Hi All,
The parts went out today. Tracking number: 1Z8563AR0393655535.
I am out of office for the next week so you can have the parts for about a week. If you could please ship back the PParts by the beginning of next week that would be appreciated. The other components can be held onto. Please use UPS 8563AR to return the parts to my attention and the address in my signature. I will have some email if you have any questions or want to hop on a quick call.
Thanks!
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Keith Chalman <keith@cti-rep.com>
Sent: Tuesday, June 30, 2026 10:39 AM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>; Info at Turnpack <info@turnpack.com>
Cc: Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Hi Jeff,
Please send to:
Chris Berger
Turnpack
22425 S Scotland Ct, Suite 104
p: 480-648-4686
c: 480-273-4686
Let us know if there are further questions.
Best Regards,
Keith Chalman
President - Chalman Technologies
c (714) 412-5411
a 3150 E. La Palma Ave. Suite K, Anaheim, CA 92806
Manufacturer's Representative for:
(entire principal list at www.cti-rep.com)
From: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Sent: Tuesday, June 30, 2026 9:51 AM
To: Info at Turnpack <info@turnpack.com>; Keith Chalman <keith@cti-rep.com>
Cc: Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Can you confirm the address to ship the parts? I am trying to get them out today.
Thanks,
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Galli, Jeff (US)
Sent: Thursday, June 18, 2026 9:15 AM
To: Info at Turnpack <info@turnpack.com>; Keith Chalman <keith@cti-rep.com>
Cc: Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Good morning
Yes I have been getting some things ready. Trying to build ahead a bit so we can be down a set of pparts because all the ones we have we use weekly for production. Hoping to be able to send them all next week. The part we will need back within a week or so, the boats and parts can be kept for longer.
Sent from Workspace ONE Boxer
On Jun 17, 2026 4:18 PM, Keith Chalman <keith@cti-rep.com> wrote:
External Email
Hi Jeff,
I just wanted to check in to see if you've had a chance to get us the boats and p-parts question mark.
Let us know.
Keith
From: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Sent: Friday, June 5, 2026 7:57 AM
To: Info at Turnpack <info@turnpack.com>
Cc: Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Hi Chris,
Sounds good. I like the option for magnets or bolts if needed.
Good point about the ID axis. On the current systems there are two indexes because of the length of boats. We have a single index at the main but I know it has always been close.
I will work on getting some parts to sent out to you. I might have some older PParts that aren’t used for production that can be sent, otherwise we would need a quick turnaround on the PParts but the boats and other parts could be held on for longer. I’ll try to get those out next week.
If you have some preliminary designs to show I’d be interested in jumping on another quick call just to see them or if it would help clear up any other issues.
Thanks and hope you have a great weekend!
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Info at Turnpack <info@turnpack.com>
Sent: Thursday, June 4, 2026 4:24 PM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Cc: Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Hi Jeff,
Yes, the plan is to use magnets for the top plates instead of bolts. If you want we can use both magnets and bolts, leaving you the option of whether to use the bolts. The 3 boat designs you provided (Boson, BS8X and Tura) should all operate within the envelope of the machine. One item we flagged is that the center to center distance from the first to the last pocket is just under 12" of travel. Depending on the machine configuration with an ID axis the main axis travel can be limited to 10". Can you confirm that there are no existing travel issues with the boat designs you have provided?
What would be very helpful is to have a physical sample of each boat and part, along with the design files. Ideally, you could send us one p-part set for 1-day so we can review the existing design and prevent surprises.
If it makes sense we could jump on another 30min call to confirm a few things and walk through the models you provided.
Chris
On Tue, Jun 2, 2026 at 10:59 AM Galli, Jeff (US) <Jeff.Galli@teledyne.com> wrote:
Hi Keith and Chris,
For the PParts is it possible to have them in/out with magnets and not have to move the track once the base is set? Were you able to stop the boats in the correct position even with the change in the part and boat sizes? For the boson part we have 2 different board sizes (boats are the same), do you need to take a look at that board as well or we can copy the interface of the PPart we are using now?
If that all looks good I will probably go ahead and order. I’m thinking what we will need is:
1x ID Base
4x Main Base
4x Main insert – Boson
2x Main insert – Tura
2x Main insert - BosonHD
1x ID insert - BosonHD
Thanks,
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Keith Chalman <keith@cti-rep.com>
Sent: Monday, June 1, 2026 3:40 PM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Hi Jeff,
Just checking to see if you have any questions on that quote Chris sent? Attached again here.
Let us know.
Best Regards,
Keith Chalman
President - Chalman Technologies
c (714) 412-5411
a 3150 E. La Palma Ave. Suite K, Anaheim, CA 92806
Manufacturer's Representative for:
From: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Sent: Tuesday, May 26, 2026 6:52 PM
To: Turnpack, LLC SO26201063 <catchall@turnpack.com>; Keith Chalman <keith@cti-rep.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Hi Chris and Keith,
Thanks for the quote. I will review it and organize my thoughts a bit and let you know if I have any questions by the end of the week.
Hope you enjoyed your long weekend!
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: May 14-18
Teledyne Confidential; Commercially Sensitive Business Data
From: Chris Berger <info@turnpack.com>
Sent: Tuesday, May 26, 2026 7:23 AM
To: Jeff Galli <jeff.galli@teledyneflir.com>
Subject: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Hi Jeff, Attached is the quote for the split p-part bonding inserts for the 3 products for 1 machine. Let me know if you have any questions. If [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏
SO26201063
$ 21,150.00
Expires on 06/21/2026
Hi Jeff,
Attached is the quote for the split p-part bonding inserts for the 3 products for 1 machine. Let me know if you have any questions.
If you intend to move forward it would be best if you could send us boats and possibly some parts as well just to make sure clearance is not going to be an issue.
Chris
Christopher BergerPhone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
Turnpack — Efficiency Redefined Through Automation
Thanks Lorena. Sorry I didn’t send the label earlier this week but could you please make sure the PParts get shipped back today? We need them for production again.
Thank you!
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Thursday, July 9, 2026 9:42 AM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Cc: 'Keith Chalman' <keith@cti-rep.com>; 'Turnpack, LLC SO26201063' <catchall@turnpack.com>; 'Brandon Benavidez' <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
|
External Email |
Thank you yes this looks to be the same label. It is already back with production for when the shipment is ready.
From: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Sent: Thursday, July 9, 2026 8:13 AM
To: Info at Turnpack <info@turnpack.com>
Cc: Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Good morning,
Can you please use the attached label for shipping back the PParts today? Let me know if you have any questions about the parts or want to have a quick call this week or early next week.
Thank you!
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Info at Turnpack <info@turnpack.com>
Sent: Tuesday, June 30, 2026 9:58 PM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Cc: Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
|
External Email |
Hi Jeff! Thank you for the update. We do not use UPS only Fedex. Could you please either supply a fedex account or send a label we can use?
Respectfully,
Lorena Carrillo
On Tue, Jun 30, 2026, 9:32 PM Galli, Jeff (US) <Jeff.Galli@teledyne.com> wrote:
Hi All,
The parts went out today. Tracking number: 1Z8563AR0393655535.
I am out of office for the next week so you can have the parts for about a week. If you could please ship back the PParts by the beginning of next week that would be appreciated. The other components can be held onto. Please use UPS 8563AR to return the parts to my attention and the address in my signature. I will have some email if you have any questions or want to hop on a quick call.
Thanks!
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Keith Chalman <keith@cti-rep.com>
Sent: Tuesday, June 30, 2026 10:39 AM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>; Info at Turnpack <info@turnpack.com>
Cc: Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Hi Jeff,
Please send to:
Chris Berger
Turnpack
22425 S Scotland Ct, Suite 104
p: 480-648-4686
c: 480-273-4686
Let us know if there are further questions.
Best Regards,
Keith Chalman
President - Chalman Technologies
c (714) 412-5411
a 3150 E. La Palma Ave. Suite K, Anaheim, CA 92806
Manufacturer's Representative for:
(entire principal list at www.cti-rep.com)
From: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Sent: Tuesday, June 30, 2026 9:51 AM
To: Info at Turnpack <info@turnpack.com>; Keith Chalman <keith@cti-rep.com>
Cc: Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Can you confirm the address to ship the parts? I am trying to get them out today.
Thanks,
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Galli, Jeff (US)
Sent: Thursday, June 18, 2026 9:15 AM
To: Info at Turnpack <info@turnpack.com>; Keith Chalman <keith@cti-rep.com>
Cc: Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Good morning
Yes I have been getting some things ready. Trying to build ahead a bit so we can be down a set of pparts because all the ones we have we use weekly for production. Hoping to be able to send them all next week. The part we will need back within a week or so, the boats and parts can be kept for longer.
Sent from Workspace ONE Boxer
On Jun 17, 2026 4:18 PM, Keith Chalman <keith@cti-rep.com> wrote:
External Email
Hi Jeff,
I just wanted to check in to see if you've had a chance to get us the boats and p-parts question mark.
Let us know.
Keith
From: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Sent: Friday, June 5, 2026 7:57 AM
To: Info at Turnpack <info@turnpack.com>
Cc: Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Hi Chris,
Sounds good. I like the option for magnets or bolts if needed.
Good point about the ID axis. On the current systems there are two indexes because of the length of boats. We have a single index at the main but I know it has always been close.
I will work on getting some parts to sent out to you. I might have some older PParts that aren’t used for production that can be sent, otherwise we would need a quick turnaround on the PParts but the boats and other parts could be held on for longer. I’ll try to get those out next week.
If you have some preliminary designs to show I’d be interested in jumping on another quick call just to see them or if it would help clear up any other issues.
Thanks and hope you have a great weekend!
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Info at Turnpack <info@turnpack.com>
Sent: Thursday, June 4, 2026 4:24 PM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Cc: Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Hi Jeff,
Yes, the plan is to use magnets for the top plates instead of bolts. If you want we can use both magnets and bolts, leaving you the option of whether to use the bolts. The 3 boat designs you provided (Boson, BS8X and Tura) should all operate within the envelope of the machine. One item we flagged is that the center to center distance from the first to the last pocket is just under 12" of travel. Depending on the machine configuration with an ID axis the main axis travel can be limited to 10". Can you confirm that there are no existing travel issues with the boat designs you have provided?
What would be very helpful is to have a physical sample of each boat and part, along with the design files. Ideally, you could send us one p-part set for 1-day so we can review the existing design and prevent surprises.
If it makes sense we could jump on another 30min call to confirm a few things and walk through the models you provided.
Chris
On Tue, Jun 2, 2026 at 10:59 AM Galli, Jeff (US) <Jeff.Galli@teledyne.com> wrote:
Hi Keith and Chris,
For the PParts is it possible to have them in/out with magnets and not have to move the track once the base is set? Were you able to stop the boats in the correct position even with the change in the part and boat sizes? For the boson part we have 2 different board sizes (boats are the same), do you need to take a look at that board as well or we can copy the interface of the PPart we are using now?
If that all looks good I will probably go ahead and order. I’m thinking what we will need is:
1x ID Base
4x Main Base
4x Main insert – Boson
2x Main insert – Tura
2x Main insert - BosonHD
1x ID insert - BosonHD
Thanks,
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Keith Chalman <keith@cti-rep.com>
Sent: Monday, June 1, 2026 3:40 PM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Hi Jeff,
Just checking to see if you have any questions on that quote Chris sent? Attached again here.
Let us know.
Best Regards,
Keith Chalman
President - Chalman Technologies
c (714) 412-5411
a 3150 E. La Palma Ave. Suite K, Anaheim, CA 92806
Manufacturer's Representative for:
From: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Sent: Tuesday, May 26, 2026 6:52 PM
To: Turnpack, LLC SO26201063 <catchall@turnpack.com>; Keith Chalman <keith@cti-rep.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Hi Chris and Keith,
Thanks for the quote. I will review it and organize my thoughts a bit and let you know if I have any questions by the end of the week.
Hope you enjoyed your long weekend!
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: May 14-18
Teledyne Confidential; Commercially Sensitive Business Data
From: Chris Berger <info@turnpack.com>
Sent: Tuesday, May 26, 2026 7:23 AM
To: Jeff Galli <jeff.galli@teledyneflir.com>
Subject: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Hi Jeff, Attached is the quote for the split p-part bonding inserts for the 3 products for 1 machine. Let me know if you have any questions. If [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏
SO26201063
$ 21,150.00
Expires on 06/21/2026
Hi Jeff,
Attached is the quote for the split p-part bonding inserts for the 3 products for 1 machine. Let me know if you have any questions.
If you intend to move forward it would be best if you could send us boats and possibly some parts as well just to make sure clearance is not going to be an issue.
Chris
Christopher BergerPhone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
Turnpack — Efficiency Redefined Through Automation
Email Template
|
Hi Turnpack,
I just received the new box of wafer pack adapters. These are much improved in the flatness and slide super easily in and out of the tool now.
However, the slot configurations have some that are rotated 180deg from where we were expecting them to be. I found it on two of them, and currently screening the rest of them and will report back if there are any additional fallout. Can I ship these back to get redone?
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Garrett Davidson
Sent: Tuesday, June 9, 2026 10:24 AM
To: 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Lorena Carrillo' <lcarrillo@turnpack.com>; 'Turnpack, LLC SO26141038' <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>; 'Ivan Arevalo' <iarevalo@turnpack.com>; 'Brandon Benavidez' <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Hi Chris,
I received the new tool jigs and they are working much better! Thank you for reworking those and getting them turned around quickly!
Thank you!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Garrett Davidson
Sent: Tuesday, June 2, 2026 10:26 AM
To: 'Christopher Berger' <cberger@turnpack.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>;
Ivan Arevalo <iarevalo@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
No huge deadline for the adapters. We have what we need for the next several weeks. Mid July would be a good target date for these. Super unfortunate that this package seemed to not be treated very well. I’ll see what we can do from the packaging side!
Thanks for letting me know,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, June 2, 2026 10:11 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>;
Ivan Arevalo <iarevalo@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Hi Garret,
Unfortunately, we have bad news regarding the returned adapters. They weren't packaged well, causing additional damage. We can't repair them and must remake them which means a longer lead time. What's your deadline for getting them back to you?
Chris
On Tue, Jun 2, 2026 at 10:04 AM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
It’s not urgent for us at this point, we’re not quite at the point that we need all of them yet. I can work on getting this shipped back if that’s easiest
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, June 1, 2026 2:57 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>; Ivan Arevalo <iarevalo@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Garrett,
Well, I'd like to make it right. If it's not urgent we can build a whole new adapter and swap it out but that would take a few weeks. This approach would prevent you from being short an adapter. Let me know what you think
Chris
On Mon, Jun 1, 2026 at 2:52 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
I held onto that one and kept it over here! I’m not worried about the engraving issue. Would you like it back? I can use a label or engrave over here if I need it.
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, June 1, 2026 2:22 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>; Ivan Arevalo <iarevalo@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Hi Garrett,
We got the shipment but it didn't incl. the adapter with the engraving issue. How do you want to proceed with this one?
Chris
On Wed, May 27, 2026 at 4:52 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
For sure! I’ll send a couple in the box for you to test. But yeah, I tried several of our toolholders on an older jig and a newer jig and they all showed the same issues.
I include an older jig as well (labeled) so you can compare to that as well. I’ll try to get this over and shipped out tomorrow!
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, May 27, 2026 4:45 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Hi Garrett,
Not good, but we'll fix them no problem. We have tool holders here and tested them. The only thing I can think of is that ours are on the lower end of the diameter tolerance and yours are on the upper end. Either way send them back and we'll open them up by 130um. Can you also spare one of your toolholders to ensure we are good before returning them to you?
Chris
On Wed, May 27, 2026 at 4:35 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Sweet!
The other item that is more of a concern is that the holes that the tools sit inside of are basically the EXACT size of the tool holders themselves. I can pick up the tools in and out okay, but I have to push (with some decent force) each of the tools into the holes to fully seat them on the holder. I compared with the previous order of the tooling jigs and the tools are much easier to put into the holes and need zero force to sit correctly.
I attached a picture of the measurements I took of the holes in slot 7 on both jigs. The new order of jigs is ~130um smaller which is likely causing the seating issue. We will have a high risk of bending, rotating, or otherwise damaging the tools so we are not comfortable using these as is.
If I were to send all the jigs back, would you be able to machine a slightly larger hole? I can send a jig from a previous order to you or send an empty tool holder for you to test yourself if that helps, or I can take additional measurements as needed. We will have a high risk of bending, rotating, or otherwise damaging the tools so we are not comfortable using these as is. I definitely already rotated one of the tools as I was attempting to pull it off of the jig by hand ☹ Let me know!
Thanks!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, May 27, 2026 2:55 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Hi Garrett,
Thanks for the update. You are correct that the set screws are adjustable to account for general tolerances of the toolbank assemblies within the machine. There are set screws for the left, right, and height adjustments. I'd suggest you dial in one and then match all the others; chances are they'll be very close. Let us know if you have any other questions.
Chris
On Wed, May 27, 2026 at 2:50 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
I looked at a few loading jigs, and testing them had some issues. I just found that the screws on either end was obstructing the loading, but I can just twist them more to fit. Each of the jigs have them twisted and sticking out at different lengths though. Is there a specific length they should be? Or should I just size them to slide easily in and out of the tool holders?
Just want to make sure these screws are for any other reason than easy loading/aligning to the tool holder itself 😊. I’ll go through the rest of them either today or tomorrow and let you know if I encounter any more issues.
Once I verify the other jigs are good to go, I’ll send the adapters back and shoot over the tracking number for you.
Thanks!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, May 27, 2026 10:46 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Hi Garrett,
Sorry about that. We do check them for flatness and vacuum seal so it would be best if you can ship them back for RCA and we'll fix it. Hope this doesn't delay your project.
Any issues with the Loading Jigs?
Chris
On Wed, May 27, 2026 at 10:34 AM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Hi Chris,
I went through the rest of the delivery and found 3 more that do not slide all the way into the tool (for a total of 4x). Physically they look similar, but may have some slight warpage issues causing these issues. Any ideas on how to fix this? I’m afraid of trying to bend them to fix the warpage. Would you like me to ship them back for you to take a look?
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Garrett Davidson
Sent: Wednesday, May 27, 2026 8:04 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Sorry, these are two SEPARATE adapters. I’m going through the other adapters now, and will let you know if I see any more issues!
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, May 27, 2026 7:58 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Hi Garrett,
Thanks for the info. My fault on the partially engraved one, I was supposed to let you know but fell behind. We already have a replacement for that one in queue but I wanted to ship all 20 just in case you needed the full qty right away. Is this the same adapter you are having the issue with on the suction cup or is this a different one?
Chris
On Wed, May 27, 2026 at 7:50 AM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Unsure if this sent or if the full email did not send. I received a bunch of error messages.
Please find the video up in the fileXchange if you need!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Garrett Davidson
Sent: Tuesday, May 26, 2026 6:28 PM
To: 'Lorena Carrillo' <lcarrillo@turnpack.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Turnpack, LLC SO26141038' <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Hi Chris/Turnpack,
I started opening up the box, and found an issue with one of the adapters:
As I slide the adapter into our tool, it stops here and does not allow us to slide it all the way to the vacuum port. The adapter itself seemed warped when placed on an optical table. I checked 5 more so far from the latest shipment and they all look good! Just this one is unable to slide in. I attached a video of myself trying to push it it and it not going all the way in without me having to physically lift the adapter into place and have a high risk of “confetti-ing” components in waffle packs. Let me know if it doesn’t come through. I also uploaded into our FileXchange system for you to review. Let me know if anyone needs access to this:
One of the 5 that I looked at after this one is missing most of the writing at the bottom of the adapter itself. Not a huge deal as it’s just cosmetic to us, but did want to let you know about it:
I will go through all the rest tomorrow morning and let you know if I encounter any more like this.
Can I send this one back to you to root cause or any ideas how to fix up? I could try to bend it but unsure how brittle the adapter itself is or if I’ll make it worse.
Thanks!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Garrett Davidson
Sent: Wednesday, May 20, 2026 4:23 PM
To: Lorena Carrillo <lcarrillo@turnpack.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Turnpack, LLC SO26141038' <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Thank you!!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Wednesday, May 20, 2026 4:20 PM
To: 'Christopher Berger' <cberger@turnpack.com>; Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: 'Turnpack, LLC SO26141038' <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Hello Team, the order has shipped complete today. Here is your tracking number for reference. 872056271057
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, May 19, 2026 11:18 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Hi Garrett,
We have the adapters back from anodizing but I slightly underestimated the assembly time. We are wrapping up the assembly today and tomorrow will be for engraving and testing and then we'll ship them out tomorrow.
The toolholder jigs are complete and ready to go.
Thanks
Chris
On Mon, May 18, 2026 at 4:29 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Hey Chris,
Were you able to ship out those parts? And have a tracking number if possible?
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, May 13, 2026 7:55 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Garrett,
We experienced a slight delay because a machine was down, but parts are currently at anodizing. We are expediting that process, and then we anticipate two days for post-anodizing assembly & engraving. We might be able to ship it out Saturday, worst case it'll be Monday. I'll keep you posted when the parts come back from anodizing and then I should be able to confirm actual ship date.
Chris
On Wed, May 13, 2026 at 7:39 AM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Hey Chris,
Just checking if you think you’d be able to ship anything this week?
Thanks!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, April 28, 2026 4:54 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Perfect. Thanks for confirming
On Tue, Apr 28, 2026 at 4:44 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Yeah that’s okay with me!
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, April 28, 2026 4:23 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Garrett,
Yes. Example image below shows one side machined and the top not machined. If we machine all 4 sides they will all look like the side edge in the image below. Also, we did start with the adapters, once they are ready and in case the jigs are not I will let you know and we can do a partial shipment.
Thanks
Chris
On Tue, Apr 28, 2026 at 4:18 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Sorry, what do you mean by “Obscuring them”? would it “fog” the glass or make it not transparent?
The wafer pack adapters are a higher priority for us if possible! But no worries either way.
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, April 28, 2026 3:44 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Hi Garrett,
Making good progress. As of now it looks like we'll ship the order the week of 05/11. We had a question about the tool holder jigs. We would prefer to machine them on multiple sides but doing so would obscure them. Reason being is that the stock material has significant tolerancing, so facing all sides would ensure greater consistency. Any objections to that?
Chris
On Tue, Apr 28, 2026 at 2:54 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Hey Chris,
Hope you are doing well! Do you have an ETA for this order? (PO#3714362)
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Chris Berger <info@turnpack.com>
Sent: Tuesday, April 7, 2026 9:03 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Subject: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Hi Garrett, Attached is the quote for the adapters and loading jigs. Let me know if you need anything else. Chris Christopher Berger Phone: +1 [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏
SO26141038
$ 69,200.00
Expires on 05/07/2026
Hi Garrett,
Attached is the quote for the adapters and loading jigs. Let me know if you need anything else.
Chris
Christopher Berger
Turnpack — Efficiency Redefined Through Automation
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
Dear Customer,
Based on your usage through July 08, 2026 for SRP electric account ***-**9-002 at 22425 S SCOTLAND CT SU 104 your July bill is projected to be approximately $660.00. The bill estimate exceeds the threshold you set in My Account.
If you have questions, please contact us at (602) 236-8833, Monday through Friday, 7 a.m.-5 p.m, or by e-mail at commercl@srpnet.com
Thank you for being a valued SRP business customer.
SRP Customer Services
| Find us on: |
|
|
|
|
Iced or Hot Coffee? Start summer together with the Keurig K-Cafe Barista Bar!
|
Keurig K-Cafe 01
|
Keurig K-Cafe 02
|
Keurig K-Cafe 03
|
Keurig K-Cafe 04
|
Keurig K-Cafe 05
|
Keurig K-Cafe 06
|
Keurig K-Cafe 07
|
Savings Event, Shop All 
|
Product specifications, availability and prices are subject to change without notice. Savings Event: Instant Savings are valid only June 15 - July 19, 2026 at Costco Business Center and CostcoBusinessDelivery.com. A valid Costco membership is required. State law may require sales tax to be charged on the pre-discounted price if the product is subject to sales tax. These taxes, if any, are in addition to the amount you are paying for the product. Quantities are limited. Item limits apply, per member. Instant Savings limited to inventory available from manufacturer. No rain checks will be issued for out of stock items. All Instant Savings are available for delivery unless indicated. Delivery orders must be placed online at CostcoBusinessDelivery.com or SameDay.CostcoBusinessDelivery.com to receive Instant Savings. Savings are not available on Costco.com and may not be combined with any other Instant Savings or coupon. Cigarette items are for resale only. No cash redemption. In the past you provided Costco with your email address info@turnpack.com. Occasionally, you will receive brief advertising announcements regarding special items and services. If you prefer not to receive these advertisements, please click unsubscribe to send an email requesting to be removed. To contact us, please click here. |
Good morning,
Can you please use the attached label for shipping back the PParts today? Let me know if you have any questions about the parts or want to have a quick call this week or early next week.
Thank you!
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Info at Turnpack <info@turnpack.com>
Sent: Tuesday, June 30, 2026 9:58 PM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Cc: Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
|
External Email |
Hi Jeff! Thank you for the update. We do not use UPS only Fedex. Could you please either supply a fedex account or send a label we can use?
Respectfully,
Lorena Carrillo
On Tue, Jun 30, 2026, 9:32 PM Galli, Jeff (US) <Jeff.Galli@teledyne.com> wrote:
Hi All,
The parts went out today. Tracking number: 1Z8563AR0393655535.
I am out of office for the next week so you can have the parts for about a week. If you could please ship back the PParts by the beginning of next week that would be appreciated. The other components can be held onto. Please use UPS 8563AR to return the parts to my attention and the address in my signature. I will have some email if you have any questions or want to hop on a quick call.
Thanks!
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Keith Chalman <keith@cti-rep.com>
Sent: Tuesday, June 30, 2026 10:39 AM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>; Info at Turnpack <info@turnpack.com>
Cc: Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Hi Jeff,
Please send to:
Chris Berger
Turnpack
22425 S Scotland Ct, Suite 104
p: 480-648-4686
c: 480-273-4686
Let us know if there are further questions.
Best Regards,
Keith Chalman
President - Chalman Technologies
c (714) 412-5411
a 3150 E. La Palma Ave. Suite K, Anaheim, CA 92806
Manufacturer's Representative for:
(entire principal list at www.cti-rep.com)
From: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Sent: Tuesday, June 30, 2026 9:51 AM
To: Info at Turnpack <info@turnpack.com>; Keith Chalman <keith@cti-rep.com>
Cc: Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Can you confirm the address to ship the parts? I am trying to get them out today.
Thanks,
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Galli, Jeff (US)
Sent: Thursday, June 18, 2026 9:15 AM
To: Info at Turnpack <info@turnpack.com>; Keith Chalman <keith@cti-rep.com>
Cc: Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Good morning
Yes I have been getting some things ready. Trying to build ahead a bit so we can be down a set of pparts because all the ones we have we use weekly for production. Hoping to be able to send them all next week. The part we will need back within a week or so, the boats and parts can be kept for longer.
Sent from Workspace ONE Boxer
On Jun 17, 2026 4:18 PM, Keith Chalman <keith@cti-rep.com> wrote:
External Email
Hi Jeff,
I just wanted to check in to see if you've had a chance to get us the boats and p-parts question mark.
Let us know.
Keith
From: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Sent: Friday, June 5, 2026 7:57 AM
To: Info at Turnpack <info@turnpack.com>
Cc: Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Hi Chris,
Sounds good. I like the option for magnets or bolts if needed.
Good point about the ID axis. On the current systems there are two indexes because of the length of boats. We have a single index at the main but I know it has always been close.
I will work on getting some parts to sent out to you. I might have some older PParts that aren’t used for production that can be sent, otherwise we would need a quick turnaround on the PParts but the boats and other parts could be held on for longer. I’ll try to get those out next week.
If you have some preliminary designs to show I’d be interested in jumping on another quick call just to see them or if it would help clear up any other issues.
Thanks and hope you have a great weekend!
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Info at Turnpack <info@turnpack.com>
Sent: Thursday, June 4, 2026 4:24 PM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Cc: Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Hi Jeff,
Yes, the plan is to use magnets for the top plates instead of bolts. If you want we can use both magnets and bolts, leaving you the option of whether to use the bolts. The 3 boat designs you provided (Boson, BS8X and Tura) should all operate within the envelope of the machine. One item we flagged is that the center to center distance from the first to the last pocket is just under 12" of travel. Depending on the machine configuration with an ID axis the main axis travel can be limited to 10". Can you confirm that there are no existing travel issues with the boat designs you have provided?
What would be very helpful is to have a physical sample of each boat and part, along with the design files. Ideally, you could send us one p-part set for 1-day so we can review the existing design and prevent surprises.
If it makes sense we could jump on another 30min call to confirm a few things and walk through the models you provided.
Chris
On Tue, Jun 2, 2026 at 10:59 AM Galli, Jeff (US) <Jeff.Galli@teledyne.com> wrote:
Hi Keith and Chris,
For the PParts is it possible to have them in/out with magnets and not have to move the track once the base is set? Were you able to stop the boats in the correct position even with the change in the part and boat sizes? For the boson part we have 2 different board sizes (boats are the same), do you need to take a look at that board as well or we can copy the interface of the PPart we are using now?
If that all looks good I will probably go ahead and order. I’m thinking what we will need is:
1x ID Base
4x Main Base
4x Main insert – Boson
2x Main insert – Tura
2x Main insert - BosonHD
1x ID insert - BosonHD
Thanks,
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Keith Chalman <keith@cti-rep.com>
Sent: Monday, June 1, 2026 3:40 PM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Hi Jeff,
Just checking to see if you have any questions on that quote Chris sent? Attached again here.
Let us know.
Best Regards,
Keith Chalman
President - Chalman Technologies
c (714) 412-5411
a 3150 E. La Palma Ave. Suite K, Anaheim, CA 92806
Manufacturer's Representative for:
From: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Sent: Tuesday, May 26, 2026 6:52 PM
To: Turnpack, LLC SO26201063 <catchall@turnpack.com>; Keith Chalman <keith@cti-rep.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Hi Chris and Keith,
Thanks for the quote. I will review it and organize my thoughts a bit and let you know if I have any questions by the end of the week.
Hope you enjoyed your long weekend!
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: May 14-18
Teledyne Confidential; Commercially Sensitive Business Data
From: Chris Berger <info@turnpack.com>
Sent: Tuesday, May 26, 2026 7:23 AM
To: Jeff Galli <jeff.galli@teledyneflir.com>
Subject: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Hi Jeff, Attached is the quote for the split p-part bonding inserts for the 3 products for 1 machine. Let me know if you have any questions. If [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏
SO26201063
$ 21,150.00
Expires on 06/21/2026
Hi Jeff,
Attached is the quote for the split p-part bonding inserts for the 3 products for 1 machine. Let me know if you have any questions.
If you intend to move forward it would be best if you could send us boats and possibly some parts as well just to make sure clearance is not going to be an issue.
Chris
Christopher Berger
Turnpack — Efficiency Redefined Through Automation
Informed Delivery
|
|||||||||||||||||||||||||||||
|
|
|
|
|
You might also like |
Your opinion matters. Rate this email:
Email Reference ID: [#29f96e49ef6346988f4b0947669cedb3]
Update your email preferences or learn about account protection.
If you have a question, contact us.
eBay Inc., 2025 Hamilton Avenue, San Jose, CA 95125, United States
© 1995-2026 eBay Inc. or its affiliates
|
|
From maverickindustrialsales
You
How many of these do you have?
Get to know maverickindustrialsales |
We scan messages to enforce policies. Only purchases on eBay are covered by the eBay purchase protection programs. Asking your trading partner to complete a transaction outside of eBay is not allowed.
Email Reference ID: [#a11-dxhjvfyhze#]_[#72e7210c695b4595b3c550d30199562e#]
eBay sent this message to Christopher Berger (turnpack). Learn more about account protection. eBay is committed to your privacy. Learn more about our privacy notice and user agreement.
We don't check this mailbox, so please don't reply to this message. If you have a question, go to Help&Contact.
2145 Hamilton Avenue, San Jose, CA 95125
© 1995-2026 eBay Inc. or its affiliates
The Hartford
|
