2. Listas de correo
  3. Info Inbox
  4. Re: Tempe Crane shop relocation estimate

Archivados

Info Inbox

info@turnpack.com

Order 6712220, Your PO# *26271830

Your shipment is scheduled for delivery tomorrow 873749375806

Re: Tempe Crane shop relocation estimate

The manner I would move the machines into place would be with a forklift. If we skated the machines into place on road plates we would not be able to stay on the plates for final positioning of the machines. Some of your equipment does not allow adequate surface area on the bottom to use jacks to remove them from the skates, where it would be permissible, this would also point load the floor. My road plates weigh around 4,000lb and are ideally moved into place with a forklift which would require driving onto the plates to set them. I believe you would probably be better off moving the machines in on air skates to minimize the affected weight on the floor, unfortunately we do not possess those. If you would like for me to do the job with conventional means that we can supply I would do it in the manner mentioned above. We would have you sign a waiver for any damage to the floor and thank you for informing us of the potential danger.
Thanks,   

PAUL GILDON
RIGGING FOREMAN
TEMPE CRANE AND RIGGING
1979 E 5TH STREET
TEMPE AZ. 85288
PHONE 480 967 0026
FAX 480 967 1071
CELL 480 797 9464


On Tuesday, July 7, 2026 at 09:11:28 AM MST, Info at Turnpack <info@turnpack.com> wrote:


Hello Paula and Terri

Before we schedule, one important condition on the destination floor. The Mesa slab is only 4" thick, and we can't repour before the move, so slab protection needs to be part of the job:
 Set method— please tell me how you'll move and set each machine inside the building (crane/gantry vs. forklift vs. skates). We want tominimize loaded forklift travel across the slab; prefer crane offload + machinery skates for interior positioning.
 Load-spreading— lay temporarysteel road plates / crane matsalong the travel path so wheel/skate loads are distributed, and keep loads off control joints and slab edges.
 Base plates— machines will sit on steel load-spreading plates under the leveling feet; we'll provide these — coordinate final placement with your crew.
 Floor-damage responsibility: I need to align on this: if the slab is damaged despite the protection above being followed, how do we handle it?
 Confirm whether items 1–2 change your price, and add them as line items.
Please reply with your set method and any cost adjustment, and we'll get it scheduled.

Respectfully,
Lorena Carrillo

On Wed, Jul 1, 2026, 1:16 PM Info at Turnpack <info@turnpack.com> wrote:
Hello team,  do you have availability next Friday for the move. 

Respectfully,
Lorena Carrillo

On Tue, Jun 9, 2026, 12:22 PM Lorena Carrillo <lcarrillo@turnpack.com> wrote:

Hello team, following up on this is request. Please confirm how far in advance we need to confirm move date.

 

Thank you for your time,

Lorena Carrillo

 

 

From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Friday, May 22, 2026 3:21 PM
To: 'Terri Naddy' <terri@tempecrane.com>; 'Dispatch Department' <dispatch@tempecrane.com>; 'paul g' <riggerguy5000@yahoo.com>
Subject: RE: Tempe Crane shop relocation estimate

 

Great thank you! please see attached bid approval signoff.

 

When would we have to let you know the move date? We are still looking at mid-to late June and hoping for a Friday move date.  So, most likely, the 19th or 26th.

 

Thank you for your time,

Lorena Carrillo

 

 

From: Terri Naddy <terri@tempecrane.com>
Sent: Wednesday, May 20, 2026 3:58 PM
To: lcarrillo@turnpack.com; Dispatch Department <dispatch@tempecrane.com>; paul g <riggerguy5000@yahoo.com>
Subject: Tempe Crane shop relocation estimate

 

Here you are Lorena

--

Tempe Crane & Rigging logo

Terri Naddy

Dispatch Office Manager | Tempe Crane & Rigging

IMPORTANT: Please call our office to schedule jobs or make changes to your scheduled crane/rigging services. Answering phones are our first priority.

 

por "paul g" <riggerguy5000@yahoo.com> - 05:31 - 7 jul. 2026

1 archivos adjuntos 1 archivos adjuntos

image001.png

Seguimientos

  • RE: Tempe Crane shop relocation estimate

    Thank you for the information. We will get back to you shortly.

     

    Thank you for your time,

    Lorena Carrillo

     

     

    From: paul g <riggerguy5000@yahoo.com>
    Sent: Tuesday, July 7, 2026 2:28 PM
    To: Lorena Carrillo <lcarrillo@turnpack.com>; Info at Turnpack <info@turnpack.com>
    Cc: Terri Naddy <terri@tempecrane.com>; Dispatch Department <dispatch@tempecrane.com>; Christopher Berger <cberger@turnpack.com>
    Subject: Re: Tempe Crane shop relocation estimate

     

    The manner I would move the machines into place would be with a forklift. If we skated the machines into place on road plates we would not be able to stay on the plates for final positioning of the machines. Some of your equipment does not allow adequate surface area on the bottom to use jacks to remove them from the skates, where it would be permissible, this would also point load the floor. My road plates weigh around 4,000lb and are ideally moved into place with a forklift which would require driving onto the plates to set them. I believe you would probably be better off moving the machines in on air skates to minimize the affected weight on the floor, unfortunately we do not possess those. If you would like for me to do the job with conventional means that we can supply I would do it in the manner mentioned above. We would have you sign a waiver for any damage to the floor and thank you for informing us of the potential danger.

    Thanks,   

     

    PAUL GILDON
    RIGGING FOREMAN
    TEMPE CRANE AND RIGGING
    1979 E 5TH STREET
    TEMPE AZ. 85288
    PHONE 480 967 0026
    FAX 480 967 1071
    CELL 480 797 9464

     

     

    On Tuesday, July 7, 2026 at 09:11:28 AM MST, Info at Turnpack <info@turnpack.com> wrote:

     

     

    Hello Paula and Terri

     

    Before we schedule, one important condition on the destination floor. The Mesa slab is only 4" thick, and we can't repour before the move, so slab protection needs to be part of the job:

     Set method— please tell me how you'll move and set each machine inside the building (crane/gantry vs. forklift vs. skates). We want tominimize loaded forklift travel across the slab; prefer crane offload + machinery skates for interior positioning.

     Load-spreading— lay temporarysteel road plates / crane matsalong the travel path so wheel/skate loads are distributed, and keep loads off control joints and slab edges.

     Base plates— machines will sit on steel load-spreading plates under the leveling feet; we'll provide these — coordinate final placement with your crew.

     Floor-damage responsibility: I need to align on this: if the slab is damaged despite the protection above being followed, how do we handle it?

     Confirm whether items 1–2 change your price, and add them as line items.

    Please reply with your set method and any cost adjustment, and we'll get it scheduled.

     

    Respectfully,
    Lorena Carrillo

     

    On Wed, Jul 1, 2026, 1:16 PM Info at Turnpack <info@turnpack.com> wrote:

    Hello team,  do you have availability next Friday for the move. 

     

    Respectfully,
    Lorena Carrillo

     

    On Tue, Jun 9, 2026, 12:22 PM Lorena Carrillo <lcarrillo@turnpack.com> wrote:

    Hello team, following up on this is request. Please confirm how far in advance we need to confirm move date.

     

    Thank you for your time,

    Lorena Carrillo

     

     

    From: Lorena Carrillo <lcarrillo@turnpack.com>
    Sent: Friday, May 22, 2026 3:21 PM
    To: 'Terri Naddy' <terri@tempecrane.com>; 'Dispatch Department' <dispatch@tempecrane.com>; 'paul g' <riggerguy5000@yahoo.com>
    Subject: RE: Tempe Crane shop relocation estimate

     

    Great thank you! please see attached bid approval signoff.

     

    When would we have to let you know the move date? We are still looking at mid-to late June and hoping for a Friday move date.  So, most likely, the 19th or 26th.

     

    Thank you for your time,

    Lorena Carrillo

     

     

    From: Terri Naddy <terri@tempecrane.com>
    Sent: Wednesday, May 20, 2026 3:58 PM
    To: lcarrillo@turnpack.com; Dispatch Department <dispatch@tempecrane.com>; paul g <riggerguy5000@yahoo.com>
    Subject: Tempe Crane shop relocation estimate

     

    Here you are Lorena

    --

    Tempe Crane & Rigging logo

    Terri Naddy

    Dispatch Office Manager | Tempe Crane & Rigging

    O: 480.967.0026
    terri@tempecrane.com
    www.tempecrane.com
    1979 E 5th Street, Tempe, AZ 85288
    Facebook: Tempe Crane

    IMPORTANT: Please call our office to schedule jobs or make changes to your scheduled crane/rigging services. Answering phones are our first priority.

     

    por Lorena Carrillo - 02:31 - 8 jul. 2026

    1 archivos adjuntos 1 archivos adjuntos

    image001.png