Archives
Info Inbox
info@turnpack.com
-
Equipment Help
Hi Chris,
This is Noah Ekstrom at Henkel. We're having some issues with our Datacon (you've helped with it in the past) and could use any urgent troubleshooting support you could provide.
We're getting a wafer camera error and need to figure out if it's a motor, sensor, or easy fix.
Please reach out via email or phone (9492415407)
Noah Ekstrom
by "Noah C Ekstrom" <noah.c.ekstrom@henkel.com> - 01:56 - 8 Sep 2026-
Re: Equipment Help
HI Noah,I am at a customer today but I'll try to call you. In the meantime can you give me some more info on the error and the behavior?ChrisOn Tue, Sep 8, 2026 at 10:54 AM Noah C Ekstrom <noah.c.ekstrom@henkel.com> wrote:
Hi Chris,
This is Noah Ekstrom at Henkel. We're having some issues with our Datacon (you've helped with it in the past) and could use any urgent troubleshooting support you could provide.
We're getting a wafer camera error and need to figure out if it's a motor, sensor, or easy fix.
Please reach out via email or phone (9492415407)
Noah Ekstrom--Christopher Berger
by Chris Berger - 02:01 - 8 Sep 2026-
RE: [EXT] Re: Equipment Help
Hi Guys,
I’ll just pop in to say that the current error (different than the previous error when the camera was stuck all the way up) indicates that the trouble initializing the camera is “mechanical”.
Best,
David
From: Noah C Ekstrom <noah.c.ekstrom@henkel.com>
Sent: Tuesday, September 8, 2026 11:18 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Chris Berger (Ext@turnpack.com) <info@turnpack.com>; David Grimes <david.grimes@henkel.com>
Subject: RE: [EXT] Re: Equipment HelpThank you!
First instance was a user trying to auto focus the wafer during teaching on Wednesday. The camera went up and didn’t stop till it reached limit. Error message that kept popping up was “Initialization of wafer camera failed”. In the log it was showing SmEsLiftSys and SmWcFocusSys get position errors and no origin defined. It enters e-stop after the initialization fails.
Ultimately, David was able to pull down a bit on the camera unit and then it rehomed. That was on Friday, but nobody used the tool to try actual operation (just homed it a few times).
Today someone tried to use the machine and it homed, did pickup and seemed fine, but during first build it also spit out the initialization failure. We have tried moving the unit and it doesn’t want to home consistently. Sometimes it homes once but usually it fails. The camera focus doesn’t jog consistently in the troubleshooter. Still seeing position errors but sometimes it’s a negative number, sometimes timeout, sometimes undefined. Always same “wafer camera failed” popup message
The fact it moves sometimes makes us think the motor might be ok, but now its so all over we aren’t sure. BESI says CAN board or sensor but without being able to troubleshoot it’s a real long time for CAN board lead time…
Best regards,
Noah Ekstrom
Noah C. Ekstrom
Lab Team Manager
Henkel Corporation
14000 Jamboree Road
Irvine, CA 92606 USA
Mobile: +1 (949) 241-5407
E-mail: noah.c.ekstrom@henkel.com
Webpages: Adhesives for Electronics Assembly & Manufacture - Henkel Adhesives
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, September 8, 2026 11:01 AM
To: Noah C Ekstrom <noah.c.ekstrom@henkel.com>
Cc: Chris Berger (Ext@turnpack.com) <info@turnpack.com>; David Grimes <david.grimes@henkel.com>
Subject: [EXT] Re: Equipment HelpCAUTION: This message is from an EXTERNAL SENDER – Please do not open links or attachments unless you recognize the source of this email and know the content is safe!
HI Noah,
I am at a customer today but I'll try to call you. In the meantime can you give me some more info on the error and the behavior?
Chris
On Tue, Sep 8, 2026 at 10:54 AM Noah C Ekstrom <noah.c.ekstrom@henkel.com> wrote:
Hi Chris,
This is Noah Ekstrom at Henkel. We're having some issues with our Datacon (you've helped with it in the past) and could use any urgent troubleshooting support you could provide.
We're getting a wafer camera error and need to figure out if it's a motor, sensor, or easy fix.
Please reach out via email or phone (9492415407)
Noah Ekstrom
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
by David Grimes - 06:21 - 8 Sep 2026-
Re: [EXT] Re: Equipment Help
Thanks for the info guys.When you try to home the machine does the wafer camera move up at all?ChrisOn Tue, Sep 8, 2026 at 3:17 PM David Grimes <david.grimes@henkel.com> wrote:Hi Guys,
I’ll just pop in to say that the current error (different than the previous error when the camera was stuck all the way up) indicates that the trouble initializing the camera is “mechanical”.
Best,
David
From: Noah C Ekstrom <noah.c.ekstrom@henkel.com>
Sent: Tuesday, September 8, 2026 11:18 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Chris Berger (Ext@turnpack.com) <info@turnpack.com>; David Grimes <david.grimes@henkel.com>
Subject: RE: [EXT] Re: Equipment HelpThank you!
First instance was a user trying to auto focus the wafer during teaching on Wednesday. The camera went up and didn’t stop till it reached limit. Error message that kept popping up was “Initialization of wafer camera failed”. In the log it was showing SmEsLiftSys and SmWcFocusSys get position errors and no origin defined. It enters e-stop after the initialization fails.
Ultimately, David was able to pull down a bit on the camera unit and then it rehomed. That was on Friday, but nobody used the tool to try actual operation (just homed it a few times).
Today someone tried to use the machine and it homed, did pickup and seemed fine, but during first build it also spit out the initialization failure. We have tried moving the unit and it doesn’t want to home consistently. Sometimes it homes once but usually it fails. The camera focus doesn’t jog consistently in the troubleshooter. Still seeing position errors but sometimes it’s a negative number, sometimes timeout, sometimes undefined. Always same “wafer camera failed” popup message
The fact it moves sometimes makes us think the motor might be ok, but now its so all over we aren’t sure. BESI says CAN board or sensor but without being able to troubleshoot it’s a real long time for CAN board lead time…
Best regards,
Noah Ekstrom
Noah C. Ekstrom
Lab Team Manager
Henkel Corporation
Mobile: +1 (949) 241-5407
E-mail: noah.c.ekstrom@henkel.com
Webpages: Adhesives for Electronics Assembly & Manufacture - Henkel Adhesives
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, September 8, 2026 11:01 AM
To: Noah C Ekstrom <noah.c.ekstrom@henkel.com>
Cc: Chris Berger (Ext@turnpack.com) <info@turnpack.com>; David Grimes <david.grimes@henkel.com>
Subject: [EXT] Re: Equipment HelpCAUTION: This message is from an EXTERNAL SENDER – Please do not open links or attachments unless you recognize the source of this email and know the content is safe!
HI Noah,
I am at a customer today but I'll try to call you. In the meantime can you give me some more info on the error and the behavior?
Chris
On Tue, Sep 8, 2026 at 10:54 AM Noah C Ekstrom <noah.c.ekstrom@henkel.com> wrote:
Hi Chris,
This is Noah Ekstrom at Henkel. We're having some issues with our Datacon (you've helped with it in the past) and could use any urgent troubleshooting support you could provide.
We're getting a wafer camera error and need to figure out if it's a motor, sensor, or easy fix.
Please reach out via email or phone (9492415407)
Noah Ekstrom
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--Christopher Berger
by Chris Berger - 06:26 - 8 Sep 2026-
Re: [EXT] Re: Equipment Help
Currently, yes if I push it manually to the bottom it will move up and around 1cm and then stop.
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, 08 September 2026 15:22:19
To: David Grimes <david.grimes@henkel.com>
Cc: Noah C Ekstrom <noah.c.ekstrom@henkel.com>; Chris Berger (Ext@turnpack.com) <info@turnpack.com>
Subject: Re: [EXT] Re: Equipment HelpCAUTION: This message is from an EXTERNAL SENDER – Please do not open links or attachments unless you recognize the source of this email and know the content is safe!
Thanks for the info guys.
When you try to home the machine does the wafer camera move up at all?
Chris
On Tue, Sep 8, 2026 at 3:17 PM David Grimes <david.grimes@henkel.com> wrote:
Hi Guys,
I’ll just pop in to say that the current error (different than the previous error when the camera was stuck all the way up) indicates that the trouble initializing the camera is “mechanical”.
Best,
David
From: Noah C Ekstrom <noah.c.ekstrom@henkel.com>
Sent: Tuesday, September 8, 2026 11:18 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Chris Berger (Ext@turnpack.com) <info@turnpack.com>; David Grimes <david.grimes@henkel.com>
Subject: RE: [EXT] Re: Equipment HelpThank you!
First instance was a user trying to auto focus the wafer during teaching on Wednesday. The camera went up and didn’t stop till it reached limit. Error message that kept popping up was “Initialization of wafer camera failed”. In the log it was showing SmEsLiftSys and SmWcFocusSys get position errors and no origin defined. It enters e-stop after the initialization fails.
Ultimately, David was able to pull down a bit on the camera unit and then it rehomed. That was on Friday, but nobody used the tool to try actual operation (just homed it a few times).
Today someone tried to use the machine and it homed, did pickup and seemed fine, but during first build it also spit out the initialization failure. We have tried moving the unit and it doesn’t want to home consistently. Sometimes it homes once but usually it fails. The camera focus doesn’t jog consistently in the troubleshooter. Still seeing position errors but sometimes it’s a negative number, sometimes timeout, sometimes undefined. Always same “wafer camera failed” popup message
The fact it moves sometimes makes us think the motor might be ok, but now its so all over we aren’t sure. BESI says CAN board or sensor but without being able to troubleshoot it’s a real long time for CAN board lead time…
Best regards,
Noah Ekstrom
Noah C. Ekstrom
Lab Team Manager
Henkel Corporation
Mobile: +1 (949) 241-5407
E-mail: noah.c.ekstrom@henkel.com
Webpages: Adhesives for Electronics Assembly & Manufacture - Henkel Adhesives
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, September 8, 2026 11:01 AM
To: Noah C Ekstrom <noah.c.ekstrom@henkel.com>
Cc: Chris Berger (Ext@turnpack.com) <info@turnpack.com>; David Grimes <david.grimes@henkel.com>
Subject: [EXT] Re: Equipment HelpCAUTION: This message is from an EXTERNAL SENDER – Please do not open links or attachments unless you recognize the source of this email and know the content is safe!
HI Noah,
I am at a customer today but I'll try to call you. In the meantime can you give me some more info on the error and the behavior?
Chris
On Tue, Sep 8, 2026 at 10:54 AM Noah C Ekstrom <noah.c.ekstrom@henkel.com> wrote:
Hi Chris,
This is Noah Ekstrom at Henkel. We're having some issues with our Datacon (you've helped with it in the past) and could use any urgent troubleshooting support you could provide.
We're getting a wafer camera error and need to figure out if it's a motor, sensor, or easy fix.
Please reach out via email or phone (9492415407)
Noah Ekstrom
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
by "Noah C Ekstrom" <noah.c.ekstrom@henkel.com> - 06:41 - 8 Sep 2026-
RE: [EXT] Re: Equipment Help
Hi Chris,
In case it’s any help here is the current error:
Best,
David
From: Noah C Ekstrom <noah.c.ekstrom@henkel.com>
Sent: Tuesday, September 8, 2026 3:41 PM
To: Christopher Berger <cberger@turnpack.com>; David Grimes <david.grimes@henkel.com>
Cc: Chris Berger (Ext@turnpack.com) <info@turnpack.com>
Subject: Re: [EXT] Re: Equipment HelpCurrently, yes if I push it manually to the bottom it will move up and around 1cm and then stop.
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, 08 September 2026 15:22:19
To: David Grimes <david.grimes@henkel.com>
Cc: Noah C Ekstrom <noah.c.ekstrom@henkel.com>; Chris Berger (Ext@turnpack.com) <info@turnpack.com>
Subject: Re: [EXT] Re: Equipment HelpCAUTION: This message is from an EXTERNAL SENDER – Please do not open links or attachments unless you recognize the source of this email and know the content is safe!
Thanks for the info guys.
When you try to home the machine does the wafer camera move up at all?
Chris
On Tue, Sep 8, 2026 at 3:17 PM David Grimes <david.grimes@henkel.com> wrote:
Hi Guys,
I’ll just pop in to say that the current error (different than the previous error when the camera was stuck all the way up) indicates that the trouble initializing the camera is “mechanical”.
Best,
David
From: Noah C Ekstrom <noah.c.ekstrom@henkel.com>
Sent: Tuesday, September 8, 2026 11:18 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Chris Berger (Ext@turnpack.com) <info@turnpack.com>; David Grimes <david.grimes@henkel.com>
Subject: RE: [EXT] Re: Equipment HelpThank you!
First instance was a user trying to auto focus the wafer during teaching on Wednesday. The camera went up and didn’t stop till it reached limit. Error message that kept popping up was “Initialization of wafer camera failed”. In the log it was showing SmEsLiftSys and SmWcFocusSys get position errors and no origin defined. It enters e-stop after the initialization fails.
Ultimately, David was able to pull down a bit on the camera unit and then it rehomed. That was on Friday, but nobody used the tool to try actual operation (just homed it a few times).
Today someone tried to use the machine and it homed, did pickup and seemed fine, but during first build it also spit out the initialization failure. We have tried moving the unit and it doesn’t want to home consistently. Sometimes it homes once but usually it fails. The camera focus doesn’t jog consistently in the troubleshooter. Still seeing position errors but sometimes it’s a negative number, sometimes timeout, sometimes undefined. Always same “wafer camera failed” popup message
The fact it moves sometimes makes us think the motor might be ok, but now its so all over we aren’t sure. BESI says CAN board or sensor but without being able to troubleshoot it’s a real long time for CAN board lead time…
Best regards,
Noah Ekstrom
Noah C. Ekstrom
Lab Team Manager
Henkel Corporation
Mobile: +1 (949) 241-5407
E-mail: noah.c.ekstrom@henkel.com
Webpages: Adhesives for Electronics Assembly & Manufacture - Henkel Adhesives
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, September 8, 2026 11:01 AM
To: Noah C Ekstrom <noah.c.ekstrom@henkel.com>
Cc: Chris Berger (Ext@turnpack.com) <info@turnpack.com>; David Grimes <david.grimes@henkel.com>
Subject: [EXT] Re: Equipment HelpCAUTION: This message is from an EXTERNAL SENDER – Please do not open links or attachments unless you recognize the source of this email and know the content is safe!
HI Noah,
I am at a customer today but I'll try to call you. In the meantime can you give me some more info on the error and the behavior?
Chris
On Tue, Sep 8, 2026 at 10:54 AM Noah C Ekstrom <noah.c.ekstrom@henkel.com> wrote:
Hi Chris,
This is Noah Ekstrom at Henkel. We're having some issues with our Datacon (you've helped with it in the past) and could use any urgent troubleshooting support you could provide.
We're getting a wafer camera error and need to figure out if it's a motor, sensor, or easy fix.
Please reach out via email or phone (9492415407)
Noah Ekstrom
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
by David Grimes - 05:37 - 9 Sep 2026 -
Re: [EXT] Re: Equipment Help
Noah,Sounds like wafer camera home sensor issue. Did you already check the sensor in the standard trainer?ChrisChristopher BergerOn Tue, Sep 8, 2026, 3:51 PM Noah C Ekstrom <info@turnpack.com> wrote:Currently, yes if I push it manually to the bottom it will move up and around 1cm and then stop.
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, 08 September 2026 15:22:19
To: David Grimes <david.grimes@henkel.com>
Cc: Noah C Ekstrom <noah.c.ekstrom@henkel.com>; Chris Berger (Ext@turnpack.com) <info@turnpack.com>
Subject: Re: [EXT] Re: Equipment HelpCAUTION: This message is from an EXTERNAL SENDER – Please do not open links or attachments unless you recognize the source of this email and know the content is safe!
Thanks for the info guys.
When you try to home the machine does the wafer camera move up at all?
Chris
On Tue, Sep 8, 2026 at 3:17 PM David Grimes <david.grimes@henkel.com> wrote:
Hi Guys,
I’ll just pop in to say that the current error (different than the previous error when the camera was stuck all the way up) indicates that the trouble initializing the camera is “mechanical”.
Best,
David
From: Noah C Ekstrom <noah.c.ekstrom@henkel.com>
Sent: Tuesday, September 8, 2026 11:18 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Chris Berger (Ext@turnpack.com) <info@turnpack.com>; David Grimes <david.grimes@henkel.com>
Subject: RE: [EXT] Re: Equipment HelpThank you!
First instance was a user trying to auto focus the wafer during teaching on Wednesday. The camera went up and didn’t stop till it reached limit. Error message that kept popping up was “Initialization of wafer camera failed”. In the log it was showing SmEsLiftSys and SmWcFocusSys get position errors and no origin defined. It enters e-stop after the initialization fails.
Ultimately, David was able to pull down a bit on the camera unit and then it rehomed. That was on Friday, but nobody used the tool to try actual operation (just homed it a few times).
Today someone tried to use the machine and it homed, did pickup and seemed fine, but during first build it also spit out the initialization failure. We have tried moving the unit and it doesn’t want to home consistently. Sometimes it homes once but usually it fails. The camera focus doesn’t jog consistently in the troubleshooter. Still seeing position errors but sometimes it’s a negative number, sometimes timeout, sometimes undefined. Always same “wafer camera failed” popup message
The fact it moves sometimes makes us think the motor might be ok, but now its so all over we aren’t sure. BESI says CAN board or sensor but without being able to troubleshoot it’s a real long time for CAN board lead time…
Best regards,
Noah Ekstrom
Noah C. Ekstrom
Lab Team Manager
Henkel Corporation
Mobile: +1 (949) 241-5407
E-mail: noah.c.ekstrom@henkel.com
Webpages: Adhesives for Electronics Assembly & Manufacture - Henkel Adhesives
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, September 8, 2026 11:01 AM
To: Noah C Ekstrom <noah.c.ekstrom@henkel.com>
Cc: Chris Berger (Ext@turnpack.com) <info@turnpack.com>; David Grimes <david.grimes@henkel.com>
Subject: [EXT] Re: Equipment HelpCAUTION: This message is from an EXTERNAL SENDER – Please do not open links or attachments unless you recognize the source of this email and know the content is safe!
HI Noah,
I am at a customer today but I'll try to call you. In the meantime can you give me some more info on the error and the behavior?
Chris
On Tue, Sep 8, 2026 at 10:54 AM Noah C Ekstrom <noah.c.ekstrom@henkel.com> wrote:
Hi Chris,
This is Noah Ekstrom at Henkel. We're having some issues with our Datacon (you've helped with it in the past) and could use any urgent troubleshooting support you could provide.
We're getting a wafer camera error and need to figure out if it's a motor, sensor, or easy fix.
Please reach out via email or phone (9492415407)
Noah Ekstrom
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
by Chris Berger - 03:47 - 9 Sep 2026
-
-
-
-
-
-
Apple Statement Request: AAPLGS62000804729L
Accounts Receivable,
Apple is requesting a current Accounts Receivable statement (aging report) from TURNKEY PACKAGING SOLUTIONS LLC for all Apple accounts globally. Apple does not hold your customer account number on file and appreciates a full reporting of all accounts you have on file for Apple.
If you are receiving more than one request, Apple has you under multiple supplier names/accounts.
A complete Accounts Receivable statement(s) should include anything open on the account that hasn’t been cleared. This would include any credits, unapplied payments, as well as invoices. You can run the report as of today. No template will be provided (Excel file format preferred).
Please reply to this email with Statement(s) with reference AAPLGS62000804729L to help us correctly account for your response.If you have additional questions you may contact clansinger@apple.com.
Thank you for your cooperation with our ongoing/routine review. Please continue to work with your normal AP process for invoicing, approvals, and payments.Dennis Nkrumah
by apreview@apple.apexanalytix.com - 11:42 - 8 Sep 2026 -
Deck Out Builds: 10% Off Select Composites
View as a web page 
Building Materials Electrical Paint Plumbing Tools Bulk
QUICK LINKS Mobile App Pro Local Ad Pro Pick™ Product Videos INFORMATION Privacy & Security Contact Us Store Finder This email was sent to info@turnpack.com.
Except as noted, prices valid through 09/15/2026. Pricing and availability may vary by store.
To unsubscribe from future emails, click here.
For licenses, see homedepot.com/licensenumbers.
NOTE: All offers may not be available in all areas. Prices are in U.S. dollars and are subject to change without notice.
2455 Paces Ferry Road, N.W., Atlanta, GA 30339-4024, USA.
©2026 Home Depot Product Authority, LLC. All rights reserved.
by "Home Depot Pro Xtra" <homedepotpro@mg.homedepot.com> - 11:31 - 8 Sep 2026 -
Add Payroll that connects to your books
Intuit
Get payroll that connects straight to your books Your payroll, HR, and business tools work together in QuickBooks Workforce and stay in sync with your books—so you get the full financial picture of your business. Get QuickBooks Workforce 
Workforce keeps your team paid and connected in one place 
Payroll on time, every time Set up Auto Payroll once and you’re done.** We’ll calculate and pay your payroll taxes for you—accurate tax calculations guaranteed.† 
Make every hour count Time-off balances are tracked automatically against your time-off policies, and the hours sync directly to payroll.** 
Make informed decisions on your team Get a clear view of your team with real-time reports at your fingertips. From labor costs to time off balances, get the insights you need to make the right decisions. One platform for your whole team QuickBooks Workforce brings payroll, HR, time tracking, and accounting together—so you can manage your team without switching tools. Get Workforce View on web ELM ID: 10680-001a Money movement services are provided by Intuit Payments Inc., licensed as a Money Transmitter by the New York State Department of Financial Services. For more information about Intuit Payments' money transmission licenses, please visit https://www.intuit.com/legal/licenses/payment-licenses/.
†Guarantees
Payroll Tax Accuracy Guarantee: As long as the information you provide us is correct and on time, and you have sufficient funds in your account, we’ll calculate your payroll taxes, file your tax forms and make tax payments directly from your account accurately and on time, or we’ll pay the resulting federal or state payroll tax penalties and interest. You are responsible for paying any additional tax liability you may owe. Additional terms apply. See QuickBooks Terms of Service.
Time off management: Available in QuickBooks Workforce Premium and Elite only.
Tax penalty protection: Only QuickBooks Workforce Elite users who have completed expert review of their payroll tax setup and enrolled in e-services for automated tax payments and filings are eligible to receive the tax penalty protection. If you receive a tax notice for payroll taxes paid and filed by QuickBooks on behalf of your company, and send it to us within 15 days of the tax notice, we will help you resolve it with the applicable tax agency and cover the payroll tax penalty and interest, up to $25,000 per year. You are responsible for paying any additional tax liability you may owe. Additional terms apply. Learn more about tax penalty protection.
**Features
QuickBooks Workforce features and functionality vary by plan, which are subject to change. Certain features are available only with Workforce Premium or Elite, or may require additional fees. For details, see quickbooks.com/workforce.
Auto payroll: Available after first successful payroll run for salaried employees or hourly employees on default hours.
Automated tax payments and filings: Requires completion of tax setup. Available for state and federal taxes. Certain local taxes available in QuickBooks Workforce Premium and Elite only.This message was sent to info@turnpack.com, as an Intuit customer, consistent with your email preferences. If you have chosen not to receive marketing messages, you will continue to receive business communications about your selected Intuit product(s), which may either affect your service or software, your account, or which may be legally required. Unsubscribe | Security | Privacy statement © 2026 Intuit Inc., Trademarks.
2800 E. Commerce Center Place, Tucson, AZ 85706
by "Intuit QuickBooks" <Intuit@mkt.intuit.com> - 10:47 - 8 Sep 2026 -
Return Received
MY ACCOUNT Return Received for RMA
#We have received the item(s) you returned and will be
processing any remaining balance as appropriate.
Please allow 3-5 business days for a refund
confirmation. Thank you for shopping at DwyerOmega.
VIEW RETURN STATUS Have questions? Contact us. NIST traceable calibration for
measurement and control
productsRobust resources and
educational videosSign up to receive value-added
content, technology explained,
new products, and promotions
by "DwyerOmega Customer Service" <omegaservicecenter@dwyeromega.com> - 09:37 - 8 Sep 2026 -
Your shipment was delivered 876651708026
FedEx
Your shipment was delivered. Delivery Date Tue, 09/08/2026
9:11am
Get alerts on future deliveries Stay informed with delivery notifications for all your shipments. You can also share delivery instructions and manage your delivery. 
SIGN UP Delivered to 55 HIGH STSTE 7, Billerica, MA 01862 Received by K.Kevin Report missing package How was your delivery? 
Personal message return nozzles for repair; over tolerance and white film on the insides of the nozzle stock Tracking details Tracking ID 876651708026 From Turnpack LLC
christopher berger
6922 East Via Northgate
Suite 101
Mesa, AZ, US
85212To Omni Glass Inc.
55 High Street
Billerica, MA, US
01862Ship date Thu 9/03/2026 12:44 PM Number of pieces 1 Total shipment weight 1.00 LB Service FedEx 2Day® Reference repair nozzles; per 9/2 email Shipper reference repair nozzles; per 9/2 email TRACK SHIPMENT 
Track your package and see when it's coming With Map View, follow your package's journey and get an estimated delivery time window—so you can plan ahead and avoid missed deliveries. DOWNLOAD THE MOBILE APP This tracking update has been requested by: Company name christopher berger Name Turnpack LLC Email info@turnpack.com
Please do not reply to this message. This email was sent from an unattended mailbox.All weights are estimated.
© 2026 FedEx. All rights reserved.
Scammers can pose as legitimate organizations to seem convincing. We encourage you to stay cautious of unknown messages – delete them and visit the FedEx Fraud & Security page to help keep your information safe.
Thank you for your business.
ID 1026Terms of Use Privacy notice Support Fraud & security
by "FedEx Tracking" <TrackingUpdates@fedex.com> - 09:23 - 8 Sep 2026 -
Power Device Corp Missing Invoices-TURNPACK LLC
Hello,
We are reviewing your account and we believe we are missing invoice related to some shipments from your company. Can you send me any outstanding invoices related to the PO’s mentioned below so we can make sure you are paid timely. Please send at your earliest convenience.
Pur Ccn
Mas Loc
Vendor
VENDOR NAME
Pur Loc
Po Num
Po Line
Gl Acct
Item
Agc
Currency
Receiver
Rec Line
Rec Date
Buy Qty
10
HYP
P62387
TURNPACK LLC
PU01
CEP-00186
0001
AS01120
\HGRS-V Hot Gas Workstation
POLI
US
2001274
0001
8/4/26
1
10
HYP
P62387
TURNPACK LLC
PU01
CEP-00186
0002
AS01120
\Nozzle, Angled
POLI
US
2001274
0002
8/4/26
8
10
HYP
P62387
TURNPACK LLC
PU01
CEP-00186
0009
MC650
\Freight
POLI
US
2001274
0003
8/4/26
1
Thank you
Best Regards,
Meico Macatol
Accounts Payable Team
Power Device Corporation
Notice: This e-mail and any files transmitted with it may contain Data Device Corporation's and its subsidiaries privileged and proprietary information. It is intended solely for the use of the individual or entity to whom it is addressed. If you are not the named recipient of this transmission, any disclosure, copying, distribution or reliance on the contents of this message is prohibited. If you received this e-mail in error, please destroy it and any attached files and notify me immediately.
Click Here to view our privacy statement.
by "Macatol,Meico" <Meico.Macatol@powerdevicecorp.com> - 08:41 - 8 Sep 2026 -
-
We have your shipment 876847269830.
FedEx
We have your shipment. Scheduled delivery date Will be updated soon
Take more control of your shipments 
Request to hold shipment at a FedEx location Hold for pickup MANAGE DELIVERY Some delivery options might not be available on the day of delivery. Tracking details Tracking ID 876847269830 From HANNAH
MOFLON TECHNOLOGY CO.,LIMITED
1F,2F,3F,NO.6BLDG,INDUSTRIAL AREA D
BUYONG COMMUNITY,BAOAN DISTRICT,
ShenZhen 518104,China
SHENZHENCN
518104To CHRIS BERGER
TURNPACK LLC
6922 E VIA NORTHGATE SUITE 101,
MESA, AZ 85212,UNITED STATES
MESA, AZ, US
85212Ship date Tue 9/08/2026 05:47 PM Number of pieces 1 Total shipment weight 0.50 KG Service FedEx International Priority® TRACK SHIPMENT 
Combine your shopping and shipping Out and about? Drop off or pick up your packages at nearby retail locations, including FedEx Office, Walgreens, Dollar General, and many more. Some are even open 24 hours. FIND LOCATIONS
Please do not reply to this message. This email was sent from an unattended mailbox.All weights are estimated.
© 2026 FedEx. All rights reserved.
Scammers can pose as legitimate organizations to seem convincing. We encourage you to stay cautious of unknown messages – delete them and visit the FedEx Fraud & Security page to help keep your information safe.
Thank you for your business.
ID 1029Terms of Use Privacy notice Support Fraud & security
by "FedEx Tracking" <TrackingUpdates@fedex.com> - 06:21 - 8 Sep 2026 -
You're getting a shipment 876847269830
FedEx
You’re getting a shipment. Tracking details Tracking ID 876847269830 From MOFLON TECHNOLOGY CO.,LIMITED
1F,2F,3F,NO.6BLDG,INDUSTRIAL AREA D
BUYONG COMMUNITY,BAOAN DISTRICT,
ShenZhen 518104,China
SHENZHENCN
518104To CHRIS BERGER
TURNPACK LLC
6922 E VIA NORTHGATE SUITE 101,
MESA, AZ 85212,UNITED STATES
MESA, AZ, US
85212Ship date Tue 9/08/2026 05:47 PM Number of pieces 1 Total shipment weight 0.50 KG Service FedEx International Priority® TRACK SHIPMENT
Combine your shopping and shipping Out and about? Drop off or pick up your packages at nearby retail locations, including FedEx Office, Walgreens, Dollar General, and many more. Some are even open 24 hours. FIND LOCATIONS
Please do not reply to this message. This email was sent from an unattended mailbox.All weights are estimated.
© 2026 FedEx. All rights reserved.
Scammers can pose as legitimate organizations to seem convincing. We encourage you to stay cautious of unknown messages – delete them and visit the FedEx Fraud & Security page to help keep your information safe.
Thank you for your business.
ID 1030Terms of Use Privacy notice Support Fraud & security
by "FedEx Tracking" <TrackingUpdates@fedex.com> - 06:21 - 8 Sep 2026 -
Shipped: "GAOHOU 6PCS Ronis 455 Lift..."
Your package was shipped!
OrderedShipped
Out for deliveryDeliveredArriving tomorrowTurnpack - MESA, AZ - On behalf of TurnpackOrder # 114-3500853-6595415
Quantity: 1$699Total $6.64 
View related transactions in Your Transactions. A delivery driver may contact you on the day of delivery. For everyone’s safety, ensure a clear, well-lit path and secure pets before arrival. ©2026 Amazon.com, Inc. or its affiliates. Amazon and all related marks are trademarks of Amazon.com, Inc. or its affiliates, Amazon.com, Inc. 410 Terry Avenue N., Seattle, WA 98109.Your invoice can be accessed here.
One or more items in your shipment was supplied by a different seller than the seller you purchased the item from. Visit Your Orders from a web browser to see the suppliers of these items on your invoices.
Unless otherwise noted, items sold by Amazon are subject to sales tax in selected states or provinces in accordance with the applicable laws of that state. If your order contains one or more items from a seller other than Amazon, it may be subject to local and state or province tax, depending upon the sellers business policies and the location of their operations. For more information, go to tax and seller information.
by "Amazon.com" <shipment-tracking@amazon.com> - 02:56 - 8 Sep 2026 -
Fwd: Your Microsoft order #8745921435 has been processed
---------- Forwarded message ---------
From: Microsoft <microsoft-noreply@microsoft.com>
Date: Mon, Sep 7, 2026 at 12:58 PM
Subject: Your Microsoft order #8745921435 has been processed
To: <christopherberger@live.com>
Thank you for shopping with us on September 7, 2026
Any downloads you bought, except preorders, are available now.
Order Number: 8745921435 Date purchased: September 7, 2026 Order details
Item description Quantity Price Windows 11 Pro (Download)
Product Key: NRV8H-WTPBQ-MY98K-3Q38D-9D726
1 USD 199.99 Order Subtotal USD 199.99 Taxes USD 16.60 Order Total USD 216.59 Payment
American Express **1004 USD 216.59 View or manage your order > Shop Microsoft Store deals and get the best price with price protection for 60 days from delivery date.*
*Exclusions apply, including ASUS ROG Xbox Ally and Ally X. See Price Protection terms for details.
Dates are displayed per Coordinated Universal Time. Order date may vary based on your location.
Microsoft Corporation, One Microsoft Way, Redmond, WA 98052
by Chris Live.com Test - 11:02 - 7 Sep 2026 -
You're getting a shipment 876847269830
FedEx
You’re getting a shipment. Tracking details Tracking ID 876847269830 From MOFLON TECHNOLOGY CO.,LIMITED
1F,2F,3F,NO.6bldg,industrial Area D
Buyong community,Baoan District,
ShenZhen 518104,China
SHENZHENCN
518104To Chris Berger
Turnpack LLC
6922 E Via Northgate Suite 101,
Mesa, AZ 85212,United States
MESA, AZ, US
85212Number of pieces 1 Total shipment weight 0.10 KG Service FedEx International Priority® TRACK SHIPMENT
Combine your shopping and shipping Out and about? Drop off or pick up your packages at nearby retail locations, including FedEx Office, Walgreens, Dollar General, and many more. Some are even open 24 hours. FIND LOCATIONS
Please do not reply to this message. This email was sent from an unattended mailbox.All weights are estimated.
© 2026 FedEx. All rights reserved.
Scammers can pose as legitimate organizations to seem convincing. We encourage you to stay cautious of unknown messages – delete them and visit the FedEx Fraud & Security page to help keep your information safe.
Thank you for your business.
ID 1030Terms of Use Privacy notice Support Fraud & security
by "FedEx Tracking" <TrackingUpdates@fedex.com> - 09:47 - 7 Sep 2026 -
Your on-call pickup is scheduled SYMA3166
FedEx
Your on-call pickup is scheduled. Scheduled pickup Tuesday, September 8, 2026
Between 6:00 pm and 8:00 pm
Pickup management If you scheduled your pickup online and have an account, you can log in to make changes. If you scheduled over the phone or don’t have an account, you can contact us at 1.800.463.3339.
LOGIN Preparing for pickup Now that your pickup is scheduled, let’s make sure you have everything ready when the driver arrives. - Ensure that all your packages are properly packed and labeled.
- Ensure that all the packages are in an easily accessible location and follow your pickup instructions, if provided.
- Make sure that your packages are ready by the start of your pickup window.
- If you no longer need your pickup in the U.S., make sure to cancel it before the driver arrives at your address to avoid incurring pickup charges.
- Need help? Contact 1.800.463.3339 for support.
Pickup details Confirmation number SYMA3166 Address 1F,2F,3F,NO.6bldg,industrial Area D Buyong community,Baoan District, ShenZhen 518104,China SHENZHEN
Scheduled pickup date Tuesday, September 8, 2026 Scheduled pickup window Between 6:00 pm and 8:00 pm Number of packages 1 
Streamlined Pickup Pricing for U.S. Beginning August 18, 2025, on-call parcel pickups in the U.S. will incur a per-stop fee, regardless of package count collected (including zero packages) or FedEx service offering used. Restrictions apply based on payor location. LEARN MORE 
This email has been sent to info@turnpack.com.© 2026 FedEx. The content of this message is protected by copyright and trademark laws under U.S. and international law. Review our privacy policy. All rights reserved.
ID 5201
by "FedEx pickup confirmation" <noreply@fedex.com> - 09:26 - 7 Sep 2026 -
Your on-call pickup is scheduled SYMA3166
FedEx
Your on-call pickup is scheduled. Scheduled pickup Tuesday, September 8, 2026
Between 6:00 pm and 8:00 pm
Pickup management If you scheduled your pickup online and have an account, you can log in to make changes. If you scheduled over the phone or don’t have an account, you can contact us at 1.800.463.3339.
LOGIN Preparing for pickup Now that your pickup is scheduled, let’s make sure you have everything ready when the driver arrives. - Ensure that all your packages are properly packed and labeled.
- Ensure that all the packages are in an easily accessible location and follow your pickup instructions, if provided.
- Make sure that your packages are ready by the start of your pickup window.
- If you no longer need your pickup in the U.S., make sure to cancel it before the driver arrives at your address to avoid incurring pickup charges.
- Need help? Contact 1.800.463.3339 for support.
Pickup details Confirmation number SYMA3166 Address 1F,2F,3F,NO.6bldg,industrial Area D Buyong community,Baoan District, ShenZhen 518104,China SHENZHEN
Scheduled pickup date Tuesday, September 8, 2026 Scheduled pickup window Between 6:00 pm and 8:00 pm Number of packages 1
Streamlined Pickup Pricing for U.S. Beginning August 18, 2025, on-call parcel pickups in the U.S. will incur a per-stop fee, regardless of package count collected (including zero packages) or FedEx service offering used. Restrictions apply based on payor location. LEARN MORE
This email has been sent to info@turnpack.com.© 2026 FedEx. The content of this message is protected by copyright and trademark laws under U.S. and international law. Review our privacy policy. All rights reserved.
ID 5201
by "FedEx pickup confirmation" <noreply@fedex.com> - 09:26 - 7 Sep 2026 -
Second Chance Picks + Trending Items for You, Friend
🧠 We Picked These Just for You FriendFresh picks based on your past bids and browsing.Jump back in there → Log In to My Account 
Auction My Account Help Desk 
ITEMS WON 0 SAVINGS VS RETAIL $ AVERAGE % OFF 0% 
No-Hassle Returns:
If it’s not right, return it within 7 days for a full refund.
No penalties, no stress.Need help? Visit our Help Desk anytime. 
Auction My Account Help Desk Watn to change how you receive these emails? You can Update Your Preferences or Unsubscribe © Copyright 2025 nellisauction.com. All Rights Reserved. 
by "Nellis Auction" <nelli@nellisauction.com> - 07:26 - 7 Sep 2026 -
Ordered: "GAOHOU 6PCS Ronis 455 Lift..."
Thanks for your order!OrderedShippedOut for deliveryDeliveredArriving tomorrowTurnpack - MESA, AZ - On behalf of TurnpackOrder # 114-3500853-6595415PO number Ronis 455 keyQuantity: 1$699Grand Total: $6.64 ©2026 Amazon.com, Inc. or its affiliates. Amazon and all related marks are trademarks of Amazon.com, Inc. or its affiliates, Amazon.com, Inc. 410 Terry Avenue N., Seattle, WA 98109.The payment for your invoice is processed by Amazon Payments, Inc. P.O. Box 81226 Seattle, Washington 98108-1226. If you need more information, please contact (866) 216-1075
By placing your order, you agree to Amazon.com’s Privacy Notice and Conditions of Use. Unless otherwise noted, items sold by Amazon.com are subject to sales tax in select states in accordance with the applicable laws of that state. If your order contains one or more items from a seller other than Amazon.com, it may be subject to state and local sales tax, depending upon the seller's business policies and the location of their operations. Learn more about tax and seller information.
by "Amazon.com" <auto-confirm@amazon.com> - 01:31 - 7 Sep 2026
![LPG - WELLBOX®[S] - Face & Body Sculpting Device - Age-defying, Toning & Cellulite Reduction Action - 100% Non-invasive Cellular Stimulation Method - SPS+ Technology - Made in France - White](https://m.media-amazon.com/images/I/51zlNSXsJBL.jpg)
