Archives
Info Inbox
info@turnpack.com
-
Invoice for Your Order PO26281839
InvoiceBilled toTURNPACK LLC
22425 S SCOTLAND CT STE 104
QUEEN CREEK AZ 85142Purchase Order PO26281839 Total $166.56 Invoice 68438156 Invoice Date 7/15/26 Payment Terms 2% 10, Net 30 Deduct $3.06 on merchandise if paid by 7/25/26. Shipped toAttention: Ste 102 LobbyTurnpack LLC
6922 E Via Northgate Ste 102
Mesa AZ 85212Mail Payment to McMaster-Carr
PO Box 7690
Chicago IL 60680-7690Your Account 438808000 Christopher Berger placed this order.Line Product Ordered Shipped Balance Price Total 1 5537T959 T-Slotted Framing, Silver Surface Bracket for 80 mm High Rail, 6-1/8" Long 4 Each4 0 18.95 Each75.80 2 5537T937 T-Slotted Framing, Silver Corner Bracket for 40 mm High Rail, 1-5/8" Long 2 Each2 0 6.93 Each13.86 3 92095A284 18-8 Stainless Steel Button Head Hex-Drive Screw, M8 x 1.25 mm Thread Size, 20 mm Long, Packs of 25 1 Pack1 0 17.94 Per Pack17.94 4 6000N316 T-Slotted Framing Fasteners, Ball Nut and M8 Screw, 1.5" and 40mm Rail, Stainless Steel, Packs of 4 1 Pack1 0 8.18 Per Pack8.18 5 5508N13 T-Slotted Framing Fasteners, Drop-in Spring Tab Nut, for 1.5" and 40mm High Rail, M4, Packs of 4 6 Packs6 0 3.46 Per Pack20.76 6 8005N15 T-Slotted Framing, Cable Tie Holder, for 1.5" and 40 mm High Single Rail 4 Each4 0 1.37 Each5.48 7 3726N638 Corrosion-Resistant Stacked Wave Disc Spring, Flat Ends, for 19mm Shaft Diameter, 2.06mm Compressed Height 1 Each1 0 7.05 Each7.05 8 93475A230 18-8 Stainless Steel General Purpose Washer for M4 Screw Size, 4.3 mm ID, 9.0 mm OD, Packs of 100 1 Pack1 0 3.93 Per Pack3.93 Merchandise 153.00 Shipping 13.56 Total $166.56 Packing List Shipped Weight Carrier Tracking 2470949-01 07/15/2026 6 lb UPS 1Z9293810103553999 Federal ID 36-1458720
by "McMaster-Carr" <invoice.reply@mcmaster.com> - 02:46 - 16 Jul 2026 -
Credit from Your Order PO26261824
CreditBilled toTURNPACK LLC
22425 S SCOTLAND CT STE 104
QUEEN CREEK AZ 85142Purchase Order PO26261824 Available Credit $(32.97) Credit 68361893 Credit Date 7/15/26 Shipped toAttention: Suite 104Turnpack LLC
22425 S Scotland CT Ste 104
Queen Creek AZ 85142Mailing Address McMaster-Carr
PO Box 7690
Chicago IL 60680-7690Your Account 438808000 Christopher Berger placed this order.Line Product Ordered Shipped Credited Price Total 1 9600K89 SBR Rubber Grommet for 1" Hole Diameter and 1/16" Material Thickness, Packs of 10 1 Pack1 (1) 16.61 Per Pack(16.61) 5 6000N786 T-Slotted Framing Fasteners, Self-Align Ball Nut and M5 Screw, 1.5" and 40mm Rail, Packs of 4 2 Packs2 (2) 8.18 Per Pack(16.36) NotesThis is a credit for purchase order PO26261824, invoice 67607756, packing list number 1749551-01.Merchandise (32.97) Credit Total $(32.97) Federal ID 36-1458720
by "McMaster-Carr" <invoice.reply@mcmaster.com> - 02:46 - 16 Jul 2026 -
Shipped: 1 Essentials item
Your package was shipped!
OrderedShipped
Out for deliveryDeliveredArriving tomorrowTurnpack - MESA, AZ - On behalf of TurnpackOrder # 114-1955438-98274531 Essentials item
Total $19.68 
View related transactions in Your Transactions. A delivery driver may contact you on the day of delivery. For everyone’s safety, ensure a clear, well-lit path and secure pets before arrival. ©2026 Amazon.com, Inc. or its affiliates. Amazon and all related marks are trademarks of Amazon.com, Inc. or its affiliates, Amazon.com, Inc. 410 Terry Avenue N., Seattle, WA 98109.Your invoice can be accessed here.
Unless otherwise noted, items sold by Amazon are subject to sales tax in selected states or provinces in accordance with the applicable laws of that state. If your order contains one or more items from a seller other than Amazon, it may be subject to local and state or province tax, depending upon the sellers business policies and the location of their operations. For more information, go to tax and seller information.
by "Amazon.com" <shipment-tracking@amazon.com> - 12:52 - 16 Jul 2026 -
RE: Confirmation for Your Order PO26281839
Hi Lorena,
We will update the billing address on your order.
If you need to update your address for future orders, you can do so by following the instructions here.
Candace
From: Turnpack LLC <info@turnpack.com>
Sent: Wednesday, July 15, 2026 9:32 PM
To: 'McMaster-Carr' <la.sales@mcmaster.com>
Subject: RE: Confirmation for Your Order PO26281839
Can you please update the billing address to match delivery address. Except the suite is 101 for billing. We just aren’t fully setup yet so using the suite next door til the end of the month.
Thank you for your time,
Lorena Carrillo
From: McMaster-Carr <la.sales@mcmaster.com>
Sent: Wednesday, July 15, 2026 5:47 PM
To: INFO@TURNPACK.COM
Subject: Confirmation for Your Order PO26281839Thank you for your order. We will deliver your items by 10:30 am tomorrow.
Confirmation
Delivery address
Turnpack LLC
6922 E Via Northgate Ste 102
Mesa AZ 85212
Attention: Ste 102 LobbyBilling address
Turnpack LLC
22425 S Scotland CT Ste 104
Queen Creek AZ 85142Delivery method
UPS GroundOrder date
7/15/2026Payment method
InvoicePlaced by
Christopher BergerMcMaster-Carr number
2470949Delivers Jul 16, by 10:30 am
1
T-Slotted Framing
Silver Surface Bracket for 80 mm High Rail, 6-1/8" Long
5537T9594
each18.95
each$75.80
2
T-Slotted Framing
Silver Corner Bracket for 40 mm High Rail, 1-5/8" Long
5537T9372
each6.93
each$13.86
3
18-8 Stainless Steel Button Head Hex-Drive Screw
M8 x 1.25 mm Thread Size, 20 mm Long
92095A2841
pack of 2517.94
pack$17.94
4
T-Slotted Framing Fasteners
Ball Nut and M8 Screw, 1.5" and 40mm Rail, Stainless Steel
6000N3161
pack of 48.18
pack$8.18
5
T-Slotted Framing Fasteners
Drop-in Spring Tab Nut, for 1.5" and 40mm High Rail, M4
5508N136
packs of 43.46
pack$20.76
6
T-Slotted Framing
Cable Tie Holder, for 1.5" and 40 mm High Single Rail
8005N154
each1.37
each$5.48
7
Corrosion-Resistant Stacked Wave Disc Spring
Flat Ends, for 19mm Shaft Diameter, 2.06mm Compressed Height
3726N6381
each7.05
each$7.05
8
18-8 Stainless Steel General Purpose Washer
for M4 Screw Size, 4.3 mm ID, 9.0 mm OD
93475A2301
pack of 1003.93
pack$3.93
Merchandise
153.00
Shipping
13.56
Total
$166.56
Your order is subject only to our terms and conditions, available at www.mcmaster.com or from our Sales Department.
Phone: (562) 692-5911
Email: la.sales@mcmaster.com
by "McMaster-Carr" <la.sales@mcmaster.com> - 11:22 - 15 Jul 2026 -
You have a new invoice due 08/14/2026
SimpleInvoice
To: Accounts Payable
Here's your invoice. We appreciate your prompt payment.
Thank you for doing business with Watt Solutions!
Best Regards,
Dawna Uchtmann
Sales Representative
Watt Solutions
Thermal Systems … Embracing Complexity
14955 W. Bell Rd #9423
Surprise, AZ 85374
(602) 373-9663
duchtmann@watt.solutions
http://www.watt.solutions/Invoice WATT SOLUTIONS
14955 W. Bell Rd #9423
Surprise, AZ 85374
+16023739663
sales@watt.solutions
http://www.watt.solutions/Bill To:
Accounts Payable
22425 S Scotland Ct.
Suite 104
Queen Creek, AZ 85142
Ship To:
Turnpack, LLC
22425 S Scotland Ct, Suite 104
Queen Creek AZ 85142
United States
PO26261828
Tracking #: 539318109747Shipped: 07/15/2026 via FedEx Priority OvernightInvoice #: 7639
Invoice Date: 07/15/2026
Due Date: 08/14/2026
Terms: Net 30
Amount Due: $69.42Date Activity Quantity Rate Amount 07/15/2026 Watlow 4102-1272 FIREROD 1/4"
1 69.4213 69.42 Tax: $0.00Total: $69.42Amount Due:$69.42
by quickbooks@notification.intuit.com - 08:56 - 15 Jul 2026 -
Confirmation for Your Order PO26281839
Thank you for your order. We will deliver your items by 10:30 am tomorrow.Confirmation
Delivery address
Turnpack LLC
6922 E Via Northgate Ste 102
Mesa AZ 85212
Attention: Ste 102 LobbyBilling address
Turnpack LLC
22425 S Scotland CT Ste 104
Queen Creek AZ 85142Delivery method
UPS GroundOrder date
7/15/2026Payment method
InvoicePlaced by
Christopher BergerMcMaster-Carr number
2470949PO26281839 Delivers Jul 16, by 10:30 am 1 T-Slotted Framing
Silver Surface Bracket for 80 mm High Rail, 6-1/8" Long
5537T9594
each18.95
each$75.80 2 T-Slotted Framing
Silver Corner Bracket for 40 mm High Rail, 1-5/8" Long
5537T9372
each6.93
each$13.86 3 18-8 Stainless Steel Button Head Hex-Drive Screw
M8 x 1.25 mm Thread Size, 20 mm Long
92095A2841
pack of 2517.94
pack$17.94 4 T-Slotted Framing Fasteners
Ball Nut and M8 Screw, 1.5" and 40mm Rail, Stainless Steel
6000N3161
pack of 48.18
pack$8.18 5 T-Slotted Framing Fasteners
Drop-in Spring Tab Nut, for 1.5" and 40mm High Rail, M4
5508N136
packs of 43.46
pack$20.76 6 T-Slotted Framing
Cable Tie Holder, for 1.5" and 40 mm High Single Rail
8005N154
each1.37
each$5.48 7 Corrosion-Resistant Stacked Wave Disc Spring
Flat Ends, for 19mm Shaft Diameter, 2.06mm Compressed Height
3726N6381
each7.05
each$7.05 8 18-8 Stainless Steel General Purpose Washer
for M4 Screw Size, 4.3 mm ID, 9.0 mm OD
93475A2301
pack of 1003.93
pack$3.93 Merchandise 153.00 Shipping 13.56 Total $166.56 Your order is subject only to our terms and conditions, available at www.mcmaster.com or from our Sales Department. Phone: (562) 692-5911 Email: la.sales@mcmaster.com
by "McMaster-Carr" <la.sales@mcmaster.com> - 08:47 - 15 Jul 2026 -
Re: Turnpack, LLC Order (Ref PO26281838)
Confirmed. Thank you
Jake D'Angelo | Inside Sales Manager
480-813-6118
120 E Corporate Place, Suite 12
Chandler, AZ 85225
This message is intended only for the individual or entity to which it is addressed and may contain information that is private and confidential. If you are not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication and its attachments is strictly prohibited. If you have received this communication and its attachments in error, please advise us.
From: Lorena Carrillo <info@turnpack.com>
Sent: Wednesday, July 15, 2026 12:41 PM
To: Jake D'Angelo <jdangelo@portplastics.com>
Subject: Turnpack, LLC Order (Ref PO26281838)[EXTERNAL SENDER]
Dear Mychelle Cherry (Port Plastics)
Please find attached purchase order PO26281838 with reference: Fri, Jul 10, 2026 at 9:01 AM amounting in $ 160.00 from Turnpack, LLC as well as the resale certificate, for your review and action.
The receipt is expected for 07/29/2026, if this date is not achievable, please reply with an available date for reconsideration.
**Please acknowledge the receipt of this order and lead time.
Turnpack — Efficiency Redefined Through Automation
by Jake D'Angelo - 04:22 - 15 Jul 2026 -
Christopher, your June account statement is available.
PayPal
Christopher Berger - Your June account statement is available.
Your June account statement is available.
Hi Christopher Berger,
Access your account statements quickly and easily. Log in to your account and select the monthly statement you’d like to view.
Forgot your email or password? Recover them here.
Get the PayPal app
Track your account activity and find ways to earn rewards.
Please do not reply to this email. We are unable to respond to inquiries sent to this address. For immediate answers to your questions, visit our Help Center by clicking "Help" located on any PayPal page or email.
PayPal, Inc. is Licensed as a Money Transmitter by the New York State Department of Financial Services. PayPal, Inc., NMLS #910457, License #FT3345, Massachusetts Foreign Transmittal License. PayPal, Inc., Transmit Money By Check, Draft or Money Order By The Department of Banking, Commonwealth of Pennsylvania. PayPal, Inc. Rhode Island Licensed Money Transferor. PAYPAL, INC., NMLS #910457, LICENSE #34967, IS LICENSED BY THE GEORGIA DEPARTMENT OF BANKING AND FINANCE. PayPal, Inc. is Licensed by the State of Connecticut Department of Banking to perform Money Transmission, NMLS #910457, License Number MT-910457.
PayPal is committed to your Privacy and the responsible handling of all personal data. To learn more, read our Privacy Statement.
Copyright © 2026 PayPal, Inc. All rights reserved. PayPal is located at 2211 N. First St., San Jose, CA 95131.
f3f094fa-e081-4225-af3b-df06629810e8
by "PayPal" <noreply@service.paypal.com> - 03:46 - 15 Jul 2026 -
Your eBill from LEAF
You have a new invoice/ACH payment advice available. Please see the attached if you receive PDF copies by email or log into your account
at https://myleafnow.com to view invoice/advice history, schedule payment, and more.
Type Date Amount Due Date LEAF Invoice 07-15-2026 $2,347.55 07-20-2026 Thank you,
LEAF
Copyright © 2024 LEAF
by "LFC" <EBILL@myleafnow.com> - 03:37 - 15 Jul 2026 -
USPS.com Multifactor Authentication
Your Multifactor Authentication (MFA) Temporary Passcode
Your one-time passcode: 536541
For security reasons, this code will expire in 10 minutes. If you did not take this action, please contact the USPS ® Help Desk immediately.
Sincerely,
The United States Postal Service
Download USPS Mobile ®
USPS.com | Privacy Policy | Support | FAQs This is an automated email; please do not reply to this message. This message is for the designated recipient only and may contain privileged, proprietary, or otherwise private information. If you have received it in error, please delete. Any other use of the email by you is prohibited.
Copyright © 2026 USPS. All Rights Reserved.
475 L'Enfant Plaza SW, Washington, DC 20260
If you no longer wish to receive these emails, unsubscribe here.
by USPostalService@usps.com - 03:37 - 15 Jul 2026 -
Notice of Upcoming Change
Dear Customer,
We are writing to inform you of an important update about your rented or leased space.
Please see the attached notice.
Sincerely,
RightSpace Storage - 3024 - Queen Creek
by 3024@nsabrands.com - 12:37 - 15 Jul 2026 -
Invoice INV2026070003 for 58111.73 has been approved to pay by Intuitive.
Powered by
Invoice INV2026070003 for 58111.73 has been approved to pay by Intuitive.
Good news,
Your invoice has been approved to pay by your customer, Intuitive.
If your customer subsequently marks the invoice as “Paid”, you will get an e-mail notification that the invoice is being paid.
If you have any questions you can simply contact your customer through normal channels or enter a comment on the invoice if your customer allows it.To check the status of the invoice or payment, use the link below:
View Invoice Never Miss an Invoice with Coupa
Orders
Invoices
Payments
Log In Now
Business Spend Management
by do_not_reply@intuitive.coupahost.com - 12:12 - 15 Jul 2026 -
PAID Invoice 28011 from Schneider & Stone, PLC
Schneider & Stone, PLC Invoice Email: billing@chandleraccountant.com Due amount: 0.00 Phone: 480-779-4222 PAIDPowered by QuickBooks.
Dear Christopher Berger:
Thank you for your business - we appreciate it very much.
Sincerely,
Schneider & Stone, PLC
480-779-4222
www.chandleraccountant.com
If you do not recognize the sender or the transaction, reach out to frauds@intuit.com 
Intuit, Inc. All rights reserved. Privacy | Security | Terms of service
by quickbooks@notification.intuit.com - 12:07 - 15 Jul 2026 -
C# 20944185 AZ - Additional Information Requested
12575 Uline Drive · Pleasant Prairie, WI 53158
PHONE (262) 612-4200 · WEB uline.com · FAX (262) 612-4276
July 15, 2026
Turnpack
6922 E Via Northgate
Ste 101
Mesa, AZ 85212
Hello Christopher Berger,
Customer #: 20944185
Thank you for submitting your sales tax exemption information.
In order to qualify for sales tax exemption, please advise how your company uses Non-Packaging Tapes/Adhesives, Tags, Safety/Protection Gear, and Warehouse Supplies to determine if they comply with Arizona regulations.
Once received, your account will be updated accordingly.
Thank you,
Meilin K.
Tax Department
(888) 362-1909
TaxDepartment@uline.com
Upload via www.Uline.com/tax: Sign in requiredCHICAGO · ATLANTA · COLUMBUS · DALLAS · LOS ANGELES · MIAMI · MINNEAPOLIS · NYC/PHILA · RENO · SEATTLE
INTERNATIONAL: MEXICALI · MONTERREY · EDMONTON · TORONTO
by taxdepartment@uline.com - 12:07 - 15 Jul 2026-
RE: C#20944185 AZ - Additional Information Requested
Hello Lorena,
Please further advise how your company uses the following items to determine if they comply with Arizona regulations.
H-3687BL - Uline Trash Can - 32 Gallon, Black / Janitorial Supplies
H-1213BL - Collapsible Bulk Container - 32 x 30 x 34", 2,000 lb Capacity, Black / Warehouse Supplies
H-7836 - Horizontal Bar Rack - 56 x 60 x 60" / Warehouse Supplies
H-7835 - Tabletop Power Strip - 18 Outlet / Warehouse Supplies
Please note: These items are are typically used internally and deemed as taxable per the state.
Note: Your account has been updated for Packaging Supplies, Material Handling Equipment, and select Warehouse Supplies. If seeking exemption on additional products, please explain how those items qualify for exemption.
Thank you,
Luke G.
Tax Department
(888) 362-1909
TaxDepartment@uline.com
Upload via uline.com/tax: Sign in required
From:
"Turnpack LLC" <info@turnpack.com>
Date: 07/15/2026 12:21 PM
To:
<taxdepartment@uline.com>
Subject:
RE: C# 20944185 AZ - Additional Information Requested
Materials are used directly in the manufacturing process or used or resold goods.
Here are both our tax exempt forms.
Thank you for your time,
Lorena Carrillo
From: taxdepartment@uline.com <taxdepartment@uline.com>
Sent: Wednesday, July 15, 2026 9:04 AM
To: info@turnpack.com
Subject: C# 20944185 AZ - Additional Information Requested
12575 Uline Drive · Pleasant Prairie, WI 53158
PHONE (262) 612-4200 · WEB uline.com · FAX (262) 612-4276July 15, 2026
Turnpack
6922 E Via Northgate
Ste 101
Mesa, AZ 85212
Hello Christopher Berger,Customer #: 20944185
Thank you for submitting your sales tax exemption information.
In order to qualify for sales tax exemption, please advise how your company uses Non-Packaging Tapes/Adhesives, Tags, Safety/Protection Gear, and Warehouse Supplies to determine if they comply with Arizona regulations.
Once received, your account will be updated accordingly.
Thank you,
Meilin K.
Tax Department
(888) 362-1909
TaxDepartment@uline.com
Upload via www.Uline.com/tax: Sign in requiredCHICAGO · ATLANTA · COLUMBUS · DALLAS · LOS ANGELES · MIAMI · MINNEAPOLIS · NYC/PHILA · RENO · SEATTLE
INTERNATIONAL: MEXICALI · MONTERREY · EDMONTON · TORONTO
by "Tax Inbox" <TaxDepartment@uline.com> - 02:37 - 15 Jul 2026-
Re: C#20944185 AZ - Account Updated
Hello Lorena,
Thank you for confirming this information.
Invoice 210535242 has been credited based on the information received.
A revised invoice is attached per your request.
Please let us know if you have any additional questions.
Thank you,
(See attached file: Inv 210535242.pdf)
Dain J.
Tax Department
(888) 362-1909
TaxDepartment@uline.com
Upload via uline.com/tax: Sign in required
"Turnpack LLC" ---07/15/2026 01:48:13 PM---Trash can is used internally for dispose of manufacturing materials. All other items are used to sto
From:
"Turnpack LLC" <info@turnpack.com>
Date: 07/15/2026 01:48 PM
To:
"'Tax Inbox'" <TaxDepartment@uline.com>
Subject:
RE: C#20944185 AZ - Additional Information Requested
Trash can is used internally for dispose of manufacturing materials. All other items are used to store, provide power directly to manufacturing of equipment.
Qualifying Purchases: Includes machinery/equipment used directly in manufacturing, pollution control, R&D, and replacement parts.
Energy Exemption: Businesses principally engaged in manufacturing can qualify for tax exemptions on electricity and natural gas. To qualify, you must derive at least 51% of your gross income from AZ manufactured products and use at least 51% of your facility/workforce for manufacturing.
Eligible Industries: Applies to processing, fabrication, job printing, refining, mining, and research and development
Thank you for your time,
Lorena Carrillo
From: Tax Inbox <TaxDepartment@uline.com>
Sent: Wednesday, July 15, 2026 11:37 AM
To: Turnpack LLC <info@turnpack.com>
Subject: RE: C#20944185 AZ - Additional Information Requested
Hello Lorena,
Please further advise how your company uses the following items to determine if they comply with Arizona regulations.
H-3687BL - Uline Trash Can - 32 Gallon, Black / Janitorial Supplies
H-1213BL - Collapsible Bulk Container - 32 x 30 x 34", 2,000 lb Capacity, Black / Warehouse Supplies
H-7836 - Horizontal Bar Rack - 56 x 60 x 60" / Warehouse Supplies
H-7835 - Tabletop Power Strip - 18 Outlet / Warehouse Supplies
Please note: These items are are typically used internally and deemed as taxable per the state.
Note: Your account has been updated for Packaging Supplies, Material Handling Equipment, and select Warehouse Supplies. If seeking exemption on additional products, please explain how those items qualify for exemption.
Thank you,
Luke G.
(888) 362-1909
TaxDepartment@uline.com
Upload via uline.com/tax: Sign in required
From:
"Turnpack LLC" <info@turnpack.com>Date: 07/15/2026 12:21 PM
To:
<taxdepartment@uline.com>
Subject:
RE: C# 20944185 AZ - Additional Information Requested
Materials are used directly in the manufacturing process or used or resold goods.
Here are both our tax exempt forms.
Thank you for your time,
Lorena Carrillo
From: taxdepartment@uline.com <taxdepartment@uline.com>
Sent: Wednesday, July 15, 2026 9:04 AM
To: info@turnpack.com
Subject: C# 20944185 AZ - Additional Information Requested
12575 Uline Drive · Pleasant Prairie, WI 53158
PHONE (262) 612-4200 · WEB uline.com · FAX (262) 612-4276July 15, 2026
Turnpack
6922 E Via Northgate
Ste 101
Mesa, AZ 85212
Hello Christopher Berger,Customer #: 20944185
Thank you for submitting your sales tax exemption information.
In order to qualify for sales tax exemption, please advise how your company uses Non-Packaging Tapes/Adhesives, Tags, Safety/Protection Gear, and Warehouse Supplies to determine if they comply with Arizona regulations.
Once received, your account will be updated accordingly.
Thank you,
Meilin K.
Tax Department
(888) 362-1909
TaxDepartment@uline.com
Upload via www.Uline.com/tax: Sign in requiredCHICAGO · ATLANTA · COLUMBUS · DALLAS · LOS ANGELES · MIAMI · MINNEAPOLIS · NYC/PHILA · RENO · SEATTLE
INTERNATIONAL: MEXICALI · MONTERREY · EDMONTON · TORONTO
by "Tax Inbox" <TaxDepartment@uline.com> - 03:41 - 15 Jul 2026
-
-
-
Shipped: 1 Hardware item
Your package was shipped!OrderedShippedOut for deliveryDeliveredArriving July 24Turnpack - MESA, AZ - On behalf of TurnpackOrder # 114-2835047-42834441 Hardware item
Total $41.28 View related transactions in Your Transactions. ©2026 Amazon.com, Inc. or its affiliates. Amazon and all related marks are trademarks of Amazon.com, Inc. or its affiliates, Amazon.com, Inc. 410 Terry Avenue N., Seattle, WA 98109.Your invoice can be accessed here.
One or more items in your shipment was supplied by a different seller than the seller you purchased the item from. Visit Your Orders from a web browser to see the suppliers of these items on your invoices.
Unless otherwise noted, items sold by Amazon are subject to sales tax in selected states or provinces in accordance with the applicable laws of that state. If your order contains one or more items from a seller other than Amazon, it may be subject to local and state or province tax, depending upon the sellers business policies and the location of their operations. For more information, go to tax and seller information.
by "Amazon.com" <shipment-tracking@amazon.com> - 11:54 - 15 Jul 2026 -
Your shipment was delivered 874331498777
FedEx
Your shipment was delivered. Delivery Date Wed, 07/15/2026
10:22am
Delivered to 10610 METRIC DR, Dallas, TX 75243 Received by CJOHNSON Report missing package How was your delivery? 
Personal message Your Dongle has shipped. Tracking details Tracking ID 874331498777 From Turnpack LLC
christopher berger
22425 S SCOTLAND CT
Suite 104
QUEEN CREEK, AZ, US
85142To Omron
Bradley Dang
10610 Metric Drive
114
Dallas, TX, US
75243Ship date Mon 7/13/2026 12:00 AM Number of pieces 1 Total shipment weight 1.00 LB Service FedEx Ground Reference dongle return TRACK SHIPMENT 
Track your package and see when it's coming With Map View, follow your package's journey and get an estimated delivery time window—so you can plan ahead and avoid missed deliveries. DOWNLOAD THE MOBILE APP This tracking update has been requested by: Company name christopher berger Name Turnpack LLC Email info@turnpack.com 
Please do not respond to this message. This email was sent from an unattended mailbox. This report was generated at approximately 10:33 AM CDT 07/15/2026.All weights are estimated.
To track the latest status of your shipment, click on the tracking number above.
Standard transit is the date and time the package is scheduled to be delivered by, based on the selected service, destination and ship date. Limitations and exceptions may apply. Please see the FedEx Service Guide for terms and conditions of service, including the FedEx Money-Back Guarantee, or contact your FedEx Customer Support representative.
© 2026 Federal Express Corporation. The content of this message is protected by copyright and trademark laws under U.S. and international law. Review our Privacy Notice. All rights reserved.
Thank you for your business.
ID 1026
by "FedEx Tracking" <TrackingUpdates@fedex.com> - 11:38 - 15 Jul 2026 -
RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?
Hi Jayna
Did you receive tracking info from Toyo yet?
I just pinged Cindy and Eric at factory to send over in case you have not seen it yet.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Info at Turnpack <info@turnpack.com>
Sent: Tuesday, July 14, 2026 5:32 PM
To: Jayna Hanselman <jaynah@msitec.com>
Cc: Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Christopher Berger <cberger@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?You don't often get email from info@turnpack.com. Learn why this is important
Hello team, any update on this order?
Respectfully,
Lorena CarrilloOn Mon, Jul 6, 2026, 9:54 AM Jayna Hanselman <jaynah@msitec.com> wrote:
Thank you, Chris!
Jayna Hanselman| Account Coordinator
MSI TEC
p: 602-426-1333
w: msitec.com
From: Chris Keller <chrisk@waisales.com>
Sent: Monday, July 6, 2026 9:30 AM
To: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>; Jayna Hanselman <jaynah@msitec.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Hey guys
Hope everyone had a nice holiday weekend.
The ship date from production team was then confirmed July 16, but we have asked them to expedite the order, and they are now targeting shipment on July 10.
We will keep you posted if there any changes. Thanks.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Thursday, July 2, 2026 12:29 PM
To: 'Mario Garcia' <mario.garcia@msitec.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Hello Team please see updated ship date for these parts.
Thank you for your time,
Lorena Carrillo
From: Mario Garcia <mario.garcia@msitec.com>
Sent: Monday, June 29, 2026 6:14 PM
To: Christopher Berger <cberger@turnpack.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Chris,
These are meant to work with the 60mm frame Omron motor below; image received by Brandon last week
Omron Motor [Shaft Diameter = 11mm]:
From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, June 29, 2026 4:11 PM
To: Mario Garcia <mario.garcia@msitec.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Thanks Mario. These will also work with the Omron motors, correct?
@Lorena Carrillo If Mario confirms please proceed and place the order. I will create the project to assign this to.
Chris
On Mon, Jun 29, 2026 at 4:07 PM Mario Garcia <mario.garcia@msitec.com> wrote:
Brandon,
You can proceed with same pricing as before. After we get a Purchase order, TOYO will generate drawings for you to approve. Shipping after receipt of order is about 4 weeks.
X: GLTH12-L12-600-BL-Y40-C4P2
Price: $1,970 each + 10% Tariff
Y: GLTH8-L12-300-BL-Y20-C4P2
Price: $1,167 each+ 10% Tariff
Z: GLTH5-L6-150-BC-Y10B-C4P2
Price: $970 each + 10% Tariff
Estimated Shipping for QTY(1) each above is ~$250 total
4 week Lead Time
MARIO GARCIA | FIELD AUTOMATION ENGINEER
MSITEC
p: 602.426.1333 | c: 480.299.4701
w: msitec.com
From: Brandon Benavidez <bbenavidez@turnpack.com>
Sent: Tuesday, June 23, 2026 8:32 AM
To: Chris Keller <chrisk@waisales.com>; Mario Garcia <mario.garcia@msitec.com>
Cc: Christopher Berger <cberger@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Chris/Mario,
Yesterday, we were able to look more closely at the 24" x 36" [FactoryRobot] machine and found one small change we'd like to make. When you get a chance, please update the quote to include the following changes (including those needed for the appropriate motor mounting). Since this is just for the actuators, can you ensure they will work with our current Omron motors? The CAD I currently have for the actuators lacks the appropriate mounting. I've included the Omron motor drawing below for reference.
Actuator Part Numbers:
X: GLTH12-L12-600-BL-Y40-C4P2
Y: GLTH8-L12-300-BL-Y20-C4P2_0 [Previously was: GLTH8-L12-300-BR-Y20-C4P2_0]
Z: GLTH5-L6-150-BC-Y10B-C4P2_0
Omron Motor [Shaft Diameter = 11mm]:
Please let us know if you need anything additional. Thank you
Best regards,
Brandon Benavidez - Mechanical Engineer
Turnpack, LLC
Phone #: 1 (480) 276-2897
On Mon, Jun 22, 2026 at 6:53 AM Chris Keller <chrisk@waisales.com> wrote:
Hello all
The estimated ship date from Toyo for the ordered actuators for 19”x20” FactoryLab is 7/11.
@Mario Garcia – Cindy at Toyo will have tracking on/by July 11th.
@Christopher Berger/@Lorena Carrillo – did you place the PO for the actuators for 24”x36” FactoryRobot with MSI on Friday?
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Chris Keller
Sent: Friday, June 19, 2026 11:00 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesGood to hear on the 24” x 36”.
Totally understand the time constraint issue.
Checking on that PO placed on 6/10 and will provide delivery update by Monday.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, June 18, 2026 9:40 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesThe 24" x 36" will be finalized tomorrow. For the last two weeks we had 0 availability to work on this project and I had hoped to get the orders in before.
Can you confirm that order PO26211760, placed on 06/10 for the 21" x 19" is being processed and still expected to arrive on 07/08?
Chris
On Wed, Jun 17, 2026 at 9:13 AM Chris Keller <chrisk@waisales.com> wrote:
Thanks for the reply and update Lorena.
@'Christopher Berger' is the one to approve.
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Tuesday, June 16, 2026 6:12 PM
To: Chris Keller <chrisk@waisales.com>; 'Christopher Berger' <cberger@turnpack.com>; 'Mario Garcia' <mario.garcia@msitec.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesHi no I have not placed the PO yet. Please confirm final approval.
Thank you for your time,
Lorena Carrillo
From: Chris Keller <chrisk@waisales.com>
Sent: Tuesday, June 16, 2026 7:25 AM
To: Christopher Berger <cberger@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesGood morning Chris and team,
Have you placed the below order with Mario/MSI TEC?
With this, we should have the two XYZ systems (19x20” and 24x36” — Factory Lab and Factory Robot) covered.
I’ll check on delivery dates with Toyo today.
The remaining item is the FactoryCube XXYY. I’ll send a separate note on that shortly.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, June 10, 2026 9:28 AM
To: Mario Garcia <mario.garcia@msitec.com>
Cc: Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesMario,
we'll place the order for these stages by tomorrow:
X: GLTH12-L12-600-BL-Y40-C4P2
Price: $1,970 each + 10% Tariff
Y: GLTH8-L12-300-BR-Y20-C4P2
Price: $1,167 each+ 10% Tariff
Z: GLTH5-L6-150-BC-Y10B-C4P2
Price: $970 each + 10% Tariff
Estimated Shipping for QTY(1) each above is ~$250 total
4 week Lead Time
Chris
On Mon, Jun 8, 2026 at 4:00 PM Mario Garcia <mario.garcia@msitec.com> wrote:
Chris,
Pricing below for Actuators Only. I do also provide a ball park price on a MultiAxisSystem version. If its within budget, we can send you a formal quote and 3D file for the MultiAxis System; we need commitment from the customer of an upcoming purchase as this take some engineering time to prepare.
X: GLTH12-L12-600-BL-Y40-C4P2
Price: $1,970 each + 10% Tariff
Y: GLTH8-L12-300-BR-Y20-C4P2
Price: $1,167 each+ 10% Tariff
Z: GLTH5-L6-150-BC-Y10B-C4P2
Price: $970 each + 10% Tariff
Estimated Shipping for QTY(1) each above is ~$250 total
4 week Lead Time
Multi Axis System Price ~$5,300 + 10% Tariff + $500 Shipping 5 to 6 weeks Lead Time.
Catalog Download Ball Screw Linear Actuator - GLTH Series
MARIO GARCIA | FIELD AUTOMATION ENGINEER
MSITEC
p: 602.426.1333 | c: 480.299.4701
w: msitec.com
From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, June 8, 2026 7:21 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesChris,
for the 36"x24" Cantilever gantry the way I see this is:
X: GLTH12-L12-600-BL-Y40-C4P2Y: GLTH8-L12-300-BR-Y20-C4P2
Z: GLTH5-L6-150-BC-Y10B-C4P2
I picked Yaskawa motors but for the time being, I guess we'll buy without motors and single stages. I didn't see on the website where it would show me the specs for these stages. Can you send them to me?
Chris
On Fri, Jun 5, 2026 at 10:08 AM Chris Keller <chrisk@waisales.com> wrote:
Sounds good, please let us know if anything is unclear, we know you need this quickly, you mentioned this one is more urgent than the 19X20” Factory Lab…
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, June 4, 2026 10:59 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesChris,
We are looking at the CAD today and hopefully will have an answer EOD. We must attach the motors to these part numbers to determine the full length before making a decision.
Chris
On Thu, Jun 4, 2026 at 7:50 AM Chris Keller <chrisk@waisales.com> wrote:
Hi Chris
Please verify the open bullets today so we can complete the part number and issue correct quote
We have pricing ready and can send as soon as you confirm.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: doug@toyorobot.com <doug@toyorobot.com>
Sent: Wednesday, June 3, 2026 5:02 PM
To: Sacha Marcroft <sacham@waisales.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Mario Garcia' <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; 'Brandon Benavidez' <bbenavidez@turnpack.com>; 'Lorena Carrillo' <lcarrillo@turnpack.com>; 'TOYO TA1' <ta1@toyorobot.com>; 'Eric Zeng' <ericzeng@toyorobotics.com>; 'Doug Kiernan' <doug@toyorobotics.com>
Subject: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesChris B,
As a follow up to our meeting today.
Here are options for a 24x36 envelope cantilvered system.
Standard actuator leadtime ~3-4 weeks
Create MAS Kit +1-2 weeks.
Catalog section attached.
You can download models here – https://toyo.partcommunity.com/
GLTH12-L?-600-B?-M40-E5
Pick lead, 6, 12, 24mm
600mm stroke = 873mm (34.3”) OAL
Confirm motor position, BL/BR/BM
Confirm motor mount
GLTH8-L?-300-B?-M40-E5
Pick lead, 6, 12, 24mm
300mm stroke = 592mm (23.3”) OAL
Confirm motor position, BL/BR/BM
Confirm motor mount
GLTH5-L?-150-B?-M40-E5
Pick lead, 2, 6, 12, 20mm
Confirm motor position, BL/BR/BM – do you need parallel mount or is in-line, BC okay?
Confirm motor mount
Do you want any limit or home sensors?
Regards,
Doug KiernanTOYO Automation
415.264.9787
*Please note my new email and update your CRM: doug@toyorobotics.com
New TOYO Robotics Americas website going live soon!
From: Sacha Marcroft <sacham@waisales.com>
Sent: Friday, May 22, 2026 11:15 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>; doug@toyorobot.com; TOYO TA1 <ta1@toyorobot.com>; Eric Zeng <ericzeng@toyorobotics.com>
Subject: RE: Place holder for todays call - second system with Motors and DrivesYeah sure we discussed potentially having a traveler on X so was looking at the clearance. With traveler we don’t need the GTH12 since we are splitting the load. The Gth8 Carriage is 160mm (sorry mentioned 120mm that was incorrect) and Z is roughly 55mm wide. We can add an undriven GTH5 traveler (very smooth) traveler or profile so there is no interfere with Y and Z axis on the traveler side.
Rough concept shows profile rail but we use our actuators as travelers as well.
Sacha Marcroft
VP Motion Division
Western Automation
714-473-4883
From: Christopher Berger <cberger@turnpack.com>
Sent: Friday, May 22, 2026 10:45 AM
To: Sacha Marcroft <sacham@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>; doug@toyorobot.com; TOYO TA1 <ta1@toyorobot.com>; Eric Zeng <ericzeng@toyorobotics.com>
Subject: Re: Place holder for todays call - second system with Motors and DrivesThanks Sacha. Looking at the model and your email you are proposing a T-style gantry which we would prefer for clearance reasons but can you briefly explain what you mean by this bullet point?
- GTH8 with motor wrap and 600mm travel is 35” long. Carriage is 120mm and the Width 80mm so traveler or X’ would fit nicely below.
Thanks
Chris
On Fri, May 22, 2026 at 9:19 AM Sacha Marcroft <sacham@waisales.com> wrote:
Hey Gents,
First pass at the larger T stage. T stage Spec’s below and potential solution stages reviewed. Let me know your initial thoughts then we will move to providing a MAS quote.
Attached is the XY potential using GTH12 on x and GTH8 on Y for the 36”x 24” plate.
- XYZ Ballscrew stages for 36" x 24" baseplate without motors (we have/can get Omron Servo Motors)
- XYZ Ballscrew stages for 36" x 24" baseplate with motors
- MAS Ballscrew system for 36" x 24" with Motors
- Option: Add Linear encoder
36” long axis:
- GTH12 with motor wrap and 600mm travel is 34.4” long
- GTH12 with motor wrap and 650mm travel is 36.35” long
- GTH8 with motor wrap and 600mm travel is 35” long. Carriage is 120mm and the Width 80mm so traveler or X’ would fit nicely below.
24” axis:
- GTH8 with motor wrap and 300mm travel is 23.26” long.
6” Z axis:
- GTH5 with motor wrap and 150mm travel is 14.25” long. With motor wrap we need to consider 60mm motor mount. I am sure they have made one but need to check. The stage is 52mm wide model shows a 100w motor
Sacha Marcroft
VP Motion Division
Western Automation
714-473-4883
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, May 21, 2026 3:49 PM
To: Sacha Marcroft <sacham@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Place holder for todays call - second system with Motors and DrivesJust to summarize this one more time:
- FactoryLab
- XYZ Ballscrew stages for 20" x 19" baseplate without motors (we have/can get Omron Servo Motors) -> We are ready to order
- XYZ Ballscrew stages for 20" x 19" baseplate with motors
- MAS Ballscrew system for 20" x 19" with Motors
- Option: Add Linear encoder
- FactoryCube
- XYZ Gantry Linear stages: 400mm dual Y, 500mm X, 150mm Z
- XYZ Gantry Ballscrew stages: 400mm dual Y, 500mm X, 150mm Z
- XXYY Wafer table: ballscrew 350mm min travel for 12" wafer -> We are ready to order
- Option: Add Linear Encoder to Ballscrew stages
- FactoryRobot:
- XYZ Ballscrew stages for 36" x 24" baseplate without motors (we have/can get Omron Servo Motors)
- XYZ Ballscrew stages for 36" x 24" baseplate with motors
- MAS Ballscrew system for 36" x 24" with Motors
- Option: Add Linear encoder
What we will place orders for depends on lead time and pricing but I am interested to get lead time and pricing for all listed items.
Chris
On Thu, May 21, 2026 at 1:28 PM Sacha Marcroft <sacham@waisales.com> wrote:
Let me know if this time slot fits and if not make recommendations for another slot.
Thanks,
________________________________________________________________________________
Microsoft Teams meeting
Meeting ID: 227 243 475 332 88
Passcode: 7dg33tp2
Dial in by phone
+1 469-998-7643,,99664092# United States, Dallas
Phone conference ID: 996 640 92#
For organizers: Meeting options | Reset dial-in PIN
________________________________________________________________________________
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
CONFIDENTIALITY NOTICE: This e-mail transmission and any documents, files or previous messages attached to it may contain confidential or legally privileged information. If you are not the intended recipient, you are hereby notified that you must not read this transmission and that any disclosure, copying, printing, distribution or use of any of the information contained in or attached to this transmission is strictly prohibited. If you received this transmission in error, please immediately notify the sender by telephone or return e-mail and delete the original transmission and its attachments without reading or saving in any manner.
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
by "Chris Keller" <chrisk@waisales.com> - 11:32 - 15 Jul 2026-
RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?
All, we pinged Toyo for tracking information and have the following update this morning:
We're sorry to inform you that this shipment has been postponed to July 23 due to a shortage of the MAS-bracket and motor mount. Please rest assured we are closely following up and doing our best to have the goods ready for shipment as soon as possible.
We've let Toyo know we'd prefer to be informed upfront on delivery delays moving forward.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Chris Keller
Sent: Wednesday, July 15, 2026 8:30 AM
To: Info at Turnpack <info@turnpack.com>; Jayna Hanselman <jaynah@msitec.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Christopher Berger <cberger@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Hi Jayna
Did you receive tracking info from Toyo yet?
I just pinged Cindy and Eric at factory to send over in case you have not seen it yet.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Info at Turnpack <info@turnpack.com>
Sent: Tuesday, July 14, 2026 5:32 PM
To: Jayna Hanselman <jaynah@msitec.com>
Cc: Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Christopher Berger <cberger@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?You don't often get email from info@turnpack.com. Learn why this is important
Hello team, any update on this order?
Respectfully,
Lorena CarrilloOn Mon, Jul 6, 2026, 9:54 AM Jayna Hanselman <jaynah@msitec.com> wrote:
Thank you, Chris!
Jayna Hanselman| Account Coordinator
MSI TEC
p: 602-426-1333
w: msitec.com
From: Chris Keller <chrisk@waisales.com>
Sent: Monday, July 6, 2026 9:30 AM
To: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>; Jayna Hanselman <jaynah@msitec.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Hey guys
Hope everyone had a nice holiday weekend.
The ship date from production team was then confirmed July 16, but we have asked them to expedite the order, and they are now targeting shipment on July 10.
We will keep you posted if there any changes. Thanks.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Thursday, July 2, 2026 12:29 PM
To: 'Mario Garcia' <mario.garcia@msitec.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Hello Team please see updated ship date for these parts.
Thank you for your time,
Lorena Carrillo
From: Mario Garcia <mario.garcia@msitec.com>
Sent: Monday, June 29, 2026 6:14 PM
To: Christopher Berger <cberger@turnpack.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Chris,
These are meant to work with the 60mm frame Omron motor below; image received by Brandon last week
Omron Motor [Shaft Diameter = 11mm]:
From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, June 29, 2026 4:11 PM
To: Mario Garcia <mario.garcia@msitec.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Thanks Mario. These will also work with the Omron motors, correct?
@Lorena Carrillo If Mario confirms please proceed and place the order. I will create the project to assign this to.
Chris
On Mon, Jun 29, 2026 at 4:07 PM Mario Garcia <mario.garcia@msitec.com> wrote:
Brandon,
You can proceed with same pricing as before. After we get a Purchase order, TOYO will generate drawings for you to approve. Shipping after receipt of order is about 4 weeks.
X: GLTH12-L12-600-BL-Y40-C4P2
Price: $1,970 each + 10% Tariff
Y: GLTH8-L12-300-BL-Y20-C4P2
Price: $1,167 each+ 10% Tariff
Z: GLTH5-L6-150-BC-Y10B-C4P2
Price: $970 each + 10% Tariff
Estimated Shipping for QTY(1) each above is ~$250 total
4 week Lead Time
MARIO GARCIA | FIELD AUTOMATION ENGINEER
MSITEC
p: 602.426.1333 | c: 480.299.4701
w: msitec.com
From: Brandon Benavidez <bbenavidez@turnpack.com>
Sent: Tuesday, June 23, 2026 8:32 AM
To: Chris Keller <chrisk@waisales.com>; Mario Garcia <mario.garcia@msitec.com>
Cc: Christopher Berger <cberger@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Chris/Mario,
Yesterday, we were able to look more closely at the 24" x 36" [FactoryRobot] machine and found one small change we'd like to make. When you get a chance, please update the quote to include the following changes (including those needed for the appropriate motor mounting). Since this is just for the actuators, can you ensure they will work with our current Omron motors? The CAD I currently have for the actuators lacks the appropriate mounting. I've included the Omron motor drawing below for reference.
Actuator Part Numbers:
X: GLTH12-L12-600-BL-Y40-C4P2
Y: GLTH8-L12-300-BL-Y20-C4P2_0 [Previously was: GLTH8-L12-300-BR-Y20-C4P2_0]
Z: GLTH5-L6-150-BC-Y10B-C4P2_0
Omron Motor [Shaft Diameter = 11mm]:
Please let us know if you need anything additional. Thank you
Best regards,
Brandon Benavidez - Mechanical Engineer
Turnpack, LLC
Phone #: 1 (480) 276-2897
On Mon, Jun 22, 2026 at 6:53 AM Chris Keller <chrisk@waisales.com> wrote:
Hello all
The estimated ship date from Toyo for the ordered actuators for 19”x20” FactoryLab is 7/11.
@Mario Garcia – Cindy at Toyo will have tracking on/by July 11th.
@Christopher Berger/@Lorena Carrillo – did you place the PO for the actuators for 24”x36” FactoryRobot with MSI on Friday?
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Chris Keller
Sent: Friday, June 19, 2026 11:00 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesGood to hear on the 24” x 36”.
Totally understand the time constraint issue.
Checking on that PO placed on 6/10 and will provide delivery update by Monday.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, June 18, 2026 9:40 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesThe 24" x 36" will be finalized tomorrow. For the last two weeks we had 0 availability to work on this project and I had hoped to get the orders in before.
Can you confirm that order PO26211760, placed on 06/10 for the 21" x 19" is being processed and still expected to arrive on 07/08?
Chris
On Wed, Jun 17, 2026 at 9:13 AM Chris Keller <chrisk@waisales.com> wrote:
Thanks for the reply and update Lorena.
@'Christopher Berger' is the one to approve.
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Tuesday, June 16, 2026 6:12 PM
To: Chris Keller <chrisk@waisales.com>; 'Christopher Berger' <cberger@turnpack.com>; 'Mario Garcia' <mario.garcia@msitec.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesHi no I have not placed the PO yet. Please confirm final approval.
Thank you for your time,
Lorena Carrillo
From: Chris Keller <chrisk@waisales.com>
Sent: Tuesday, June 16, 2026 7:25 AM
To: Christopher Berger <cberger@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesGood morning Chris and team,
Have you placed the below order with Mario/MSI TEC?
With this, we should have the two XYZ systems (19x20” and 24x36” — Factory Lab and Factory Robot) covered.
I’ll check on delivery dates with Toyo today.
The remaining item is the FactoryCube XXYY. I’ll send a separate note on that shortly.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, June 10, 2026 9:28 AM
To: Mario Garcia <mario.garcia@msitec.com>
Cc: Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesMario,
we'll place the order for these stages by tomorrow:
X: GLTH12-L12-600-BL-Y40-C4P2
Price: $1,970 each + 10% Tariff
Y: GLTH8-L12-300-BR-Y20-C4P2
Price: $1,167 each+ 10% Tariff
Z: GLTH5-L6-150-BC-Y10B-C4P2
Price: $970 each + 10% Tariff
Estimated Shipping for QTY(1) each above is ~$250 total
4 week Lead Time
Chris
On Mon, Jun 8, 2026 at 4:00 PM Mario Garcia <mario.garcia@msitec.com> wrote:
Chris,
Pricing below for Actuators Only. I do also provide a ball park price on a MultiAxisSystem version. If its within budget, we can send you a formal quote and 3D file for the MultiAxis System; we need commitment from the customer of an upcoming purchase as this take some engineering time to prepare.
X: GLTH12-L12-600-BL-Y40-C4P2
Price: $1,970 each + 10% Tariff
Y: GLTH8-L12-300-BR-Y20-C4P2
Price: $1,167 each+ 10% Tariff
Z: GLTH5-L6-150-BC-Y10B-C4P2
Price: $970 each + 10% Tariff
Estimated Shipping for QTY(1) each above is ~$250 total
4 week Lead Time
Multi Axis System Price ~$5,300 + 10% Tariff + $500 Shipping 5 to 6 weeks Lead Time.
Catalog Download Ball Screw Linear Actuator - GLTH Series
MARIO GARCIA | FIELD AUTOMATION ENGINEER
MSITEC
p: 602.426.1333 | c: 480.299.4701
w: msitec.com
From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, June 8, 2026 7:21 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesChris,
for the 36"x24" Cantilever gantry the way I see this is:
X: GLTH12-L12-600-BL-Y40-C4P2Y: GLTH8-L12-300-BR-Y20-C4P2
Z: GLTH5-L6-150-BC-Y10B-C4P2
I picked Yaskawa motors but for the time being, I guess we'll buy without motors and single stages. I didn't see on the website where it would show me the specs for these stages. Can you send them to me?
Chris
On Fri, Jun 5, 2026 at 10:08 AM Chris Keller <chrisk@waisales.com> wrote:
Sounds good, please let us know if anything is unclear, we know you need this quickly, you mentioned this one is more urgent than the 19X20” Factory Lab…
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, June 4, 2026 10:59 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesChris,
We are looking at the CAD today and hopefully will have an answer EOD. We must attach the motors to these part numbers to determine the full length before making a decision.
Chris
On Thu, Jun 4, 2026 at 7:50 AM Chris Keller <chrisk@waisales.com> wrote:
Hi Chris
Please verify the open bullets today so we can complete the part number and issue correct quote
We have pricing ready and can send as soon as you confirm.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: doug@toyorobot.com <doug@toyorobot.com>
Sent: Wednesday, June 3, 2026 5:02 PM
To: Sacha Marcroft <sacham@waisales.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Mario Garcia' <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; 'Brandon Benavidez' <bbenavidez@turnpack.com>; 'Lorena Carrillo' <lcarrillo@turnpack.com>; 'TOYO TA1' <ta1@toyorobot.com>; 'Eric Zeng' <ericzeng@toyorobotics.com>; 'Doug Kiernan' <doug@toyorobotics.com>
Subject: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesChris B,
As a follow up to our meeting today.
Here are options for a 24x36 envelope cantilvered system.
Standard actuator leadtime ~3-4 weeks
Create MAS Kit +1-2 weeks.
Catalog section attached.
You can download models here – https://toyo.partcommunity.com/
GLTH12-L?-600-B?-M40-E5
Pick lead, 6, 12, 24mm
600mm stroke = 873mm (34.3”) OAL
Confirm motor position, BL/BR/BM
Confirm motor mount
GLTH8-L?-300-B?-M40-E5
Pick lead, 6, 12, 24mm
300mm stroke = 592mm (23.3”) OAL
Confirm motor position, BL/BR/BM
Confirm motor mount
GLTH5-L?-150-B?-M40-E5
Pick lead, 2, 6, 12, 20mm
Confirm motor position, BL/BR/BM – do you need parallel mount or is in-line, BC okay?
Confirm motor mount
Do you want any limit or home sensors?
Regards,
Doug KiernanTOYO Automation
415.264.9787
*Please note my new email and update your CRM: doug@toyorobotics.com
New TOYO Robotics Americas website going live soon!
From: Sacha Marcroft <sacham@waisales.com>
Sent: Friday, May 22, 2026 11:15 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>; doug@toyorobot.com; TOYO TA1 <ta1@toyorobot.com>; Eric Zeng <ericzeng@toyorobotics.com>
Subject: RE: Place holder for todays call - second system with Motors and DrivesYeah sure we discussed potentially having a traveler on X so was looking at the clearance. With traveler we don’t need the GTH12 since we are splitting the load. The Gth8 Carriage is 160mm (sorry mentioned 120mm that was incorrect) and Z is roughly 55mm wide. We can add an undriven GTH5 traveler (very smooth) traveler or profile so there is no interfere with Y and Z axis on the traveler side.
Rough concept shows profile rail but we use our actuators as travelers as well.
Sacha Marcroft
VP Motion Division
Western Automation
714-473-4883
From: Christopher Berger <cberger@turnpack.com>
Sent: Friday, May 22, 2026 10:45 AM
To: Sacha Marcroft <sacham@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>; doug@toyorobot.com; TOYO TA1 <ta1@toyorobot.com>; Eric Zeng <ericzeng@toyorobotics.com>
Subject: Re: Place holder for todays call - second system with Motors and DrivesThanks Sacha. Looking at the model and your email you are proposing a T-style gantry which we would prefer for clearance reasons but can you briefly explain what you mean by this bullet point?
- GTH8 with motor wrap and 600mm travel is 35” long. Carriage is 120mm and the Width 80mm so traveler or X’ would fit nicely below.
Thanks
Chris
On Fri, May 22, 2026 at 9:19 AM Sacha Marcroft <sacham@waisales.com> wrote:
Hey Gents,
First pass at the larger T stage. T stage Spec’s below and potential solution stages reviewed. Let me know your initial thoughts then we will move to providing a MAS quote.
Attached is the XY potential using GTH12 on x and GTH8 on Y for the 36”x 24” plate.
- XYZ Ballscrew stages for 36" x 24" baseplate without motors (we have/can get Omron Servo Motors)
- XYZ Ballscrew stages for 36" x 24" baseplate with motors
- MAS Ballscrew system for 36" x 24" with Motors
- Option: Add Linear encoder
36” long axis:
- GTH12 with motor wrap and 600mm travel is 34.4” long
- GTH12 with motor wrap and 650mm travel is 36.35” long
- GTH8 with motor wrap and 600mm travel is 35” long. Carriage is 120mm and the Width 80mm so traveler or X’ would fit nicely below.
24” axis:
- GTH8 with motor wrap and 300mm travel is 23.26” long.
6” Z axis:
- GTH5 with motor wrap and 150mm travel is 14.25” long. With motor wrap we need to consider 60mm motor mount. I am sure they have made one but need to check. The stage is 52mm wide model shows a 100w motor
Sacha Marcroft
VP Motion Division
Western Automation
714-473-4883
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, May 21, 2026 3:49 PM
To: Sacha Marcroft <sacham@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Place holder for todays call - second system with Motors and DrivesJust to summarize this one more time:
- FactoryLab
- XYZ Ballscrew stages for 20" x 19" baseplate without motors (we have/can get Omron Servo Motors) -> We are ready to order
- XYZ Ballscrew stages for 20" x 19" baseplate with motors
- MAS Ballscrew system for 20" x 19" with Motors
- Option: Add Linear encoder
- FactoryCube
- XYZ Gantry Linear stages: 400mm dual Y, 500mm X, 150mm Z
- XYZ Gantry Ballscrew stages: 400mm dual Y, 500mm X, 150mm Z
- XXYY Wafer table: ballscrew 350mm min travel for 12" wafer -> We are ready to order
- Option: Add Linear Encoder to Ballscrew stages
- FactoryRobot:
- XYZ Ballscrew stages for 36" x 24" baseplate without motors (we have/can get Omron Servo Motors)
- XYZ Ballscrew stages for 36" x 24" baseplate with motors
- MAS Ballscrew system for 36" x 24" with Motors
- Option: Add Linear encoder
What we will place orders for depends on lead time and pricing but I am interested to get lead time and pricing for all listed items.
Chris
On Thu, May 21, 2026 at 1:28 PM Sacha Marcroft <sacham@waisales.com> wrote:
Let me know if this time slot fits and if not make recommendations for another slot.
Thanks,
________________________________________________________________________________
Microsoft Teams meeting
Meeting ID: 227 243 475 332 88
Passcode: 7dg33tp2
Dial in by phone
+1 469-998-7643,,99664092# United States, Dallas
Phone conference ID: 996 640 92#
For organizers: Meeting options | Reset dial-in PIN
________________________________________________________________________________
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
CONFIDENTIALITY NOTICE: This e-mail transmission and any documents, files or previous messages attached to it may contain confidential or legally privileged information. If you are not the intended recipient, you are hereby notified that you must not read this transmission and that any disclosure, copying, printing, distribution or use of any of the information contained in or attached to this transmission is strictly prohibited. If you received this transmission in error, please immediately notify the sender by telephone or return e-mail and delete the original transmission and its attachments without reading or saving in any manner.
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
by "Chris Keller" <chrisk@waisales.com> - 10:21 - 16 Jul 2026-
Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?
Chris,Just to ensure we are all referencing the same order information:- PO26211760: 300mm x 200mm x 100mm -> new ship date 07/23 + transit time?
- PO26261823: 600mm x 300mm x 150mm -> ship date 07/31 (using 4 week lead time estimate) + transit time?
ChrisOn Thu, Jul 16, 2026 at 7:17 AM Chris Keller <chrisk@waisales.com> wrote:All, we pinged Toyo for tracking information and have the following update this morning:
We're sorry to inform you that this shipment has been postponed to July 23 due to a shortage of the MAS-bracket and motor mount. Please rest assured we are closely following up and doing our best to have the goods ready for shipment as soon as possible.
We've let Toyo know we'd prefer to be informed upfront on delivery delays moving forward.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Chris Keller
Sent: Wednesday, July 15, 2026 8:30 AM
To: Info at Turnpack <info@turnpack.com>; Jayna Hanselman <jaynah@msitec.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Christopher Berger <cberger@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Hi Jayna
Did you receive tracking info from Toyo yet?
I just pinged Cindy and Eric at factory to send over in case you have not seen it yet.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Info at Turnpack <info@turnpack.com>
Sent: Tuesday, July 14, 2026 5:32 PM
To: Jayna Hanselman <jaynah@msitec.com>
Cc: Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Christopher Berger <cberger@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?You don't often get email from info@turnpack.com. Learn why this is important
Hello team, any update on this order?
Respectfully,
Lorena CarrilloOn Mon, Jul 6, 2026, 9:54 AM Jayna Hanselman <jaynah@msitec.com> wrote:
Thank you, Chris!
Jayna Hanselman| Account Coordinator
MSI TEC
p: 602-426-1333
w: msitec.com
From: Chris Keller <chrisk@waisales.com>
Sent: Monday, July 6, 2026 9:30 AM
To: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>; Jayna Hanselman <jaynah@msitec.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Hey guys
Hope everyone had a nice holiday weekend.
The ship date from production team was then confirmed July 16, but we have asked them to expedite the order, and they are now targeting shipment on July 10.
We will keep you posted if there any changes. Thanks.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Thursday, July 2, 2026 12:29 PM
To: 'Mario Garcia' <mario.garcia@msitec.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Hello Team please see updated ship date for these parts.
Thank you for your time,
Lorena Carrillo
From: Mario Garcia <mario.garcia@msitec.com>
Sent: Monday, June 29, 2026 6:14 PM
To: Christopher Berger <cberger@turnpack.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Chris,
These are meant to work with the 60mm frame Omron motor below; image received by Brandon last week
Omron Motor [Shaft Diameter = 11mm]:
From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, June 29, 2026 4:11 PM
To: Mario Garcia <mario.garcia@msitec.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Thanks Mario. These will also work with the Omron motors, correct?
@Lorena Carrillo If Mario confirms please proceed and place the order. I will create the project to assign this to.
Chris
On Mon, Jun 29, 2026 at 4:07 PM Mario Garcia <mario.garcia@msitec.com> wrote:
Brandon,
You can proceed with same pricing as before. After we get a Purchase order, TOYO will generate drawings for you to approve. Shipping after receipt of order is about 4 weeks.
X: GLTH12-L12-600-BL-Y40-C4P2
Price: $1,970 each + 10% Tariff
Y: GLTH8-L12-300-BL-Y20-C4P2
Price: $1,167 each+ 10% Tariff
Z: GLTH5-L6-150-BC-Y10B-C4P2
Price: $970 each + 10% Tariff
Estimated Shipping for QTY(1) each above is ~$250 total
4 week Lead Time
MARIO GARCIA | FIELD AUTOMATION ENGINEER
MSITEC
p: 602.426.1333 | c: 480.299.4701
w: msitec.com
From: Brandon Benavidez <bbenavidez@turnpack.com>
Sent: Tuesday, June 23, 2026 8:32 AM
To: Chris Keller <chrisk@waisales.com>; Mario Garcia <mario.garcia@msitec.com>
Cc: Christopher Berger <cberger@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Chris/Mario,
Yesterday, we were able to look more closely at the 24" x 36" [FactoryRobot] machine and found one small change we'd like to make. When you get a chance, please update the quote to include the following changes (including those needed for the appropriate motor mounting). Since this is just for the actuators, can you ensure they will work with our current Omron motors? The CAD I currently have for the actuators lacks the appropriate mounting. I've included the Omron motor drawing below for reference.
Actuator Part Numbers:
X: GLTH12-L12-600-BL-Y40-C4P2
Y: GLTH8-L12-300-BL-Y20-C4P2_0 [Previously was: GLTH8-L12-300-BR-Y20-C4P2_0]
Z: GLTH5-L6-150-BC-Y10B-C4P2_0
Omron Motor [Shaft Diameter = 11mm]:
Please let us know if you need anything additional. Thank you
Best regards,
Brandon Benavidez - Mechanical Engineer
Turnpack, LLC
Phone #: 1 (480) 276-2897
On Mon, Jun 22, 2026 at 6:53 AM Chris Keller <chrisk@waisales.com> wrote:
Hello all
The estimated ship date from Toyo for the ordered actuators for 19”x20” FactoryLab is 7/11.
@Mario Garcia – Cindy at Toyo will have tracking on/by July 11th.
@Christopher Berger/@Lorena Carrillo – did you place the PO for the actuators for 24”x36” FactoryRobot with MSI on Friday?
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Chris Keller
Sent: Friday, June 19, 2026 11:00 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesGood to hear on the 24” x 36”.
Totally understand the time constraint issue.
Checking on that PO placed on 6/10 and will provide delivery update by Monday.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, June 18, 2026 9:40 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesThe 24" x 36" will be finalized tomorrow. For the last two weeks we had 0 availability to work on this project and I had hoped to get the orders in before.
Can you confirm that order PO26211760, placed on 06/10 for the 21" x 19" is being processed and still expected to arrive on 07/08?
Chris
On Wed, Jun 17, 2026 at 9:13 AM Chris Keller <chrisk@waisales.com> wrote:
Thanks for the reply and update Lorena.
@'Christopher Berger' is the one to approve.
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Tuesday, June 16, 2026 6:12 PM
To: Chris Keller <chrisk@waisales.com>; 'Christopher Berger' <cberger@turnpack.com>; 'Mario Garcia' <mario.garcia@msitec.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesHi no I have not placed the PO yet. Please confirm final approval.
Thank you for your time,
Lorena Carrillo
From: Chris Keller <chrisk@waisales.com>
Sent: Tuesday, June 16, 2026 7:25 AM
To: Christopher Berger <cberger@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesGood morning Chris and team,
Have you placed the below order with Mario/MSI TEC?
With this, we should have the two XYZ systems (19x20” and 24x36” — Factory Lab and Factory Robot) covered.
I’ll check on delivery dates with Toyo today.
The remaining item is the FactoryCube XXYY. I’ll send a separate note on that shortly.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, June 10, 2026 9:28 AM
To: Mario Garcia <mario.garcia@msitec.com>
Cc: Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesMario,
we'll place the order for these stages by tomorrow:
X: GLTH12-L12-600-BL-Y40-C4P2
Price: $1,970 each + 10% Tariff
Y: GLTH8-L12-300-BR-Y20-C4P2
Price: $1,167 each+ 10% Tariff
Z: GLTH5-L6-150-BC-Y10B-C4P2
Price: $970 each + 10% Tariff
Estimated Shipping for QTY(1) each above is ~$250 total
4 week Lead Time
Chris
On Mon, Jun 8, 2026 at 4:00 PM Mario Garcia <mario.garcia@msitec.com> wrote:
Chris,
Pricing below for Actuators Only. I do also provide a ball park price on a MultiAxisSystem version. If its within budget, we can send you a formal quote and 3D file for the MultiAxis System; we need commitment from the customer of an upcoming purchase as this take some engineering time to prepare.
X: GLTH12-L12-600-BL-Y40-C4P2
Price: $1,970 each + 10% Tariff
Y: GLTH8-L12-300-BR-Y20-C4P2
Price: $1,167 each+ 10% Tariff
Z: GLTH5-L6-150-BC-Y10B-C4P2
Price: $970 each + 10% Tariff
Estimated Shipping for QTY(1) each above is ~$250 total
4 week Lead Time
Multi Axis System Price ~$5,300 + 10% Tariff + $500 Shipping 5 to 6 weeks Lead Time.
Catalog Download Ball Screw Linear Actuator - GLTH Series
MARIO GARCIA | FIELD AUTOMATION ENGINEER
MSITEC
p: 602.426.1333 | c: 480.299.4701
w: msitec.com
From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, June 8, 2026 7:21 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesChris,
for the 36"x24" Cantilever gantry the way I see this is:
X: GLTH12-L12-600-BL-Y40-C4P2Y: GLTH8-L12-300-BR-Y20-C4P2
Z: GLTH5-L6-150-BC-Y10B-C4P2
I picked Yaskawa motors but for the time being, I guess we'll buy without motors and single stages. I didn't see on the website where it would show me the specs for these stages. Can you send them to me?
Chris
On Fri, Jun 5, 2026 at 10:08 AM Chris Keller <chrisk@waisales.com> wrote:
Sounds good, please let us know if anything is unclear, we know you need this quickly, you mentioned this one is more urgent than the 19X20” Factory Lab…
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, June 4, 2026 10:59 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesChris,
We are looking at the CAD today and hopefully will have an answer EOD. We must attach the motors to these part numbers to determine the full length before making a decision.
Chris
On Thu, Jun 4, 2026 at 7:50 AM Chris Keller <chrisk@waisales.com> wrote:
Hi Chris
Please verify the open bullets today so we can complete the part number and issue correct quote
We have pricing ready and can send as soon as you confirm.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: doug@toyorobot.com <doug@toyorobot.com>
Sent: Wednesday, June 3, 2026 5:02 PM
To: Sacha Marcroft <sacham@waisales.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Mario Garcia' <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; 'Brandon Benavidez' <bbenavidez@turnpack.com>; 'Lorena Carrillo' <lcarrillo@turnpack.com>; 'TOYO TA1' <ta1@toyorobot.com>; 'Eric Zeng' <ericzeng@toyorobotics.com>; 'Doug Kiernan' <doug@toyorobotics.com>
Subject: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesChris B,
As a follow up to our meeting today.
Here are options for a 24x36 envelope cantilvered system.
Standard actuator leadtime ~3-4 weeks
Create MAS Kit +1-2 weeks.
Catalog section attached.
You can download models here – https://toyo.partcommunity.com/
GLTH12-L?-600-B?-M40-E5
Pick lead, 6, 12, 24mm
600mm stroke = 873mm (34.3”) OAL
Confirm motor position, BL/BR/BM
Confirm motor mount
GLTH8-L?-300-B?-M40-E5
Pick lead, 6, 12, 24mm
300mm stroke = 592mm (23.3”) OAL
Confirm motor position, BL/BR/BM
Confirm motor mount
GLTH5-L?-150-B?-M40-E5
Pick lead, 2, 6, 12, 20mm
Confirm motor position, BL/BR/BM – do you need parallel mount or is in-line, BC okay?
Confirm motor mount
Do you want any limit or home sensors?
Regards,
Doug KiernanTOYO Automation
415.264.9787
*Please note my new email and update your CRM: doug@toyorobotics.com
New TOYO Robotics Americas website going live soon!
From: Sacha Marcroft <sacham@waisales.com>
Sent: Friday, May 22, 2026 11:15 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>; doug@toyorobot.com; TOYO TA1 <ta1@toyorobot.com>; Eric Zeng <ericzeng@toyorobotics.com>
Subject: RE: Place holder for todays call - second system with Motors and DrivesYeah sure we discussed potentially having a traveler on X so was looking at the clearance. With traveler we don’t need the GTH12 since we are splitting the load. The Gth8 Carriage is 160mm (sorry mentioned 120mm that was incorrect) and Z is roughly 55mm wide. We can add an undriven GTH5 traveler (very smooth) traveler or profile so there is no interfere with Y and Z axis on the traveler side.
Rough concept shows profile rail but we use our actuators as travelers as well.
Sacha Marcroft
VP Motion Division
Western Automation
714-473-4883
From: Christopher Berger <cberger@turnpack.com>
Sent: Friday, May 22, 2026 10:45 AM
To: Sacha Marcroft <sacham@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>; doug@toyorobot.com; TOYO TA1 <ta1@toyorobot.com>; Eric Zeng <ericzeng@toyorobotics.com>
Subject: Re: Place holder for todays call - second system with Motors and DrivesThanks Sacha. Looking at the model and your email you are proposing a T-style gantry which we would prefer for clearance reasons but can you briefly explain what you mean by this bullet point?
- GTH8 with motor wrap and 600mm travel is 35” long. Carriage is 120mm and the Width 80mm so traveler or X’ would fit nicely below.
Thanks
Chris
On Fri, May 22, 2026 at 9:19 AM Sacha Marcroft <sacham@waisales.com> wrote:
Hey Gents,
First pass at the larger T stage. T stage Spec’s below and potential solution stages reviewed. Let me know your initial thoughts then we will move to providing a MAS quote.
Attached is the XY potential using GTH12 on x and GTH8 on Y for the 36”x 24” plate.
- XYZ Ballscrew stages for 36" x 24" baseplate without motors (we have/can get Omron Servo Motors)
- XYZ Ballscrew stages for 36" x 24" baseplate with motors
- MAS Ballscrew system for 36" x 24" with Motors
- Option: Add Linear encoder
36” long axis:
- GTH12 with motor wrap and 600mm travel is 34.4” long
- GTH12 with motor wrap and 650mm travel is 36.35” long
- GTH8 with motor wrap and 600mm travel is 35” long. Carriage is 120mm and the Width 80mm so traveler or X’ would fit nicely below.
24” axis:
- GTH8 with motor wrap and 300mm travel is 23.26” long.
6” Z axis:
- GTH5 with motor wrap and 150mm travel is 14.25” long. With motor wrap we need to consider 60mm motor mount. I am sure they have made one but need to check. The stage is 52mm wide model shows a 100w motor
Sacha Marcroft
VP Motion Division
Western Automation
714-473-4883
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, May 21, 2026 3:49 PM
To: Sacha Marcroft <sacham@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Place holder for todays call - second system with Motors and DrivesJust to summarize this one more time:
- FactoryLab
- XYZ Ballscrew stages for 20" x 19" baseplate without motors (we have/can get Omron Servo Motors) -> We are ready to order
- XYZ Ballscrew stages for 20" x 19" baseplate with motors
- MAS Ballscrew system for 20" x 19" with Motors
- Option: Add Linear encoder
- FactoryCube
- XYZ Gantry Linear stages: 400mm dual Y, 500mm X, 150mm Z
- XYZ Gantry Ballscrew stages: 400mm dual Y, 500mm X, 150mm Z
- XXYY Wafer table: ballscrew 350mm min travel for 12" wafer -> We are ready to order
- Option: Add Linear Encoder to Ballscrew stages
- FactoryRobot:
- XYZ Ballscrew stages for 36" x 24" baseplate without motors (we have/can get Omron Servo Motors)
- XYZ Ballscrew stages for 36" x 24" baseplate with motors
- MAS Ballscrew system for 36" x 24" with Motors
- Option: Add Linear encoder
What we will place orders for depends on lead time and pricing but I am interested to get lead time and pricing for all listed items.
Chris
On Thu, May 21, 2026 at 1:28 PM Sacha Marcroft <sacham@waisales.com> wrote:
Let me know if this time slot fits and if not make recommendations for another slot.
Thanks,
________________________________________________________________________________
Microsoft Teams meeting
Meeting ID: 227 243 475 332 88
Passcode: 7dg33tp2
Dial in by phone
+1 469-998-7643,,99664092# United States, Dallas
Phone conference ID: 996 640 92#
For organizers: Meeting options | Reset dial-in PIN
________________________________________________________________________________
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
CONFIDENTIALITY NOTICE: This e-mail transmission and any documents, files or previous messages attached to it may contain confidential or legally privileged information. If you are not the intended recipient, you are hereby notified that you must not read this transmission and that any disclosure, copying, printing, distribution or use of any of the information contained in or attached to this transmission is strictly prohibited. If you received this transmission in error, please immediately notify the sender by telephone or return e-mail and delete the original transmission and its attachments without reading or saving in any manner.
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--Christopher Berger
by Chris Berger - 10:26 - 16 Jul 2026-
RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?
Hi Chris
Correct on PO26211760 (7/23 ship date+transit)
Now confirming ship date for PO26261823.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, July 16, 2026 7:25 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Info at Turnpack <info@turnpack.com>; Jayna Hanselman <jaynah@msitec.com>; Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Chris,
Just to ensure we are all referencing the same order information:
- PO26211760: 300mm x 200mm x 100mm -> new ship date 07/23 + transit time?
- PO26261823: 600mm x 300mm x 150mm -> ship date 07/31 (using 4 week lead time estimate) + transit time?
Chris
On Thu, Jul 16, 2026 at 7:17 AM Chris Keller <chrisk@waisales.com> wrote:
All, we pinged Toyo for tracking information and have the following update this morning:
We're sorry to inform you that this shipment has been postponed to July 23 due to a shortage of the MAS-bracket and motor mount. Please rest assured we are closely following up and doing our best to have the goods ready for shipment as soon as possible.
We've let Toyo know we'd prefer to be informed upfront on delivery delays moving forward.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Chris Keller
Sent: Wednesday, July 15, 2026 8:30 AM
To: Info at Turnpack <info@turnpack.com>; Jayna Hanselman <jaynah@msitec.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Christopher Berger <cberger@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Hi Jayna
Did you receive tracking info from Toyo yet?
I just pinged Cindy and Eric at factory to send over in case you have not seen it yet.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Info at Turnpack <info@turnpack.com>
Sent: Tuesday, July 14, 2026 5:32 PM
To: Jayna Hanselman <jaynah@msitec.com>
Cc: Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Christopher Berger <cberger@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?You don't often get email from info@turnpack.com. Learn why this is important
Hello team, any update on this order?
Respectfully,
Lorena CarrilloOn Mon, Jul 6, 2026, 9:54 AM Jayna Hanselman <jaynah@msitec.com> wrote:
Thank you, Chris!
Jayna Hanselman| Account Coordinator
MSI TEC
p: 602-426-1333
w: msitec.com
From: Chris Keller <chrisk@waisales.com>
Sent: Monday, July 6, 2026 9:30 AM
To: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>; Jayna Hanselman <jaynah@msitec.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Hey guys
Hope everyone had a nice holiday weekend.
The ship date from production team was then confirmed July 16, but we have asked them to expedite the order, and they are now targeting shipment on July 10.
We will keep you posted if there any changes. Thanks.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Thursday, July 2, 2026 12:29 PM
To: 'Mario Garcia' <mario.garcia@msitec.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Hello Team please see updated ship date for these parts.
Thank you for your time,
Lorena Carrillo
From: Mario Garcia <mario.garcia@msitec.com>
Sent: Monday, June 29, 2026 6:14 PM
To: Christopher Berger <cberger@turnpack.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Chris,
These are meant to work with the 60mm frame Omron motor below; image received by Brandon last week
Omron Motor [Shaft Diameter = 11mm]:
From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, June 29, 2026 4:11 PM
To: Mario Garcia <mario.garcia@msitec.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Thanks Mario. These will also work with the Omron motors, correct?
@Lorena Carrillo If Mario confirms please proceed and place the order. I will create the project to assign this to.
Chris
On Mon, Jun 29, 2026 at 4:07 PM Mario Garcia <mario.garcia@msitec.com> wrote:
Brandon,
You can proceed with same pricing as before. After we get a Purchase order, TOYO will generate drawings for you to approve. Shipping after receipt of order is about 4 weeks.
X: GLTH12-L12-600-BL-Y40-C4P2
Price: $1,970 each + 10% Tariff
Y: GLTH8-L12-300-BL-Y20-C4P2
Price: $1,167 each+ 10% Tariff
Z: GLTH5-L6-150-BC-Y10B-C4P2
Price: $970 each + 10% Tariff
Estimated Shipping for QTY(1) each above is ~$250 total
4 week Lead Time
MARIO GARCIA | FIELD AUTOMATION ENGINEER
MSITEC
p: 602.426.1333 | c: 480.299.4701
w: msitec.com
From: Brandon Benavidez <bbenavidez@turnpack.com>
Sent: Tuesday, June 23, 2026 8:32 AM
To: Chris Keller <chrisk@waisales.com>; Mario Garcia <mario.garcia@msitec.com>
Cc: Christopher Berger <cberger@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Chris/Mario,
Yesterday, we were able to look more closely at the 24" x 36" [FactoryRobot] machine and found one small change we'd like to make. When you get a chance, please update the quote to include the following changes (including those needed for the appropriate motor mounting). Since this is just for the actuators, can you ensure they will work with our current Omron motors? The CAD I currently have for the actuators lacks the appropriate mounting. I've included the Omron motor drawing below for reference.
Actuator Part Numbers:
X: GLTH12-L12-600-BL-Y40-C4P2
Y: GLTH8-L12-300-BL-Y20-C4P2_0 [Previously was: GLTH8-L12-300-BR-Y20-C4P2_0]
Z: GLTH5-L6-150-BC-Y10B-C4P2_0
Omron Motor [Shaft Diameter = 11mm]:
Please let us know if you need anything additional. Thank you
Best regards,
Brandon Benavidez - Mechanical Engineer
Turnpack, LLC
Phone #: 1 (480) 276-2897
On Mon, Jun 22, 2026 at 6:53 AM Chris Keller <chrisk@waisales.com> wrote:
Hello all
The estimated ship date from Toyo for the ordered actuators for 19”x20” FactoryLab is 7/11.
@Mario Garcia – Cindy at Toyo will have tracking on/by July 11th.
@Christopher Berger/@Lorena Carrillo – did you place the PO for the actuators for 24”x36” FactoryRobot with MSI on Friday?
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Chris Keller
Sent: Friday, June 19, 2026 11:00 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesGood to hear on the 24” x 36”.
Totally understand the time constraint issue.
Checking on that PO placed on 6/10 and will provide delivery update by Monday.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, June 18, 2026 9:40 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesThe 24" x 36" will be finalized tomorrow. For the last two weeks we had 0 availability to work on this project and I had hoped to get the orders in before.
Can you confirm that order PO26211760, placed on 06/10 for the 21" x 19" is being processed and still expected to arrive on 07/08?
Chris
On Wed, Jun 17, 2026 at 9:13 AM Chris Keller <chrisk@waisales.com> wrote:
Thanks for the reply and update Lorena.
@'Christopher Berger' is the one to approve.
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Tuesday, June 16, 2026 6:12 PM
To: Chris Keller <chrisk@waisales.com>; 'Christopher Berger' <cberger@turnpack.com>; 'Mario Garcia' <mario.garcia@msitec.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesHi no I have not placed the PO yet. Please confirm final approval.
Thank you for your time,
Lorena Carrillo
From: Chris Keller <chrisk@waisales.com>
Sent: Tuesday, June 16, 2026 7:25 AM
To: Christopher Berger <cberger@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesGood morning Chris and team,
Have you placed the below order with Mario/MSI TEC?
With this, we should have the two XYZ systems (19x20” and 24x36” — Factory Lab and Factory Robot) covered.
I’ll check on delivery dates with Toyo today.
The remaining item is the FactoryCube XXYY. I’ll send a separate note on that shortly.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, June 10, 2026 9:28 AM
To: Mario Garcia <mario.garcia@msitec.com>
Cc: Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesMario,
we'll place the order for these stages by tomorrow:
X: GLTH12-L12-600-BL-Y40-C4P2
Price: $1,970 each + 10% Tariff
Y: GLTH8-L12-300-BR-Y20-C4P2
Price: $1,167 each+ 10% Tariff
Z: GLTH5-L6-150-BC-Y10B-C4P2
Price: $970 each + 10% Tariff
Estimated Shipping for QTY(1) each above is ~$250 total
4 week Lead Time
Chris
On Mon, Jun 8, 2026 at 4:00 PM Mario Garcia <mario.garcia@msitec.com> wrote:
Chris,
Pricing below for Actuators Only. I do also provide a ball park price on a MultiAxisSystem version. If its within budget, we can send you a formal quote and 3D file for the MultiAxis System; we need commitment from the customer of an upcoming purchase as this take some engineering time to prepare.
X: GLTH12-L12-600-BL-Y40-C4P2
Price: $1,970 each + 10% Tariff
Y: GLTH8-L12-300-BR-Y20-C4P2
Price: $1,167 each+ 10% Tariff
Z: GLTH5-L6-150-BC-Y10B-C4P2
Price: $970 each + 10% Tariff
Estimated Shipping for QTY(1) each above is ~$250 total
4 week Lead Time
Multi Axis System Price ~$5,300 + 10% Tariff + $500 Shipping 5 to 6 weeks Lead Time.
Catalog Download Ball Screw Linear Actuator - GLTH Series
MARIO GARCIA | FIELD AUTOMATION ENGINEER
MSITEC
p: 602.426.1333 | c: 480.299.4701
w: msitec.com
From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, June 8, 2026 7:21 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesChris,
for the 36"x24" Cantilever gantry the way I see this is:
X: GLTH12-L12-600-BL-Y40-C4P2Y: GLTH8-L12-300-BR-Y20-C4P2
Z: GLTH5-L6-150-BC-Y10B-C4P2
I picked Yaskawa motors but for the time being, I guess we'll buy without motors and single stages. I didn't see on the website where it would show me the specs for these stages. Can you send them to me?
Chris
On Fri, Jun 5, 2026 at 10:08 AM Chris Keller <chrisk@waisales.com> wrote:
Sounds good, please let us know if anything is unclear, we know you need this quickly, you mentioned this one is more urgent than the 19X20” Factory Lab…
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, June 4, 2026 10:59 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesChris,
We are looking at the CAD today and hopefully will have an answer EOD. We must attach the motors to these part numbers to determine the full length before making a decision.
Chris
On Thu, Jun 4, 2026 at 7:50 AM Chris Keller <chrisk@waisales.com> wrote:
Hi Chris
Please verify the open bullets today so we can complete the part number and issue correct quote
We have pricing ready and can send as soon as you confirm.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: doug@toyorobot.com <doug@toyorobot.com>
Sent: Wednesday, June 3, 2026 5:02 PM
To: Sacha Marcroft <sacham@waisales.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Mario Garcia' <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; 'Brandon Benavidez' <bbenavidez@turnpack.com>; 'Lorena Carrillo' <lcarrillo@turnpack.com>; 'TOYO TA1' <ta1@toyorobot.com>; 'Eric Zeng' <ericzeng@toyorobotics.com>; 'Doug Kiernan' <doug@toyorobotics.com>
Subject: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesChris B,
As a follow up to our meeting today.
Here are options for a 24x36 envelope cantilvered system.
Standard actuator leadtime ~3-4 weeks
Create MAS Kit +1-2 weeks.
Catalog section attached.
You can download models here – https://toyo.partcommunity.com/
GLTH12-L?-600-B?-M40-E5
Pick lead, 6, 12, 24mm
600mm stroke = 873mm (34.3”) OAL
Confirm motor position, BL/BR/BM
Confirm motor mount
GLTH8-L?-300-B?-M40-E5
Pick lead, 6, 12, 24mm
300mm stroke = 592mm (23.3”) OAL
Confirm motor position, BL/BR/BM
Confirm motor mount
GLTH5-L?-150-B?-M40-E5
Pick lead, 2, 6, 12, 20mm
Confirm motor position, BL/BR/BM – do you need parallel mount or is in-line, BC okay?
Confirm motor mount
Do you want any limit or home sensors?
Regards,
Doug KiernanTOYO Automation
415.264.9787
*Please note my new email and update your CRM: doug@toyorobotics.com
New TOYO Robotics Americas website going live soon!
From: Sacha Marcroft <sacham@waisales.com>
Sent: Friday, May 22, 2026 11:15 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>; doug@toyorobot.com; TOYO TA1 <ta1@toyorobot.com>; Eric Zeng <ericzeng@toyorobotics.com>
Subject: RE: Place holder for todays call - second system with Motors and DrivesYeah sure we discussed potentially having a traveler on X so was looking at the clearance. With traveler we don’t need the GTH12 since we are splitting the load. The Gth8 Carriage is 160mm (sorry mentioned 120mm that was incorrect) and Z is roughly 55mm wide. We can add an undriven GTH5 traveler (very smooth) traveler or profile so there is no interfere with Y and Z axis on the traveler side.
Rough concept shows profile rail but we use our actuators as travelers as well.
Sacha Marcroft
VP Motion Division
Western Automation
714-473-4883
From: Christopher Berger <cberger@turnpack.com>
Sent: Friday, May 22, 2026 10:45 AM
To: Sacha Marcroft <sacham@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>; doug@toyorobot.com; TOYO TA1 <ta1@toyorobot.com>; Eric Zeng <ericzeng@toyorobotics.com>
Subject: Re: Place holder for todays call - second system with Motors and DrivesThanks Sacha. Looking at the model and your email you are proposing a T-style gantry which we would prefer for clearance reasons but can you briefly explain what you mean by this bullet point?
- GTH8 with motor wrap and 600mm travel is 35” long. Carriage is 120mm and the Width 80mm so traveler or X’ would fit nicely below.
Thanks
Chris
On Fri, May 22, 2026 at 9:19 AM Sacha Marcroft <sacham@waisales.com> wrote:
Hey Gents,
First pass at the larger T stage. T stage Spec’s below and potential solution stages reviewed. Let me know your initial thoughts then we will move to providing a MAS quote.
Attached is the XY potential using GTH12 on x and GTH8 on Y for the 36”x 24” plate.
- XYZ Ballscrew stages for 36" x 24" baseplate without motors (we have/can get Omron Servo Motors)
- XYZ Ballscrew stages for 36" x 24" baseplate with motors
- MAS Ballscrew system for 36" x 24" with Motors
- Option: Add Linear encoder
36” long axis:
- GTH12 with motor wrap and 600mm travel is 34.4” long
- GTH12 with motor wrap and 650mm travel is 36.35” long
- GTH8 with motor wrap and 600mm travel is 35” long. Carriage is 120mm and the Width 80mm so traveler or X’ would fit nicely below.
24” axis:
- GTH8 with motor wrap and 300mm travel is 23.26” long.
6” Z axis:
- GTH5 with motor wrap and 150mm travel is 14.25” long. With motor wrap we need to consider 60mm motor mount. I am sure they have made one but need to check. The stage is 52mm wide model shows a 100w motor
Sacha Marcroft
VP Motion Division
Western Automation
714-473-4883
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, May 21, 2026 3:49 PM
To: Sacha Marcroft <sacham@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Place holder for todays call - second system with Motors and DrivesJust to summarize this one more time:
- FactoryLab
- XYZ Ballscrew stages for 20" x 19" baseplate without motors (we have/can get Omron Servo Motors) -> We are ready to order
- XYZ Ballscrew stages for 20" x 19" baseplate with motors
- MAS Ballscrew system for 20" x 19" with Motors
- Option: Add Linear encoder
- FactoryCube
- XYZ Gantry Linear stages: 400mm dual Y, 500mm X, 150mm Z
- XYZ Gantry Ballscrew stages: 400mm dual Y, 500mm X, 150mm Z
- XXYY Wafer table: ballscrew 350mm min travel for 12" wafer -> We are ready to order
- Option: Add Linear Encoder to Ballscrew stages
- FactoryRobot:
- XYZ Ballscrew stages for 36" x 24" baseplate without motors (we have/can get Omron Servo Motors)
- XYZ Ballscrew stages for 36" x 24" baseplate with motors
- MAS Ballscrew system for 36" x 24" with Motors
- Option: Add Linear encoder
What we will place orders for depends on lead time and pricing but I am interested to get lead time and pricing for all listed items.
Chris
On Thu, May 21, 2026 at 1:28 PM Sacha Marcroft <sacham@waisales.com> wrote:
Let me know if this time slot fits and if not make recommendations for another slot.
Thanks,
________________________________________________________________________________
Microsoft Teams meeting
Meeting ID: 227 243 475 332 88
Passcode: 7dg33tp2
Dial in by phone
+1 469-998-7643,,99664092# United States, Dallas
Phone conference ID: 996 640 92#
For organizers: Meeting options | Reset dial-in PIN
________________________________________________________________________________
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
CONFIDENTIALITY NOTICE: This e-mail transmission and any documents, files or previous messages attached to it may contain confidential or legally privileged information. If you are not the intended recipient, you are hereby notified that you must not read this transmission and that any disclosure, copying, printing, distribution or use of any of the information contained in or attached to this transmission is strictly prohibited. If you received this transmission in error, please immediately notify the sender by telephone or return e-mail and delete the original transmission and its attachments without reading or saving in any manner.
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
by "Chris Keller" <chrisk@waisales.com> - 10:47 - 16 Jul 2026-
RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?
Hi Team,
Regarding purchase order PO26211760, our shipment from Toyo is currently in transit to our Colorado warehouse and is expected to arrive early this week.
As soon as the shipment is received, we will work with our warehouse team to process it and get your order shipped out as quickly as possible.
Thank you for your patience.
Jayna Hanselman| Account Coordinator
MSI TEC
p: 602-426-1333
w: msitec.com
From: Turnpack LLC <info@turnpack.com>
Sent: Thursday, July 16, 2026 11:53 AM
To: 'Chris Keller' <chrisk@waisales.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: Jayna Hanselman <jaynah@msitec.com>; 'Lorena Carrillo' <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; 'Brandon Benavidez' <bbenavidez@turnpack.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Thank you for the update. Please correct our ship and bill to as we are moving this week. New bill to/ship is listed below thank you!
Lorena Carrillo
Office Manager
Office: 480-331-1878
Direct Line: 781-938-0069
NEW ADDRESS: 6922 Via Northgate Ste 101, Mesa, AZ 85212lcarrillo@turnpack.com | www.turnpack.com
https://www.turnpack.com/midas-rework/delidderFrom: Chris Keller <chrisk@waisales.com>
Sent: Thursday, July 16, 2026 7:43 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Info at Turnpack <info@turnpack.com>; Jayna Hanselman <jaynah@msitec.com>; Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Hi Chris
Correct on PO26211760 (7/23 ship date+transit)
Now confirming ship date for PO26261823.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, July 16, 2026 7:25 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Info at Turnpack <info@turnpack.com>; Jayna Hanselman <jaynah@msitec.com>; Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Chris,
Just to ensure we are all referencing the same order information:
- PO26211760: 300mm x 200mm x 100mm -> new ship date 07/23 + transit time?
- PO26261823: 600mm x 300mm x 150mm -> ship date 07/31 (using 4 week lead time estimate) + transit time?
Chris
On Thu, Jul 16, 2026 at 7:17 AM Chris Keller <chrisk@waisales.com> wrote:
All, we pinged Toyo for tracking information and have the following update this morning:
We're sorry to inform you that this shipment has been postponed to July 23 due to a shortage of the MAS-bracket and motor mount. Please rest assured we are closely following up and doing our best to have the goods ready for shipment as soon as possible.
We've let Toyo know we'd prefer to be informed upfront on delivery delays moving forward.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Chris Keller
Sent: Wednesday, July 15, 2026 8:30 AM
To: Info at Turnpack <info@turnpack.com>; Jayna Hanselman <jaynah@msitec.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Christopher Berger <cberger@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Hi Jayna
Did you receive tracking info from Toyo yet?
I just pinged Cindy and Eric at factory to send over in case you have not seen it yet.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Info at Turnpack <info@turnpack.com>
Sent: Tuesday, July 14, 2026 5:32 PM
To: Jayna Hanselman <jaynah@msitec.com>
Cc: Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Christopher Berger <cberger@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?You don't often get email from info@turnpack.com. Learn why this is important
Hello team, any update on this order?
Respectfully,
Lorena CarrilloOn Mon, Jul 6, 2026, 9:54 AM Jayna Hanselman <jaynah@msitec.com> wrote:
Thank you, Chris!
Jayna Hanselman| Account Coordinator
MSI TEC
p: 602-426-1333
w: msitec.com
From: Chris Keller <chrisk@waisales.com>
Sent: Monday, July 6, 2026 9:30 AM
To: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>; Jayna Hanselman <jaynah@msitec.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Hey guys
Hope everyone had a nice holiday weekend.
The ship date from production team was then confirmed July 16, but we have asked them to expedite the order, and they are now targeting shipment on July 10.
We will keep you posted if there any changes. Thanks.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Thursday, July 2, 2026 12:29 PM
To: 'Mario Garcia' <mario.garcia@msitec.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Hello Team please see updated ship date for these parts.
Thank you for your time,
Lorena Carrillo
From: Mario Garcia <mario.garcia@msitec.com>
Sent: Monday, June 29, 2026 6:14 PM
To: Christopher Berger <cberger@turnpack.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Chris,
These are meant to work with the 60mm frame Omron motor below; image received by Brandon last week
Omron Motor [Shaft Diameter = 11mm]:
From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, June 29, 2026 4:11 PM
To: Mario Garcia <mario.garcia@msitec.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Thanks Mario. These will also work with the Omron motors, correct?
@Lorena Carrillo If Mario confirms please proceed and place the order. I will create the project to assign this to.
Chris
On Mon, Jun 29, 2026 at 4:07 PM Mario Garcia <mario.garcia@msitec.com> wrote:
Brandon,
You can proceed with same pricing as before. After we get a Purchase order, TOYO will generate drawings for you to approve. Shipping after receipt of order is about 4 weeks.
X: GLTH12-L12-600-BL-Y40-C4P2
Price: $1,970 each + 10% Tariff
Y: GLTH8-L12-300-BL-Y20-C4P2
Price: $1,167 each+ 10% Tariff
Z: GLTH5-L6-150-BC-Y10B-C4P2
Price: $970 each + 10% Tariff
Estimated Shipping for QTY(1) each above is ~$250 total
4 week Lead Time
MARIO GARCIA | FIELD AUTOMATION ENGINEER
MSITEC
p: 602.426.1333 | c: 480.299.4701
w: msitec.com
From: Brandon Benavidez <bbenavidez@turnpack.com>
Sent: Tuesday, June 23, 2026 8:32 AM
To: Chris Keller <chrisk@waisales.com>; Mario Garcia <mario.garcia@msitec.com>
Cc: Christopher Berger <cberger@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Chris/Mario,
Yesterday, we were able to look more closely at the 24" x 36" [FactoryRobot] machine and found one small change we'd like to make. When you get a chance, please update the quote to include the following changes (including those needed for the appropriate motor mounting). Since this is just for the actuators, can you ensure they will work with our current Omron motors? The CAD I currently have for the actuators lacks the appropriate mounting. I've included the Omron motor drawing below for reference.
Actuator Part Numbers:
X: GLTH12-L12-600-BL-Y40-C4P2
Y: GLTH8-L12-300-BL-Y20-C4P2_0 [Previously was: GLTH8-L12-300-BR-Y20-C4P2_0]
Z: GLTH5-L6-150-BC-Y10B-C4P2_0
Omron Motor [Shaft Diameter = 11mm]:
Please let us know if you need anything additional. Thank you
Best regards,
Brandon Benavidez - Mechanical Engineer
Turnpack, LLC
Phone #: 1 (480) 276-2897
On Mon, Jun 22, 2026 at 6:53 AM Chris Keller <chrisk@waisales.com> wrote:
Hello all
The estimated ship date from Toyo for the ordered actuators for 19”x20” FactoryLab is 7/11.
@Mario Garcia – Cindy at Toyo will have tracking on/by July 11th.
@Christopher Berger/@Lorena Carrillo – did you place the PO for the actuators for 24”x36” FactoryRobot with MSI on Friday?
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Chris Keller
Sent: Friday, June 19, 2026 11:00 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesGood to hear on the 24” x 36”.
Totally understand the time constraint issue.
Checking on that PO placed on 6/10 and will provide delivery update by Monday.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, June 18, 2026 9:40 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesThe 24" x 36" will be finalized tomorrow. For the last two weeks we had 0 availability to work on this project and I had hoped to get the orders in before.
Can you confirm that order PO26211760, placed on 06/10 for the 21" x 19" is being processed and still expected to arrive on 07/08?
Chris
On Wed, Jun 17, 2026 at 9:13 AM Chris Keller <chrisk@waisales.com> wrote:
Thanks for the reply and update Lorena.
@'Christopher Berger' is the one to approve.
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Tuesday, June 16, 2026 6:12 PM
To: Chris Keller <chrisk@waisales.com>; 'Christopher Berger' <cberger@turnpack.com>; 'Mario Garcia' <mario.garcia@msitec.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesHi no I have not placed the PO yet. Please confirm final approval.
Thank you for your time,
Lorena Carrillo
From: Chris Keller <chrisk@waisales.com>
Sent: Tuesday, June 16, 2026 7:25 AM
To: Christopher Berger <cberger@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesGood morning Chris and team,
Have you placed the below order with Mario/MSI TEC?
With this, we should have the two XYZ systems (19x20” and 24x36” — Factory Lab and Factory Robot) covered.
I’ll check on delivery dates with Toyo today.
The remaining item is the FactoryCube XXYY. I’ll send a separate note on that shortly.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, June 10, 2026 9:28 AM
To: Mario Garcia <mario.garcia@msitec.com>
Cc: Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesMario,
we'll place the order for these stages by tomorrow:
X: GLTH12-L12-600-BL-Y40-C4P2
Price: $1,970 each + 10% Tariff
Y: GLTH8-L12-300-BR-Y20-C4P2
Price: $1,167 each+ 10% Tariff
Z: GLTH5-L6-150-BC-Y10B-C4P2
Price: $970 each + 10% Tariff
Estimated Shipping for QTY(1) each above is ~$250 total
4 week Lead Time
Chris
On Mon, Jun 8, 2026 at 4:00 PM Mario Garcia <mario.garcia@msitec.com> wrote:
Chris,
Pricing below for Actuators Only. I do also provide a ball park price on a MultiAxisSystem version. If its within budget, we can send you a formal quote and 3D file for the MultiAxis System; we need commitment from the customer of an upcoming purchase as this take some engineering time to prepare.
X: GLTH12-L12-600-BL-Y40-C4P2
Price: $1,970 each + 10% Tariff
Y: GLTH8-L12-300-BR-Y20-C4P2
Price: $1,167 each+ 10% Tariff
Z: GLTH5-L6-150-BC-Y10B-C4P2
Price: $970 each + 10% Tariff
Estimated Shipping for QTY(1) each above is ~$250 total
4 week Lead Time
Multi Axis System Price ~$5,300 + 10% Tariff + $500 Shipping 5 to 6 weeks Lead Time.
Catalog Download Ball Screw Linear Actuator - GLTH Series
MARIO GARCIA | FIELD AUTOMATION ENGINEER
MSITEC
p: 602.426.1333 | c: 480.299.4701
w: msitec.com
From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, June 8, 2026 7:21 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesChris,
for the 36"x24" Cantilever gantry the way I see this is:
X: GLTH12-L12-600-BL-Y40-C4P2Y: GLTH8-L12-300-BR-Y20-C4P2
Z: GLTH5-L6-150-BC-Y10B-C4P2
I picked Yaskawa motors but for the time being, I guess we'll buy without motors and single stages. I didn't see on the website where it would show me the specs for these stages. Can you send them to me?
Chris
On Fri, Jun 5, 2026 at 10:08 AM Chris Keller <chrisk@waisales.com> wrote:
Sounds good, please let us know if anything is unclear, we know you need this quickly, you mentioned this one is more urgent than the 19X20” Factory Lab…
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, June 4, 2026 10:59 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesChris,
We are looking at the CAD today and hopefully will have an answer EOD. We must attach the motors to these part numbers to determine the full length before making a decision.
Chris
On Thu, Jun 4, 2026 at 7:50 AM Chris Keller <chrisk@waisales.com> wrote:
Hi Chris
Please verify the open bullets today so we can complete the part number and issue correct quote
We have pricing ready and can send as soon as you confirm.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: doug@toyorobot.com <doug@toyorobot.com>
Sent: Wednesday, June 3, 2026 5:02 PM
To: Sacha Marcroft <sacham@waisales.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Mario Garcia' <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; 'Brandon Benavidez' <bbenavidez@turnpack.com>; 'Lorena Carrillo' <lcarrillo@turnpack.com>; 'TOYO TA1' <ta1@toyorobot.com>; 'Eric Zeng' <ericzeng@toyorobotics.com>; 'Doug Kiernan' <doug@toyorobotics.com>
Subject: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesChris B,
As a follow up to our meeting today.
Here are options for a 24x36 envelope cantilvered system.
Standard actuator leadtime ~3-4 weeks
Create MAS Kit +1-2 weeks.
Catalog section attached.
You can download models here – https://toyo.partcommunity.com/
GLTH12-L?-600-B?-M40-E5
Pick lead, 6, 12, 24mm
600mm stroke = 873mm (34.3”) OAL
Confirm motor position, BL/BR/BM
Confirm motor mount
GLTH8-L?-300-B?-M40-E5
Pick lead, 6, 12, 24mm
300mm stroke = 592mm (23.3”) OAL
Confirm motor position, BL/BR/BM
Confirm motor mount
GLTH5-L?-150-B?-M40-E5
Pick lead, 2, 6, 12, 20mm
Confirm motor position, BL/BR/BM – do you need parallel mount or is in-line, BC okay?
Confirm motor mount
Do you want any limit or home sensors?
Regards,
Doug KiernanTOYO Automation
415.264.9787
*Please note my new email and update your CRM: doug@toyorobotics.com
New TOYO Robotics Americas website going live soon!
From: Sacha Marcroft <sacham@waisales.com>
Sent: Friday, May 22, 2026 11:15 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>; doug@toyorobot.com; TOYO TA1 <ta1@toyorobot.com>; Eric Zeng <ericzeng@toyorobotics.com>
Subject: RE: Place holder for todays call - second system with Motors and DrivesYeah sure we discussed potentially having a traveler on X so was looking at the clearance. With traveler we don’t need the GTH12 since we are splitting the load. The Gth8 Carriage is 160mm (sorry mentioned 120mm that was incorrect) and Z is roughly 55mm wide. We can add an undriven GTH5 traveler (very smooth) traveler or profile so there is no interfere with Y and Z axis on the traveler side.
Rough concept shows profile rail but we use our actuators as travelers as well.
Sacha Marcroft
VP Motion Division
Western Automation
714-473-4883
From: Christopher Berger <cberger@turnpack.com>
Sent: Friday, May 22, 2026 10:45 AM
To: Sacha Marcroft <sacham@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>; doug@toyorobot.com; TOYO TA1 <ta1@toyorobot.com>; Eric Zeng <ericzeng@toyorobotics.com>
Subject: Re: Place holder for todays call - second system with Motors and DrivesThanks Sacha. Looking at the model and your email you are proposing a T-style gantry which we would prefer for clearance reasons but can you briefly explain what you mean by this bullet point?
- GTH8 with motor wrap and 600mm travel is 35” long. Carriage is 120mm and the Width 80mm so traveler or X’ would fit nicely below.
Thanks
Chris
On Fri, May 22, 2026 at 9:19 AM Sacha Marcroft <sacham@waisales.com> wrote:
Hey Gents,
First pass at the larger T stage. T stage Spec’s below and potential solution stages reviewed. Let me know your initial thoughts then we will move to providing a MAS quote.
Attached is the XY potential using GTH12 on x and GTH8 on Y for the 36”x 24” plate.
- XYZ Ballscrew stages for 36" x 24" baseplate without motors (we have/can get Omron Servo Motors)
- XYZ Ballscrew stages for 36" x 24" baseplate with motors
- MAS Ballscrew system for 36" x 24" with Motors
- Option: Add Linear encoder
36” long axis:
- GTH12 with motor wrap and 600mm travel is 34.4” long
- GTH12 with motor wrap and 650mm travel is 36.35” long
- GTH8 with motor wrap and 600mm travel is 35” long. Carriage is 120mm and the Width 80mm so traveler or X’ would fit nicely below.
24” axis:
- GTH8 with motor wrap and 300mm travel is 23.26” long.
6” Z axis:
- GTH5 with motor wrap and 150mm travel is 14.25” long. With motor wrap we need to consider 60mm motor mount. I am sure they have made one but need to check. The stage is 52mm wide model shows a 100w motor
Sacha Marcroft
VP Motion Division
Western Automation
714-473-4883
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, May 21, 2026 3:49 PM
To: Sacha Marcroft <sacham@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Place holder for todays call - second system with Motors and DrivesJust to summarize this one more time:
- FactoryLab
- XYZ Ballscrew stages for 20" x 19" baseplate without motors (we have/can get Omron Servo Motors) -> We are ready to order
- XYZ Ballscrew stages for 20" x 19" baseplate with motors
- MAS Ballscrew system for 20" x 19" with Motors
- Option: Add Linear encoder
- FactoryCube
- XYZ Gantry Linear stages: 400mm dual Y, 500mm X, 150mm Z
- XYZ Gantry Ballscrew stages: 400mm dual Y, 500mm X, 150mm Z
- XXYY Wafer table: ballscrew 350mm min travel for 12" wafer -> We are ready to order
- Option: Add Linear Encoder to Ballscrew stages
- FactoryRobot:
- XYZ Ballscrew stages for 36" x 24" baseplate without motors (we have/can get Omron Servo Motors)
- XYZ Ballscrew stages for 36" x 24" baseplate with motors
- MAS Ballscrew system for 36" x 24" with Motors
- Option: Add Linear encoder
What we will place orders for depends on lead time and pricing but I am interested to get lead time and pricing for all listed items.
Chris
On Thu, May 21, 2026 at 1:28 PM Sacha Marcroft <sacham@waisales.com> wrote:
Let me know if this time slot fits and if not make recommendations for another slot.
Thanks,
________________________________________________________________________________
Microsoft Teams meeting
Meeting ID: 227 243 475 332 88
Passcode: 7dg33tp2
Dial in by phone
+1 469-998-7643,,99664092# United States, Dallas
Phone conference ID: 996 640 92#
For organizers: Meeting options | Reset dial-in PIN
________________________________________________________________________________
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
CONFIDENTIALITY NOTICE: This e-mail transmission and any documents, files or previous messages attached to it may contain confidential or legally privileged information. If you are not the intended recipient, you are hereby notified that you must not read this transmission and that any disclosure, copying, printing, distribution or use of any of the information contained in or attached to this transmission is strictly prohibited. If you received this transmission in error, please immediately notify the sender by telephone or return e-mail and delete the original transmission and its attachments without reading or saving in any manner.
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
by "Jayna Hanselman" <jaynah@msitec.com> - 02:12 - 27 Jul 2026 -
RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?
Update:
For PO26261823 we got a first estimated ship date back for 8/20.
We pushed back and asked to pull this into earlier August if possible.
The part number change/finalization delayed the final production order entry to earlier this week, which is why we see the initial 8/20 date (5 weeks).
Let’s see if we can pull this in 1-2 weeks.
Do you have a deadline or urgency?
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Chris Keller
Sent: Thursday, July 16, 2026 7:43 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Info at Turnpack <info@turnpack.com>; Jayna Hanselman <jaynah@msitec.com>; Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Hi Chris
Correct on PO26211760 (7/23 ship date+transit)
Now confirming ship date for PO26261823.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, July 16, 2026 7:25 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Info at Turnpack <info@turnpack.com>; Jayna Hanselman <jaynah@msitec.com>; Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Chris,
Just to ensure we are all referencing the same order information:
- PO26211760: 300mm x 200mm x 100mm -> new ship date 07/23 + transit time?
- PO26261823: 600mm x 300mm x 150mm -> ship date 07/31 (using 4 week lead time estimate) + transit time?
Chris
On Thu, Jul 16, 2026 at 7:17 AM Chris Keller <chrisk@waisales.com> wrote:
All, we pinged Toyo for tracking information and have the following update this morning:
We're sorry to inform you that this shipment has been postponed to July 23 due to a shortage of the MAS-bracket and motor mount. Please rest assured we are closely following up and doing our best to have the goods ready for shipment as soon as possible.
We've let Toyo know we'd prefer to be informed upfront on delivery delays moving forward.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Chris Keller
Sent: Wednesday, July 15, 2026 8:30 AM
To: Info at Turnpack <info@turnpack.com>; Jayna Hanselman <jaynah@msitec.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Christopher Berger <cberger@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Hi Jayna
Did you receive tracking info from Toyo yet?
I just pinged Cindy and Eric at factory to send over in case you have not seen it yet.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Info at Turnpack <info@turnpack.com>
Sent: Tuesday, July 14, 2026 5:32 PM
To: Jayna Hanselman <jaynah@msitec.com>
Cc: Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Christopher Berger <cberger@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?You don't often get email from info@turnpack.com. Learn why this is important
Hello team, any update on this order?
Respectfully,
Lorena CarrilloOn Mon, Jul 6, 2026, 9:54 AM Jayna Hanselman <jaynah@msitec.com> wrote:
Thank you, Chris!
Jayna Hanselman| Account Coordinator
MSI TEC
p: 602-426-1333
w: msitec.com
From: Chris Keller <chrisk@waisales.com>
Sent: Monday, July 6, 2026 9:30 AM
To: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>; Jayna Hanselman <jaynah@msitec.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Hey guys
Hope everyone had a nice holiday weekend.
The ship date from production team was then confirmed July 16, but we have asked them to expedite the order, and they are now targeting shipment on July 10.
We will keep you posted if there any changes. Thanks.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Thursday, July 2, 2026 12:29 PM
To: 'Mario Garcia' <mario.garcia@msitec.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Hello Team please see updated ship date for these parts.
Thank you for your time,
Lorena Carrillo
From: Mario Garcia <mario.garcia@msitec.com>
Sent: Monday, June 29, 2026 6:14 PM
To: Christopher Berger <cberger@turnpack.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Chris,
These are meant to work with the 60mm frame Omron motor below; image received by Brandon last week
Omron Motor [Shaft Diameter = 11mm]:
From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, June 29, 2026 4:11 PM
To: Mario Garcia <mario.garcia@msitec.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Thanks Mario. These will also work with the Omron motors, correct?
@Lorena Carrillo If Mario confirms please proceed and place the order. I will create the project to assign this to.
Chris
On Mon, Jun 29, 2026 at 4:07 PM Mario Garcia <mario.garcia@msitec.com> wrote:
Brandon,
You can proceed with same pricing as before. After we get a Purchase order, TOYO will generate drawings for you to approve. Shipping after receipt of order is about 4 weeks.
X: GLTH12-L12-600-BL-Y40-C4P2
Price: $1,970 each + 10% Tariff
Y: GLTH8-L12-300-BL-Y20-C4P2
Price: $1,167 each+ 10% Tariff
Z: GLTH5-L6-150-BC-Y10B-C4P2
Price: $970 each + 10% Tariff
Estimated Shipping for QTY(1) each above is ~$250 total
4 week Lead Time
MARIO GARCIA | FIELD AUTOMATION ENGINEER
MSITEC
p: 602.426.1333 | c: 480.299.4701
w: msitec.com
From: Brandon Benavidez <bbenavidez@turnpack.com>
Sent: Tuesday, June 23, 2026 8:32 AM
To: Chris Keller <chrisk@waisales.com>; Mario Garcia <mario.garcia@msitec.com>
Cc: Christopher Berger <cberger@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Chris/Mario,
Yesterday, we were able to look more closely at the 24" x 36" [FactoryRobot] machine and found one small change we'd like to make. When you get a chance, please update the quote to include the following changes (including those needed for the appropriate motor mounting). Since this is just for the actuators, can you ensure they will work with our current Omron motors? The CAD I currently have for the actuators lacks the appropriate mounting. I've included the Omron motor drawing below for reference.
Actuator Part Numbers:
X: GLTH12-L12-600-BL-Y40-C4P2
Y: GLTH8-L12-300-BL-Y20-C4P2_0 [Previously was: GLTH8-L12-300-BR-Y20-C4P2_0]
Z: GLTH5-L6-150-BC-Y10B-C4P2_0
Omron Motor [Shaft Diameter = 11mm]:
Please let us know if you need anything additional. Thank you
Best regards,
Brandon Benavidez - Mechanical Engineer
Turnpack, LLC
Phone #: 1 (480) 276-2897
On Mon, Jun 22, 2026 at 6:53 AM Chris Keller <chrisk@waisales.com> wrote:
Hello all
The estimated ship date from Toyo for the ordered actuators for 19”x20” FactoryLab is 7/11.
@Mario Garcia – Cindy at Toyo will have tracking on/by July 11th.
@Christopher Berger/@Lorena Carrillo – did you place the PO for the actuators for 24”x36” FactoryRobot with MSI on Friday?
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Chris Keller
Sent: Friday, June 19, 2026 11:00 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesGood to hear on the 24” x 36”.
Totally understand the time constraint issue.
Checking on that PO placed on 6/10 and will provide delivery update by Monday.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, June 18, 2026 9:40 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesThe 24" x 36" will be finalized tomorrow. For the last two weeks we had 0 availability to work on this project and I had hoped to get the orders in before.
Can you confirm that order PO26211760, placed on 06/10 for the 21" x 19" is being processed and still expected to arrive on 07/08?
Chris
On Wed, Jun 17, 2026 at 9:13 AM Chris Keller <chrisk@waisales.com> wrote:
Thanks for the reply and update Lorena.
@'Christopher Berger' is the one to approve.
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Tuesday, June 16, 2026 6:12 PM
To: Chris Keller <chrisk@waisales.com>; 'Christopher Berger' <cberger@turnpack.com>; 'Mario Garcia' <mario.garcia@msitec.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesHi no I have not placed the PO yet. Please confirm final approval.
Thank you for your time,
Lorena Carrillo
From: Chris Keller <chrisk@waisales.com>
Sent: Tuesday, June 16, 2026 7:25 AM
To: Christopher Berger <cberger@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesGood morning Chris and team,
Have you placed the below order with Mario/MSI TEC?
With this, we should have the two XYZ systems (19x20” and 24x36” — Factory Lab and Factory Robot) covered.
I’ll check on delivery dates with Toyo today.
The remaining item is the FactoryCube XXYY. I’ll send a separate note on that shortly.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, June 10, 2026 9:28 AM
To: Mario Garcia <mario.garcia@msitec.com>
Cc: Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesMario,
we'll place the order for these stages by tomorrow:
X: GLTH12-L12-600-BL-Y40-C4P2
Price: $1,970 each + 10% Tariff
Y: GLTH8-L12-300-BR-Y20-C4P2
Price: $1,167 each+ 10% Tariff
Z: GLTH5-L6-150-BC-Y10B-C4P2
Price: $970 each + 10% Tariff
Estimated Shipping for QTY(1) each above is ~$250 total
4 week Lead Time
Chris
On Mon, Jun 8, 2026 at 4:00 PM Mario Garcia <mario.garcia@msitec.com> wrote:
Chris,
Pricing below for Actuators Only. I do also provide a ball park price on a MultiAxisSystem version. If its within budget, we can send you a formal quote and 3D file for the MultiAxis System; we need commitment from the customer of an upcoming purchase as this take some engineering time to prepare.
X: GLTH12-L12-600-BL-Y40-C4P2
Price: $1,970 each + 10% Tariff
Y: GLTH8-L12-300-BR-Y20-C4P2
Price: $1,167 each+ 10% Tariff
Z: GLTH5-L6-150-BC-Y10B-C4P2
Price: $970 each + 10% Tariff
Estimated Shipping for QTY(1) each above is ~$250 total
4 week Lead Time
Multi Axis System Price ~$5,300 + 10% Tariff + $500 Shipping 5 to 6 weeks Lead Time.
Catalog Download Ball Screw Linear Actuator - GLTH Series
MARIO GARCIA | FIELD AUTOMATION ENGINEER
MSITEC
p: 602.426.1333 | c: 480.299.4701
w: msitec.com
From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, June 8, 2026 7:21 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesChris,
for the 36"x24" Cantilever gantry the way I see this is:
X: GLTH12-L12-600-BL-Y40-C4P2Y: GLTH8-L12-300-BR-Y20-C4P2
Z: GLTH5-L6-150-BC-Y10B-C4P2
I picked Yaskawa motors but for the time being, I guess we'll buy without motors and single stages. I didn't see on the website where it would show me the specs for these stages. Can you send them to me?
Chris
On Fri, Jun 5, 2026 at 10:08 AM Chris Keller <chrisk@waisales.com> wrote:
Sounds good, please let us know if anything is unclear, we know you need this quickly, you mentioned this one is more urgent than the 19X20” Factory Lab…
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, June 4, 2026 10:59 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesChris,
We are looking at the CAD today and hopefully will have an answer EOD. We must attach the motors to these part numbers to determine the full length before making a decision.
Chris
On Thu, Jun 4, 2026 at 7:50 AM Chris Keller <chrisk@waisales.com> wrote:
Hi Chris
Please verify the open bullets today so we can complete the part number and issue correct quote
We have pricing ready and can send as soon as you confirm.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: doug@toyorobot.com <doug@toyorobot.com>
Sent: Wednesday, June 3, 2026 5:02 PM
To: Sacha Marcroft <sacham@waisales.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Mario Garcia' <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; 'Brandon Benavidez' <bbenavidez@turnpack.com>; 'Lorena Carrillo' <lcarrillo@turnpack.com>; 'TOYO TA1' <ta1@toyorobot.com>; 'Eric Zeng' <ericzeng@toyorobotics.com>; 'Doug Kiernan' <doug@toyorobotics.com>
Subject: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesChris B,
As a follow up to our meeting today.
Here are options for a 24x36 envelope cantilvered system.
Standard actuator leadtime ~3-4 weeks
Create MAS Kit +1-2 weeks.
Catalog section attached.
You can download models here – https://toyo.partcommunity.com/
GLTH12-L?-600-B?-M40-E5
Pick lead, 6, 12, 24mm
600mm stroke = 873mm (34.3”) OAL
Confirm motor position, BL/BR/BM
Confirm motor mount
GLTH8-L?-300-B?-M40-E5
Pick lead, 6, 12, 24mm
300mm stroke = 592mm (23.3”) OAL
Confirm motor position, BL/BR/BM
Confirm motor mount
GLTH5-L?-150-B?-M40-E5
Pick lead, 2, 6, 12, 20mm
Confirm motor position, BL/BR/BM – do you need parallel mount or is in-line, BC okay?
Confirm motor mount
Do you want any limit or home sensors?
Regards,
Doug KiernanTOYO Automation
415.264.9787
*Please note my new email and update your CRM: doug@toyorobotics.com
New TOYO Robotics Americas website going live soon!
From: Sacha Marcroft <sacham@waisales.com>
Sent: Friday, May 22, 2026 11:15 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>; doug@toyorobot.com; TOYO TA1 <ta1@toyorobot.com>; Eric Zeng <ericzeng@toyorobotics.com>
Subject: RE: Place holder for todays call - second system with Motors and DrivesYeah sure we discussed potentially having a traveler on X so was looking at the clearance. With traveler we don’t need the GTH12 since we are splitting the load. The Gth8 Carriage is 160mm (sorry mentioned 120mm that was incorrect) and Z is roughly 55mm wide. We can add an undriven GTH5 traveler (very smooth) traveler or profile so there is no interfere with Y and Z axis on the traveler side.
Rough concept shows profile rail but we use our actuators as travelers as well.
Sacha Marcroft
VP Motion Division
Western Automation
714-473-4883
From: Christopher Berger <cberger@turnpack.com>
Sent: Friday, May 22, 2026 10:45 AM
To: Sacha Marcroft <sacham@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>; doug@toyorobot.com; TOYO TA1 <ta1@toyorobot.com>; Eric Zeng <ericzeng@toyorobotics.com>
Subject: Re: Place holder for todays call - second system with Motors and DrivesThanks Sacha. Looking at the model and your email you are proposing a T-style gantry which we would prefer for clearance reasons but can you briefly explain what you mean by this bullet point?
- GTH8 with motor wrap and 600mm travel is 35” long. Carriage is 120mm and the Width 80mm so traveler or X’ would fit nicely below.
Thanks
Chris
On Fri, May 22, 2026 at 9:19 AM Sacha Marcroft <sacham@waisales.com> wrote:
Hey Gents,
First pass at the larger T stage. T stage Spec’s below and potential solution stages reviewed. Let me know your initial thoughts then we will move to providing a MAS quote.
Attached is the XY potential using GTH12 on x and GTH8 on Y for the 36”x 24” plate.
- XYZ Ballscrew stages for 36" x 24" baseplate without motors (we have/can get Omron Servo Motors)
- XYZ Ballscrew stages for 36" x 24" baseplate with motors
- MAS Ballscrew system for 36" x 24" with Motors
- Option: Add Linear encoder
36” long axis:
- GTH12 with motor wrap and 600mm travel is 34.4” long
- GTH12 with motor wrap and 650mm travel is 36.35” long
- GTH8 with motor wrap and 600mm travel is 35” long. Carriage is 120mm and the Width 80mm so traveler or X’ would fit nicely below.
24” axis:
- GTH8 with motor wrap and 300mm travel is 23.26” long.
6” Z axis:
- GTH5 with motor wrap and 150mm travel is 14.25” long. With motor wrap we need to consider 60mm motor mount. I am sure they have made one but need to check. The stage is 52mm wide model shows a 100w motor
Sacha Marcroft
VP Motion Division
Western Automation
714-473-4883
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, May 21, 2026 3:49 PM
To: Sacha Marcroft <sacham@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Place holder for todays call - second system with Motors and DrivesJust to summarize this one more time:
- FactoryLab
- XYZ Ballscrew stages for 20" x 19" baseplate without motors (we have/can get Omron Servo Motors) -> We are ready to order
- XYZ Ballscrew stages for 20" x 19" baseplate with motors
- MAS Ballscrew system for 20" x 19" with Motors
- Option: Add Linear encoder
- FactoryCube
- XYZ Gantry Linear stages: 400mm dual Y, 500mm X, 150mm Z
- XYZ Gantry Ballscrew stages: 400mm dual Y, 500mm X, 150mm Z
- XXYY Wafer table: ballscrew 350mm min travel for 12" wafer -> We are ready to order
- Option: Add Linear Encoder to Ballscrew stages
- FactoryRobot:
- XYZ Ballscrew stages for 36" x 24" baseplate without motors (we have/can get Omron Servo Motors)
- XYZ Ballscrew stages for 36" x 24" baseplate with motors
- MAS Ballscrew system for 36" x 24" with Motors
- Option: Add Linear encoder
What we will place orders for depends on lead time and pricing but I am interested to get lead time and pricing for all listed items.
Chris
On Thu, May 21, 2026 at 1:28 PM Sacha Marcroft <sacham@waisales.com> wrote:
Let me know if this time slot fits and if not make recommendations for another slot.
Thanks,
________________________________________________________________________________
Microsoft Teams meeting
Meeting ID: 227 243 475 332 88
Passcode: 7dg33tp2
Dial in by phone
+1 469-998-7643,,99664092# United States, Dallas
Phone conference ID: 996 640 92#
For organizers: Meeting options | Reset dial-in PIN
________________________________________________________________________________
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
CONFIDENTIALITY NOTICE: This e-mail transmission and any documents, files or previous messages attached to it may contain confidential or legally privileged information. If you are not the intended recipient, you are hereby notified that you must not read this transmission and that any disclosure, copying, printing, distribution or use of any of the information contained in or attached to this transmission is strictly prohibited. If you received this transmission in error, please immediately notify the sender by telephone or return e-mail and delete the original transmission and its attachments without reading or saving in any manner.
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
by "Chris Keller" <chrisk@waisales.com> - 03:16 - 17 Jul 2026-
Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?
Hi Chris,Yes the deadline is the lead time we were given when we placed the order. I am not sure why the part number needed to change since our requirements didn't change and we ordered what we were quoted for. By when will you know the actual ship date?ChrisOn Fri, Jul 17, 2026 at 12:12 PM Chris Keller <chrisk@waisales.com> wrote:Update:
For PO26261823 we got a first estimated ship date back for 8/20.
We pushed back and asked to pull this into earlier August if possible.
The part number change/finalization delayed the final production order entry to earlier this week, which is why we see the initial 8/20 date (5 weeks).
Let’s see if we can pull this in 1-2 weeks.
Do you have a deadline or urgency?
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Chris Keller
Sent: Thursday, July 16, 2026 7:43 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Info at Turnpack <info@turnpack.com>; Jayna Hanselman <jaynah@msitec.com>; Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Hi Chris
Correct on PO26211760 (7/23 ship date+transit)
Now confirming ship date for PO26261823.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, July 16, 2026 7:25 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Info at Turnpack <info@turnpack.com>; Jayna Hanselman <jaynah@msitec.com>; Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Chris,
Just to ensure we are all referencing the same order information:
- PO26211760: 300mm x 200mm x 100mm -> new ship date 07/23 + transit time?
- PO26261823: 600mm x 300mm x 150mm -> ship date 07/31 (using 4 week lead time estimate) + transit time?
Chris
On Thu, Jul 16, 2026 at 7:17 AM Chris Keller <chrisk@waisales.com> wrote:
All, we pinged Toyo for tracking information and have the following update this morning:
We're sorry to inform you that this shipment has been postponed to July 23 due to a shortage of the MAS-bracket and motor mount. Please rest assured we are closely following up and doing our best to have the goods ready for shipment as soon as possible.
We've let Toyo know we'd prefer to be informed upfront on delivery delays moving forward.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Chris Keller
Sent: Wednesday, July 15, 2026 8:30 AM
To: Info at Turnpack <info@turnpack.com>; Jayna Hanselman <jaynah@msitec.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Christopher Berger <cberger@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Hi Jayna
Did you receive tracking info from Toyo yet?
I just pinged Cindy and Eric at factory to send over in case you have not seen it yet.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Info at Turnpack <info@turnpack.com>
Sent: Tuesday, July 14, 2026 5:32 PM
To: Jayna Hanselman <jaynah@msitec.com>
Cc: Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Christopher Berger <cberger@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?You don't often get email from info@turnpack.com. Learn why this is important
Hello team, any update on this order?
Respectfully,
Lorena CarrilloOn Mon, Jul 6, 2026, 9:54 AM Jayna Hanselman <jaynah@msitec.com> wrote:
Thank you, Chris!
Jayna Hanselman| Account Coordinator
MSI TEC
p: 602-426-1333
w: msitec.com
From: Chris Keller <chrisk@waisales.com>
Sent: Monday, July 6, 2026 9:30 AM
To: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>; Jayna Hanselman <jaynah@msitec.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Hey guys
Hope everyone had a nice holiday weekend.
The ship date from production team was then confirmed July 16, but we have asked them to expedite the order, and they are now targeting shipment on July 10.
We will keep you posted if there any changes. Thanks.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Thursday, July 2, 2026 12:29 PM
To: 'Mario Garcia' <mario.garcia@msitec.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Hello Team please see updated ship date for these parts.
Thank you for your time,
Lorena Carrillo
From: Mario Garcia <mario.garcia@msitec.com>
Sent: Monday, June 29, 2026 6:14 PM
To: Christopher Berger <cberger@turnpack.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Chris,
These are meant to work with the 60mm frame Omron motor below; image received by Brandon last week
Omron Motor [Shaft Diameter = 11mm]:
From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, June 29, 2026 4:11 PM
To: Mario Garcia <mario.garcia@msitec.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Thanks Mario. These will also work with the Omron motors, correct?
@Lorena Carrillo If Mario confirms please proceed and place the order. I will create the project to assign this to.
Chris
On Mon, Jun 29, 2026 at 4:07 PM Mario Garcia <mario.garcia@msitec.com> wrote:
Brandon,
You can proceed with same pricing as before. After we get a Purchase order, TOYO will generate drawings for you to approve. Shipping after receipt of order is about 4 weeks.
X: GLTH12-L12-600-BL-Y40-C4P2
Price: $1,970 each + 10% Tariff
Y: GLTH8-L12-300-BL-Y20-C4P2
Price: $1,167 each+ 10% Tariff
Z: GLTH5-L6-150-BC-Y10B-C4P2
Price: $970 each + 10% Tariff
Estimated Shipping for QTY(1) each above is ~$250 total
4 week Lead Time
MARIO GARCIA | FIELD AUTOMATION ENGINEER
MSITEC
p: 602.426.1333 | c: 480.299.4701
w: msitec.com
From: Brandon Benavidez <bbenavidez@turnpack.com>
Sent: Tuesday, June 23, 2026 8:32 AM
To: Chris Keller <chrisk@waisales.com>; Mario Garcia <mario.garcia@msitec.com>
Cc: Christopher Berger <cberger@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Chris/Mario,
Yesterday, we were able to look more closely at the 24" x 36" [FactoryRobot] machine and found one small change we'd like to make. When you get a chance, please update the quote to include the following changes (including those needed for the appropriate motor mounting). Since this is just for the actuators, can you ensure they will work with our current Omron motors? The CAD I currently have for the actuators lacks the appropriate mounting. I've included the Omron motor drawing below for reference.
Actuator Part Numbers:
X: GLTH12-L12-600-BL-Y40-C4P2
Y: GLTH8-L12-300-BL-Y20-C4P2_0 [Previously was: GLTH8-L12-300-BR-Y20-C4P2_0]
Z: GLTH5-L6-150-BC-Y10B-C4P2_0
Omron Motor [Shaft Diameter = 11mm]:
Please let us know if you need anything additional. Thank you
Best regards,
Brandon Benavidez - Mechanical Engineer
Turnpack, LLC
Phone #: 1 (480) 276-2897
On Mon, Jun 22, 2026 at 6:53 AM Chris Keller <chrisk@waisales.com> wrote:
Hello all
The estimated ship date from Toyo for the ordered actuators for 19”x20” FactoryLab is 7/11.
@Mario Garcia – Cindy at Toyo will have tracking on/by July 11th.
@Christopher Berger/@Lorena Carrillo – did you place the PO for the actuators for 24”x36” FactoryRobot with MSI on Friday?
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Chris Keller
Sent: Friday, June 19, 2026 11:00 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesGood to hear on the 24” x 36”.
Totally understand the time constraint issue.
Checking on that PO placed on 6/10 and will provide delivery update by Monday.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, June 18, 2026 9:40 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesThe 24" x 36" will be finalized tomorrow. For the last two weeks we had 0 availability to work on this project and I had hoped to get the orders in before.
Can you confirm that order PO26211760, placed on 06/10 for the 21" x 19" is being processed and still expected to arrive on 07/08?
Chris
On Wed, Jun 17, 2026 at 9:13 AM Chris Keller <chrisk@waisales.com> wrote:
Thanks for the reply and update Lorena.
@'Christopher Berger' is the one to approve.
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Tuesday, June 16, 2026 6:12 PM
To: Chris Keller <chrisk@waisales.com>; 'Christopher Berger' <cberger@turnpack.com>; 'Mario Garcia' <mario.garcia@msitec.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesHi no I have not placed the PO yet. Please confirm final approval.
Thank you for your time,
Lorena Carrillo
From: Chris Keller <chrisk@waisales.com>
Sent: Tuesday, June 16, 2026 7:25 AM
To: Christopher Berger <cberger@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesGood morning Chris and team,
Have you placed the below order with Mario/MSI TEC?
With this, we should have the two XYZ systems (19x20” and 24x36” — Factory Lab and Factory Robot) covered.
I’ll check on delivery dates with Toyo today.
The remaining item is the FactoryCube XXYY. I’ll send a separate note on that shortly.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, June 10, 2026 9:28 AM
To: Mario Garcia <mario.garcia@msitec.com>
Cc: Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesMario,
we'll place the order for these stages by tomorrow:
X: GLTH12-L12-600-BL-Y40-C4P2
Price: $1,970 each + 10% Tariff
Y: GLTH8-L12-300-BR-Y20-C4P2
Price: $1,167 each+ 10% Tariff
Z: GLTH5-L6-150-BC-Y10B-C4P2
Price: $970 each + 10% Tariff
Estimated Shipping for QTY(1) each above is ~$250 total
4 week Lead Time
Chris
On Mon, Jun 8, 2026 at 4:00 PM Mario Garcia <mario.garcia@msitec.com> wrote:
Chris,
Pricing below for Actuators Only. I do also provide a ball park price on a MultiAxisSystem version. If its within budget, we can send you a formal quote and 3D file for the MultiAxis System; we need commitment from the customer of an upcoming purchase as this take some engineering time to prepare.
X: GLTH12-L12-600-BL-Y40-C4P2
Price: $1,970 each + 10% Tariff
Y: GLTH8-L12-300-BR-Y20-C4P2
Price: $1,167 each+ 10% Tariff
Z: GLTH5-L6-150-BC-Y10B-C4P2
Price: $970 each + 10% Tariff
Estimated Shipping for QTY(1) each above is ~$250 total
4 week Lead Time
Multi Axis System Price ~$5,300 + 10% Tariff + $500 Shipping 5 to 6 weeks Lead Time.
Catalog Download Ball Screw Linear Actuator - GLTH Series
MARIO GARCIA | FIELD AUTOMATION ENGINEER
MSITEC
p: 602.426.1333 | c: 480.299.4701
w: msitec.com
From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, June 8, 2026 7:21 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesChris,
for the 36"x24" Cantilever gantry the way I see this is:
X: GLTH12-L12-600-BL-Y40-C4P2Y: GLTH8-L12-300-BR-Y20-C4P2
Z: GLTH5-L6-150-BC-Y10B-C4P2
I picked Yaskawa motors but for the time being, I guess we'll buy without motors and single stages. I didn't see on the website where it would show me the specs for these stages. Can you send them to me?
Chris
On Fri, Jun 5, 2026 at 10:08 AM Chris Keller <chrisk@waisales.com> wrote:
Sounds good, please let us know if anything is unclear, we know you need this quickly, you mentioned this one is more urgent than the 19X20” Factory Lab…
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, June 4, 2026 10:59 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesChris,
We are looking at the CAD today and hopefully will have an answer EOD. We must attach the motors to these part numbers to determine the full length before making a decision.
Chris
On Thu, Jun 4, 2026 at 7:50 AM Chris Keller <chrisk@waisales.com> wrote:
Hi Chris
Please verify the open bullets today so we can complete the part number and issue correct quote
We have pricing ready and can send as soon as you confirm.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: doug@toyorobot.com <doug@toyorobot.com>
Sent: Wednesday, June 3, 2026 5:02 PM
To: Sacha Marcroft <sacham@waisales.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Mario Garcia' <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; 'Brandon Benavidez' <bbenavidez@turnpack.com>; 'Lorena Carrillo' <lcarrillo@turnpack.com>; 'TOYO TA1' <ta1@toyorobot.com>; 'Eric Zeng' <ericzeng@toyorobotics.com>; 'Doug Kiernan' <doug@toyorobotics.com>
Subject: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesChris B,
As a follow up to our meeting today.
Here are options for a 24x36 envelope cantilvered system.
Standard actuator leadtime ~3-4 weeks
Create MAS Kit +1-2 weeks.
Catalog section attached.
You can download models here – https://toyo.partcommunity.com/
GLTH12-L?-600-B?-M40-E5
Pick lead, 6, 12, 24mm
600mm stroke = 873mm (34.3”) OAL
Confirm motor position, BL/BR/BM
Confirm motor mount
GLTH8-L?-300-B?-M40-E5
Pick lead, 6, 12, 24mm
300mm stroke = 592mm (23.3”) OAL
Confirm motor position, BL/BR/BM
Confirm motor mount
GLTH5-L?-150-B?-M40-E5
Pick lead, 2, 6, 12, 20mm
Confirm motor position, BL/BR/BM – do you need parallel mount or is in-line, BC okay?
Confirm motor mount
Do you want any limit or home sensors?
Regards,
Doug KiernanTOYO Automation
415.264.9787
*Please note my new email and update your CRM: doug@toyorobotics.com
New TOYO Robotics Americas website going live soon!
From: Sacha Marcroft <sacham@waisales.com>
Sent: Friday, May 22, 2026 11:15 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>; doug@toyorobot.com; TOYO TA1 <ta1@toyorobot.com>; Eric Zeng <ericzeng@toyorobotics.com>
Subject: RE: Place holder for todays call - second system with Motors and DrivesYeah sure we discussed potentially having a traveler on X so was looking at the clearance. With traveler we don’t need the GTH12 since we are splitting the load. The Gth8 Carriage is 160mm (sorry mentioned 120mm that was incorrect) and Z is roughly 55mm wide. We can add an undriven GTH5 traveler (very smooth) traveler or profile so there is no interfere with Y and Z axis on the traveler side.
Rough concept shows profile rail but we use our actuators as travelers as well.
Sacha Marcroft
VP Motion Division
Western Automation
714-473-4883
From: Christopher Berger <cberger@turnpack.com>
Sent: Friday, May 22, 2026 10:45 AM
To: Sacha Marcroft <sacham@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>; doug@toyorobot.com; TOYO TA1 <ta1@toyorobot.com>; Eric Zeng <ericzeng@toyorobotics.com>
Subject: Re: Place holder for todays call - second system with Motors and DrivesThanks Sacha. Looking at the model and your email you are proposing a T-style gantry which we would prefer for clearance reasons but can you briefly explain what you mean by this bullet point?
- GTH8 with motor wrap and 600mm travel is 35” long. Carriage is 120mm and the Width 80mm so traveler or X’ would fit nicely below.
Thanks
Chris
On Fri, May 22, 2026 at 9:19 AM Sacha Marcroft <sacham@waisales.com> wrote:
Hey Gents,
First pass at the larger T stage. T stage Spec’s below and potential solution stages reviewed. Let me know your initial thoughts then we will move to providing a MAS quote.
Attached is the XY potential using GTH12 on x and GTH8 on Y for the 36”x 24” plate.
- XYZ Ballscrew stages for 36" x 24" baseplate without motors (we have/can get Omron Servo Motors)
- XYZ Ballscrew stages for 36" x 24" baseplate with motors
- MAS Ballscrew system for 36" x 24" with Motors
- Option: Add Linear encoder
36” long axis:
- GTH12 with motor wrap and 600mm travel is 34.4” long
- GTH12 with motor wrap and 650mm travel is 36.35” long
- GTH8 with motor wrap and 600mm travel is 35” long. Carriage is 120mm and the Width 80mm so traveler or X’ would fit nicely below.
24” axis:
- GTH8 with motor wrap and 300mm travel is 23.26” long.
6” Z axis:
- GTH5 with motor wrap and 150mm travel is 14.25” long. With motor wrap we need to consider 60mm motor mount. I am sure they have made one but need to check. The stage is 52mm wide model shows a 100w motor
Sacha Marcroft
VP Motion Division
Western Automation
714-473-4883
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, May 21, 2026 3:49 PM
To: Sacha Marcroft <sacham@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Place holder for todays call - second system with Motors and DrivesJust to summarize this one more time:
- FactoryLab
- XYZ Ballscrew stages for 20" x 19" baseplate without motors (we have/can get Omron Servo Motors) -> We are ready to order
- XYZ Ballscrew stages for 20" x 19" baseplate with motors
- MAS Ballscrew system for 20" x 19" with Motors
- Option: Add Linear encoder
- FactoryCube
- XYZ Gantry Linear stages: 400mm dual Y, 500mm X, 150mm Z
- XYZ Gantry Ballscrew stages: 400mm dual Y, 500mm X, 150mm Z
- XXYY Wafer table: ballscrew 350mm min travel for 12" wafer -> We are ready to order
- Option: Add Linear Encoder to Ballscrew stages
- FactoryRobot:
- XYZ Ballscrew stages for 36" x 24" baseplate without motors (we have/can get Omron Servo Motors)
- XYZ Ballscrew stages for 36" x 24" baseplate with motors
- MAS Ballscrew system for 36" x 24" with Motors
- Option: Add Linear encoder
What we will place orders for depends on lead time and pricing but I am interested to get lead time and pricing for all listed items.
Chris
On Thu, May 21, 2026 at 1:28 PM Sacha Marcroft <sacham@waisales.com> wrote:
Let me know if this time slot fits and if not make recommendations for another slot.
Thanks,
________________________________________________________________________________
Microsoft Teams meeting
Meeting ID: 227 243 475 332 88
Passcode: 7dg33tp2
Dial in by phone
+1 469-998-7643,,99664092# United States, Dallas
Phone conference ID: 996 640 92#
For organizers: Meeting options | Reset dial-in PIN
________________________________________________________________________________
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
CONFIDENTIALITY NOTICE: This e-mail transmission and any documents, files or previous messages attached to it may contain confidential or legally privileged information. If you are not the intended recipient, you are hereby notified that you must not read this transmission and that any disclosure, copying, printing, distribution or use of any of the information contained in or attached to this transmission is strictly prohibited. If you received this transmission in error, please immediately notify the sender by telephone or return e-mail and delete the original transmission and its attachments without reading or saving in any manner.
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--Christopher Berger
by Chris Berger - 05:01 - 17 Jul 2026-
RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?
Hello Chris and Team Turnpack
We’ve asked Toyo production team to expedite, and the updated estimated ship date is Aug 7.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Friday, July 17, 2026 1:59 PM
To: Chris Keller <chrisk@waisales.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Info at Turnpack <info@turnpack.com>; Jayna Hanselman <jaynah@msitec.com>; Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Hi Chris,
Yes the deadline is the lead time we were given when we placed the order. I am not sure why the part number needed to change since our requirements didn't change and we ordered what we were quoted for. By when will you know the actual ship date?
Chris
On Fri, Jul 17, 2026 at 12:12 PM Chris Keller <chrisk@waisales.com> wrote:
Update:
For PO26261823 we got a first estimated ship date back for 8/20.
We pushed back and asked to pull this into earlier August if possible.
The part number change/finalization delayed the final production order entry to earlier this week, which is why we see the initial 8/20 date (5 weeks).
Let’s see if we can pull this in 1-2 weeks.
Do you have a deadline or urgency?
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Chris Keller
Sent: Thursday, July 16, 2026 7:43 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Info at Turnpack <info@turnpack.com>; Jayna Hanselman <jaynah@msitec.com>; Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Hi Chris
Correct on PO26211760 (7/23 ship date+transit)
Now confirming ship date for PO26261823.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, July 16, 2026 7:25 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Info at Turnpack <info@turnpack.com>; Jayna Hanselman <jaynah@msitec.com>; Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Chris,
Just to ensure we are all referencing the same order information:
- PO26211760: 300mm x 200mm x 100mm -> new ship date 07/23 + transit time?
- PO26261823: 600mm x 300mm x 150mm -> ship date 07/31 (using 4 week lead time estimate) + transit time?
Chris
On Thu, Jul 16, 2026 at 7:17 AM Chris Keller <chrisk@waisales.com> wrote:
All, we pinged Toyo for tracking information and have the following update this morning:
We're sorry to inform you that this shipment has been postponed to July 23 due to a shortage of the MAS-bracket and motor mount. Please rest assured we are closely following up and doing our best to have the goods ready for shipment as soon as possible.
We've let Toyo know we'd prefer to be informed upfront on delivery delays moving forward.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Chris Keller
Sent: Wednesday, July 15, 2026 8:30 AM
To: Info at Turnpack <info@turnpack.com>; Jayna Hanselman <jaynah@msitec.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Christopher Berger <cberger@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Hi Jayna
Did you receive tracking info from Toyo yet?
I just pinged Cindy and Eric at factory to send over in case you have not seen it yet.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Info at Turnpack <info@turnpack.com>
Sent: Tuesday, July 14, 2026 5:32 PM
To: Jayna Hanselman <jaynah@msitec.com>
Cc: Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Christopher Berger <cberger@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?You don't often get email from info@turnpack.com. Learn why this is important
Hello team, any update on this order?
Respectfully,
Lorena CarrilloOn Mon, Jul 6, 2026, 9:54 AM Jayna Hanselman <jaynah@msitec.com> wrote:
Thank you, Chris!
Jayna Hanselman| Account Coordinator
MSI TEC
p: 602-426-1333
w: msitec.com
From: Chris Keller <chrisk@waisales.com>
Sent: Monday, July 6, 2026 9:30 AM
To: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>; Jayna Hanselman <jaynah@msitec.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Hey guys
Hope everyone had a nice holiday weekend.
The ship date from production team was then confirmed July 16, but we have asked them to expedite the order, and they are now targeting shipment on July 10.
We will keep you posted if there any changes. Thanks.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Thursday, July 2, 2026 12:29 PM
To: 'Mario Garcia' <mario.garcia@msitec.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Hello Team please see updated ship date for these parts.
Thank you for your time,
Lorena Carrillo
From: Mario Garcia <mario.garcia@msitec.com>
Sent: Monday, June 29, 2026 6:14 PM
To: Christopher Berger <cberger@turnpack.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Chris,
These are meant to work with the 60mm frame Omron motor below; image received by Brandon last week
Omron Motor [Shaft Diameter = 11mm]:
From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, June 29, 2026 4:11 PM
To: Mario Garcia <mario.garcia@msitec.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Thanks Mario. These will also work with the Omron motors, correct?
@Lorena Carrillo If Mario confirms please proceed and place the order. I will create the project to assign this to.
Chris
On Mon, Jun 29, 2026 at 4:07 PM Mario Garcia <mario.garcia@msitec.com> wrote:
Brandon,
You can proceed with same pricing as before. After we get a Purchase order, TOYO will generate drawings for you to approve. Shipping after receipt of order is about 4 weeks.
X: GLTH12-L12-600-BL-Y40-C4P2
Price: $1,970 each + 10% Tariff
Y: GLTH8-L12-300-BL-Y20-C4P2
Price: $1,167 each+ 10% Tariff
Z: GLTH5-L6-150-BC-Y10B-C4P2
Price: $970 each + 10% Tariff
Estimated Shipping for QTY(1) each above is ~$250 total
4 week Lead Time
MARIO GARCIA | FIELD AUTOMATION ENGINEER
MSITEC
p: 602.426.1333 | c: 480.299.4701
w: msitec.com
From: Brandon Benavidez <bbenavidez@turnpack.com>
Sent: Tuesday, June 23, 2026 8:32 AM
To: Chris Keller <chrisk@waisales.com>; Mario Garcia <mario.garcia@msitec.com>
Cc: Christopher Berger <cberger@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Chris/Mario,
Yesterday, we were able to look more closely at the 24" x 36" [FactoryRobot] machine and found one small change we'd like to make. When you get a chance, please update the quote to include the following changes (including those needed for the appropriate motor mounting). Since this is just for the actuators, can you ensure they will work with our current Omron motors? The CAD I currently have for the actuators lacks the appropriate mounting. I've included the Omron motor drawing below for reference.
Actuator Part Numbers:
X: GLTH12-L12-600-BL-Y40-C4P2
Y: GLTH8-L12-300-BL-Y20-C4P2_0 [Previously was: GLTH8-L12-300-BR-Y20-C4P2_0]
Z: GLTH5-L6-150-BC-Y10B-C4P2_0
Omron Motor [Shaft Diameter = 11mm]:
Please let us know if you need anything additional. Thank you
Best regards,
Brandon Benavidez - Mechanical Engineer
Turnpack, LLC
Phone #: 1 (480) 276-2897
On Mon, Jun 22, 2026 at 6:53 AM Chris Keller <chrisk@waisales.com> wrote:
Hello all
The estimated ship date from Toyo for the ordered actuators for 19”x20” FactoryLab is 7/11.
@Mario Garcia – Cindy at Toyo will have tracking on/by July 11th.
@Christopher Berger/@Lorena Carrillo – did you place the PO for the actuators for 24”x36” FactoryRobot with MSI on Friday?
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Chris Keller
Sent: Friday, June 19, 2026 11:00 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesGood to hear on the 24” x 36”.
Totally understand the time constraint issue.
Checking on that PO placed on 6/10 and will provide delivery update by Monday.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, June 18, 2026 9:40 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesThe 24" x 36" will be finalized tomorrow. For the last two weeks we had 0 availability to work on this project and I had hoped to get the orders in before.
Can you confirm that order PO26211760, placed on 06/10 for the 21" x 19" is being processed and still expected to arrive on 07/08?
Chris
On Wed, Jun 17, 2026 at 9:13 AM Chris Keller <chrisk@waisales.com> wrote:
Thanks for the reply and update Lorena.
@'Christopher Berger' is the one to approve.
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Tuesday, June 16, 2026 6:12 PM
To: Chris Keller <chrisk@waisales.com>; 'Christopher Berger' <cberger@turnpack.com>; 'Mario Garcia' <mario.garcia@msitec.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesHi no I have not placed the PO yet. Please confirm final approval.
Thank you for your time,
Lorena Carrillo
From: Chris Keller <chrisk@waisales.com>
Sent: Tuesday, June 16, 2026 7:25 AM
To: Christopher Berger <cberger@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesGood morning Chris and team,
Have you placed the below order with Mario/MSI TEC?
With this, we should have the two XYZ systems (19x20” and 24x36” — Factory Lab and Factory Robot) covered.
I’ll check on delivery dates with Toyo today.
The remaining item is the FactoryCube XXYY. I’ll send a separate note on that shortly.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, June 10, 2026 9:28 AM
To: Mario Garcia <mario.garcia@msitec.com>
Cc: Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesMario,
we'll place the order for these stages by tomorrow:
X: GLTH12-L12-600-BL-Y40-C4P2
Price: $1,970 each + 10% Tariff
Y: GLTH8-L12-300-BR-Y20-C4P2
Price: $1,167 each+ 10% Tariff
Z: GLTH5-L6-150-BC-Y10B-C4P2
Price: $970 each + 10% Tariff
Estimated Shipping for QTY(1) each above is ~$250 total
4 week Lead Time
Chris
On Mon, Jun 8, 2026 at 4:00 PM Mario Garcia <mario.garcia@msitec.com> wrote:
Chris,
Pricing below for Actuators Only. I do also provide a ball park price on a MultiAxisSystem version. If its within budget, we can send you a formal quote and 3D file for the MultiAxis System; we need commitment from the customer of an upcoming purchase as this take some engineering time to prepare.
X: GLTH12-L12-600-BL-Y40-C4P2
Price: $1,970 each + 10% Tariff
Y: GLTH8-L12-300-BR-Y20-C4P2
Price: $1,167 each+ 10% Tariff
Z: GLTH5-L6-150-BC-Y10B-C4P2
Price: $970 each + 10% Tariff
Estimated Shipping for QTY(1) each above is ~$250 total
4 week Lead Time
Multi Axis System Price ~$5,300 + 10% Tariff + $500 Shipping 5 to 6 weeks Lead Time.
Catalog Download Ball Screw Linear Actuator - GLTH Series
MARIO GARCIA | FIELD AUTOMATION ENGINEER
MSITEC
p: 602.426.1333 | c: 480.299.4701
w: msitec.com
From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, June 8, 2026 7:21 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesChris,
for the 36"x24" Cantilever gantry the way I see this is:
X: GLTH12-L12-600-BL-Y40-C4P2Y: GLTH8-L12-300-BR-Y20-C4P2
Z: GLTH5-L6-150-BC-Y10B-C4P2
I picked Yaskawa motors but for the time being, I guess we'll buy without motors and single stages. I didn't see on the website where it would show me the specs for these stages. Can you send them to me?
Chris
On Fri, Jun 5, 2026 at 10:08 AM Chris Keller <chrisk@waisales.com> wrote:
Sounds good, please let us know if anything is unclear, we know you need this quickly, you mentioned this one is more urgent than the 19X20” Factory Lab…
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, June 4, 2026 10:59 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesChris,
We are looking at the CAD today and hopefully will have an answer EOD. We must attach the motors to these part numbers to determine the full length before making a decision.
Chris
On Thu, Jun 4, 2026 at 7:50 AM Chris Keller <chrisk@waisales.com> wrote:
Hi Chris
Please verify the open bullets today so we can complete the part number and issue correct quote
We have pricing ready and can send as soon as you confirm.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: doug@toyorobot.com <doug@toyorobot.com>
Sent: Wednesday, June 3, 2026 5:02 PM
To: Sacha Marcroft <sacham@waisales.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Mario Garcia' <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; 'Brandon Benavidez' <bbenavidez@turnpack.com>; 'Lorena Carrillo' <lcarrillo@turnpack.com>; 'TOYO TA1' <ta1@toyorobot.com>; 'Eric Zeng' <ericzeng@toyorobotics.com>; 'Doug Kiernan' <doug@toyorobotics.com>
Subject: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesChris B,
As a follow up to our meeting today.
Here are options for a 24x36 envelope cantilvered system.
Standard actuator leadtime ~3-4 weeks
Create MAS Kit +1-2 weeks.
Catalog section attached.
You can download models here – https://toyo.partcommunity.com/
GLTH12-L?-600-B?-M40-E5
Pick lead, 6, 12, 24mm
600mm stroke = 873mm (34.3”) OAL
Confirm motor position, BL/BR/BM
Confirm motor mount
GLTH8-L?-300-B?-M40-E5
Pick lead, 6, 12, 24mm
300mm stroke = 592mm (23.3”) OAL
Confirm motor position, BL/BR/BM
Confirm motor mount
GLTH5-L?-150-B?-M40-E5
Pick lead, 2, 6, 12, 20mm
Confirm motor position, BL/BR/BM – do you need parallel mount or is in-line, BC okay?
Confirm motor mount
Do you want any limit or home sensors?
Regards,
Doug KiernanTOYO Automation
415.264.9787
*Please note my new email and update your CRM: doug@toyorobotics.com
New TOYO Robotics Americas website going live soon!
From: Sacha Marcroft <sacham@waisales.com>
Sent: Friday, May 22, 2026 11:15 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>; doug@toyorobot.com; TOYO TA1 <ta1@toyorobot.com>; Eric Zeng <ericzeng@toyorobotics.com>
Subject: RE: Place holder for todays call - second system with Motors and DrivesYeah sure we discussed potentially having a traveler on X so was looking at the clearance. With traveler we don’t need the GTH12 since we are splitting the load. The Gth8 Carriage is 160mm (sorry mentioned 120mm that was incorrect) and Z is roughly 55mm wide. We can add an undriven GTH5 traveler (very smooth) traveler or profile so there is no interfere with Y and Z axis on the traveler side.
Rough concept shows profile rail but we use our actuators as travelers as well.
Sacha Marcroft
VP Motion Division
Western Automation
714-473-4883
From: Christopher Berger <cberger@turnpack.com>
Sent: Friday, May 22, 2026 10:45 AM
To: Sacha Marcroft <sacham@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>; doug@toyorobot.com; TOYO TA1 <ta1@toyorobot.com>; Eric Zeng <ericzeng@toyorobotics.com>
Subject: Re: Place holder for todays call - second system with Motors and DrivesThanks Sacha. Looking at the model and your email you are proposing a T-style gantry which we would prefer for clearance reasons but can you briefly explain what you mean by this bullet point?
- GTH8 with motor wrap and 600mm travel is 35” long. Carriage is 120mm and the Width 80mm so traveler or X’ would fit nicely below.
Thanks
Chris
On Fri, May 22, 2026 at 9:19 AM Sacha Marcroft <sacham@waisales.com> wrote:
Hey Gents,
First pass at the larger T stage. T stage Spec’s below and potential solution stages reviewed. Let me know your initial thoughts then we will move to providing a MAS quote.
Attached is the XY potential using GTH12 on x and GTH8 on Y for the 36”x 24” plate.
- XYZ Ballscrew stages for 36" x 24" baseplate without motors (we have/can get Omron Servo Motors)
- XYZ Ballscrew stages for 36" x 24" baseplate with motors
- MAS Ballscrew system for 36" x 24" with Motors
- Option: Add Linear encoder
36” long axis:
- GTH12 with motor wrap and 600mm travel is 34.4” long
- GTH12 with motor wrap and 650mm travel is 36.35” long
- GTH8 with motor wrap and 600mm travel is 35” long. Carriage is 120mm and the Width 80mm so traveler or X’ would fit nicely below.
24” axis:
- GTH8 with motor wrap and 300mm travel is 23.26” long.
6” Z axis:
- GTH5 with motor wrap and 150mm travel is 14.25” long. With motor wrap we need to consider 60mm motor mount. I am sure they have made one but need to check. The stage is 52mm wide model shows a 100w motor
Sacha Marcroft
VP Motion Division
Western Automation
714-473-4883
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, May 21, 2026 3:49 PM
To: Sacha Marcroft <sacham@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Place holder for todays call - second system with Motors and DrivesJust to summarize this one more time:
- FactoryLab
- XYZ Ballscrew stages for 20" x 19" baseplate without motors (we have/can get Omron Servo Motors) -> We are ready to order
- XYZ Ballscrew stages for 20" x 19" baseplate with motors
- MAS Ballscrew system for 20" x 19" with Motors
- Option: Add Linear encoder
- FactoryCube
- XYZ Gantry Linear stages: 400mm dual Y, 500mm X, 150mm Z
- XYZ Gantry Ballscrew stages: 400mm dual Y, 500mm X, 150mm Z
- XXYY Wafer table: ballscrew 350mm min travel for 12" wafer -> We are ready to order
- Option: Add Linear Encoder to Ballscrew stages
- FactoryRobot:
- XYZ Ballscrew stages for 36" x 24" baseplate without motors (we have/can get Omron Servo Motors)
- XYZ Ballscrew stages for 36" x 24" baseplate with motors
- MAS Ballscrew system for 36" x 24" with Motors
- Option: Add Linear encoder
What we will place orders for depends on lead time and pricing but I am interested to get lead time and pricing for all listed items.
Chris
On Thu, May 21, 2026 at 1:28 PM Sacha Marcroft <sacham@waisales.com> wrote:
Let me know if this time slot fits and if not make recommendations for another slot.
Thanks,
________________________________________________________________________________
Microsoft Teams meeting
Meeting ID: 227 243 475 332 88
Passcode: 7dg33tp2
Dial in by phone
+1 469-998-7643,,99664092# United States, Dallas
Phone conference ID: 996 640 92#
For organizers: Meeting options | Reset dial-in PIN
________________________________________________________________________________
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
CONFIDENTIALITY NOTICE: This e-mail transmission and any documents, files or previous messages attached to it may contain confidential or legally privileged information. If you are not the intended recipient, you are hereby notified that you must not read this transmission and that any disclosure, copying, printing, distribution or use of any of the information contained in or attached to this transmission is strictly prohibited. If you received this transmission in error, please immediately notify the sender by telephone or return e-mail and delete the original transmission and its attachments without reading or saving in any manner.
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
by "Chris Keller" <chrisk@waisales.com> - 10:37 - 20 Jul 2026
- PO26211760: 300mm x 200mm x 100mm -> new ship date 07/23 + transit time?
-
RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?
Good morning!
I’ll reach out to our purchasing group and see if they’ve receive tracking information and I’ll advise back shortly.
Thank you!
Jayna Hanselman| Account Coordinator
MSI TEC
p: 602-426-1333
w: msitec.com
From: Chris Keller <chrisk@waisales.com>
Sent: Wednesday, July 15, 2026 8:30 AM
To: Info at Turnpack <info@turnpack.com>; Jayna Hanselman <jaynah@msitec.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Christopher Berger <cberger@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Hi Jayna
Did you receive tracking info from Toyo yet?
I just pinged Cindy and Eric at factory to send over in case you have not seen it yet.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Info at Turnpack <info@turnpack.com>
Sent: Tuesday, July 14, 2026 5:32 PM
To: Jayna Hanselman <jaynah@msitec.com>
Cc: Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Christopher Berger <cberger@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?You don't often get email from info@turnpack.com. Learn why this is important
Hello team, any update on this order?
Respectfully,
Lorena CarrilloOn Mon, Jul 6, 2026, 9:54 AM Jayna Hanselman <jaynah@msitec.com> wrote:
Thank you, Chris!
Jayna Hanselman| Account Coordinator
MSI TEC
p: 602-426-1333
w: msitec.com
From: Chris Keller <chrisk@waisales.com>
Sent: Monday, July 6, 2026 9:30 AM
To: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>; Jayna Hanselman <jaynah@msitec.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Hey guys
Hope everyone had a nice holiday weekend.
The ship date from production team was then confirmed July 16, but we have asked them to expedite the order, and they are now targeting shipment on July 10.
We will keep you posted if there any changes. Thanks.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Thursday, July 2, 2026 12:29 PM
To: 'Mario Garcia' <mario.garcia@msitec.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Hello Team please see updated ship date for these parts.
Thank you for your time,
Lorena Carrillo
From: Mario Garcia <mario.garcia@msitec.com>
Sent: Monday, June 29, 2026 6:14 PM
To: Christopher Berger <cberger@turnpack.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: RE: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Chris,
These are meant to work with the 60mm frame Omron motor below; image received by Brandon last week
Omron Motor [Shaft Diameter = 11mm]:
From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, June 29, 2026 4:11 PM
To: Mario Garcia <mario.garcia@msitec.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Chris Keller <chrisk@waisales.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Thanks Mario. These will also work with the Omron motors, correct?
@Lorena Carrillo If Mario confirms please proceed and place the order. I will create the project to assign this to.
Chris
On Mon, Jun 29, 2026 at 4:07 PM Mario Garcia <mario.garcia@msitec.com> wrote:
Brandon,
You can proceed with same pricing as before. After we get a Purchase order, TOYO will generate drawings for you to approve. Shipping after receipt of order is about 4 weeks.
X: GLTH12-L12-600-BL-Y40-C4P2
Price: $1,970 each + 10% Tariff
Y: GLTH8-L12-300-BL-Y20-C4P2
Price: $1,167 each+ 10% Tariff
Z: GLTH5-L6-150-BC-Y10B-C4P2
Price: $970 each + 10% Tariff
Estimated Shipping for QTY(1) each above is ~$250 total
4 week Lead Time
MARIO GARCIA | FIELD AUTOMATION ENGINEER
MSITEC
p: 602.426.1333 | c: 480.299.4701
w: msitec.com
From: Brandon Benavidez <bbenavidez@turnpack.com>
Sent: Tuesday, June 23, 2026 8:32 AM
To: Chris Keller <chrisk@waisales.com>; Mario Garcia <mario.garcia@msitec.com>
Cc: Christopher Berger <cberger@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Updates/Status: 24x36 Factory Robot order placed? 19x20 Factory Lab ship date?Chris/Mario,
Yesterday, we were able to look more closely at the 24" x 36" [FactoryRobot] machine and found one small change we'd like to make. When you get a chance, please update the quote to include the following changes (including those needed for the appropriate motor mounting). Since this is just for the actuators, can you ensure they will work with our current Omron motors? The CAD I currently have for the actuators lacks the appropriate mounting. I've included the Omron motor drawing below for reference.
Actuator Part Numbers:
X: GLTH12-L12-600-BL-Y40-C4P2
Y: GLTH8-L12-300-BL-Y20-C4P2_0 [Previously was: GLTH8-L12-300-BR-Y20-C4P2_0]
Z: GLTH5-L6-150-BC-Y10B-C4P2_0
Omron Motor [Shaft Diameter = 11mm]:
Please let us know if you need anything additional. Thank you
Best regards,
Brandon Benavidez - Mechanical Engineer
Turnpack, LLC
Phone #: 1 (480) 276-2897
On Mon, Jun 22, 2026 at 6:53 AM Chris Keller <chrisk@waisales.com> wrote:
Hello all
The estimated ship date from Toyo for the ordered actuators for 19”x20” FactoryLab is 7/11.
@Mario Garcia – Cindy at Toyo will have tracking on/by July 11th.
@Christopher Berger/@Lorena Carrillo – did you place the PO for the actuators for 24”x36” FactoryRobot with MSI on Friday?
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Chris Keller
Sent: Friday, June 19, 2026 11:00 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesGood to hear on the 24” x 36”.
Totally understand the time constraint issue.
Checking on that PO placed on 6/10 and will provide delivery update by Monday.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, June 18, 2026 9:40 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesThe 24" x 36" will be finalized tomorrow. For the last two weeks we had 0 availability to work on this project and I had hoped to get the orders in before.
Can you confirm that order PO26211760, placed on 06/10 for the 21" x 19" is being processed and still expected to arrive on 07/08?
Chris
On Wed, Jun 17, 2026 at 9:13 AM Chris Keller <chrisk@waisales.com> wrote:
Thanks for the reply and update Lorena.
@'Christopher Berger' is the one to approve.
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Tuesday, June 16, 2026 6:12 PM
To: Chris Keller <chrisk@waisales.com>; 'Christopher Berger' <cberger@turnpack.com>; 'Mario Garcia' <mario.garcia@msitec.com>
Cc: 'Brandon Benavidez' <bbenavidez@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesHi no I have not placed the PO yet. Please confirm final approval.
Thank you for your time,
Lorena Carrillo
From: Chris Keller <chrisk@waisales.com>
Sent: Tuesday, June 16, 2026 7:25 AM
To: Christopher Berger <cberger@turnpack.com>; Mario Garcia <mario.garcia@msitec.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: RE: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesGood morning Chris and team,
Have you placed the below order with Mario/MSI TEC?
With this, we should have the two XYZ systems (19x20” and 24x36” — Factory Lab and Factory Robot) covered.
I’ll check on delivery dates with Toyo today.
The remaining item is the FactoryCube XXYY. I’ll send a separate note on that shortly.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, June 10, 2026 9:28 AM
To: Mario Garcia <mario.garcia@msitec.com>
Cc: Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesMario,
we'll place the order for these stages by tomorrow:
X: GLTH12-L12-600-BL-Y40-C4P2
Price: $1,970 each + 10% Tariff
Y: GLTH8-L12-300-BR-Y20-C4P2
Price: $1,167 each+ 10% Tariff
Z: GLTH5-L6-150-BC-Y10B-C4P2
Price: $970 each + 10% Tariff
Estimated Shipping for QTY(1) each above is ~$250 total
4 week Lead Time
Chris
On Mon, Jun 8, 2026 at 4:00 PM Mario Garcia <mario.garcia@msitec.com> wrote:
Chris,
Pricing below for Actuators Only. I do also provide a ball park price on a MultiAxisSystem version. If its within budget, we can send you a formal quote and 3D file for the MultiAxis System; we need commitment from the customer of an upcoming purchase as this take some engineering time to prepare.
X: GLTH12-L12-600-BL-Y40-C4P2
Price: $1,970 each + 10% Tariff
Y: GLTH8-L12-300-BR-Y20-C4P2
Price: $1,167 each+ 10% Tariff
Z: GLTH5-L6-150-BC-Y10B-C4P2
Price: $970 each + 10% Tariff
Estimated Shipping for QTY(1) each above is ~$250 total
4 week Lead Time
Multi Axis System Price ~$5,300 + 10% Tariff + $500 Shipping 5 to 6 weeks Lead Time.
Catalog Download Ball Screw Linear Actuator - GLTH Series
MARIO GARCIA | FIELD AUTOMATION ENGINEER
MSITEC
p: 602.426.1333 | c: 480.299.4701
w: msitec.com
From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, June 8, 2026 7:21 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesChris,
for the 36"x24" Cantilever gantry the way I see this is:
X: GLTH12-L12-600-BL-Y40-C4P2Y: GLTH8-L12-300-BR-Y20-C4P2
Z: GLTH5-L6-150-BC-Y10B-C4P2
I picked Yaskawa motors but for the time being, I guess we'll buy without motors and single stages. I didn't see on the website where it would show me the specs for these stages. Can you send them to me?
Chris
On Fri, Jun 5, 2026 at 10:08 AM Chris Keller <chrisk@waisales.com> wrote:
Sounds good, please let us know if anything is unclear, we know you need this quickly, you mentioned this one is more urgent than the 19X20” Factory Lab…
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, June 4, 2026 10:59 AM
To: Chris Keller <chrisk@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesChris,
We are looking at the CAD today and hopefully will have an answer EOD. We must attach the motors to these part numbers to determine the full length before making a decision.
Chris
On Thu, Jun 4, 2026 at 7:50 AM Chris Keller <chrisk@waisales.com> wrote:
Hi Chris
Please verify the open bullets today so we can complete the part number and issue correct quote
We have pricing ready and can send as soon as you confirm.
Chris Keller
Western Automation
AZ & NV
602. 802.5061 | Mobile
949. 859.6988 | Office
From: doug@toyorobot.com <doug@toyorobot.com>
Sent: Wednesday, June 3, 2026 5:02 PM
To: Sacha Marcroft <sacham@waisales.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Mario Garcia' <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; 'Brandon Benavidez' <bbenavidez@turnpack.com>; 'Lorena Carrillo' <lcarrillo@turnpack.com>; 'TOYO TA1' <ta1@toyorobot.com>; 'Eric Zeng' <ericzeng@toyorobotics.com>; 'Doug Kiernan' <doug@toyorobotics.com>
Subject: 24x36 Factory Robot - RE: Place holder for todays call - second system with Motors and DrivesChris B,
As a follow up to our meeting today.
Here are options for a 24x36 envelope cantilvered system.
Standard actuator leadtime ~3-4 weeks
Create MAS Kit +1-2 weeks.
Catalog section attached.
You can download models here – https://toyo.partcommunity.com/
GLTH12-L?-600-B?-M40-E5
Pick lead, 6, 12, 24mm
600mm stroke = 873mm (34.3”) OAL
Confirm motor position, BL/BR/BM
Confirm motor mount
GLTH8-L?-300-B?-M40-E5
Pick lead, 6, 12, 24mm
300mm stroke = 592mm (23.3”) OAL
Confirm motor position, BL/BR/BM
Confirm motor mount
GLTH5-L?-150-B?-M40-E5
Pick lead, 2, 6, 12, 20mm
Confirm motor position, BL/BR/BM – do you need parallel mount or is in-line, BC okay?
Confirm motor mount
Do you want any limit or home sensors?
Regards,
Doug KiernanTOYO Automation
415.264.9787
*Please note my new email and update your CRM: doug@toyorobotics.com
New TOYO Robotics Americas website going live soon!
From: Sacha Marcroft <sacham@waisales.com>
Sent: Friday, May 22, 2026 11:15 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>; doug@toyorobot.com; TOYO TA1 <ta1@toyorobot.com>; Eric Zeng <ericzeng@toyorobotics.com>
Subject: RE: Place holder for todays call - second system with Motors and DrivesYeah sure we discussed potentially having a traveler on X so was looking at the clearance. With traveler we don’t need the GTH12 since we are splitting the load. The Gth8 Carriage is 160mm (sorry mentioned 120mm that was incorrect) and Z is roughly 55mm wide. We can add an undriven GTH5 traveler (very smooth) traveler or profile so there is no interfere with Y and Z axis on the traveler side.
Rough concept shows profile rail but we use our actuators as travelers as well.
Sacha Marcroft
VP Motion Division
Western Automation
714-473-4883
From: Christopher Berger <cberger@turnpack.com>
Sent: Friday, May 22, 2026 10:45 AM
To: Sacha Marcroft <sacham@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>; doug@toyorobot.com; TOYO TA1 <ta1@toyorobot.com>; Eric Zeng <ericzeng@toyorobotics.com>
Subject: Re: Place holder for todays call - second system with Motors and DrivesThanks Sacha. Looking at the model and your email you are proposing a T-style gantry which we would prefer for clearance reasons but can you briefly explain what you mean by this bullet point?
- GTH8 with motor wrap and 600mm travel is 35” long. Carriage is 120mm and the Width 80mm so traveler or X’ would fit nicely below.
Thanks
Chris
On Fri, May 22, 2026 at 9:19 AM Sacha Marcroft <sacham@waisales.com> wrote:
Hey Gents,
First pass at the larger T stage. T stage Spec’s below and potential solution stages reviewed. Let me know your initial thoughts then we will move to providing a MAS quote.
Attached is the XY potential using GTH12 on x and GTH8 on Y for the 36”x 24” plate.
- XYZ Ballscrew stages for 36" x 24" baseplate without motors (we have/can get Omron Servo Motors)
- XYZ Ballscrew stages for 36" x 24" baseplate with motors
- MAS Ballscrew system for 36" x 24" with Motors
- Option: Add Linear encoder
36” long axis:
- GTH12 with motor wrap and 600mm travel is 34.4” long
- GTH12 with motor wrap and 650mm travel is 36.35” long
- GTH8 with motor wrap and 600mm travel is 35” long. Carriage is 120mm and the Width 80mm so traveler or X’ would fit nicely below.
24” axis:
- GTH8 with motor wrap and 300mm travel is 23.26” long.
6” Z axis:
- GTH5 with motor wrap and 150mm travel is 14.25” long. With motor wrap we need to consider 60mm motor mount. I am sure they have made one but need to check. The stage is 52mm wide model shows a 100w motor
Sacha Marcroft
VP Motion Division
Western Automation
714-473-4883
From: Christopher Berger <cberger@turnpack.com>
Sent: Thursday, May 21, 2026 3:49 PM
To: Sacha Marcroft <sacham@waisales.com>
Cc: Mario Garcia <mario.garcia@msitec.com>; Chris Keller <chrisk@waisales.com>; Brandon Benavidez <bbenavidez@turnpack.com>; Lorena Carrillo <lcarrillo@turnpack.com>
Subject: Re: Place holder for todays call - second system with Motors and DrivesJust to summarize this one more time:
- FactoryLab
- XYZ Ballscrew stages for 20" x 19" baseplate without motors (we have/can get Omron Servo Motors) -> We are ready to order
- XYZ Ballscrew stages for 20" x 19" baseplate with motors
- MAS Ballscrew system for 20" x 19" with Motors
- Option: Add Linear encoder
- FactoryCube
- XYZ Gantry Linear stages: 400mm dual Y, 500mm X, 150mm Z
- XYZ Gantry Ballscrew stages: 400mm dual Y, 500mm X, 150mm Z
- XXYY Wafer table: ballscrew 350mm min travel for 12" wafer -> We are ready to order
- Option: Add Linear Encoder to Ballscrew stages
- FactoryRobot:
- XYZ Ballscrew stages for 36" x 24" baseplate without motors (we have/can get Omron Servo Motors)
- XYZ Ballscrew stages for 36" x 24" baseplate with motors
- MAS Ballscrew system for 36" x 24" with Motors
- Option: Add Linear encoder
What we will place orders for depends on lead time and pricing but I am interested to get lead time and pricing for all listed items.
Chris
On Thu, May 21, 2026 at 1:28 PM Sacha Marcroft <sacham@waisales.com> wrote:
Let me know if this time slot fits and if not make recommendations for another slot.
Thanks,
________________________________________________________________________________
Microsoft Teams meeting
Meeting ID: 227 243 475 332 88
Passcode: 7dg33tp2
Dial in by phone
+1 469-998-7643,,99664092# United States, Dallas
Phone conference ID: 996 640 92#
For organizers: Meeting options | Reset dial-in PIN
________________________________________________________________________________
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
CONFIDENTIALITY NOTICE: This e-mail transmission and any documents, files or previous messages attached to it may contain confidential or legally privileged information. If you are not the intended recipient, you are hereby notified that you must not read this transmission and that any disclosure, copying, printing, distribution or use of any of the information contained in or attached to this transmission is strictly prohibited. If you received this transmission in error, please immediately notify the sender by telephone or return e-mail and delete the original transmission and its attachments without reading or saving in any manner.
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
--
Christopher Berger
Phone: +1 (480) 331-1878
Cell: +1 (480) 273-4686
cberger@turnpack.com | www.turnpack.com
by "Jayna Hanselman" <jaynah@msitec.com> - 11:38 - 15 Jul 2026
