Info Inbox

Thank you for sending this over to us.

After reviewing the project, we unfortunately won't be able to take it on. The required bend radii are beyond our current capabilities, as we do not have the necessary tooling to produce them.

Hours for shipping and receiving Monday-Friday 7AM-2PM

Hours of operations Monday-Friday 7AM-4PM

Michael Stimens Owner/President   480-987-2466   Michael@azpmm.com   www.azpmm.com

8150 E Germann Rd Suite 136 Mesa Az 85212

---

From: Taylor Dolan <taylor@azpmm.com>
Sent: Sunday, July 12, 2026 9:34 AM
To: Ivan Arevalo <iarevalo@turnpack.com>; Michael Stimens <Michael@azpmm.com>; Info <info@azpmm.com>
Cc: Info at Turnpack <info@turnpack.com>; Christopher Berger <cberger@turnpack.com>
Subject: Re: D4FR_10_A1 RFQ

 

Hi Ivan,

I apologize for the delay. Taylor is no longer with the company. Going forward, please send any emails to info@azpmm.com.

I will look into this and get back with you.

Thanks 

Mike 

---

From: Ivan Arevalo <iarevalo@turnpack.com>
Sent: Thursday, July 9, 2026 2:56 PM
To: Taylor Dolan <taylor@azpmm.com>
Cc: Info at Turnpack <info@turnpack.com>; Christopher Berger <cberger@turnpack.com>
Subject: D4FR_10_A1 RFQ

 

Hi Taylor

I need a quotation for a cover for one of our machines. It'll be made of aluminum and needs to be cut and then bent. 

I've attached the STEP files and drawings for this. If you could let us know the possible turnaround time and cost, it would be greatly appreciated. We just need one. 

Also, the drawing may be updated with some revisions, but for now, we would like a turnaround time based on these current drawings. 

Let me know if you have any questions.

Thanks for your help. 

Best, 

Ivan