Archivados
Info Inbox
info@turnpack.com
RE: Tempe Crane shop relocation estimate
Thank you for the information. We will get back to you shortly.
Thank you for your time,
Lorena Carrillo
From: paul g <riggerguy5000@yahoo.com>
Sent: Tuesday, July 7, 2026 2:28 PM
To: Lorena Carrillo <lcarrillo@turnpack.com>; Info at Turnpack <info@turnpack.com>
Cc: Terri Naddy <terri@tempecrane.com>; Dispatch Department <dispatch@tempecrane.com>; Christopher Berger <cberger@turnpack.com>
Subject: Re: Tempe Crane shop relocation estimate
The manner I would move the machines into place would be with a forklift. If we skated the machines into place on road plates we would not be able to stay on the plates for final positioning of the machines. Some of your equipment does not allow adequate surface area on the bottom to use jacks to remove them from the skates, where it would be permissible, this would also point load the floor. My road plates weigh around 4,000lb and are ideally moved into place with a forklift which would require driving onto the plates to set them. I believe you would probably be better off moving the machines in on air skates to minimize the affected weight on the floor, unfortunately we do not possess those. If you would like for me to do the job with conventional means that we can supply I would do it in the manner mentioned above. We would have you sign a waiver for any damage to the floor and thank you for informing us of the potential danger.
Thanks,
PAUL GILDON
RIGGING FOREMAN
TEMPE CRANE AND RIGGING
1979 E 5TH STREET
TEMPE AZ. 85288
PHONE 480 967 0026
FAX 480 967 1071
CELL 480 797 9464
On Tuesday, July 7, 2026 at 09:11:28 AM MST, Info at Turnpack <info@turnpack.com> wrote:
Hello Paula and Terri
Before we schedule, one important condition on the destination floor. The Mesa slab is only 4" thick, and we can't repour before the move, so slab protection needs to be part of the job:
Set method— please tell me how you'll move and set each machine inside the building (crane/gantry vs. forklift vs. skates). We want tominimize loaded forklift travel across the slab; prefer crane offload + machinery skates for interior positioning.
Load-spreading— lay temporarysteel road plates / crane matsalong the travel path so wheel/skate loads are distributed, and keep loads off control joints and slab edges.
Base plates— machines will sit on steel load-spreading plates under the leveling feet; we'll provide these — coordinate final placement with your crew.
Floor-damage responsibility: I need to align on this: if the slab is damaged despite the protection above being followed, how do we handle it?
Confirm whether items 1–2 change your price, and add them as line items.
Please reply with your set method and any cost adjustment, and we'll get it scheduled.
Respectfully,
Lorena Carrillo
On Wed, Jul 1, 2026, 1:16 PM Info at Turnpack <info@turnpack.com> wrote:
Hello team, do you have availability next Friday for the move.
Respectfully,
Lorena Carrillo
On Tue, Jun 9, 2026, 12:22 PM Lorena Carrillo <lcarrillo@turnpack.com> wrote:
Hello team, following up on this is request. Please confirm how far in advance we need to confirm move date.
Thank you for your time,
Lorena Carrillo
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Friday, May 22, 2026 3:21 PM
To: 'Terri Naddy' <terri@tempecrane.com>; 'Dispatch Department' <dispatch@tempecrane.com>; 'paul g' <riggerguy5000@yahoo.com>
Subject: RE: Tempe Crane shop relocation estimate
Great thank you! please see attached bid approval signoff.
When would we have to let you know the move date? We are still looking at mid-to late June and hoping for a Friday move date. So, most likely, the 19th or 26th.
Thank you for your time,
Lorena Carrillo
From: Terri Naddy <terri@tempecrane.com>
Sent: Wednesday, May 20, 2026 3:58 PM
To: lcarrillo@turnpack.com; Dispatch Department <dispatch@tempecrane.com>; paul g <riggerguy5000@yahoo.com>
Subject: Tempe Crane shop relocation estimate
Here you are Lorena
--
Terri Naddy
Dispatch Office Manager | Tempe Crane & Rigging
O: 480.967.0026
terri@tempecrane.com
www.tempecrane.com
1979 E 5th Street, Tempe, AZ 85288
Facebook: Tempe CraneIMPORTANT: Please call our office to schedule jobs or make changes to your scheduled crane/rigging services. Answering phones are our first priority.
por Lorena Carrillo - 02:31 - 8 jul. 2026
Referencia
-
Re: Tempe Crane shop relocation estimate
The manner I would move the machines into place would be with a forklift. If we skated the machines into place on road plates we would not be able to stay on the plates for final positioning of the machines. Some of your equipment does not allow adequate surface area on the bottom to use jacks to remove them from the skates, where it would be permissible, this would also point load the floor. My road plates weigh around 4,000lb and are ideally moved into place with a forklift which would require driving onto the plates to set them. I believe you would probably be better off moving the machines in on air skates to minimize the affected weight on the floor, unfortunately we do not possess those. If you would like for me to do the job with conventional means that we can supply I would do it in the manner mentioned above. We would have you sign a waiver for any damage to the floor and thank you for informing us of the potential danger.Thanks,PAUL GILDON
RIGGING FOREMAN
TEMPE CRANE AND RIGGING
1979 E 5TH STREET
TEMPE AZ. 85288
PHONE 480 967 0026
FAX 480 967 1071
CELL 480 797 9464On Tuesday, July 7, 2026 at 09:11:28 AM MST, Info at Turnpack <info@turnpack.com> wrote:Hello Paula and TerriBefore we schedule, one important condition on the destination floor. The Mesa slab is only 4" thick, and we can't repour before the move, so slab protection needs to be part of the job:Set method— please tell me how you'll move and set each machine inside the building (crane/gantry vs. forklift vs. skates). We want tominimize loaded forklift travel across the slab; prefer crane offload + machinery skates for interior positioning.Load-spreading— lay temporarysteel road plates / crane matsalong the travel path so wheel/skate loads are distributed, and keep loads off control joints and slab edges.Base plates— machines will sit on steel load-spreading plates under the leveling feet; we'll provide these — coordinate final placement with your crew.Floor-damage responsibility: I need to align on this: if the slab is damaged despite the protection above being followed, how do we handle it?Confirm whether items 1–2 change your price, and add them as line items.Please reply with your set method and any cost adjustment, and we'll get it scheduled.Respectfully,
Lorena CarrilloOn Wed, Jul 1, 2026, 1:16 PM Info at Turnpack <info@turnpack.com> wrote:Hello team, do you have availability next Friday for the move.Respectfully,
Lorena CarrilloOn Tue, Jun 9, 2026, 12:22 PM Lorena Carrillo <lcarrillo@turnpack.com> wrote:Hello team, following up on this is request. Please confirm how far in advance we need to confirm move date.
Thank you for your time,
Lorena Carrillo
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Friday, May 22, 2026 3:21 PM
To: 'Terri Naddy' <terri@tempecrane.com>; 'Dispatch Department' <dispatch@tempecrane.com>; 'paul g' <riggerguy5000@yahoo.com>
Subject: RE: Tempe Crane shop relocation estimateGreat thank you! please see attached bid approval signoff.
When would we have to let you know the move date? We are still looking at mid-to late June and hoping for a Friday move date. So, most likely, the 19th or 26th.
Thank you for your time,
Lorena Carrillo
From: Terri Naddy <terri@tempecrane.com>
Sent: Wednesday, May 20, 2026 3:58 PM
To: lcarrillo@turnpack.com; Dispatch Department <dispatch@tempecrane.com>; paul g <riggerguy5000@yahoo.com>
Subject: Tempe Crane shop relocation estimateHere you are Lorena
--
Terri Naddy
Dispatch Office Manager | Tempe Crane & Rigging
O: 480.967.0026
terri@tempecrane.com
www.tempecrane.com
1979 E 5th Street, Tempe, AZ 85288
Facebook: Tempe CraneIMPORTANT: Please call our office to schedule jobs or make changes to your scheduled crane/rigging services. Answering phones are our first priority.
por "paul g" <riggerguy5000@yahoo.com> - 05:31 - 7 jul. 2026
