Archivados
Info Inbox
info@turnpack.com
Re: part
- WH CONTROL KNOB H4WHKN: This is our older design. We can provide parts or you can send the workholder to us for an upgrade to the H5WHKN which is a more robust design. The part cost is about the same but the upgrade requires about three hours of labor.
- Heaters and Thermocouple Assembly: Judging by your pictures, are you asking for a quote for the stage heater harness and not the jet heaters? If it's the heater harness, shipping us the workholder would allow us to replace it, test it and perform the control knob upgrade as well.
Any info on these parts?
From: info@turnpack.com <info@turnpack.com>
Sent: Tuesday, April 7, 2026 3:57 PM
To: Blewett, Tim <blewett@ddc-web.com>
Cc: 'Christopher Berger' <cberger@turnpack.com>
Subject: RE: part
!! Caution: External Sender !! Do not click links or open attachments unless you verify the sender.
Engineering is working on all the request. Some will get back to you later today.
Here are the requests that we have just to ensure we are on the same page.
- Heaters
- thermocouple assembly
- button for the vacuum release
- switch on the stage for the vacuum
- knob with the button on the stage
From: Blewett, Tim <blewett@ddc-web.com>
Sent: Tuesday, April 7, 2026 10:23 AM
To: info@turnpack.com
Subject: RE: part
Any luck getting any info about the switch?
Tim
From: Blewett, Tim
Sent: Tuesday, March 31, 2026 2:43 PM
To: info@turnpack.com
Subject: RE: part
From: info@turnpack.com <info@turnpack.com>
Sent: Tuesday, March 31, 2026 2:39 PM
To: Blewett, Tim <blewett@ddc-web.com>
Subject: RE: part
!! Caution: External Sender !! Do not click links or open attachments unless you verify the sender.
Do you have a photo or see a part number on it somewhere?
From: Blewett, Tim <blewett@ddc-web.com>
Sent: Tuesday, March 31, 2026 10:38 AM
To: info@turnpack.com
Subject: part
Good afternoon,
We have a HGRS-V and looking for the knob with the button on the stage
Thank you,
Timothy P. Blewett
Facilities Technician Sr.
Data Device Corporation
T: 631-567-5600 ext 7444
Your solution provider... for Connectivity, Power, and Control
Notice: This e-mail and any files transmitted with it may contain Data Device Corporation's and its subsidiaries privileged and proprietary information. It is intended solely for the use of the individual or entity to whom it is addressed. If you are not the named recipient of this transmission, any disclosure, copying, distribution or reliance on the contents of this message is prohibited. If you received this e-mail in error, please destroy it and any attached files and notify me immediately.
Click Here to view our privacy statement.
por Chris Berger - 03:07 - 15 abr. 2026
Seguimientos
-
RE: part
Yes this is correct
From: info@turnpack.com <info@turnpack.com>
Sent: Tuesday, April 21, 2026 12:57 PM
To: 'Christopher Berger' <cberger@turnpack.com>
Cc: Blewett, Tim <blewett@ddc-web.com>
Subject: RE: part!! Caution: External Sender !! Do not click links or open attachments unless you verify the sender.
Hi Tim, please see inquiry below.
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, April 15, 2026 12:02 PMHi Tim,
Apologies; the team was waiting on me for this. I just got back from back-to-back service calls but we'll get the quote out today. I just want to confirm I have everything straight:
-
WH CONTROL KNOB H4WHKN: This is our older design. We can provide parts or you can send the workholder to us for an upgrade to the H5WHKN which is a more robust design. The part cost is about the same but the upgrade
requires about three hours of labor.
- Heaters and Thermocouple Assembly: Judging by your pictures, are you asking for a quote for the stage heater harness and not the jet heaters? If it's the heater harness, shipping us the workholder would allow us to replace it, test it and perform the control knob upgrade as well.
Let me know how you'd like to proceed and I'll get the quote over to you.
Chris
On Wed, Apr 15, 2026 at 8:21 AM Blewett, Tim <info@turnpack.com> wrote:
Any info on these parts?
From: info@turnpack.com <info@turnpack.com>
Sent: Tuesday, April 7, 2026 3:57 PM
To: Blewett, Tim <blewett@ddc-web.com>
Cc: 'Christopher Berger' <cberger@turnpack.com>
Subject: RE: part!! Caution: External Sender !! Do not click links or open attachments unless you verify the sender.
Engineering is working on all the request. Some will get back to you later today.
Here are the requests that we have just to ensure we are on the same page.
- Heaters
- thermocouple assembly
- button for the vacuum release
- switch on the stage for the vacuum
- knob with the button on the stage
From: Blewett, Tim <blewett@ddc-web.com>
Sent: Tuesday, April 7, 2026 10:23 AM
To: info@turnpack.com
Subject: RE: partAny luck getting any info about the switch?
Tim
From: Blewett, Tim
Sent: Tuesday, March 31, 2026 2:43 PM
To: info@turnpack.com
Subject: RE: partFrom: info@turnpack.com <info@turnpack.com>
Sent: Tuesday, March 31, 2026 2:39 PM
To: Blewett, Tim <blewett@ddc-web.com>
Subject: RE: part!! Caution: External Sender !! Do not click links or open attachments unless you verify the sender.
Do you have a photo or see a part number on it somewhere?
From: Blewett, Tim <blewett@ddc-web.com>
Sent: Tuesday, March 31, 2026 10:38 AM
To: info@turnpack.com
Subject: partGood afternoon,
We have a HGRS-V and looking for the knob with the button on the stage
Thank you,
Timothy P. Blewett
Facilities Technician Sr.
Data Device Corporation
T: 631-567-5600 ext 7444
Your solution provider... for Connectivity, Power, and Control
Notice: This e-mail and any files transmitted with it may contain Data Device Corporation's and its subsidiaries privileged and proprietary information. It is intended solely for the use of the individual or entity to whom it is addressed. If you are not the named recipient of this transmission, any disclosure, copying, distribution or reliance on the contents of this message is prohibited. If you received this e-mail in error, please destroy it and any attached files and notify me immediately.
Click Here to view our privacy statement.
--
Christopher Berger
por Tim Blewett - 02:16 - 21 abr. 2026-
RE: part
What would be the turn around if you would do it
From: info@turnpack.com <info@turnpack.com>
Sent: Tuesday, April 21, 2026 2:31 PM
To: Blewett, Tim <blewett@ddc-web.com>
Subject: RE: part!! Caution: External Sender !! Do not click links or open attachments unless you verify the sender.
Okay great. Would you like to repair the heaers yourself or would you prefer we handle it?
From: Blewett, Tim <blewett@ddc-web.com>
Sent: Tuesday, April 21, 2026 11:15 AM
To: info@turnpack.com
Subject: RE: partYes this is correct
From: info@turnpack.com <info@turnpack.com>
Sent: Tuesday, April 21, 2026 12:57 PM
To: 'Christopher Berger' <cberger@turnpack.com>
Cc: Blewett, Tim <blewett@ddc-web.com>
Subject: RE: part!! Caution: External Sender !! Do not click links or open attachments unless you verify the sender.
Hi Tim, please see inquiry below.
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, April 15, 2026 12:02 PMHi Tim,
Apologies; the team was waiting on me for this. I just got back from back-to-back service calls but we'll get the quote out today. I just want to confirm I have everything straight:
-
WH CONTROL KNOB H4WHKN: This is our older design. We can provide parts or you can send the workholder to us for an upgrade to the H5WHKN which is a more robust design. The part cost is about the same but the upgrade
requires about three hours of labor.
- Heaters and Thermocouple Assembly: Judging by your pictures, are you asking for a quote for the stage heater harness and not the jet heaters? If it's the heater harness, shipping us the workholder would allow us to replace it, test it and perform the control knob upgrade as well.
Let me know how you'd like to proceed and I'll get the quote over to you.
Chris
On Wed, Apr 15, 2026 at 8:21 AM Blewett, Tim <info@turnpack.com> wrote:
Any info on these parts?
From: info@turnpack.com <info@turnpack.com>
Sent: Tuesday, April 7, 2026 3:57 PM
To: Blewett, Tim <blewett@ddc-web.com>
Cc: 'Christopher Berger' <cberger@turnpack.com>
Subject: RE: part!! Caution: External Sender !! Do not click links or open attachments unless you verify the sender.
Engineering is working on all the request. Some will get back to you later today.
Here are the requests that we have just to ensure we are on the same page.
- Heaters
- thermocouple assembly
- button for the vacuum release
- switch on the stage for the vacuum
- knob with the button on the stage
From: Blewett, Tim <blewett@ddc-web.com>
Sent: Tuesday, April 7, 2026 10:23 AM
To: info@turnpack.com
Subject: RE: partAny luck getting any info about the switch?
Tim
From: Blewett, Tim
Sent: Tuesday, March 31, 2026 2:43 PM
To: info@turnpack.com
Subject: RE: partFrom: info@turnpack.com <info@turnpack.com>
Sent: Tuesday, March 31, 2026 2:39 PM
To: Blewett, Tim <blewett@ddc-web.com>
Subject: RE: part!! Caution: External Sender !! Do not click links or open attachments unless you verify the sender.
Do you have a photo or see a part number on it somewhere?
From: Blewett, Tim <blewett@ddc-web.com>
Sent: Tuesday, March 31, 2026 10:38 AM
To: info@turnpack.com
Subject: partGood afternoon,
We have a HGRS-V and looking for the knob with the button on the stage
Thank you,
Timothy P. Blewett
Facilities Technician Sr.
Data Device Corporation
T: 631-567-5600 ext 7444
Your solution provider... for Connectivity, Power, and Control
Notice: This e-mail and any files transmitted with it may contain Data Device Corporation's and its subsidiaries privileged and proprietary information. It is intended solely for the use of the individual or entity to whom it is addressed. If you are not the named recipient of this transmission, any disclosure, copying, distribution or reliance on the contents of this message is prohibited. If you received this e-mail in error, please destroy it and any attached files and notify me immediately.
Click Here to view our privacy statement.
--
Christopher Berger
por Tim Blewett - 03:01 - 21 abr. 2026-
RE: part
Any progress on getting a quote for the parts?
From: info@turnpack.com <info@turnpack.com>
Sent: Tuesday, April 21, 2026 4:00 PM
To: Blewett, Tim <blewett@ddc-web.com>
Cc: Gull, James <James.Gull@powerdevicecorp.com>
Subject: RE: part!! Caution: External Sender !! Do not click links or open attachments unless you verify the sender.
Hi Tim, including James as I believe he called regarding the hot gas.
It would be about 2 weeks for repairs once we have the parts in.
From: Blewett, Tim <blewett@ddc-web.com>
Sent: Tuesday, April 21, 2026 12:01 PM
To: info@turnpack.com
Subject: RE: partWhat would be the turn around if you would do it
From: info@turnpack.com <info@turnpack.com>
Sent: Tuesday, April 21, 2026 2:31 PM
To: Blewett, Tim <blewett@ddc-web.com>
Subject: RE: part!! Caution: External Sender !! Do not click links or open attachments unless you verify the sender.
Okay great. Would you like to repair the heaers yourself or would you prefer we handle it?
From: Blewett, Tim <blewett@ddc-web.com>
Sent: Tuesday, April 21, 2026 11:15 AM
To: info@turnpack.com
Subject: RE: partYes this is correct
From: info@turnpack.com <info@turnpack.com>
Sent: Tuesday, April 21, 2026 12:57 PM
To: 'Christopher Berger' <cberger@turnpack.com>
Cc: Blewett, Tim <blewett@ddc-web.com>
Subject: RE: part!! Caution: External Sender !! Do not click links or open attachments unless you verify the sender.
Hi Tim, please see inquiry below.
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, April 15, 2026 12:02 PMHi Tim,
Apologies; the team was waiting on me for this. I just got back from back-to-back service calls but we'll get the quote out today. I just want to confirm I have everything straight:
-
WH CONTROL KNOB H4WHKN: This is our older design. We can provide parts or you can send the workholder to us for an upgrade to the H5WHKN which is a more robust design. The part cost is about the same but the upgrade
requires about three hours of labor.
- Heaters and Thermocouple Assembly: Judging by your pictures, are you asking for a quote for the stage heater harness and not the jet heaters? If it's the heater harness, shipping us the workholder would allow us to replace it, test it and perform the control knob upgrade as well.
Let me know how you'd like to proceed and I'll get the quote over to you.
Chris
On Wed, Apr 15, 2026 at 8:21 AM Blewett, Tim <info@turnpack.com> wrote:
Any info on these parts?
From: info@turnpack.com <info@turnpack.com>
Sent: Tuesday, April 7, 2026 3:57 PM
To: Blewett, Tim <blewett@ddc-web.com>
Cc: 'Christopher Berger' <cberger@turnpack.com>
Subject: RE: part!! Caution: External Sender !! Do not click links or open attachments unless you verify the sender.
Engineering is working on all the request. Some will get back to you later today.
Here are the requests that we have just to ensure we are on the same page.
- Heaters
- thermocouple assembly
- button for the vacuum release
- switch on the stage for the vacuum
- knob with the button on the stage
From: Blewett, Tim <blewett@ddc-web.com>
Sent: Tuesday, April 7, 2026 10:23 AM
To: info@turnpack.com
Subject: RE: partAny luck getting any info about the switch?
Tim
From: Blewett, Tim
Sent: Tuesday, March 31, 2026 2:43 PM
To: info@turnpack.com
Subject: RE: partFrom: info@turnpack.com <info@turnpack.com>
Sent: Tuesday, March 31, 2026 2:39 PM
To: Blewett, Tim <blewett@ddc-web.com>
Subject: RE: part!! Caution: External Sender !! Do not click links or open attachments unless you verify the sender.
Do you have a photo or see a part number on it somewhere?
From: Blewett, Tim <blewett@ddc-web.com>
Sent: Tuesday, March 31, 2026 10:38 AM
To: info@turnpack.com
Subject: partGood afternoon,
We have a HGRS-V and looking for the knob with the button on the stage
Thank you,
Timothy P. Blewett
Facilities Technician Sr.
Data Device Corporation
T: 631-567-5600 ext 7444
Your solution provider... for Connectivity, Power, and Control
Notice: This e-mail and any files transmitted with it may contain Data Device Corporation's and its subsidiaries privileged and proprietary information. It is intended solely for the use of the individual or entity to whom it is addressed. If you are not the named recipient of this transmission, any disclosure, copying, distribution or reliance on the contents of this message is prohibited. If you received this e-mail in error, please destroy it and any attached files and notify me immediately.
Click Here to view our privacy statement.
--
Christopher Berger
por Tim Blewett - 11:32 - 28 abr. 2026 -
WH CONTROL KNOB H4WHKN: This is our older design. We can provide parts or you can send the workholder to us for an upgrade to the H5WHKN which is a more robust design. The part cost is about the same but the upgrade
requires about three hours of labor.
-
RE: part
Can you give me a quote for the parts that I need for the table.
Thank you,
Tim
From: info@turnpack.com <info@turnpack.com>
Sent: Tuesday, April 21, 2026 4:00 PM
To: Blewett, Tim <blewett@ddc-web.com>
Cc: Gull, James <James.Gull@powerdevicecorp.com>
Subject: RE: part!! Caution: External Sender !! Do not click links or open attachments unless you verify the sender.
Hi Tim, including James as I believe he called regarding the hot gas.
It would be about 2 weeks for repairs once we have the parts in.
From: Blewett, Tim <blewett@ddc-web.com>
Sent: Tuesday, April 21, 2026 12:01 PM
To: info@turnpack.com
Subject: RE: partWhat would be the turn around if you would do it
From: info@turnpack.com <info@turnpack.com>
Sent: Tuesday, April 21, 2026 2:31 PM
To: Blewett, Tim <blewett@ddc-web.com>
Subject: RE: part!! Caution: External Sender !! Do not click links or open attachments unless you verify the sender.
Okay great. Would you like to repair the heaers yourself or would you prefer we handle it?
From: Blewett, Tim <blewett@ddc-web.com>
Sent: Tuesday, April 21, 2026 11:15 AM
To: info@turnpack.com
Subject: RE: partYes this is correct
From: info@turnpack.com <info@turnpack.com>
Sent: Tuesday, April 21, 2026 12:57 PM
To: 'Christopher Berger' <cberger@turnpack.com>
Cc: Blewett, Tim <blewett@ddc-web.com>
Subject: RE: part!! Caution: External Sender !! Do not click links or open attachments unless you verify the sender.
Hi Tim, please see inquiry below.
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, April 15, 2026 12:02 PMHi Tim,
Apologies; the team was waiting on me for this. I just got back from back-to-back service calls but we'll get the quote out today. I just want to confirm I have everything straight:
-
WH CONTROL KNOB H4WHKN: This is our older design. We can provide parts or you can send the workholder to us for an upgrade to the H5WHKN which is a more robust design. The part cost is about the same but the upgrade
requires about three hours of labor.
- Heaters and Thermocouple Assembly: Judging by your pictures, are you asking for a quote for the stage heater harness and not the jet heaters? If it's the heater harness, shipping us the workholder would allow us to replace it, test it and perform the control knob upgrade as well.
Let me know how you'd like to proceed and I'll get the quote over to you.
Chris
On Wed, Apr 15, 2026 at 8:21 AM Blewett, Tim <info@turnpack.com> wrote:
Any info on these parts?
From: info@turnpack.com <info@turnpack.com>
Sent: Tuesday, April 7, 2026 3:57 PM
To: Blewett, Tim <blewett@ddc-web.com>
Cc: 'Christopher Berger' <cberger@turnpack.com>
Subject: RE: part!! Caution: External Sender !! Do not click links or open attachments unless you verify the sender.
Engineering is working on all the request. Some will get back to you later today.
Here are the requests that we have just to ensure we are on the same page.
- Heaters
- thermocouple assembly
- button for the vacuum release
- switch on the stage for the vacuum
- knob with the button on the stage
From: Blewett, Tim <blewett@ddc-web.com>
Sent: Tuesday, April 7, 2026 10:23 AM
To: info@turnpack.com
Subject: RE: partAny luck getting any info about the switch?
Tim
From: Blewett, Tim
Sent: Tuesday, March 31, 2026 2:43 PM
To: info@turnpack.com
Subject: RE: partFrom: info@turnpack.com <info@turnpack.com>
Sent: Tuesday, March 31, 2026 2:39 PM
To: Blewett, Tim <blewett@ddc-web.com>
Subject: RE: part!! Caution: External Sender !! Do not click links or open attachments unless you verify the sender.
Do you have a photo or see a part number on it somewhere?
From: Blewett, Tim <blewett@ddc-web.com>
Sent: Tuesday, March 31, 2026 10:38 AM
To: info@turnpack.com
Subject: partGood afternoon,
We have a HGRS-V and looking for the knob with the button on the stage
Thank you,
Timothy P. Blewett
Facilities Technician Sr.
Data Device Corporation
T: 631-567-5600 ext 7444
Your solution provider... for Connectivity, Power, and Control
Notice: This e-mail and any files transmitted with it may contain Data Device Corporation's and its subsidiaries privileged and proprietary information. It is intended solely for the use of the individual or entity to whom it is addressed. If you are not the named recipient of this transmission, any disclosure, copying, distribution or reliance on the contents of this message is prohibited. If you received this e-mail in error, please destroy it and any attached files and notify me immediately.
Click Here to view our privacy statement.
--
Christopher Berger
por Tim Blewett - 07:12 - 22 abr. 2026 -
WH CONTROL KNOB H4WHKN: This is our older design. We can provide parts or you can send the workholder to us for an upgrade to the H5WHKN which is a more robust design. The part cost is about the same but the upgrade
requires about three hours of labor.
-
WH CONTROL KNOB H4WHKN: This is our older design. We can provide parts or you can send the workholder to us for an upgrade to the H5WHKN which is a more robust design. The part cost is about the same but the upgrade
requires about three hours of labor.
-
WH CONTROL KNOB H4WHKN: This is our older design. We can provide parts or you can send the workholder to us for an upgrade to the H5WHKN which is a more robust design. The part cost is about the same but the upgrade
requires about three hours of labor.
Referencia
-
RE: part
Any info on these parts?
From: info@turnpack.com <info@turnpack.com>
Sent: Tuesday, April 7, 2026 3:57 PM
To: Blewett, Tim <blewett@ddc-web.com>
Cc: 'Christopher Berger' <cberger@turnpack.com>
Subject: RE: part!! Caution: External Sender !! Do not click links or open attachments unless you verify the sender.
Engineering is working on all the request. Some will get back to you later today.
Here are the requests that we have just to ensure we are on the same page.
- Heaters
- thermocouple assembly
- button for the vacuum release
- switch on the stage for the vacuum
- knob with the button on the stage
From: Blewett, Tim <blewett@ddc-web.com>
Sent: Tuesday, April 7, 2026 10:23 AM
To: info@turnpack.com
Subject: RE: partAny luck getting any info about the switch?
Tim
From: Blewett, Tim
Sent: Tuesday, March 31, 2026 2:43 PM
To: info@turnpack.com
Subject: RE: partFrom: info@turnpack.com <info@turnpack.com>
Sent: Tuesday, March 31, 2026 2:39 PM
To: Blewett, Tim <blewett@ddc-web.com>
Subject: RE: part!! Caution: External Sender !! Do not click links or open attachments unless you verify the sender.
Do you have a photo or see a part number on it somewhere?
From: Blewett, Tim <blewett@ddc-web.com>
Sent: Tuesday, March 31, 2026 10:38 AM
To: info@turnpack.com
Subject: partGood afternoon,
We have a HGRS-V and looking for the knob with the button on the stage
Thank you,
Timothy P. Blewett
Facilities Technician Sr.
Data Device Corporation
T: 631-567-5600 ext 7444
Your solution provider... for Connectivity, Power, and Control
Notice: This e-mail and any files transmitted with it may contain Data Device Corporation's and its subsidiaries privileged and proprietary information. It is intended solely for the use of the individual or entity to whom it is addressed. If you are not the named recipient of this transmission, any disclosure, copying, distribution or reliance on the contents of this message is prohibited. If you received this e-mail in error, please destroy it and any attached files and notify me immediately.
Click Here to view our privacy statement.
por Tim Blewett - 11:13 - 15 abr. 2026-
Re: part
Hi Tim,Apologies; the team was waiting on me for this. I just got back from back-to-back service calls but we'll get the quote out today. I just want to confirm I have everything straight:- WH CONTROL KNOB H4WHKN: This is our older design. We can provide parts or you can send the workholder to us for an upgrade to the H5WHKN which is a more robust design. The part cost is about the same but the upgrade requires about three hours of labor.
- Heaters and Thermocouple Assembly: Judging by your pictures, are you asking for a quote for the stage heater harness and not the jet heaters? If it's the heater harness, shipping us the workholder would allow us to replace it, test it and perform the control knob upgrade as well.
Let me know how you'd like to proceed and I'll get the quote over to you.ChrisOn Wed, Apr 15, 2026 at 8:21 AM Blewett, Tim <info@turnpack.com> wrote:Any info on these parts?
From: info@turnpack.com <info@turnpack.com>
Sent: Tuesday, April 7, 2026 3:57 PM
To: Blewett, Tim <blewett@ddc-web.com>
Cc: 'Christopher Berger' <cberger@turnpack.com>
Subject: RE: part!! Caution: External Sender !! Do not click links or open attachments unless you verify the sender.
Engineering is working on all the request. Some will get back to you later today.
Here are the requests that we have just to ensure we are on the same page.
- Heaters
- thermocouple assembly
- button for the vacuum release
- switch on the stage for the vacuum
- knob with the button on the stage
From: Blewett, Tim <blewett@ddc-web.com>
Sent: Tuesday, April 7, 2026 10:23 AM
To: info@turnpack.com
Subject: RE: partAny luck getting any info about the switch?
Tim
From: Blewett, Tim
Sent: Tuesday, March 31, 2026 2:43 PM
To: info@turnpack.com
Subject: RE: partFrom: info@turnpack.com <info@turnpack.com>
Sent: Tuesday, March 31, 2026 2:39 PM
To: Blewett, Tim <blewett@ddc-web.com>
Subject: RE: part!! Caution: External Sender !! Do not click links or open attachments unless you verify the sender.
Do you have a photo or see a part number on it somewhere?
From: Blewett, Tim <blewett@ddc-web.com>
Sent: Tuesday, March 31, 2026 10:38 AM
To: info@turnpack.com
Subject: partGood afternoon,
We have a HGRS-V and looking for the knob with the button on the stage
Thank you,
Timothy P. Blewett
Facilities Technician Sr.
Data Device Corporation
T: 631-567-5600 ext 7444
Your solution provider... for Connectivity, Power, and Control
Notice: This e-mail and any files transmitted with it may contain Data Device Corporation's and its subsidiaries privileged and proprietary information. It is intended solely for the use of the individual or entity to whom it is addressed. If you are not the named recipient of this transmission, any disclosure, copying, distribution or reliance on the contents of this message is prohibited. If you received this e-mail in error, please destroy it and any attached files and notify me immediately.
Click Here to view our privacy statement.
--Christopher Berger
por Chris Berger - 03:07 - 15 abr. 2026-
RE: part
Yes this is correct
From: info@turnpack.com <info@turnpack.com>
Sent: Tuesday, April 21, 2026 12:57 PM
To: 'Christopher Berger' <cberger@turnpack.com>
Cc: Blewett, Tim <blewett@ddc-web.com>
Subject: RE: part!! Caution: External Sender !! Do not click links or open attachments unless you verify the sender.
Hi Tim, please see inquiry below.
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, April 15, 2026 12:02 PMHi Tim,
Apologies; the team was waiting on me for this. I just got back from back-to-back service calls but we'll get the quote out today. I just want to confirm I have everything straight:
-
WH CONTROL KNOB H4WHKN: This is our older design. We can provide parts or you can send the workholder to us for an upgrade to the H5WHKN which is a more robust design. The part cost is about the same but the upgrade
requires about three hours of labor.
- Heaters and Thermocouple Assembly: Judging by your pictures, are you asking for a quote for the stage heater harness and not the jet heaters? If it's the heater harness, shipping us the workholder would allow us to replace it, test it and perform the control knob upgrade as well.
Let me know how you'd like to proceed and I'll get the quote over to you.
Chris
On Wed, Apr 15, 2026 at 8:21 AM Blewett, Tim <info@turnpack.com> wrote:
Any info on these parts?
From: info@turnpack.com <info@turnpack.com>
Sent: Tuesday, April 7, 2026 3:57 PM
To: Blewett, Tim <blewett@ddc-web.com>
Cc: 'Christopher Berger' <cberger@turnpack.com>
Subject: RE: part!! Caution: External Sender !! Do not click links or open attachments unless you verify the sender.
Engineering is working on all the request. Some will get back to you later today.
Here are the requests that we have just to ensure we are on the same page.
- Heaters
- thermocouple assembly
- button for the vacuum release
- switch on the stage for the vacuum
- knob with the button on the stage
From: Blewett, Tim <blewett@ddc-web.com>
Sent: Tuesday, April 7, 2026 10:23 AM
To: info@turnpack.com
Subject: RE: partAny luck getting any info about the switch?
Tim
From: Blewett, Tim
Sent: Tuesday, March 31, 2026 2:43 PM
To: info@turnpack.com
Subject: RE: partFrom: info@turnpack.com <info@turnpack.com>
Sent: Tuesday, March 31, 2026 2:39 PM
To: Blewett, Tim <blewett@ddc-web.com>
Subject: RE: part!! Caution: External Sender !! Do not click links or open attachments unless you verify the sender.
Do you have a photo or see a part number on it somewhere?
From: Blewett, Tim <blewett@ddc-web.com>
Sent: Tuesday, March 31, 2026 10:38 AM
To: info@turnpack.com
Subject: partGood afternoon,
We have a HGRS-V and looking for the knob with the button on the stage
Thank you,
Timothy P. Blewett
Facilities Technician Sr.
Data Device Corporation
T: 631-567-5600 ext 7444
Your solution provider... for Connectivity, Power, and Control
Notice: This e-mail and any files transmitted with it may contain Data Device Corporation's and its subsidiaries privileged and proprietary information. It is intended solely for the use of the individual or entity to whom it is addressed. If you are not the named recipient of this transmission, any disclosure, copying, distribution or reliance on the contents of this message is prohibited. If you received this e-mail in error, please destroy it and any attached files and notify me immediately.
Click Here to view our privacy statement.
--
Christopher Berger
por Tim Blewett - 02:16 - 21 abr. 2026-
RE: part
What would be the turn around if you would do it
From: info@turnpack.com <info@turnpack.com>
Sent: Tuesday, April 21, 2026 2:31 PM
To: Blewett, Tim <blewett@ddc-web.com>
Subject: RE: part!! Caution: External Sender !! Do not click links or open attachments unless you verify the sender.
Okay great. Would you like to repair the heaers yourself or would you prefer we handle it?
From: Blewett, Tim <blewett@ddc-web.com>
Sent: Tuesday, April 21, 2026 11:15 AM
To: info@turnpack.com
Subject: RE: partYes this is correct
From: info@turnpack.com <info@turnpack.com>
Sent: Tuesday, April 21, 2026 12:57 PM
To: 'Christopher Berger' <cberger@turnpack.com>
Cc: Blewett, Tim <blewett@ddc-web.com>
Subject: RE: part!! Caution: External Sender !! Do not click links or open attachments unless you verify the sender.
Hi Tim, please see inquiry below.
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, April 15, 2026 12:02 PMHi Tim,
Apologies; the team was waiting on me for this. I just got back from back-to-back service calls but we'll get the quote out today. I just want to confirm I have everything straight:
-
WH CONTROL KNOB H4WHKN: This is our older design. We can provide parts or you can send the workholder to us for an upgrade to the H5WHKN which is a more robust design. The part cost is about the same but the upgrade
requires about three hours of labor.
- Heaters and Thermocouple Assembly: Judging by your pictures, are you asking for a quote for the stage heater harness and not the jet heaters? If it's the heater harness, shipping us the workholder would allow us to replace it, test it and perform the control knob upgrade as well.
Let me know how you'd like to proceed and I'll get the quote over to you.
Chris
On Wed, Apr 15, 2026 at 8:21 AM Blewett, Tim <info@turnpack.com> wrote:
Any info on these parts?
From: info@turnpack.com <info@turnpack.com>
Sent: Tuesday, April 7, 2026 3:57 PM
To: Blewett, Tim <blewett@ddc-web.com>
Cc: 'Christopher Berger' <cberger@turnpack.com>
Subject: RE: part!! Caution: External Sender !! Do not click links or open attachments unless you verify the sender.
Engineering is working on all the request. Some will get back to you later today.
Here are the requests that we have just to ensure we are on the same page.
- Heaters
- thermocouple assembly
- button for the vacuum release
- switch on the stage for the vacuum
- knob with the button on the stage
From: Blewett, Tim <blewett@ddc-web.com>
Sent: Tuesday, April 7, 2026 10:23 AM
To: info@turnpack.com
Subject: RE: partAny luck getting any info about the switch?
Tim
From: Blewett, Tim
Sent: Tuesday, March 31, 2026 2:43 PM
To: info@turnpack.com
Subject: RE: partFrom: info@turnpack.com <info@turnpack.com>
Sent: Tuesday, March 31, 2026 2:39 PM
To: Blewett, Tim <blewett@ddc-web.com>
Subject: RE: part!! Caution: External Sender !! Do not click links or open attachments unless you verify the sender.
Do you have a photo or see a part number on it somewhere?
From: Blewett, Tim <blewett@ddc-web.com>
Sent: Tuesday, March 31, 2026 10:38 AM
To: info@turnpack.com
Subject: partGood afternoon,
We have a HGRS-V and looking for the knob with the button on the stage
Thank you,
Timothy P. Blewett
Facilities Technician Sr.
Data Device Corporation
T: 631-567-5600 ext 7444
Your solution provider... for Connectivity, Power, and Control
Notice: This e-mail and any files transmitted with it may contain Data Device Corporation's and its subsidiaries privileged and proprietary information. It is intended solely for the use of the individual or entity to whom it is addressed. If you are not the named recipient of this transmission, any disclosure, copying, distribution or reliance on the contents of this message is prohibited. If you received this e-mail in error, please destroy it and any attached files and notify me immediately.
Click Here to view our privacy statement.
--
Christopher Berger
por Tim Blewett - 03:01 - 21 abr. 2026-
RE: part
Any progress on getting a quote for the parts?
From: info@turnpack.com <info@turnpack.com>
Sent: Tuesday, April 21, 2026 4:00 PM
To: Blewett, Tim <blewett@ddc-web.com>
Cc: Gull, James <James.Gull@powerdevicecorp.com>
Subject: RE: part!! Caution: External Sender !! Do not click links or open attachments unless you verify the sender.
Hi Tim, including James as I believe he called regarding the hot gas.
It would be about 2 weeks for repairs once we have the parts in.
From: Blewett, Tim <blewett@ddc-web.com>
Sent: Tuesday, April 21, 2026 12:01 PM
To: info@turnpack.com
Subject: RE: partWhat would be the turn around if you would do it
From: info@turnpack.com <info@turnpack.com>
Sent: Tuesday, April 21, 2026 2:31 PM
To: Blewett, Tim <blewett@ddc-web.com>
Subject: RE: part!! Caution: External Sender !! Do not click links or open attachments unless you verify the sender.
Okay great. Would you like to repair the heaers yourself or would you prefer we handle it?
From: Blewett, Tim <blewett@ddc-web.com>
Sent: Tuesday, April 21, 2026 11:15 AM
To: info@turnpack.com
Subject: RE: partYes this is correct
From: info@turnpack.com <info@turnpack.com>
Sent: Tuesday, April 21, 2026 12:57 PM
To: 'Christopher Berger' <cberger@turnpack.com>
Cc: Blewett, Tim <blewett@ddc-web.com>
Subject: RE: part!! Caution: External Sender !! Do not click links or open attachments unless you verify the sender.
Hi Tim, please see inquiry below.
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, April 15, 2026 12:02 PMHi Tim,
Apologies; the team was waiting on me for this. I just got back from back-to-back service calls but we'll get the quote out today. I just want to confirm I have everything straight:
-
WH CONTROL KNOB H4WHKN: This is our older design. We can provide parts or you can send the workholder to us for an upgrade to the H5WHKN which is a more robust design. The part cost is about the same but the upgrade
requires about three hours of labor.
- Heaters and Thermocouple Assembly: Judging by your pictures, are you asking for a quote for the stage heater harness and not the jet heaters? If it's the heater harness, shipping us the workholder would allow us to replace it, test it and perform the control knob upgrade as well.
Let me know how you'd like to proceed and I'll get the quote over to you.
Chris
On Wed, Apr 15, 2026 at 8:21 AM Blewett, Tim <info@turnpack.com> wrote:
Any info on these parts?
From: info@turnpack.com <info@turnpack.com>
Sent: Tuesday, April 7, 2026 3:57 PM
To: Blewett, Tim <blewett@ddc-web.com>
Cc: 'Christopher Berger' <cberger@turnpack.com>
Subject: RE: part!! Caution: External Sender !! Do not click links or open attachments unless you verify the sender.
Engineering is working on all the request. Some will get back to you later today.
Here are the requests that we have just to ensure we are on the same page.
- Heaters
- thermocouple assembly
- button for the vacuum release
- switch on the stage for the vacuum
- knob with the button on the stage
From: Blewett, Tim <blewett@ddc-web.com>
Sent: Tuesday, April 7, 2026 10:23 AM
To: info@turnpack.com
Subject: RE: partAny luck getting any info about the switch?
Tim
From: Blewett, Tim
Sent: Tuesday, March 31, 2026 2:43 PM
To: info@turnpack.com
Subject: RE: partFrom: info@turnpack.com <info@turnpack.com>
Sent: Tuesday, March 31, 2026 2:39 PM
To: Blewett, Tim <blewett@ddc-web.com>
Subject: RE: part!! Caution: External Sender !! Do not click links or open attachments unless you verify the sender.
Do you have a photo or see a part number on it somewhere?
From: Blewett, Tim <blewett@ddc-web.com>
Sent: Tuesday, March 31, 2026 10:38 AM
To: info@turnpack.com
Subject: partGood afternoon,
We have a HGRS-V and looking for the knob with the button on the stage
Thank you,
Timothy P. Blewett
Facilities Technician Sr.
Data Device Corporation
T: 631-567-5600 ext 7444
Your solution provider... for Connectivity, Power, and Control
Notice: This e-mail and any files transmitted with it may contain Data Device Corporation's and its subsidiaries privileged and proprietary information. It is intended solely for the use of the individual or entity to whom it is addressed. If you are not the named recipient of this transmission, any disclosure, copying, distribution or reliance on the contents of this message is prohibited. If you received this e-mail in error, please destroy it and any attached files and notify me immediately.
Click Here to view our privacy statement.
--
Christopher Berger
por Tim Blewett - 11:32 - 28 abr. 2026 -
WH CONTROL KNOB H4WHKN: This is our older design. We can provide parts or you can send the workholder to us for an upgrade to the H5WHKN which is a more robust design. The part cost is about the same but the upgrade
requires about three hours of labor.
-
RE: part
Can you give me a quote for the parts that I need for the table.
Thank you,
Tim
From: info@turnpack.com <info@turnpack.com>
Sent: Tuesday, April 21, 2026 4:00 PM
To: Blewett, Tim <blewett@ddc-web.com>
Cc: Gull, James <James.Gull@powerdevicecorp.com>
Subject: RE: part!! Caution: External Sender !! Do not click links or open attachments unless you verify the sender.
Hi Tim, including James as I believe he called regarding the hot gas.
It would be about 2 weeks for repairs once we have the parts in.
From: Blewett, Tim <blewett@ddc-web.com>
Sent: Tuesday, April 21, 2026 12:01 PM
To: info@turnpack.com
Subject: RE: partWhat would be the turn around if you would do it
From: info@turnpack.com <info@turnpack.com>
Sent: Tuesday, April 21, 2026 2:31 PM
To: Blewett, Tim <blewett@ddc-web.com>
Subject: RE: part!! Caution: External Sender !! Do not click links or open attachments unless you verify the sender.
Okay great. Would you like to repair the heaers yourself or would you prefer we handle it?
From: Blewett, Tim <blewett@ddc-web.com>
Sent: Tuesday, April 21, 2026 11:15 AM
To: info@turnpack.com
Subject: RE: partYes this is correct
From: info@turnpack.com <info@turnpack.com>
Sent: Tuesday, April 21, 2026 12:57 PM
To: 'Christopher Berger' <cberger@turnpack.com>
Cc: Blewett, Tim <blewett@ddc-web.com>
Subject: RE: part!! Caution: External Sender !! Do not click links or open attachments unless you verify the sender.
Hi Tim, please see inquiry below.
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, April 15, 2026 12:02 PMHi Tim,
Apologies; the team was waiting on me for this. I just got back from back-to-back service calls but we'll get the quote out today. I just want to confirm I have everything straight:
-
WH CONTROL KNOB H4WHKN: This is our older design. We can provide parts or you can send the workholder to us for an upgrade to the H5WHKN which is a more robust design. The part cost is about the same but the upgrade
requires about three hours of labor.
- Heaters and Thermocouple Assembly: Judging by your pictures, are you asking for a quote for the stage heater harness and not the jet heaters? If it's the heater harness, shipping us the workholder would allow us to replace it, test it and perform the control knob upgrade as well.
Let me know how you'd like to proceed and I'll get the quote over to you.
Chris
On Wed, Apr 15, 2026 at 8:21 AM Blewett, Tim <info@turnpack.com> wrote:
Any info on these parts?
From: info@turnpack.com <info@turnpack.com>
Sent: Tuesday, April 7, 2026 3:57 PM
To: Blewett, Tim <blewett@ddc-web.com>
Cc: 'Christopher Berger' <cberger@turnpack.com>
Subject: RE: part!! Caution: External Sender !! Do not click links or open attachments unless you verify the sender.
Engineering is working on all the request. Some will get back to you later today.
Here are the requests that we have just to ensure we are on the same page.
- Heaters
- thermocouple assembly
- button for the vacuum release
- switch on the stage for the vacuum
- knob with the button on the stage
From: Blewett, Tim <blewett@ddc-web.com>
Sent: Tuesday, April 7, 2026 10:23 AM
To: info@turnpack.com
Subject: RE: partAny luck getting any info about the switch?
Tim
From: Blewett, Tim
Sent: Tuesday, March 31, 2026 2:43 PM
To: info@turnpack.com
Subject: RE: partFrom: info@turnpack.com <info@turnpack.com>
Sent: Tuesday, March 31, 2026 2:39 PM
To: Blewett, Tim <blewett@ddc-web.com>
Subject: RE: part!! Caution: External Sender !! Do not click links or open attachments unless you verify the sender.
Do you have a photo or see a part number on it somewhere?
From: Blewett, Tim <blewett@ddc-web.com>
Sent: Tuesday, March 31, 2026 10:38 AM
To: info@turnpack.com
Subject: partGood afternoon,
We have a HGRS-V and looking for the knob with the button on the stage
Thank you,
Timothy P. Blewett
Facilities Technician Sr.
Data Device Corporation
T: 631-567-5600 ext 7444
Your solution provider... for Connectivity, Power, and Control
Notice: This e-mail and any files transmitted with it may contain Data Device Corporation's and its subsidiaries privileged and proprietary information. It is intended solely for the use of the individual or entity to whom it is addressed. If you are not the named recipient of this transmission, any disclosure, copying, distribution or reliance on the contents of this message is prohibited. If you received this e-mail in error, please destroy it and any attached files and notify me immediately.
Click Here to view our privacy statement.
--
Christopher Berger
por Tim Blewett - 07:12 - 22 abr. 2026 -
WH CONTROL KNOB H4WHKN: This is our older design. We can provide parts or you can send the workholder to us for an upgrade to the H5WHKN which is a more robust design. The part cost is about the same but the upgrade
requires about three hours of labor.
-
WH CONTROL KNOB H4WHKN: This is our older design. We can provide parts or you can send the workholder to us for an upgrade to the H5WHKN which is a more robust design. The part cost is about the same but the upgrade
requires about three hours of labor.
-
WH CONTROL KNOB H4WHKN: This is our older design. We can provide parts or you can send the workholder to us for an upgrade to the H5WHKN which is a more robust design. The part cost is about the same but the upgrade
requires about three hours of labor.
- WH CONTROL KNOB H4WHKN: This is our older design. We can provide parts or you can send the workholder to us for an upgrade to the H5WHKN which is a more robust design. The part cost is about the same but the upgrade requires about three hours of labor.
