Info Inbox

Hi Team,

Regarding purchase order PO26211760, our shipment from Toyo is currently in transit to our Colorado warehouse and is expected to arrive early this week.

As soon as the shipment is received, we will work with our warehouse team to process it and get your order shipped out as quickly as possible.

Thank you for your patience.

Jayna Hanselman| Account Coordinator

MSI TEC

e: jayna.hanselman@msitec.com

p: 602-426-1333

w: msitec.com

Thank you for the update. Please correct our ship and bill to as we are moving this week. New bill to/ship is listed below thank you!

Lorena Carrillo

Office Manager

Office: 480-331-1878
Direct Line: 781-938-0069
NEW ADDRESS: 6922 Via Northgate Ste 101, Mesa, AZ 85212

lcarrillo@turnpack.com | www.turnpack.com
https://www.turnpack.com/midas-rework/delidder

Hi Chris

Correct on PO26211760 (7/23 ship date+transit)

Now confirming ship date for PO26261823.

Chris Keller

Western Automation

AZ & NV

602. 802.5061 | Mobile

949. 859.6988 | Office

Chris,

Just to ensure we are all referencing the same order information:

• PO26211760: 300mm x 200mm x 100mm -> new ship date 07/23 + transit time?
• PO26261823: 600mm x 300mm x 150mm -> ship date 07/31 (using 4 week lead time estimate) + transit time?

Chris

On Thu, Jul 16, 2026 at 7:17 AM Chris Keller <chrisk@waisales.com> wrote:

All,  we pinged Toyo for tracking information and have the following update this morning:

 

We're sorry to inform you that this shipment has been postponed to July 23 due to a shortage of the MAS-bracket and motor mount. Please rest assured we are closely following up and doing our best to have the goods ready for shipment as soon as possible.

 

We've let Toyo know we'd prefer to be informed upfront on delivery delays moving forward.

 

 

Chris Keller

Western Automation

AZ & NV

 

602. 802.5061 | Mobile

949. 859.6988 | Office

 

From: Chris Keller
Sent: Wednesday, July 15, 2026 8:30 AM
To: Info at Turnpack <info@turnpack.com>; Jayna Hanselman <jaynah@msitec.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Christopher Berger <cberger@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?

 

Hi Jayna

Did you receive tracking info from Toyo yet?

I just pinged Cindy and Eric at factory to send over in case you have not seen it yet.

 

Chris Keller

Western Automation

AZ & NV

 

602. 802.5061 | Mobile

949. 859.6988 | Office

 

From: Info at Turnpack <info@turnpack.com>
Sent: Tuesday, July 14, 2026 5:32 PM
To: Jayna Hanselman <jaynah@msitec.com>
Cc: Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Christopher Berger <cberger@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?

 

You don't often get email from info@turnpack.com. Learn why this is important

Hello team, any update on this order?

 

Respectfully,
Lorena Carrillo

 

On Mon, Jul 6, 2026, 9:54 AM Jayna Hanselman <jaynah@msitec.com> wrote:

Thank you, Chris!

 

 

Jayna Hanselman| Account Coordinator

MSI TEC

e: jayna.hanselman@msitec.com

p: 602-426-1333

w: msitec.com

 

From: Chris Keller <chrisk@waisales.com>
Sent: Monday, July 6, 2026 9:30 AM
To: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>; Jayna Hanselman <jaynah@msitec.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?

 

 

Hey guys

Hope everyone had a nice holiday weekend.

The ship date from production team was then confirmed July 16, but we have asked them to expedite the order, and they are now targeting shipment on July 10.

We will keep you posted if there any changes. Thanks.

 

 

Chris Keller

Western Automation

AZ & NV

 

602. 802.5061 | Mobile

949. 859.6988 | Office

 

From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Thursday, July 2, 2026 12:29 PM
To: 'Mario Garcia' <mario.garcia@msitec.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?

 

Hello Team please see updated ship date for these parts.

 

 

Thank you for your time,

Lorena Carrillo

 

 

From: Mario Garcia <mario.garcia@msitec.com>
Sent: Monday, June 29, 2026 6:14 PM
To: Christopher Berger <cberger@turnpack.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?

 

Chris,

 

These are meant to work with the 60mm frame Omron motor below; image received by Brandon last week

 

 

Omron Motor [Shaft Diameter = 11mm]:

 

 

From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, June 29, 2026 4:11 PM
To: Mario Garcia <mario.garcia@msitec.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?

 

 

Thanks Mario. These will also work with the Omron motors, correct?

 

@Lorena Carrillo If Mario confirms please proceed and place the order. I will create the project to assign this to.

 

Chris

 

On Mon, Jun 29, 2026 at 4:07 PM Mario Garcia <mario.garcia@msitec.com> wrote:

Brandon,

 

You can proceed with same pricing as before. After we get a Purchase order, TOYO  will generate drawings for you to approve. Shipping after receipt of order is about 4 weeks.

 

X: GLTH12-L12-600-BL-Y40-C4P2

Price: $1,970 each + 10% Tariff

 

Y: GLTH8-L12-300-BL-Y20-C4P2

Price: $1,167 each+ 10% Tariff

 

Z: GLTH5-L6-150-BC-Y10B-C4P2

Price: $970 each + 10% Tariff

 

Estimated Shipping for QTY(1) each above is ~$250 total

4 week Lead Time

 

 

MARIO GARCIA | FIELD AUTOMATION ENGINEER

MSITEC

e: mario.garcia@msitec.com

p: 602.426.1333 | c: 480.299.4701

w: msitec.com

 

 

From: Brandon Benavidez <bbenavidez@turnpack.com>
Sent: Tuesday, June 23, 2026 8:32 AM
To: Chris Keller <chrisk@waisales.com>; Mario Garcia <mario.garcia@msitec.com>
Cc: Christopher Berger <cberger@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?

 

 

Chris/Mario,

 

Yesterday, we were able to look more closely at the 24" x 36" [FactoryRobot] machine and found one small change we'd like to make. When you get a chance, please update the quote to include the following changes (including those needed for the appropriate motor mounting). Since this is just for the actuators, can you ensure they will work with our current Omron motors? The CAD I currently have for the actuators lacks the appropriate mounting. I've included the Omron motor drawing below for reference.

 

Actuator Part Numbers:

X: GLTH12-L12-600-BL-Y40-C4P2

Y: GLTH8-L12-300-BL-Y20-C4P2_0  [Previously was: GLTH8-L12-300-BR-Y20-C4P2_0]

Z: GLTH5-L6-150-BC-Y10B-C4P2_0

 

Omron Motor [Shaft Diameter = 11mm]:

 

Please let us know if you need anything additional. Thank you

 

Best regards,

 

Brandon Benavidez - Mechanical Engineer

Turnpack, LLC

Phone #: 1 (480) 276-2897

 

 

On Mon, Jun 22, 2026 at 6:53 AM Chris Keller <chrisk@waisales.com> wrote:

Hello all

 

The estimated ship date from Toyo for the ordered actuators for 19”x20” FactoryLab is 7/11.

@Mario Garcia – Cindy at Toyo will have tracking on/by July 11^th.

 

@Christopher Berger/@Lorena Carrillo – did you place the PO for the actuators for 24”x36” FactoryRobot with MSI on Friday?

 

Chris Keller

Western Automation

AZ & NV

 

602. 802.5061 | Mobile

949. 859.6988 | Office

 

From: Chris Keller
Sent: Friday, June 19, 2026 11:00 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and Drives

 

Good to hear on the 24” x 36”.

 

Totally understand the time constraint issue.

 

Checking on that PO placed on 6/10 and will provide delivery update by Monday.

 

Chris Keller

Western Automation

AZ & NV

 

602. 802.5061 | Mobile

949. 859.6988 | Office

 

From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, June 18, 2026 9:40 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and Drives

 

The 24" x 36" will be finalized tomorrow. For the last two weeks we had 0 availability to work on this project and I had hoped to get the orders in before.

 

Can you confirm that order PO26211760, placed on 06/10 for the 21" x 19" is being processed and still expected to arrive on 07/08?

 

Chris

 

On Wed, Jun 17, 2026 at 9:13 AM Chris Keller <chrisk@waisales.com> wrote:

Thanks for the reply and update Lorena.

@'Christopher Berger' is the one to approve.

 

From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Tuesday, June 16, 2026 6:12 PM
To: Chris Keller <chrisk@waisales.com>; 'Christopher Berger' <cberger@turnpack.com>; 'Mario Garcia' <mario.garcia@msitec.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and Drives

 

Hi no I have not placed the PO yet. Please confirm final approval.

 

Thank you for your time,

Lorena Carrillo

 

 

From: Chris Keller <chrisk@waisales.com>
Sent: Tuesday, June 16, 2026 7:25 AM
To: Christopher Berger <cberger@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and Drives

 

Good morning Chris and team,

Have you placed the below order with Mario/MSI TEC?

With this, we should have the two XYZ systems (19x20” and 24x36” — Factory Lab and Factory Robot) covered.

I’ll check on delivery dates with Toyo today.

The remaining item is the FactoryCube XXYY. I’ll send a separate note on that shortly.

 

Chris Keller

Western Automation

AZ & NV

 

602. 802.5061 | Mobile

949. 859.6988 | Office

 

From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, June 10, 2026 9:28 AM
To: Mario Garcia <mario.garcia@msitec.com>
Cc: Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and Drives

 

Mario,

 

we'll place the order for these stages by tomorrow:

X: GLTH12-L12-600-BL-Y40-C4P2

Price: $1,970 each + 10% Tariff

 

Y: GLTH8-L12-300-BR-Y20-C4P2

Price: $1,167 each+ 10% Tariff

 

Z: GLTH5-L6-150-BC-Y10B-C4P2

Price: $970 each + 10% Tariff

 

Estimated Shipping for QTY(1) each above is ~$250 total

4 week Lead Time

 

 

Chris

 

On Mon, Jun 8, 2026 at 4:00 PM Mario Garcia <mario.garcia@msitec.com> wrote:

 

Chris,

 

Pricing below for Actuators Only. I do also provide a ball park price on a MultiAxisSystem version. If its within budget, we can send you a formal quote and 3D file for the MultiAxis System; we need commitment from the customer of an upcoming purchase as this take some engineering time to prepare.

 

X: GLTH12-L12-600-BL-Y40-C4P2

Price: $1,970 each + 10% Tariff

 

Y: GLTH8-L12-300-BR-Y20-C4P2

Price: $1,167 each+ 10% Tariff

 

Z: GLTH5-L6-150-BC-Y10B-C4P2

Price: $970 each + 10% Tariff

 

Estimated Shipping for QTY(1) each above is ~$250 total

4 week Lead Time

 

 

 

 

Multi Axis System Price ~$5,300 + 10% Tariff + $500 Shipping 5 to 6 weeks Lead Time.

 

 

Catalog Download Ball Screw Linear Actuator - GLTH Series

 

 

MARIO GARCIA | FIELD AUTOMATION ENGINEER

MSITEC

e: mario.garcia@msitec.com

p: 602.426.1333 | c: 480.299.4701

w: msitec.com

 

 

 

From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, June 8, 2026 7:21 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and Drives

 

 

Chris,

 

for the 36"x24" Cantilever gantry the way I see this is:
X: GLTH12-L12-600-BL-Y40-C4P2

Y: GLTH8-L12-300-BR-Y20-C4P2

Z: GLTH5-L6-150-BC-Y10B-C4P2

 

I picked Yaskawa motors but for the time being, I guess we'll buy without motors and single stages. I didn't see on the website where it would show me the specs for these stages. Can you send them to me?

 

Chris

 

On Fri, Jun 5, 2026 at 10:08 AM Chris Keller <chrisk@waisales.com> wrote:

Sounds good, please let us know if anything is unclear, we know you need this quickly, you mentioned this one is more urgent than the 19X20” Factory Lab…

 

Chris Keller

Western Automation

AZ & NV

 

602. 802.5061 | Mobile

949. 859.6988 | Office

 

From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, June 4, 2026 10:59 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and Drives

 

Chris,

 

We are looking at the CAD today and hopefully will have an answer EOD. We must attach the motors to these part numbers to determine the full length before making a decision.

 

Chris

 

On Thu, Jun 4, 2026 at 7:50 AM Chris Keller <chrisk@waisales.com> wrote:

Hi Chris

Please verify the open bullets today so we can complete the part number and issue correct quote

We have pricing ready and can send as soon as you confirm.

 

Chris Keller

Western Automation

AZ & NV

 

602. 802.5061 | Mobile

949. 859.6988 | Office

 

From: doug@toyorobot.com <doug@toyorobot.com>
Sent: Wednesday, June 3, 2026 5:02 PM
To: Sacha Marcroft <sacham@waisales.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Mario Garcia' <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; 'Brandon Benavidez' <bbenavidez@turnpack.com>; 'Lorena Carrillo' <lcarrillo@turnpack.com>; 'TOYO TA1' <ta1@toyorobot.com>; 'Eric Zeng' <ericzeng@toyorobotics.com>; 'Doug Kiernan' <doug@toyorobotics.com>
Subject: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and Drives

 

Chris B,

 

As a follow up to our meeting today.

Here are options for a 24x36 envelope cantilvered system.

Standard actuator leadtime ~3-4 weeks

Create MAS Kit +1-2 weeks.

Catalog section attached.

You can download models here – https://toyo.partcommunity.com/

 

GLTH12-L?-600-B?-M40-E5

Pick lead, 6, 12, 24mm

600mm stroke = 873mm (34.3”) OAL

Confirm motor position, BL/BR/BM

Confirm motor mount

 

GLTH8-L?-300-B?-M40-E5

Pick lead, 6, 12, 24mm

300mm stroke = 592mm (23.3”) OAL

Confirm motor position, BL/BR/BM

Confirm motor mount

 

GLTH5-L?-150-B?-M40-E5

Pick lead, 2, 6, 12, 20mm

Confirm motor position, BL/BR/BM – do you need parallel mount or is in-line, BC okay?

Confirm motor mount

 

Do you want any limit or home sensors?

 

Regards,
Doug Kiernan

TOYO Automation

415.264.9787

 

*Please note my new email and update your CRM: doug@toyorobotics.com 

New TOYO Robotics Americas website going live soon! 

 

From: Sacha Marcroft <sacham@waisales.com>
Sent: Friday, May 22, 2026 11:15 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>; doug@toyorobot.com; TOYO TA1 <ta1@toyorobot.com>; Eric Zeng <ericzeng@toyorobotics.com>
Subject: RE: Place holder for todays call - second system with Motors and Drives

 

Yeah sure we discussed potentially having a traveler on X so was looking at the clearance. With traveler we don’t need the GTH12 since we are splitting the load. The Gth8 Carriage is 160mm (sorry mentioned 120mm that was incorrect) and Z is roughly 55mm wide. We can add an undriven GTH5 traveler (very smooth) traveler or profile so there is no interfere with Y and Z axis on the traveler side.

 

Rough concept shows profile rail but we use our actuators as travelers as well.

 

 

Sacha Marcroft

VP Motion Division

Western Automation 

714-473-4883

 

From: Christopher Berger <cberger@turnpack.com>
Sent: Friday, May 22, 2026 10:45 AM
To: Sacha Marcroft <sacham@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>; doug@toyorobot.com; TOYO TA1 <ta1@toyorobot.com>; Eric Zeng <ericzeng@toyorobotics.com>
Subject: Re: Place holder for todays call - second system with Motors and Drives

 

Thanks Sacha. Looking at the model and your email you are proposing a T-style gantry which we would prefer for clearance reasons but can you briefly explain what you mean by this bullet point?

 

• GTH8 with motor wrap and 600mm travel is 35” long.  Carriage is 120mm and the Width 80mm so traveler or X’ would fit nicely below.

 

Thanks

Chris

 

On Fri, May 22, 2026 at 9:19 AM Sacha Marcroft <sacham@waisales.com> wrote:

Hey Gents,

First pass at the larger T stage. T stage Spec’s below and potential solution stages reviewed. Let me know your initial thoughts then we will move to providing a MAS quote.

Attached is the XY potential using GTH12 on x and GTH8 on Y for the 36”x 24” plate.

•  
• XYZ Ballscrew stages for 36" x 24" baseplate without motors (we have/can get Omron Servo Motors)
• XYZ Ballscrew stages for 36" x 24" baseplate with motors
• MAS Ballscrew system for 36" x 24" with Motors
• Option: Add Linear encoder

36” long axis:

• GTH12 with motor wrap and 600mm travel is 34.4” long
• GTH12 with motor wrap and 650mm travel is 36.35” long

 

• GTH8 with motor wrap and 600mm travel is 35” long.  Carriage is 120mm and the Width 80mm so traveler or X’ would fit nicely below.

 

24” axis:

• GTH8 with motor wrap and 300mm travel is 23.26” long. 

 

6” Z axis:

• GTH5 with motor wrap and 150mm travel is 14.25” long.  With motor wrap we need to consider 60mm motor mount. I am sure they have made one but need to check. The stage is 52mm wide model shows a 100w motor

 

 

 

 

Sacha Marcroft

VP Motion Division

Western Automation 

714-473-4883

 

From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, May 21, 2026 3:49 PM
To: Sacha Marcroft <sacham@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Place holder for todays call - second system with Motors and Drives

 

Just to summarize this one more time:

 

• FactoryLab

• XYZ Ballscrew stages for 20" x 19" baseplate without motors (we have/can get Omron Servo Motors) -> We are ready to order
• XYZ Ballscrew stages for 20" x 19" baseplate with motors
• MAS Ballscrew system for 20" x 19" with Motors
• Option: Add Linear encoder

• FactoryCube

• XYZ Gantry Linear stages: 400mm dual Y, 500mm X, 150mm Z
• XYZ Gantry Ballscrew stages:  400mm dual Y, 500mm X, 150mm Z
• XXYY Wafer table: ballscrew 350mm min travel for 12" wafer -> We are ready to order
• Option: Add Linear Encoder to Ballscrew stages

• FactoryRobot:

• XYZ Ballscrew stages for 36" x 24" baseplate without motors (we have/can get Omron Servo Motors)
• XYZ Ballscrew stages for 36" x 24" baseplate with motors
• MAS Ballscrew system for 36" x 24" with Motors
• Option: Add Linear encoder

What we will place orders for depends on lead time and pricing but I am interested to get lead time and pricing for all listed items.

 

Chris

 

 

On Thu, May 21, 2026 at 1:28 PM Sacha Marcroft <sacham@waisales.com> wrote:

Let me know if this time slot fits and if not make recommendations for another slot.

 

Thanks,

 

 

________________________________________________________________________________

Microsoft Teams meeting

Join: https://teams.microsoft.com/meet/22724347533288?p=7WD23c1bUy1XsnfPNX

Meeting ID: 227 243 475 332 88

Passcode: 7dg33tp2

---

Need help? | System reference

Dial in by phone

+1 469-998-7643,,99664092# United States, Dallas

Find a local number

Phone conference ID: 996 640 92#

For organizers: Meeting options | Reset dial-in PIN

________________________________________________________________________________

 

 

--

Christopher Berger

Phone: +1 (480) 331-1878

Cell: +1 (480) 273-4686

cberger@turnpack.com | www.turnpack.com

 

 

--

Christopher Berger

Phone: +1 (480) 331-1878

Cell: +1 (480) 273-4686

cberger@turnpack.com | www.turnpack.com

 

 

--

Christopher Berger

Phone: +1 (480) 331-1878

Cell: +1 (480) 273-4686

cberger@turnpack.com | www.turnpack.com

 

 

--

Christopher Berger

Phone: +1 (480) 331-1878

Cell: +1 (480) 273-4686

cberger@turnpack.com | www.turnpack.com

 

CONFIDENTIALITY NOTICE: This e-mail transmission and any documents, files or previous messages attached to it may contain confidential or legally privileged information. If you are not the intended recipient, you are hereby notified that you must not read this transmission and that any disclosure, copying, printing, distribution or use of any of the information contained in or attached to this transmission is strictly prohibited. If you received this transmission in error, please immediately notify the sender by telephone or return e-mail and delete the original transmission and its attachments without reading or saving in any manner.

 

--

Christopher Berger

Phone: +1 (480) 331-1878

Cell: +1 (480) 273-4686

cberger@turnpack.com | www.turnpack.com

 

 

--

Christopher Berger

Phone: +1 (480) 331-1878

Cell: +1 (480) 273-4686

cberger@turnpack.com | www.turnpack.com

 

 

--

Christopher Berger

Phone: +1 (480) 331-1878

Cell: +1 (480) 273-4686

cberger@turnpack.com | www.turnpack.com

 

--

Christopher Berger

Phone: +1 (480) 331-1878

Cell: +1 (480) 273-4686

cberger@turnpack.com | www.turnpack.com

Update:

For PO26261823 we got a first estimated ship date back for 8/20.

We pushed back and asked to pull this into earlier August if possible.

The part number change/finalization delayed the final production order entry to earlier this week, which is why we see the initial 8/20 date (5 weeks).

Let’s see if we can pull this in 1-2 weeks.

Do you have a deadline or urgency?

Hi Chris

Correct on PO26211760 (7/23 ship date+transit)

Now confirming ship date for PO26261823.

Chris Keller

Western Automation

AZ & NV

602. 802.5061 | Mobile

949. 859.6988 | Office

Chris,

Just to ensure we are all referencing the same order information:

• PO26211760: 300mm x 200mm x 100mm -> new ship date 07/23 + transit time?
• PO26261823: 600mm x 300mm x 150mm -> ship date 07/31 (using 4 week lead time estimate) + transit time?

Chris

On Thu, Jul 16, 2026 at 7:17 AM Chris Keller <chrisk@waisales.com> wrote:

All,  we pinged Toyo for tracking information and have the following update this morning:

 

We're sorry to inform you that this shipment has been postponed to July 23 due to a shortage of the MAS-bracket and motor mount. Please rest assured we are closely following up and doing our best to have the goods ready for shipment as soon as possible.

 

We've let Toyo know we'd prefer to be informed upfront on delivery delays moving forward.

 

 

Chris Keller

Western Automation

AZ & NV

 

602. 802.5061 | Mobile

949. 859.6988 | Office

 

From: Chris Keller
Sent: Wednesday, July 15, 2026 8:30 AM
To: Info at Turnpack <info@turnpack.com>; Jayna Hanselman <jaynah@msitec.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Christopher Berger <cberger@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?

 

Hi Jayna

Did you receive tracking info from Toyo yet?

I just pinged Cindy and Eric at factory to send over in case you have not seen it yet.

 

Chris Keller

Western Automation

AZ & NV

 

602. 802.5061 | Mobile

949. 859.6988 | Office

 

From: Info at Turnpack <info@turnpack.com>
Sent: Tuesday, July 14, 2026 5:32 PM
To: Jayna Hanselman <jaynah@msitec.com>
Cc: Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Christopher Berger <cberger@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?

 

You don't often get email from info@turnpack.com. Learn why this is important

Hello team, any update on this order?

 

Respectfully,
Lorena Carrillo

 

On Mon, Jul 6, 2026, 9:54 AM Jayna Hanselman <jaynah@msitec.com> wrote:

Thank you, Chris!

 

 

Jayna Hanselman| Account Coordinator

MSI TEC

e: jayna.hanselman@msitec.com

p: 602-426-1333

w: msitec.com

 

From: Chris Keller <chrisk@waisales.com>
Sent: Monday, July 6, 2026 9:30 AM
To: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>; Jayna Hanselman <jaynah@msitec.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?

 

 

Hey guys

Hope everyone had a nice holiday weekend.

The ship date from production team was then confirmed July 16, but we have asked them to expedite the order, and they are now targeting shipment on July 10.

We will keep you posted if there any changes. Thanks.

 

 

Chris Keller

Western Automation

AZ & NV

 

602. 802.5061 | Mobile

949. 859.6988 | Office

 

From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Thursday, July 2, 2026 12:29 PM
To: 'Mario Garcia' <mario.garcia@msitec.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?

 

Hello Team please see updated ship date for these parts.

 

 

Thank you for your time,

Lorena Carrillo

 

 

From: Mario Garcia <mario.garcia@msitec.com>
Sent: Monday, June 29, 2026 6:14 PM
To: Christopher Berger <cberger@turnpack.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?

 

Chris,

 

These are meant to work with the 60mm frame Omron motor below; image received by Brandon last week

 

 

Omron Motor [Shaft Diameter = 11mm]:

 

 

From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, June 29, 2026 4:11 PM
To: Mario Garcia <mario.garcia@msitec.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?

 

 

Thanks Mario. These will also work with the Omron motors, correct?

 

@Lorena Carrillo If Mario confirms please proceed and place the order. I will create the project to assign this to.

 

Chris

 

On Mon, Jun 29, 2026 at 4:07 PM Mario Garcia <mario.garcia@msitec.com> wrote:

Brandon,

 

You can proceed with same pricing as before. After we get a Purchase order, TOYO  will generate drawings for you to approve. Shipping after receipt of order is about 4 weeks.

 

X: GLTH12-L12-600-BL-Y40-C4P2

Price: $1,970 each + 10% Tariff

 

Y: GLTH8-L12-300-BL-Y20-C4P2

Price: $1,167 each+ 10% Tariff

 

Z: GLTH5-L6-150-BC-Y10B-C4P2

Price: $970 each + 10% Tariff

 

Estimated Shipping for QTY(1) each above is ~$250 total

4 week Lead Time

 

 

MARIO GARCIA | FIELD AUTOMATION ENGINEER

MSITEC

e: mario.garcia@msitec.com

p: 602.426.1333 | c: 480.299.4701

w: msitec.com

 

 

From: Brandon Benavidez <bbenavidez@turnpack.com>
Sent: Tuesday, June 23, 2026 8:32 AM
To: Chris Keller <chrisk@waisales.com>; Mario Garcia <mario.garcia@msitec.com>
Cc: Christopher Berger <cberger@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?

 

 

Chris/Mario,

 

Yesterday, we were able to look more closely at the 24" x 36" [FactoryRobot] machine and found one small change we'd like to make. When you get a chance, please update the quote to include the following changes (including those needed for the appropriate motor mounting). Since this is just for the actuators, can you ensure they will work with our current Omron motors? The CAD I currently have for the actuators lacks the appropriate mounting. I've included the Omron motor drawing below for reference.

 

Actuator Part Numbers:

X: GLTH12-L12-600-BL-Y40-C4P2

Y: GLTH8-L12-300-BL-Y20-C4P2_0  [Previously was: GLTH8-L12-300-BR-Y20-C4P2_0]

Z: GLTH5-L6-150-BC-Y10B-C4P2_0

 

Omron Motor [Shaft Diameter = 11mm]:

 

Please let us know if you need anything additional. Thank you

 

Best regards,

 

Brandon Benavidez - Mechanical Engineer

Turnpack, LLC

Phone #: 1 (480) 276-2897

 

 

On Mon, Jun 22, 2026 at 6:53 AM Chris Keller <chrisk@waisales.com> wrote:

Hello all

 

The estimated ship date from Toyo for the ordered actuators for 19”x20” FactoryLab is 7/11.

@Mario Garcia – Cindy at Toyo will have tracking on/by July 11^th.

 

@Christopher Berger/@Lorena Carrillo – did you place the PO for the actuators for 24”x36” FactoryRobot with MSI on Friday?

 

Chris Keller

Western Automation

AZ & NV

 

602. 802.5061 | Mobile

949. 859.6988 | Office

 

From: Chris Keller
Sent: Friday, June 19, 2026 11:00 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and Drives

 

Good to hear on the 24” x 36”.

 

Totally understand the time constraint issue.

 

Checking on that PO placed on 6/10 and will provide delivery update by Monday.

 

Chris Keller

Western Automation

AZ & NV

 

602. 802.5061 | Mobile

949. 859.6988 | Office

 

From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, June 18, 2026 9:40 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and Drives

 

The 24" x 36" will be finalized tomorrow. For the last two weeks we had 0 availability to work on this project and I had hoped to get the orders in before.

 

Can you confirm that order PO26211760, placed on 06/10 for the 21" x 19" is being processed and still expected to arrive on 07/08?

 

Chris

 

On Wed, Jun 17, 2026 at 9:13 AM Chris Keller <chrisk@waisales.com> wrote:

Thanks for the reply and update Lorena.

@'Christopher Berger' is the one to approve.

 

From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Tuesday, June 16, 2026 6:12 PM
To: Chris Keller <chrisk@waisales.com>; 'Christopher Berger' <cberger@turnpack.com>; 'Mario Garcia' <mario.garcia@msitec.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and Drives

 

Hi no I have not placed the PO yet. Please confirm final approval.

 

Thank you for your time,

Lorena Carrillo

 

 

From: Chris Keller <chrisk@waisales.com>
Sent: Tuesday, June 16, 2026 7:25 AM
To: Christopher Berger <cberger@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and Drives

 

Good morning Chris and team,

Have you placed the below order with Mario/MSI TEC?

With this, we should have the two XYZ systems (19x20” and 24x36” — Factory Lab and Factory Robot) covered.

I’ll check on delivery dates with Toyo today.

The remaining item is the FactoryCube XXYY. I’ll send a separate note on that shortly.

 

Chris Keller

Western Automation

AZ & NV

 

602. 802.5061 | Mobile

949. 859.6988 | Office

 

From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, June 10, 2026 9:28 AM
To: Mario Garcia <mario.garcia@msitec.com>
Cc: Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and Drives

 

Mario,

 

we'll place the order for these stages by tomorrow:

X: GLTH12-L12-600-BL-Y40-C4P2

Price: $1,970 each + 10% Tariff

 

Y: GLTH8-L12-300-BR-Y20-C4P2

Price: $1,167 each+ 10% Tariff

 

Z: GLTH5-L6-150-BC-Y10B-C4P2

Price: $970 each + 10% Tariff

 

Estimated Shipping for QTY(1) each above is ~$250 total

4 week Lead Time

 

 

Chris

 

On Mon, Jun 8, 2026 at 4:00 PM Mario Garcia <mario.garcia@msitec.com> wrote:

 

Chris,

 

Pricing below for Actuators Only. I do also provide a ball park price on a MultiAxisSystem version. If its within budget, we can send you a formal quote and 3D file for the MultiAxis System; we need commitment from the customer of an upcoming purchase as this take some engineering time to prepare.

 

X: GLTH12-L12-600-BL-Y40-C4P2

Price: $1,970 each + 10% Tariff

 

Y: GLTH8-L12-300-BR-Y20-C4P2

Price: $1,167 each+ 10% Tariff

 

Z: GLTH5-L6-150-BC-Y10B-C4P2

Price: $970 each + 10% Tariff

 

Estimated Shipping for QTY(1) each above is ~$250 total

4 week Lead Time

 

 

 

 

Multi Axis System Price ~$5,300 + 10% Tariff + $500 Shipping 5 to 6 weeks Lead Time.

 

 

Catalog Download Ball Screw Linear Actuator - GLTH Series

 

 

MARIO GARCIA | FIELD AUTOMATION ENGINEER

MSITEC

e: mario.garcia@msitec.com

p: 602.426.1333 | c: 480.299.4701

w: msitec.com

 

 

 

From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, June 8, 2026 7:21 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and Drives

 

 

Chris,

 

for the 36"x24" Cantilever gantry the way I see this is:
X: GLTH12-L12-600-BL-Y40-C4P2

Y: GLTH8-L12-300-BR-Y20-C4P2

Z: GLTH5-L6-150-BC-Y10B-C4P2

 

I picked Yaskawa motors but for the time being, I guess we'll buy without motors and single stages. I didn't see on the website where it would show me the specs for these stages. Can you send them to me?

 

Chris

 

On Fri, Jun 5, 2026 at 10:08 AM Chris Keller <chrisk@waisales.com> wrote:

Sounds good, please let us know if anything is unclear, we know you need this quickly, you mentioned this one is more urgent than the 19X20” Factory Lab…

 

Chris Keller

Western Automation

AZ & NV

 

602. 802.5061 | Mobile

949. 859.6988 | Office

 

From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, June 4, 2026 10:59 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and Drives

 

Chris,

 

We are looking at the CAD today and hopefully will have an answer EOD. We must attach the motors to these part numbers to determine the full length before making a decision.

 

Chris

 

On Thu, Jun 4, 2026 at 7:50 AM Chris Keller <chrisk@waisales.com> wrote:

Hi Chris

Please verify the open bullets today so we can complete the part number and issue correct quote

We have pricing ready and can send as soon as you confirm.

 

Chris Keller

Western Automation

AZ & NV

 

602. 802.5061 | Mobile

949. 859.6988 | Office

 

From: doug@toyorobot.com <doug@toyorobot.com>
Sent: Wednesday, June 3, 2026 5:02 PM
To: Sacha Marcroft <sacham@waisales.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Mario Garcia' <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; 'Brandon Benavidez' <bbenavidez@turnpack.com>; 'Lorena Carrillo' <lcarrillo@turnpack.com>; 'TOYO TA1' <ta1@toyorobot.com>; 'Eric Zeng' <ericzeng@toyorobotics.com>; 'Doug Kiernan' <doug@toyorobotics.com>
Subject: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and Drives

 

Chris B,

 

As a follow up to our meeting today.

Here are options for a 24x36 envelope cantilvered system.

Standard actuator leadtime ~3-4 weeks

Create MAS Kit +1-2 weeks.

Catalog section attached.

You can download models here – https://toyo.partcommunity.com/

 

GLTH12-L?-600-B?-M40-E5

Pick lead, 6, 12, 24mm

600mm stroke = 873mm (34.3”) OAL

Confirm motor position, BL/BR/BM

Confirm motor mount

 

GLTH8-L?-300-B?-M40-E5

Pick lead, 6, 12, 24mm

300mm stroke = 592mm (23.3”) OAL

Confirm motor position, BL/BR/BM

Confirm motor mount

 

GLTH5-L?-150-B?-M40-E5

Pick lead, 2, 6, 12, 20mm

Confirm motor position, BL/BR/BM – do you need parallel mount or is in-line, BC okay?

Confirm motor mount

 

Do you want any limit or home sensors?

 

Regards,
Doug Kiernan

TOYO Automation

415.264.9787

 

*Please note my new email and update your CRM: doug@toyorobotics.com 

New TOYO Robotics Americas website going live soon! 

 

From: Sacha Marcroft <sacham@waisales.com>
Sent: Friday, May 22, 2026 11:15 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>; doug@toyorobot.com; TOYO TA1 <ta1@toyorobot.com>; Eric Zeng <ericzeng@toyorobotics.com>
Subject: RE: Place holder for todays call - second system with Motors and Drives

 

Yeah sure we discussed potentially having a traveler on X so was looking at the clearance. With traveler we don’t need the GTH12 since we are splitting the load. The Gth8 Carriage is 160mm (sorry mentioned 120mm that was incorrect) and Z is roughly 55mm wide. We can add an undriven GTH5 traveler (very smooth) traveler or profile so there is no interfere with Y and Z axis on the traveler side.

 

Rough concept shows profile rail but we use our actuators as travelers as well.

 

 

Sacha Marcroft

VP Motion Division

Western Automation 

714-473-4883

 

From: Christopher Berger <cberger@turnpack.com>
Sent: Friday, May 22, 2026 10:45 AM
To: Sacha Marcroft <sacham@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>; doug@toyorobot.com; TOYO TA1 <ta1@toyorobot.com>; Eric Zeng <ericzeng@toyorobotics.com>
Subject: Re: Place holder for todays call - second system with Motors and Drives

 

Thanks Sacha. Looking at the model and your email you are proposing a T-style gantry which we would prefer for clearance reasons but can you briefly explain what you mean by this bullet point?

 

• GTH8 with motor wrap and 600mm travel is 35” long.  Carriage is 120mm and the Width 80mm so traveler or X’ would fit nicely below.

 

Thanks

Chris

 

On Fri, May 22, 2026 at 9:19 AM Sacha Marcroft <sacham@waisales.com> wrote:

Hey Gents,

First pass at the larger T stage. T stage Spec’s below and potential solution stages reviewed. Let me know your initial thoughts then we will move to providing a MAS quote.

Attached is the XY potential using GTH12 on x and GTH8 on Y for the 36”x 24” plate.

•  
• XYZ Ballscrew stages for 36" x 24" baseplate without motors (we have/can get Omron Servo Motors)
• XYZ Ballscrew stages for 36" x 24" baseplate with motors
• MAS Ballscrew system for 36" x 24" with Motors
• Option: Add Linear encoder

36” long axis:

• GTH12 with motor wrap and 600mm travel is 34.4” long
• GTH12 with motor wrap and 650mm travel is 36.35” long

 

• GTH8 with motor wrap and 600mm travel is 35” long.  Carriage is 120mm and the Width 80mm so traveler or X’ would fit nicely below.

 

24” axis:

• GTH8 with motor wrap and 300mm travel is 23.26” long. 

 

6” Z axis:

• GTH5 with motor wrap and 150mm travel is 14.25” long.  With motor wrap we need to consider 60mm motor mount. I am sure they have made one but need to check. The stage is 52mm wide model shows a 100w motor

 

 

 

 

Sacha Marcroft

VP Motion Division

Western Automation 

714-473-4883

 

From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, May 21, 2026 3:49 PM
To: Sacha Marcroft <sacham@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Place holder for todays call - second system with Motors and Drives

 

Just to summarize this one more time:

 

• FactoryLab

• XYZ Ballscrew stages for 20" x 19" baseplate without motors (we have/can get Omron Servo Motors) -> We are ready to order
• XYZ Ballscrew stages for 20" x 19" baseplate with motors
• MAS Ballscrew system for 20" x 19" with Motors
• Option: Add Linear encoder

• FactoryCube

• XYZ Gantry Linear stages: 400mm dual Y, 500mm X, 150mm Z
• XYZ Gantry Ballscrew stages:  400mm dual Y, 500mm X, 150mm Z
• XXYY Wafer table: ballscrew 350mm min travel for 12" wafer -> We are ready to order
• Option: Add Linear Encoder to Ballscrew stages

• FactoryRobot:

• XYZ Ballscrew stages for 36" x 24" baseplate without motors (we have/can get Omron Servo Motors)
• XYZ Ballscrew stages for 36" x 24" baseplate with motors
• MAS Ballscrew system for 36" x 24" with Motors
• Option: Add Linear encoder

What we will place orders for depends on lead time and pricing but I am interested to get lead time and pricing for all listed items.

 

Chris

 

 

On Thu, May 21, 2026 at 1:28 PM Sacha Marcroft <sacham@waisales.com> wrote:

Let me know if this time slot fits and if not make recommendations for another slot.

 

Thanks,

 

 

________________________________________________________________________________

Microsoft Teams meeting

Join: https://teams.microsoft.com/meet/22724347533288?p=7WD23c1bUy1XsnfPNX

Meeting ID: 227 243 475 332 88

Passcode: 7dg33tp2

---

Need help? | System reference

Dial in by phone

+1 469-998-7643,,99664092# United States, Dallas

Find a local number

Phone conference ID: 996 640 92#

For organizers: Meeting options | Reset dial-in PIN

________________________________________________________________________________

 

 

--

Christopher Berger

Phone: +1 (480) 331-1878

Cell: +1 (480) 273-4686

cberger@turnpack.com | www.turnpack.com

 

 

--

Christopher Berger

Phone: +1 (480) 331-1878

Cell: +1 (480) 273-4686

cberger@turnpack.com | www.turnpack.com

 

 

--

Christopher Berger

Phone: +1 (480) 331-1878

Cell: +1 (480) 273-4686

cberger@turnpack.com | www.turnpack.com

 

 

--

Christopher Berger

Phone: +1 (480) 331-1878

Cell: +1 (480) 273-4686

cberger@turnpack.com | www.turnpack.com

 

CONFIDENTIALITY NOTICE: This e-mail transmission and any documents, files or previous messages attached to it may contain confidential or legally privileged information. If you are not the intended recipient, you are hereby notified that you must not read this transmission and that any disclosure, copying, printing, distribution or use of any of the information contained in or attached to this transmission is strictly prohibited. If you received this transmission in error, please immediately notify the sender by telephone or return e-mail and delete the original transmission and its attachments without reading or saving in any manner.

 

--

Christopher Berger

Phone: +1 (480) 331-1878

Cell: +1 (480) 273-4686

cberger@turnpack.com | www.turnpack.com

 

 

--

Christopher Berger

Phone: +1 (480) 331-1878

Cell: +1 (480) 273-4686

cberger@turnpack.com | www.turnpack.com

 

 

--

Christopher Berger

Phone: +1 (480) 331-1878

Cell: +1 (480) 273-4686

cberger@turnpack.com | www.turnpack.com

 

--

Christopher Berger

Phone: +1 (480) 331-1878

Cell: +1 (480) 273-4686

cberger@turnpack.com | www.turnpack.com