Archivados
Info Inbox
info@turnpack.com
RE: Re: Fwd: Kone Carbide product request -Carbide rod
Okay Lorena,
Been 5 days after our last talk. how are you?
We've back from Dragon Boat Festival holiday today.
And hopefully we can continue today on the carbide rods PI/PO.
Best regards,
|
We are not in a rush at this time so it should be okay.
From: Stanley-Konetool <sales1@konetool.com>
Sent: Tuesday, June 16, 2026 7:40 PM
To: Lorena Carrillo <info@turnpack.com>
Cc: Ivan Arevalo <iarevalo@turnpack.com>; Christopher Berger <cberger@turnpack.com>
Subject: RE: Re: Fwd: Kone Carbide product request -Carbide rod
My pleasure, and noted. Hopefully we can arrange the order before the 3-day Dragon Boat holiday from 19-21st June.
Best regards
-----------------------------
|
------------------ Original ------------------
From： "Lorena Carrillo"<info@turnpack.com>
Date： 2026-06-17 10:26
To： "Stanley-Konetool"<sales1@konetool.com>;
Cc： "Ivan Arevalo"<iarevalo@turnpack.com>; "Christopher Berger"<cberger@turnpack.com>;
Subject： RE: Re: Fwd: Kone Carbide product request -Carbide rod
Thank you. payment will be processed on Thursday/Friday and I will send confirmation.
From: Stanley-Konetool <sales1@konetool.com>
Sent: Tuesday, June 16, 2026 7:22 PM
To: Lorena Carrillo <info@turnpack.com>
Cc: Ivan Arevalo <iarevalo@turnpack.com>; Christopher Berger <cberger@turnpack.com>
Subject: RE: Re: Fwd: Kone Carbide product request -Carbide rod
Importance: High
Dear Lorena,
Thanks for your PO. I changed the PI again for your information. Pls confirm everything inside, if ok, pls send us bank receipt later, then we can move on soon.
Best regards,
-----------------------------
|
------------------ Original ------------------
From： "Lorena Carrillo"<info@turnpack.com>
Date： 2026-06-17 09:36
To： "Stanley-Konetool"<sales1@konetool.com>;
Cc： "Ivan Arevalo"<iarevalo@turnpack.com>; "Christopher Berger"<cberger@turnpack.com>;
Subject： RE: Re: Fwd: Kone Carbide product request -Carbide rod
Thank you. we did approve an increase to 200 as long as all other fees are the same and there is no tariff increase. Please confirm
From: Stanley-Konetool <sales1@konetool.com>
Sent: Tuesday, June 16, 2026 6:23 PM
To: Lorena Carrillo <info@turnpack.com>
Cc: Ivan Arevalo <iarevalo@turnpack.com>; Christopher Berger <cberger@turnpack.com>
Subject: RE: Re: Fwd: Kone Carbide product request -Carbide rod
Importance: High
Dear Lorena and all,
Attached revised PI with your shipping info updated and add your PO number inside. Pls check product details too inside and once you sent the payment, pls send us the bank receipt so we can arrange the order asap.
Best regards,
-----------------------------
|
------------------ Original ------------------
From： "Lorena Carrillo"<info@turnpack.com>
Date： 2026-06-17 02:33
To： "Stanley-Konetool"<sales1@konetool.com>;
Cc： "Ivan Arevalo"<iarevalo@turnpack.com>; "Christopher Berger"<cberger@turnpack.com>;
Subject： RE: Re: Fwd: Kone Carbide product request -Carbide rod
Please ship to:
Turnpack LLC
22425 S Scotland Ct, Suite104, Queen Creek, AZ 85142
Lorena Carrillo
480-331-1878
Okay yes we can increase the PO if it will save on the 25% tariff.
From: Stanley-Konetool <sales1@konetool.com>
Sent: Tuesday, June 16, 2026 6:21 AM
To: Info at Turnpack <info@turnpack.com>
Cc: Ivan Arevalo <iarevalo@turnpack.com>; Christopher Berger <cberger@turnpack.com>
Subject: Re: Re: Fwd: Kone Carbide product request -Carbide rod
Importance: High
Dear Lorena,
Yes I have got your PO, and here I return with PI.
I just caculate with tungsten carbide products normal shipping way Air + Local shipping to USA for you. which ship directly to your door and can avoid the high tarrif in US customs.
If DHL or Fedex etc. high tarrif will be applied.
Just to mention: the shipping has minimum weight of 12kg to start with, for 100pcs of your carbide rods is 6kg. So the same shipping cost can delivery 200pcs carbide rods if you want.
You can see the lead time and bank info in the PI. We need your detail address with post code/ phone/ contact person for shipping. Pls kindly give us feedback to move on.
Thanks and best regards,
-----------------------------
|
------------------ Original ------------------
From： "Info at Turnpack"<info@turnpack.com>
Date： 2026-06-16 05:03
To： "Stanley-Konetool"<sales1@konetool.com>;
Cc： "Ivan Arevalo"<iarevalo@turnpack.com>; "Christopher Berger"<cberger@turnpack.com>;
Subject： Re: Re: Fwd: Kone Carbide product request -Carbide rod
Ivan can you email them back asking to check their spam. I have emailed several times and they dont answer. I have already sent to PO
Respectfully,
Lorena Carrillo
On Mon, Jun 15, 2026, 6:23 AM Stanley-Konetool <sales1@konetool.com> wrote:
Dear Ivan,
Hope you enjoy your holiday.
After our talk on 10th June, have not heard from Lorena yet.
Have you forward her this thread?
Best regards,
-----------------------------
Stanley Peng
Business Manager
Kone Carbide Tool Ltd.
Office: +86-28-6171627 72 | Mobile : +86-18665361540 (Wechat/Whatsapp)
No.99 Haiwang Road, Liandong U-Valley Industrial Park, Wenjiang District, Chengdu 611130 China
------------------ Original ------------------
From： "彭超"<sales1@konetool.com>
Date： 2026-06-11 09:03
To： "Ivan Arevalo"<iarevalo@turnpack.com>;
Cc： "Info at Turnpack"<info@turnpack.com>;
Subject： Re: Re: Fwd: Kone Carbide product request -Carbide rod
Hi Ivan,
Yes, pls, cuz now the material is still unstable and now it's trending to increase again.
The quotation goes up and down too. Hope you order in a lowest cost period.
Hope to hear from you soonest.
Best regards,
-----------------------------
Stanley Peng
Business Manager
Kone Carbide Tool Ltd.
Office: +86-28-6171627 72 | Mobile : +86-18665361540 (Wechat/Whatsapp)
No.99 Haiwang Road, Liandong U-Valley Industrial Park, Wenjiang District, Chengdu 611130 China
------------------ Original ------------------
From： "Ivan Arevalo"<iarevalo@turnpack.com>
Date： 2026-06-10 22:56
To： "Stanley-Konetool"<sales1@konetool.com>;
Cc： "Info at Turnpack"<info@turnpack.com>;
Subject： Re: Re: Fwd: Kone Carbide product request -Carbide rod
Yes I will be out of the office from the 10th- 21st. I will forward this thread to Lorena, who will handle the purchasing soon.
On Tue, Jun 9, 2026 at 8:48 PM Stanley-Konetool <sales1@konetool.com> wrote:
Hi Ivan,
Are you in vacation?
Pls kindly let us know.
Thanks.
-----------------------------
Stanley Peng
Business Manager
Kone Carbide Tool Ltd.
Office: +86-28-6171627 72 | Mobile : +86-18665361540 (Wechat/Whatsapp)
No.99 Haiwang Road, Liandong U-Valley Industrial Park, Wenjiang District, Chengdu 611130 China
------------------ Original ------------------
From： "彭超"<sales1@konetool.com>
Date： 2026-06-08 17:47
To： "Ivan Arevalo"<iarevalo@turnpack.com>;
Subject： Re: Re: Fwd: Kone Carbide product request -Carbide rod
Dear Ivan,
Here attached Quotation for your reference
Both Virgin Material and Recycle material quotation inside.
Pls check which one you like better, the price is even better than last time.
If you have other items to get quote, pls let us know.
You can also let me know your shipping address for cost checking, and let us know which payment method you want.
Hope to get your order soon.
Best regards,
-----------------------------
Stanley Peng
Business Manager
Kone Carbide Tool Ltd.
Office: +86-28-6171627 72 | Mobile : +86-18665361540 (Wechat/Whatsapp)
No.99 Haiwang Road, Liandong U-Valley Industrial Park, Wenjiang District, Chengdu 611130 China
------------------ Original ------------------
From： "Ivan Arevalo"<iarevalo@turnpack.com>
Date： 2026-06-06 00:52
To： "Stanley-Konetool"<sales1@konetool.com>;
Subject： Re: Re: Fwd: Kone Carbide product request -Carbide rod
Hi Stanley,
We found that 64mm length blanks could work for us as well. The same requirements as before (h6 tolerance, 45 degree chamfer on one end, surface grounded, and YG10x 10% cobalt grade), but just the 64mm length and 8mm diameter. What are the pricing and lead time for 100-200 blanks?
On Wed, Jun 3, 2026 at 6:35 PM Stanley-Konetool <sales1@konetool.com> wrote:
Dear Kim,
Thank you for your clarification.
We understand that the blank is only required as stock material, and your manufacturers will use it to make the cutters. That is totally fine. We will focus on supplying the carbide blank material according to your required size and grade.
Regarding the blank, we attached a catalog for your reference and wait for your update on the confirmed quantity and specific requirements such as carbide grade, tolerance, surface condition, or packing, please also let us know so we can make sure everything is correct before production.
Best regards,
-----------------------------
Stanley Peng
Business Manager
Kone Carbide Tool Ltd.
Office: +86-28-6171627 72 | Mobile : +86-18665361540 (Wechat/Whatsapp)
No.99 Haiwang Road, Liandong U-Valley Industrial Park, Wenjiang District, Chengdu 611130 China
------------------ Original ------------------
From： "Ivan Arevalo"<iarevalo@turnpack.com>
Date： 2026-06-03 23:14
To： "Stanley-Konetool"<sales1@konetool.com>;
Subject： Re: Re: Fwd: Kone Carbide product request -Carbide rod
I understand there is an MOQ. I will check with my team and get back to you about getting an order in to receive a sample.
Yes, the blank is purely just stock material as we have manufacturers who have used the material to create cutters. I know your company is capable of this but due to the minimum and outdated information provided on the cutter tool, we prefer sending stock material to our manufacturers as they have cut tools for us in the past.
If any other questions please let me know.
Best,
Ivan
On Tue, Jun 2, 2026 at 6:43 PM Stanley-Konetool <sales1@konetool.com> wrote:
Dear Ivan,
Thanks for your email, 2 questions:
1. if to receive a finished sample of carbide burr according to the drawing -- Normally it has MOQ, if needed, I can check MOQ and price for your order. MOQ depends from 10-50pcs minimum. and after that everything ok, we can make a bigger order of 130pcs.
2. If for the blank, it will be just a piece of carbide blank material right? I am not quite understanding what the blank is for. Could you explain a little bit of it?
Pls kindly give us reply on the 2 questions above. So we can move on to next step Ivan.
Hope to hear from you soonest.
Best regards,
-----------------------------
Stanley Peng
Business Manager
Kone Carbide Tool Ltd.
Office: +86-28-6171627 72 | Mobile : +86-18665361540 (Wechat/Whatsapp)
No.99 Haiwang Road, Liandong U-Valley Industrial Park, Wenjiang District, Chengdu 611130 China
------------------ Original ------------------
From： "Ivan Arevalo"<iarevalo@turnpack.com>
Date： 2026-06-03 06:53
To： "Stanley-Konetool"<sales1@konetool.com>;
Subject： Re: Re: Fwd: Kone Carbide product request -Carbide rod
Is there an option to receive a sample of either the blank or the finished tool?
On Tue, Jun 2, 2026 at 3:51 PM Ivan Arevalo <iarevalo@turnpack.com> wrote:
Yes, this is correct.
On Tue, Jun 2, 2026 at 1:04 AM Stanley-Konetool <sales1@konetool.com> wrote:
Dear Ivan,
Here comes to a changed drawing for the item you want, pls kindly confirm for sure it is the product that you want to inquire. so we can start the process.
1. Tungsten carbide material for the whole bit.
2. YG10X = ISO K20 grade
3. Quantity 130pcs for quotation.
Hope to hear from you soonest.
Best regards,
-----------------------------
Stanley Peng
Business Manager
Kone Carbide Tool Ltd.
Office: +86-28-6171627 72 | Mobile : +86-18665361540 (Wechat/Whatsapp)
No.99 Haiwang Road, Liandong U-Valley Industrial Park, Wenjiang District, Chengdu 611130 China
------------------ Original ------------------
From： "Ivan Arevalo"<iarevalo@turnpack.com>
Date： 2026-06-02 00:05
To： "Stanley-Konetool"<sales1@konetool.com>;
Subject： Re: Re: Fwd: Kone Carbide product request -Carbide rod
We would need around 130 tooling bits, but we would like to see if there is a price difference based on the order quantity.
The material the cutter works with is Kovar and Nickel Cobalt. We used a 10% cobalt carbide grade when ordered.
Let me know if more information is needed.
Best,
Ivan
On Mon, Jun 1, 2026 at 8:57 AM Ivan Arevalo <iarevalo@turnpack.com> wrote:
Hi Stanley,
The only detail on the drawing that does not match is that the tin coating should be 1.1" long, not .315" that you have.
On Fri, May 29, 2026 at 11:57 PM Stanley-Konetool <sales1@konetool.com> wrote:
Dear Ivan,
Sorry let you wait long, here comes the final drawing according to yours, could you pls check and confirm?
If ok, then we will start the quotation process to move on. And pls tell us quantity of such tool you need.
Also can we know what working material will this tool deal with? So we can choose the right carbide grade for use.
Hope to hear from you soonest.
Best regards,
-----------------------------
Stanley Peng
Business Manager
Kone Carbide Tool Ltd.
por Kone Carbide Tool Ltd - 10:46 - 21 jun. 2026