|
|
|
Dear Customer,
Based on your usage through June 04, 2026 for SRP electric account ***-**9-002 at 22425 S SCOTLAND CT SU 104 your June bill is projected to be approximately $555.00. The bill estimate exceeds the threshold you set in My Account.
If you have questions, please contact us at (602) 236-8833, Monday through Friday, 7 a.m.-5 p.m, or by e-mail at commercl@srpnet.com
Thank you for being a valued SRP business customer.
SRP Customer Services
| Find us on: |
|
|
|
|
Fwd: Contact Request
Hello Ivan,
Great to hear from you again & yes, the pricing is still valid. The only update is that we currently have 741 units (7540 008.001) in stock.
If you’d like to place an order, please complete the following form: https://www.ultracarbide.com/Account/newcustomer We will need a copy of your W-9 and Tax Exempt Certificate.
Initial orders can be processed via credit card (Visa, MasterCard, or Discover). If you choose to apply for terms, we can review your references afterward.
Setting up an account will also give you access to our online portal, where you can check stock, view pricing, and place orders 24/7.
Please let us know if you have any questions.
Thank you,
Eric Smith
Sr. Sales Engineer
Ultra Carbide, LLC.
Novi Office: 248-446-1744
Mobile/Text/WhatsApp: 248-653-4012
eFax: 248-692-0494
Email: eric.smith@ultracarbide.com
Notice: Our German plants will be closed from May 25 until June 8, 2026, for a comprehensive SAP system upgrade. During this period, shipments of new stock and special quotations will be temporarily paused. This upgrade is an important step toward improving efficiency and enhancing service for our customers.
This email/fax and any files transmitted with it are confidential and intended solely for the individual or entity to whom they are addressed. If you have received this email/fax in error, please notify sales@ultracarbide.com.
From: Ivan Arevalo <iarevalo@turnpack.com>
Sent: Friday, June 5, 2026 12:39 PM
To: Eric Smith <Eric.Smith@ultracarbide.com>
Subject: Re: Contact Request
CAUTION: This email originated from outside of Ultra Carbide. DO NOT click on links or open attachments unless you were expecting the email, recognize the sender, and know the content is safe.
Hi Eric,
Deepest apologies for the delayed reply. Is the pricing you provided still valid today?
The length shouldn't be a problem. I had originally thought it would be, but a recent consultation with our engineer revealed longer lengths are not an issue for our manufacturer.
Thank you for your time.
Best,
Ivan
On Fri, May 15, 2026 at 9:14 AM Eric Smith <Eric.Smith@ultracarbide.com> wrote:
Good Afternoon Ivan,
Apologies for the delayed response—I’ve been out of the office for most of the week.
We currently have the following item available in our catalog:
7540 008.001
8.00 mm x 64.20 mm OAL Milling Cutter Blank (Metric Diameter), chamfered on one end, ground to h6 tolerance, DK 460UF (10% Co.), fixed length
- 1,000+ pieces in stock
- $29.77 each (+13% tariff, invoiced as a separate line item)
- Total effective price: $33.64 each
If this overall length does not meet your requirements, we can explore having the blanks cut to size by a grinding partner here in the U.S. (we do not offer in-house cutting or grinding). Alternatively, we can check with the plant on producing them to your specifications from scratch; however, please keep in mind that either option will likely increase the price.
Please let me know how you would like to proceed.
Thank you,
Eric Smith
Sr. Sales Engineer
Ultra Carbide, LLC.
Novi Office: 248-446-1744
Mobile/Text/WhatsApp: 248-653-4012
eFax: 248-692-0494
Email: eric.smith@ultracarbide.com
This email/fax and any files transmitted with it are confidential and intended solely for the individual or entity to whom they are addressed. If you have received this email/fax in error, please notify sales@ultracarbide.com.
From: Ivan Arevalo <iarevalo@turnpack.com>
Sent: Tuesday, May 12, 2026 4:24 PM
To: service@qualitycarbide.com
Cc: Eric Smith <Eric.Smith@ultracarbide.com>
Subject: Re: Contact Request
CAUTION: This email originated from outside of Ultra Carbide. DO NOT click on links or open attachments unless you were expecting the email, recognize the sender, and know the content is safe.
Thank you Michael,
Eric, I'm viewing your site at the moment and I see you have 8mm blank milling rods but not in the lengths that we need. Is there any way we could get them cut to 63.5mm? If so, how would that change the pricing of a quotation?
Thank you for your time,
Ivan
On Tue, May 12, 2026 at 12:41 PM Michael Saad <service@qualitycarbide.com> wrote:
Hi, Ivan.
You would be better served by going to a different type of manufacturer than us for this particular product.
I recommend Ultra-Carbide for this.
Eric Smith is my contact.
eric.smith@ultracarbide.com
Eric is CC'd in this email.
Thank you.
Best Regards,
Michael Saad
------------
President
Quality Carbide Metals, Incorporated
1611 Southport Road, Spartanburg, SC 29306 USA
www.qualitycarbide.com
PH:864-585-3939
-----Original Message-----
From: Quality Carbide <no-reply@qualitycarbide.com>
Sent: Tuesday, May 12, 2026 2:57 PM
To: service@qualitycarbide.com
Subject: Contact Request
Name: Ivan Arevalo
Email: iarevalo@turnpack.com
Subject: RFQ; Blank Carbide Rods
Company: Turnpack
Message:
Hello ! Our company is seeking carbide blanks to be turned into end mills for precision machining.
We ask for 8mm diameter by 63.5mm length round blank rods that are Grade 2210 (10% cobalt), Grounded, h6 tolerance, and chamfered on one end 45 degrees. These should also be made with virgin material. We plan to order a quantity of 130, but if larger quantities (200, 300, 400) can reduce total cost, we would like to see what options are available, thanks.
Disclaimer
The information contained in this communication from the sender is confidential. It is intended solely for use by the recipient and others authorized to receive it. If you are not the recipient, you are hereby notified that any disclosure, copying, distribution or taking action in relation of the contents of this information is strictly prohibited and may be unlawful.
This email has been scanned for viruses and malware, and may have been automatically archived.
Disclaimer
The information contained in this communication from the sender is confidential. It is intended solely for use by the recipient and others authorized to receive it. If you are not the recipient, you are hereby notified that any disclosure, copying, distribution or taking action in relation of the contents of this information is strictly prohibited and may be unlawful.
This email has been scanned for viruses and malware, and may have been automatically archived.
Fwd: New Entry: Contact Form - 1
Mike Zinda
True North Diversified | VP Sales – Prodex / Centennial Carbide
651-246-6536 | https://www.thetruenorthfamily.com/
True North Diversified | We elevate business operations
Hello Ivan,Thanks for the reply.
No worries on the missed call. I figured I was calling a little early.
If you would like to place an order. Please provide all your company information to me. We typically use a credit card for the first order.
Let me know what info you would need from us to get the order going.
Mike Zinda
True North Diversified | VP Sales – Prodex / Centennial Carbide
651-246-6536 | https://www.thetruenorthfamily.com/
True North Diversified | We elevate business operations
From: Ivan Arevalo <iarevalo@turnpack.com>
Sent: Wednesday, June 3, 2026 12:08 PM
To: Mike Zinda <mikez@tndiversified.com>
Cc: Info <info@centennialcarbide.com>
Subject: Re: New Entry: Contact Form - 1Hi Mike,
Thanks for the information. Sorry I missed your call; I wasn't in the office. We're located in Arizona so by the time you called I was barely leaving my house.
I must check with the engineer who created the drawings to see if that 63mm length can work for us.
Once we figure that out, how do we proceed on ordering ?
Thanks,
Ivan
On Wed, Jun 3, 2026 at 7:50 AM Mike Zinda <mikez@tndiversified.com> wrote:Hello Ivan,Please disregard my previous message regarding what you were looking for.
Per my voice message, I have two options for you below:
8mm x 63mm, 10% ground w/chamferQty 100 @ $24.49/eaQty 200 @ $24.04/eaStock
8mm x 63.5mm, 10% ground w/chamferQty 100 @ $38.11/eaQty 200 @ $37.54/eaStock
Please reference quote# Q60326-2
Please let me know if you have any further questions. Looking forward to your response.
Have a great day,Mike Zinda
True North Diversified | VP Sales – Prodex / Centennial Carbide
651-246-6536 | https://www.thetruenorthfamily.com/
True North Diversified | We elevate business operations
From: Mike Zinda <mikez@tndiversified.com>
Sent: Wednesday, June 3, 2026 8:07 AM
To: Info <info@centennialcarbide.com>; iarevalo@turnpack.com <iarevalo@turnpack.com>
Subject: Re: New Entry: Contact Form - 1Good morning, Ivan,I hope the week is treating you well.
We appreciate the opportunity.
Are you just looking for the blank rod?
Best regards,Mike Zinda
True North Diversified | VP Sales – Prodex / Centennial Carbide
651-246-6536 | https://www.thetruenorthfamily.com/
True North Diversified | We elevate business operations
From: Centennial Carbide <info@centennialcarbide.com>
Sent: Tuesday, June 2, 2026 8:09 PM
To: Info <info@centennialcarbide.com>
Subject: New Entry: Contact Form - 1
Diameter: 8 mm
Length: 63.5 mm
Grade: Comparable to Grade 2210 (10% cobalt)
Material: Virgin carbide
Condition: Ground, h6 tolerance
Chamfer: 45° on one end
I have also attached Files of the tooling bit we have these made into, if that is possible on your end.
Let me know if any other info is required, we plan to order between 100-200 of these.
Thanks,
Ivan Arevalo
TurnpackASH08SF.pdf
Sent from Centennial Carbide: Carbide Blanks, Rod and End Mills
FedEx
|
Hi Chris,
Sounds good. I like the option for magnets or bolts if needed.
Good point about the ID axis. On the current systems there are two indexes because of the length of boats. We have a single index at the main but I know it has always been close.
I will work on getting some parts to sent out to you. I might have some older PParts that aren’t used for production that can be sent, otherwise we would need a quick turnaround on the PParts but the boats and other parts could be held on for longer. I’ll try to get those out next week.
If you have some preliminary designs to show I’d be interested in jumping on another quick call just to see them or if it would help clear up any other issues.
Thanks and hope you have a great weekend!
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Info at Turnpack <info@turnpack.com>
Sent: Thursday, June 4, 2026 4:24 PM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Cc: Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Hi Jeff,
Yes, the plan is to use magnets for the top plates instead of bolts. If you want we can use both magnets and bolts, leaving you the option of whether to use the bolts. The 3 boat designs you provided (Boson, BS8X and Tura) should all operate within the envelope of the machine. One item we flagged is that the center to center distance from the first to the last pocket is just under 12" of travel. Depending on the machine configuration with an ID axis the main axis travel can be limited to 10". Can you confirm that there are no existing travel issues with the boat designs you have provided?
What would be very helpful is to have a physical sample of each boat and part, along with the design files. Ideally, you could send us one p-part set for 1-day so we can review the existing design and prevent surprises.
If it makes sense we could jump on another 30min call to confirm a few things and walk through the models you provided.
Chris
On Tue, Jun 2, 2026 at 10:59 AM Galli, Jeff (US) <Jeff.Galli@teledyne.com> wrote:
Hi Keith and Chris,
For the PParts is it possible to have them in/out with magnets and not have to move the track once the base is set? Were you able to stop the boats in the correct position even with the change in the part and boat sizes? For the boson part we have 2 different board sizes (boats are the same), do you need to take a look at that board as well or we can copy the interface of the PPart we are using now?
If that all looks good I will probably go ahead and order. I’m thinking what we will need is:
1x ID Base
4x Main Base
4x Main insert – Boson
2x Main insert – Tura
2x Main insert - BosonHD
1x ID insert - BosonHD
Thanks,
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Keith Chalman <keith@cti-rep.com>
Sent: Monday, June 1, 2026 3:40 PM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Hi Jeff,
Just checking to see if you have any questions on that quote Chris sent? Attached again here.
Let us know.
Best Regards,
Keith Chalman
President - Chalman Technologies
c (714) 412-5411
a 3150 E. La Palma Ave. Suite K, Anaheim, CA 92806
Manufacturer's Representative for:
(entire principal list at www.cti-rep.com)
From: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Sent: Tuesday, May 26, 2026 6:52 PM
To: Turnpack, LLC SO26201063 <catchall@turnpack.com>; Keith Chalman <keith@cti-rep.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Hi Chris and Keith,
Thanks for the quote. I will review it and organize my thoughts a bit and let you know if I have any questions by the end of the week.
Hope you enjoyed your long weekend!
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: May 14-18
Teledyne Confidential; Commercially Sensitive Business Data
From: Chris Berger <info@turnpack.com>
Sent: Tuesday, May 26, 2026 7:23 AM
To: Jeff Galli <jeff.galli@teledyneflir.com>
Subject: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Hi Jeff, Attached is the quote for the split p-part bonding inserts for the 3 products for 1 machine. Let me know if you have any questions. If [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏
SO26201063
$ 21,150.00
Expires on 06/21/2026
Hi Jeff,
Attached is the quote for the split p-part bonding inserts for the 3 products for 1 machine. Let me know if you have any questions.
If you intend to move forward it would be best if you could send us boats and possibly some parts as well just to make sure clearance is not going to be an issue.
Chris
Christopher Berger
Turnpack — Efficiency Redefined Through Automation
Hi Chris,
Sounds good. I like the option for magnets or bolts if needed.
Good point about the ID axis. On the current systems there are two indexes because of the length of boats. We have a single index at the main but I know it has always been close.
I will work on getting some parts to sent out to you. I might have some older PParts that aren’t used for production that can be sent, otherwise we would need a quick turnaround on the PParts but the boats and other parts could be held on for longer. I’ll try to get those out next week.
If you have some preliminary designs to show I’d be interested in jumping on another quick call just to see them or if it would help clear up any other issues.
Thanks and hope you have a great weekend!
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Info at Turnpack <info@turnpack.com>
Sent: Thursday, June 4, 2026 4:24 PM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Cc: Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
|
External Email |
Hi Jeff,
Yes, the plan is to use magnets for the top plates instead of bolts. If you want we can use both magnets and bolts, leaving you the option of whether to use the bolts. The 3 boat designs you provided (Boson, BS8X and Tura) should all operate within the envelope of the machine. One item we flagged is that the center to center distance from the first to the last pocket is just under 12" of travel. Depending on the machine configuration with an ID axis the main axis travel can be limited to 10". Can you confirm that there are no existing travel issues with the boat designs you have provided?
What would be very helpful is to have a physical sample of each boat and part, along with the design files. Ideally, you could send us one p-part set for 1-day so we can review the existing design and prevent surprises.
If it makes sense we could jump on another 30min call to confirm a few things and walk through the models you provided.
Chris
On Tue, Jun 2, 2026 at 10:59 AM Galli, Jeff (US) <Jeff.Galli@teledyne.com> wrote:
Hi Keith and Chris,
For the PParts is it possible to have them in/out with magnets and not have to move the track once the base is set? Were you able to stop the boats in the correct position even with the change in the part and boat sizes? For the boson part we have 2 different board sizes (boats are the same), do you need to take a look at that board as well or we can copy the interface of the PPart we are using now?
If that all looks good I will probably go ahead and order. I’m thinking what we will need is:
1x ID Base
4x Main Base
4x Main insert – Boson
2x Main insert – Tura
2x Main insert - BosonHD
1x ID insert - BosonHD
Thanks,
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: June 18-22, July 1-8
Teledyne Confidential; Commercially Sensitive Business Data
From: Keith Chalman <keith@cti-rep.com>
Sent: Monday, June 1, 2026 3:40 PM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Hi Jeff,
Just checking to see if you have any questions on that quote Chris sent? Attached again here.
Let us know.
Best Regards,
Keith Chalman
President - Chalman Technologies
c (714) 412-5411
a 3150 E. La Palma Ave. Suite K, Anaheim, CA 92806
Manufacturer's Representative for:
(entire principal list at www.cti-rep.com)
From: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Sent: Tuesday, May 26, 2026 6:52 PM
To: Turnpack, LLC SO26201063 <catchall@turnpack.com>; Keith Chalman <keith@cti-rep.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Hi Chris and Keith,
Thanks for the quote. I will review it and organize my thoughts a bit and let you know if I have any questions by the end of the week.
Hope you enjoyed your long weekend!
Jeff Galli
Sr. Process Development Engineer
TELEDYNE FLIR OEM
Upcoming out of office: May 14-18
Teledyne Confidential; Commercially Sensitive Business Data
From: Chris Berger <info@turnpack.com>
Sent: Tuesday, May 26, 2026 7:23 AM
To: Jeff Galli <jeff.galli@teledyneflir.com>
Subject: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
External Email
Hi Jeff, Attached is the quote for the split p-part bonding inserts for the 3 products for 1 machine. Let me know if you have any questions. If [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏
SO26201063
$ 21,150.00
Expires on 06/21/2026
Hi Jeff,
Attached is the quote for the split p-part bonding inserts for the 3 products for 1 machine. Let me know if you have any questions.
If you intend to move forward it would be best if you could send us boats and possibly some parts as well just to make sure clearance is not going to be an issue.
Chris
Christopher Berger
Turnpack — Efficiency Redefined Through Automation
Informed Delivery
|
|||||||||||||||||||||||||||||||||
|
You might also like |
Your opinion matters. Rate this email:
Email Reference ID: [#e124036476fa4974a3646ebd0c80a497]
Update your email preferences or learn about account protection.
If you have a question, contact us.
eBay Inc., 2025 Hamilton Avenue, San Jose, CA 95125, United States
© 1995-2026 eBay Inc. or its affiliates
| ||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
Email Template
|
QuickBooks
|
Pack your bags and jet off… browse Hawaii vacation packages and more with Costco Travel.
|
FedEx
|
Here is the Side Module V2 Electrical Panel quote project number 26398M1.
For Kit: $289.00 each
For Assembled: $401 each
|
|
|
Tony Haynes Technical Sales Representative FLODRAULIC
|
Hi Ivan,
Just a heads up, I don't think we received the order for the two builds.
Best Regards,
Tony Haynes
Technical Sales Representative
FLODRAULIC
Cell 480.997.2852
Fax 480.921.3272
1150 N. FIESTA BLVD. GILBERT, AZ 85233
ISO 9001:2015 Registered
*** Important Notice: Send all Inquiries/Orders to our new Customer Service email address SWSales@flodraulicgroup.com***
From: Ivan Arevalo <iarevalo@turnpack.com>
Sent: Wednesday, May 27, 2026 4:16 PM
To: Tony Haynes <thaynes@flodraulicgroup.com>
Cc: Info at Turnpack <info@turnpack.com>
Subject: Re: RFQTony,
That works for us! I'll get with Lorena on getting these ordered.
Thank you for your time.
Best,Ivan
On Wed, May 27, 2026 at 2:19 PM Tony Haynes <thaynes@flodraulicgroup.com> wrote:
Hi Ivan,
We can square them; quote and lead time are the same. Let me know if that is satisfactory.
Best Regards,
Tony Haynes
Technical Sales Representative
FLODRAULIC
Cell 480.997.2852
Fax 480.921.3272
1150 N. FIESTA BLVD. GILBERT, AZ 85233
ISO 9001:2015 Registered
*** Important Notice: Send all Inquiries/Orders to our new Customer Service email address SWSales@flodraulicgroup.com***
From: Ivan Arevalo <iarevalo@turnpack.com>
Sent: Wednesday, May 27, 2026 9:49 AM
To: Tony Haynes <thaynes@flodraulicgroup.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Christopher Berger <cberger@turnpack.com>; Info at Turnpack <info@turnpack.com>
Subject: Re: RFQ
Hi Tony,
Yes, please square those up so we can get the caps on.
I'll get with Chris and Brandon to determine how we want to move forward.
Thanks,
Ivan
On Tue, May 26, 2026 at 10:57 AM Tony Haynes <thaynes@flodraulicgroup.com> wrote:Hi Ivan,
Here is the Simple Side Module Enclosure quote project number 26359M1 for Turnpack.We aligned the frames and connectors for the simple side module. Please review
Cost for Kit: $2,243.90 each
Cost for Assembled: $2,809.61 each
5-7 Days
Here is the base module top enclosure quote project number 26358M1 for Turnpack.*****The bars you want cover caps on are not square on the end so will not go on.
*****If you want them squared, we can square them up and then add the end caps.
Cost for Kit: $1,012.17 each
Cost for Assembled: $1,272.10 each
5-7 Days
Best Regards,
Tony Haynes
Technical Sales Representative
FLODRAULIC
Cell 480.997.2852
Fax 480.921.3272
1150 N. FIESTA BLVD. GILBERT, AZ 85233
ISO 9001:2015 Registered
*** Important Notice: Send all Inquiries/Orders to our new Customer Service email address SWSales@flodraulicgroup.com***
From: Ivan Arevalo <iarevalo@turnpack.com>
Sent: Thursday, May 21, 2026 5:41 PM
To: Tony Haynes <thaynes@flodraulicgroup.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Christopher Berger <cberger@turnpack.com>; Info at Turnpack <info@turnpack.com>
Subject: RFQ
Hi Tony,
I've attached two .scene files for some extrusions that we would like pricing on below.
The Base Module Top Enclosure should have the flat edge of the 40x80 3E facing outward. In MAYCAD, it shows up red as an error but we just want the slotted sides to be facing inward toward the enclosure. Additionally, I couldn't get the rubber caps onto the ends of the angled top extrusions in MAYCAD, but we want rubber caps on those.
For the Simple Side Module Enclosure, do not quote the two "hurdles" that connect the back of the enclosure and the front 120x40 extrusion. Those are just placeholders to properly render the mating connection points. We also need additional mounting locations along the front extrusion for better support due to the extended length.
Please reach out with any questions or concerns.
Thank you for your assistance.
Best,Ivan
Get all your catering essentials in one stop at Costco Business Center.
|
|
Dear Customer,
Based on your usage through June 03, 2026 for SRP electric account ***-**9-002 at 22425 S SCOTLAND CT SU 104 your June bill is projected to be approximately $540.00. The bill estimate exceeds the threshold you set in My Account.
If you have questions, please contact us at (602) 236-8833, Monday through Friday, 7 a.m.-5 p.m, or by e-mail at commercl@srpnet.com
Thank you for being a valued SRP business customer.
SRP Customer Services
| Find us on: |
|
|
|
|
Please do not respond to this message. This email was sent from an unattended mailbox. This report was generated at approximately 10:57 AM CDT 06/05/2026.
