Archivados
Info Inbox
info@turnpack.com
RE: EXT :RE: Quote Request
Hi Lorena,
Do you have the quote for below?
-Andrew
From: Fletcher, Andrew C [US] (MS)
Sent: Friday, September 18, 2026 8:55 AM
To: 'Turnpack LLC' <info@turnpack.com>
Cc: Litchfield, Zach [US] (MS) <Zachary.Litchfield@ngc.com>
Subject: RE: EXT :RE: Quote Request
Hey Lorena,
Do you think you can get us a quote by the end of the day?
-Andrew
From: Turnpack LLC <info@turnpack.com>
Sent: Wednesday, September 16, 2026 12:38 PM
To: Fletcher, Andrew C [US] (MS) <Andrew.Fletcher@ngc.com>
Cc: Litchfield, Zach [US] (MS) <Zachary.Litchfield@ngc.com>
Subject: EXT :RE: Quote Request
|
External Email Alert |
|
This email has been sent from outside of the Northrop Grumman network. Do not click links, download attachments or reply unless you trust the sender. |
Hellow NGC Team!
Armineh has been since retired for a few years now and George has retired into a contractor position. Turnpack LLC now how Midas Technology.
I will work on a quote and send it shortly.
To answer your question, this is George’s advice.
To address the slipping issue, the solution requires simply removing the set screw located on the top and drilling a shallow hole. This modification would allow the set screw to function more like a pin, effectively preventing any further slipping.
Let me know if you need any adjustments!
Lorena Carrillo
Office Manager
Office: 480-331-1878
Direct Line: 781-938-0069
NEW ADDRESS:
6922 Via Northgate Ste 101, Mesa, AZ 85212
lcarrillo@turnpack.com | www.turnpack.com
https://www.turnpack.com/midas-rework/delidder
From: Fletcher, Andrew C [US] (MS) <Andrew.Fletcher@ngc.com>
Sent: Wednesday, September 16, 2026 7:51 AM
To: astepanian@midastechnology.com; George Bloom <gbloom@midastechnology.com>
Cc: Litchfield, Zach [US] (MS) <Zachary.Litchfield@ngc.com>
Subject: RE: Quote Request
Adding George.
George – Do you have any advice for the joint below (circled in yellow) slipping? The set screw doesn’t hold enough when we apply downward pressure for some of the really thin components we work on.
From: Fletcher, Andrew C [US] (MS)
Sent: Wednesday, September 16, 2026 9:02 AM
To: astepanian@midastechnology.com
Cc: Litchfield, Zach [US] (MS) <Zachary.Litchfield@ngc.com>
Subject: Quote Request
Hey Armineh,
Can you quote Qty. 4 of the shear arm assembly pictured below?
Andrew Fletcher | Staff Chief Engineer
Northrop Grumman Corporation | Mission Systems
O: 410-765-8185 | Andrew.Fletcher@ngc.com
por Andrew Fletcher - 09:26 - 23 sep. 2026
Referencia
-
RE: EXT :RE: Quote Request
Hey Lorena,
Do you think you can get us a quote by the end of the day?
-Andrew
From: Turnpack LLC <info@turnpack.com>
Sent: Wednesday, September 16, 2026 12:38 PM
To: Fletcher, Andrew C [US] (MS) <Andrew.Fletcher@ngc.com>
Cc: Litchfield, Zach [US] (MS) <Zachary.Litchfield@ngc.com>
Subject: EXT :RE: Quote RequestExternal Email Alert
This email has been sent from outside of the Northrop Grumman network. Do not click links, download attachments or reply unless you trust the sender.
Hellow NGC Team!
Armineh has been since retired for a few years now and George has retired into a contractor position. Turnpack LLC now how Midas Technology.
I will work on a quote and send it shortly.
To answer your question, this is George’s advice.
To address the slipping issue, the solution requires simply removing the set screw located on the top and drilling a shallow hole. This modification would allow the set screw to function more like a pin, effectively preventing any further slipping.
Let me know if you need any adjustments!
Lorena Carrillo
Office Manager
Office: 480-331-1878
Direct Line: 781-938-0069
NEW ADDRESS: 6922 Via Northgate Ste 101, Mesa, AZ 85212lcarrillo@turnpack.com | www.turnpack.com
https://www.turnpack.com/midas-rework/delidderFrom: Fletcher, Andrew C [US] (MS) <Andrew.Fletcher@ngc.com>
Sent: Wednesday, September 16, 2026 7:51 AM
To: astepanian@midastechnology.com; George Bloom <gbloom@midastechnology.com>
Cc: Litchfield, Zach [US] (MS) <Zachary.Litchfield@ngc.com>
Subject: RE: Quote RequestAdding George.
George – Do you have any advice for the joint below (circled in yellow) slipping? The set screw doesn’t hold enough when we apply downward pressure for some of the really thin components we work on.
From: Fletcher, Andrew C [US] (MS)
Sent: Wednesday, September 16, 2026 9:02 AM
To: astepanian@midastechnology.com
Cc: Litchfield, Zach [US] (MS) <Zachary.Litchfield@ngc.com>
Subject: Quote RequestHey Armineh,
Can you quote Qty. 4 of the shear arm assembly pictured below?
Andrew Fletcher | Staff Chief Engineer
Northrop Grumman Corporation | Mission Systems
O: 410-765-8185 | Andrew.Fletcher@ngc.com
por Andrew Fletcher - 08:56 - 18 sep. 2026-
RE: EXT :RE: Quote Request
Hi Lorena,
Do you have the quote for below?
-Andrew
From: Fletcher, Andrew C [US] (MS)
Sent: Friday, September 18, 2026 8:55 AM
To: 'Turnpack LLC' <info@turnpack.com>
Cc: Litchfield, Zach [US] (MS) <Zachary.Litchfield@ngc.com>
Subject: RE: EXT :RE: Quote RequestHey Lorena,
Do you think you can get us a quote by the end of the day?
-Andrew
From: Turnpack LLC <info@turnpack.com>
Sent: Wednesday, September 16, 2026 12:38 PM
To: Fletcher, Andrew C [US] (MS) <Andrew.Fletcher@ngc.com>
Cc: Litchfield, Zach [US] (MS) <Zachary.Litchfield@ngc.com>
Subject: EXT :RE: Quote RequestExternal Email Alert
This email has been sent from outside of the Northrop Grumman network. Do not click links, download attachments or reply unless you trust the sender.
Hellow NGC Team!
Armineh has been since retired for a few years now and George has retired into a contractor position. Turnpack LLC now how Midas Technology.
I will work on a quote and send it shortly.
To answer your question, this is George’s advice.
To address the slipping issue, the solution requires simply removing the set screw located on the top and drilling a shallow hole. This modification would allow the set screw to function more like a pin, effectively preventing any further slipping.
Let me know if you need any adjustments!
Lorena Carrillo
Office Manager
Office: 480-331-1878
Direct Line: 781-938-0069
NEW ADDRESS: 6922 Via Northgate Ste 101, Mesa, AZ 85212lcarrillo@turnpack.com | www.turnpack.com
https://www.turnpack.com/midas-rework/delidderFrom: Fletcher, Andrew C [US] (MS) <Andrew.Fletcher@ngc.com>
Sent: Wednesday, September 16, 2026 7:51 AM
To: astepanian@midastechnology.com; George Bloom <gbloom@midastechnology.com>
Cc: Litchfield, Zach [US] (MS) <Zachary.Litchfield@ngc.com>
Subject: RE: Quote RequestAdding George.
George – Do you have any advice for the joint below (circled in yellow) slipping? The set screw doesn’t hold enough when we apply downward pressure for some of the really thin components we work on.
From: Fletcher, Andrew C [US] (MS)
Sent: Wednesday, September 16, 2026 9:02 AM
To: astepanian@midastechnology.com
Cc: Litchfield, Zach [US] (MS) <Zachary.Litchfield@ngc.com>
Subject: Quote RequestHey Armineh,
Can you quote Qty. 4 of the shear arm assembly pictured below?
Andrew Fletcher | Staff Chief Engineer
Northrop Grumman Corporation | Mission Systems
O: 410-765-8185 | Andrew.Fletcher@ngc.com
por Andrew Fletcher - 09:26 - 23 sep. 2026
-
