2. Listas de correo
  3. Info Inbox
  4. Re: Datacon 2200 training

Archivados

Info Inbox

info@turnpack.com

Re: Datacon 2200 training

Yes, could you please share a proper quote? 

Thanks

From: Info at Turnpack <info@turnpack.com>
Sent: Friday, 11 September 2026 15:29:38
To: Osama Adil Mohammed <omohammed@bannerengineering.com>
Subject: Re: Datacon 2200 training
 
CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.

Hi Osama,

Thanks for reaching out. Yes we can help with the training but we would need to do it at your site. A training class is typically 32hrs/4days and runs at $6500 + travel and lodging. The trainer will either be my colleague Steve or myself and we each have >20+ yrs of Datacon experience across all EVO generations. Let me know if you want a formal quote or need additional info.

Thanks
Chris

On Fri, Sep 11, 2026 at 12:53 PM Osama Adil Mohammed <omohammed@bannerengineering.com> wrote:
Hi, 

I am looking for in-person Besi Datacon 2200 training. The course must include atleast the topics mentioned below. 

Substrate Teaching

Substrate Height Teaching

Multi Module Substrate

Substrate Recognition

Module Recognition

Waffle Pack Carrier Teaching

Waffle Pack Teaching

Component Recognition in the Waffle Pack before Pickup

Component Pickup

Accuracy Mode

Component Placement

Relative Placement

Component Placement Location Teaching

Placement Tool Teaching


Could you please me know what the course would look like and the approx. cost would be? 

Best,
Osama Adil Mohammed
Process Engineer I

The content of this email is confidential and intended for the recipient specified in message only. It is strictly forbidden to share any part of this message with any third party, without a written consent of the sender. If you received this message by mistake, please reply to this message and follow with its deletion, so that we can ensure such a mistake does not occur in the future.
The content of this email is confidential and intended for the recipient specified in message only. It is strictly forbidden to share any part of this message with any third party, without a written consent of the sender. If you received this message by mistake, please reply to this message and follow with its deletion, so that we can ensure such a mistake does not occur in the future.
por "Osama Adil Mohammed" <omohammed@bannerengineering.com> - 04:47 - 11 sep. 2026

Seguimientos

  • Re: Datacon 2200 training
    Hi, Just following up in case you can help me with a quote.

    Best,

    From: Osama Adil Mohammed <omohammed@bannerengineering.com>
    Sent: Friday, 11 September 2026 15:43:28
    To: Info at Turnpack <info@turnpack.com>
    Subject: Re: Datacon 2200 training
     
    Yes, could you please share a proper quote? 

    Thanks

    From: Info at Turnpack <info@turnpack.com>
    Sent: Friday, 11 September 2026 15:29:38
    To: Osama Adil Mohammed <omohammed@bannerengineering.com>
    Subject: Re: Datacon 2200 training
     
    CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.

    Hi Osama,

    Thanks for reaching out. Yes we can help with the training but we would need to do it at your site. A training class is typically 32hrs/4days and runs at $6500 + travel and lodging. The trainer will either be my colleague Steve or myself and we each have >20+ yrs of Datacon experience across all EVO generations. Let me know if you want a formal quote or need additional info.

    Thanks
    Chris

    On Fri, Sep 11, 2026 at 12:53 PM Osama Adil Mohammed <omohammed@bannerengineering.com> wrote:
    Hi, 

    I am looking for in-person Besi Datacon 2200 training. The course must include atleast the topics mentioned below. 

    Substrate Teaching

    Substrate Height Teaching

    Multi Module Substrate

    Substrate Recognition

    Module Recognition

    Waffle Pack Carrier Teaching

    Waffle Pack Teaching

    Component Recognition in the Waffle Pack before Pickup

    Component Pickup

    Accuracy Mode

    Component Placement

    Relative Placement

    Component Placement Location Teaching

    Placement Tool Teaching


    Could you please me know what the course would look like and the approx. cost would be? 

    Best,
    Osama Adil Mohammed
    Process Engineer I

    The content of this email is confidential and intended for the recipient specified in message only. It is strictly forbidden to share any part of this message with any third party, without a written consent of the sender. If you received this message by mistake, please reply to this message and follow with its deletion, so that we can ensure such a mistake does not occur in the future.
    The content of this email is confidential and intended for the recipient specified in message only. It is strictly forbidden to share any part of this message with any third party, without a written consent of the sender. If you received this message by mistake, please reply to this message and follow with its deletion, so that we can ensure such a mistake does not occur in the future.
    por "Osama Adil Mohammed" <omohammed@bannerengineering.com> - 04:31 - 15 sep. 2026

Referencia

  • Datacon 2200 training

    Hi, 

    I am looking for in-person Besi Datacon 2200 training. The course must include atleast the topics mentioned below. 

    Substrate Teaching

    Substrate Height Teaching

    Multi Module Substrate

    Substrate Recognition

    Module Recognition

    Waffle Pack Carrier Teaching

    Waffle Pack Teaching

    Component Recognition in the Waffle Pack before Pickup

    Component Pickup

    Accuracy Mode

    Component Placement

    Relative Placement

    Component Placement Location Teaching

    Placement Tool Teaching


    Could you please me know what the course would look like and the approx. cost would be? 

    Best,
    Osama Adil Mohammed
    Process Engineer I
    Banner Engineering Corp.
    7401 Boone Ave, Minneapolis, MN 55428
    E omohammed@bannerengineering.com C (608) 515 9558

    The content of this email is confidential and intended for the recipient specified in message only. It is strictly forbidden to share any part of this message with any third party, without a written consent of the sender. If you received this message by mistake, please reply to this message and follow with its deletion, so that we can ensure such a mistake does not occur in the future.
    por "Osama Adil Mohammed" <omohammed@bannerengineering.com> - 03:56 - 11 sep. 2026

    1 respuestas 1 respuestas

    • Re: Datacon 2200 training
      Yes, could you please share a proper quote? 

      Thanks

      From: Info at Turnpack <info@turnpack.com>
      Sent: Friday, 11 September 2026 15:29:38
      To: Osama Adil Mohammed <omohammed@bannerengineering.com>
      Subject: Re: Datacon 2200 training
       
      CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.

      Hi Osama,

      Thanks for reaching out. Yes we can help with the training but we would need to do it at your site. A training class is typically 32hrs/4days and runs at $6500 + travel and lodging. The trainer will either be my colleague Steve or myself and we each have >20+ yrs of Datacon experience across all EVO generations. Let me know if you want a formal quote or need additional info.

      Thanks
      Chris

      On Fri, Sep 11, 2026 at 12:53 PM Osama Adil Mohammed <omohammed@bannerengineering.com> wrote:
      Hi, 

      I am looking for in-person Besi Datacon 2200 training. The course must include atleast the topics mentioned below. 

      Substrate Teaching

      Substrate Height Teaching

      Multi Module Substrate

      Substrate Recognition

      Module Recognition

      Waffle Pack Carrier Teaching

      Waffle Pack Teaching

      Component Recognition in the Waffle Pack before Pickup

      Component Pickup

      Accuracy Mode

      Component Placement

      Relative Placement

      Component Placement Location Teaching

      Placement Tool Teaching


      Could you please me know what the course would look like and the approx. cost would be? 

      Best,
      Osama Adil Mohammed
      Process Engineer I

      The content of this email is confidential and intended for the recipient specified in message only. It is strictly forbidden to share any part of this message with any third party, without a written consent of the sender. If you received this message by mistake, please reply to this message and follow with its deletion, so that we can ensure such a mistake does not occur in the future.
      The content of this email is confidential and intended for the recipient specified in message only. It is strictly forbidden to share any part of this message with any third party, without a written consent of the sender. If you received this message by mistake, please reply to this message and follow with its deletion, so that we can ensure such a mistake does not occur in the future.
      por "Osama Adil Mohammed" <omohammed@bannerengineering.com> - 04:47 - 11 sep. 2026

      1 respuestas 1 respuestas

      • Re: Datacon 2200 training
        Hi, Just following up in case you can help me with a quote.

        Best,

        From: Osama Adil Mohammed <omohammed@bannerengineering.com>
        Sent: Friday, 11 September 2026 15:43:28
        To: Info at Turnpack <info@turnpack.com>
        Subject: Re: Datacon 2200 training
         
        Yes, could you please share a proper quote? 

        Thanks

        From: Info at Turnpack <info@turnpack.com>
        Sent: Friday, 11 September 2026 15:29:38
        To: Osama Adil Mohammed <omohammed@bannerengineering.com>
        Subject: Re: Datacon 2200 training
         
        CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.

        Hi Osama,

        Thanks for reaching out. Yes we can help with the training but we would need to do it at your site. A training class is typically 32hrs/4days and runs at $6500 + travel and lodging. The trainer will either be my colleague Steve or myself and we each have >20+ yrs of Datacon experience across all EVO generations. Let me know if you want a formal quote or need additional info.

        Thanks
        Chris

        On Fri, Sep 11, 2026 at 12:53 PM Osama Adil Mohammed <omohammed@bannerengineering.com> wrote:
        Hi, 

        I am looking for in-person Besi Datacon 2200 training. The course must include atleast the topics mentioned below. 

        Substrate Teaching

        Substrate Height Teaching

        Multi Module Substrate

        Substrate Recognition

        Module Recognition

        Waffle Pack Carrier Teaching

        Waffle Pack Teaching

        Component Recognition in the Waffle Pack before Pickup

        Component Pickup

        Accuracy Mode

        Component Placement

        Relative Placement

        Component Placement Location Teaching

        Placement Tool Teaching


        Could you please me know what the course would look like and the approx. cost would be? 

        Best,
        Osama Adil Mohammed
        Process Engineer I

        The content of this email is confidential and intended for the recipient specified in message only. It is strictly forbidden to share any part of this message with any third party, without a written consent of the sender. If you received this message by mistake, please reply to this message and follow with its deletion, so that we can ensure such a mistake does not occur in the future.
        The content of this email is confidential and intended for the recipient specified in message only. It is strictly forbidden to share any part of this message with any third party, without a written consent of the sender. If you received this message by mistake, please reply to this message and follow with its deletion, so that we can ensure such a mistake does not occur in the future.
        por "Osama Adil Mohammed" <omohammed@bannerengineering.com> - 04:31 - 15 sep. 2026