Dear Lorena,
Yes I have got your PO, and here I return with PI.
I just caculate with tungsten carbide products normal shipping way Air + Local shipping to USA for you. which ship directly to your door and can avoid the high tarrif in US customs.
If DHL or Fedex etc. high tarrif will be applied.
Just to mention: the shipping has minimum weight of 12kg to start with, for 100pcs of your carbide rods is 6kg. So the same shipping cost can delivery 200pcs carbide rods if you want.
You can see the lead time and bank info in the PI. We need your detail address with post code/ phone/ contact person for shipping. Pls kindly give us feedback to move on.
Thanks and best regards,
-----------------------------
|
|
|
Stanley Peng
Business Manager
Kone Carbide Tool Ltd.
|
|
------------------ Original ------------------
From： "Info at Turnpack"<info@turnpack.com>
Date： 2026-06-16 05:03
To： "Stanley-Konetool"<sales1@konetool.com>;
Cc： "Ivan Arevalo"<iarevalo@turnpack.com>; "Christopher Berger"<cberger@turnpack.com>;
Subject： Re: Re: Fwd: Kone Carbide product request -Carbide rod
Ivan can you email them back asking to check their spam. I have emailed several times and they dont answer. I have already sent to PO
Respectfully,
Lorena Carrillo
Dear Ivan,
Hope you enjoy your holiday.
After our talk on 10th June, have not heard from Lorena yet.
Have you forward her this thread?
Best regards,
-----------------------------
|
| Stanley Peng Business Manager Kone Carbide Tool Ltd. |
|
------------------ Original ------------------
Date： 2026-06-11 09:03
Subject： Re: Re: Fwd: Kone Carbide product request -Carbide rod
Hi Ivan,
Yes, pls, cuz now the material is still unstable and now it's trending to increase again.
The quotation goes up and down too. Hope you order in a lowest cost period.
Hope to hear from you soonest.
Best regards,
----------------------------- |
| Stanley Peng Business Manager Kone Carbide Tool Ltd. |
|
------------------ Original ------------------
Date： 2026-06-10 22:56
Subject： Re: Re: Fwd: Kone Carbide product request -Carbide rod
Yes I will be out of the office from the 10th- 21st. I will forward this thread to Lorena, who will handle the purchasing soon.
Hi Ivan,
Are you in vacation?
Pls kindly let us know.
Thanks.
----------------------------- |
| Stanley Peng Business Manager Kone Carbide Tool Ltd. |
|
------------------ Original ------------------
Date： 2026-06-08 17:47
Subject： Re: Re: Fwd: Kone Carbide product request -Carbide rod
Dear Ivan,
Here attached Quotation for your reference
Both Virgin Material and Recycle material quotation inside.
Pls check which one you like better, the price is even better than last time.
If you have other items to get quote, pls let us know.
You can also let me know your shipping address for cost checking, and let us know which payment method you want.
Hope to get your order soon.
Best regards,
----------------------------- |
| Stanley Peng Business Manager Kone Carbide Tool Ltd. |
|
------------------ Original ------------------
Date： 2026-06-06 00:52
Subject： Re: Re: Fwd: Kone Carbide product request -Carbide rod
Hi Stanley,
We found that 64mm length blanks could work for us as well. The same requirements as before (h6 tolerance, 45 degree chamfer on one end, surface grounded, and YG10x 10% cobalt grade), but just the 64mm length and 8mm diameter. What are the pricing and lead time for 100-200 blanks?
Dear Kim,
Thank you for your clarification.
We understand that the blank is only required as stock material, and your manufacturers will use it to make the cutters. That is totally fine. We will focus on supplying the carbide blank material according to your required size and grade.
Regarding the blank, we attached a catalog for your reference and wait for your update on the confirmed quantity and specific requirements such as carbide grade, tolerance, surface condition, or packing, please also let us know so we can make sure everything is correct before production.
Best regards,
----------------------------- |
| Stanley Peng Business Manager Kone Carbide Tool Ltd. |
|
------------------ Original ------------------
Date： 2026-06-03 23:14
Subject： Re: Re: Fwd: Kone Carbide product request -Carbide rod
I understand there is an MOQ. I will check with my team and get back to you about getting an order in to receive a sample.
Yes, the blank is purely just stock material as we have manufacturers who have used the material to create cutters. I know your company is capable of this but due to the minimum and outdated information provided on the cutter tool, we prefer sending stock material to our manufacturers as they have cut tools for us in the past.
If any other questions please let me know.
Best,
Ivan
Dear Ivan,
Thanks for your email, 2 questions:
1. if to receive a finished sample of carbide burr according to the drawing -- Normally it has MOQ, if needed, I can check MOQ and price for your order. MOQ depends from 10-50pcs minimum. and after that everything ok, we can make a bigger order of 130pcs.
2. If for the blank, it will be just a piece of carbide blank material right? I am not quite understanding what the blank is for. Could you explain a little bit of it?
Pls kindly give us reply on the 2 questions above. So we can move on to next step Ivan.
Hope to hear from you soonest.
Best regards,
----------------------------- |
| Stanley Peng Business Manager Kone Carbide Tool Ltd. |
|
------------------ Original ------------------
Date： 2026-06-03 06:53
Subject： Re: Re: Fwd: Kone Carbide product request -Carbide rod
Is there an option to receive a sample of either the blank or the finished tool?
Yes, this is correct.
Dear Ivan,
Here comes to a changed drawing for the item you want, pls kindly confirm for sure it is the product that you want to inquire. so we can start the process.
1. Tungsten carbide material for the whole bit.
2. YG10X = ISO K20 grade
3. Quantity 130pcs for quotation.
Hope to hear from you soonest.
Best regards,
----------------------------- |
| Stanley Peng Business Manager Kone Carbide Tool Ltd. |
|
------------------ Original ------------------
Date： 2026-06-02 00:05
Subject： Re: Re: Fwd: Kone Carbide product request -Carbide rod
We would need around 130 tooling bits, but we would like to see if there is a price difference based on the order quantity.
The material the cutter works with is Kovar and Nickel Cobalt. We used a 10% cobalt carbide grade when ordered.
Let me know if more information is needed.
Best,
Ivan
Hi Stanley,
The only detail on the drawing that does not match is that the tin coating should be 1.1" long, not .315" that you have.
Dear Ivan,
Sorry let you wait long, here comes the final drawing according to yours, could you pls check and confirm?
If ok, then we will start the quotation process to move on. And pls tell us quantity of such tool you need.
Also can we know what working material will this tool deal with? So we can choose the right carbide grade for use.
Hope to hear from you soonest.
Best regards,
----------------------------- |
| Stanley Peng Business Manager Kone Carbide Tool Ltd. |
|
