Info Inbox

while reviewing your account for the tax credit request, we found we do not have a valid tax certificate on file. To proceed with the tax credit request, please send the backdated 2025 and 2026 AZ ARIZONA resale/exemption certificate to tax.certs@mouser.com.

RE: Shipment Notification on Your Purchase Order PO25521532 from Mouser Electronics, Inc. Invoice Attached

Mouser Electronics, Inc. - Shipment Notification

Hello Lorena,

Please note we have issued tax credit for the invoice# 88080283. Here is the attached credit memo copy for your reference.

Thank you,

Arvind N P, Customer Accounts Representative

Mouser Electronics, Inc.

1000 N. Main Street, Mansfield, Texas 76063

Tel: 800-333-9924 | Fax: 817-804-3801 | Americas.Accts@mouser.com

www.mouser.com

The Newest Products for Your Newest Designs^®

From: Lorena <info@turnpack.com>
Sent: Wednesday, February 25, 2026 6:21 AM
To: Americas Accts <Americas.Accts@mouser.com>
Subject: RE: Shipment Notification on Your Purchase Order PO25521532 from Mouser Electronics, Inc. Invoice Attached

--Sent by External Sender: info@turnpack.com

That is impossible as I have many emails about this.

Thank you for your time,

Lorena Carrillo

From: Americas Accts <Americas.Accts@mouser.com>
Sent: Saturday, February 21, 2026 3:00 PM
To: Lorena <info@turnpack.com>
Subject: RE: Shipment Notification on Your Purchase Order PO25521532 from Mouser Electronics, Inc. Invoice Attached

Hello Lorena,

The following link will take you to our website and it will provide the certificate(s) by state for you to complete. http://www.mouser.com/sales-tax-information/

Please include your customer number on the completed certificate(s), then send the certificate(s) to tax.certs@mouser.com. Once the certificate(s) is received, and your account updated, the credit(s) will be issued for any tax charged.

If you have any questions, please feel free to contact us at (800) 333-9924.

Thank you for your business and we look forward to hearing from you.

Arvind N P, Customer Accounts Representative

Mouser Electronics, Inc.

1000 N. Main Street, Mansfield, Texas 76063

Tel: 800-333-9924 | Fax: 817-804-3801 | Americas.Accts@mouser.com

www.mouser.com

The Newest Products for Your Newest Designs^?

From: Lorena <info@turnpack.com>
Sent: Friday, February 6, 2026 6:30 AM
To: Americas Accts <Americas.Accts@mouser.com>
Subject: FW: Shipment Notification on Your Purchase Order PO25521532 from Mouser Electronics, Inc. Invoice Attached

--Sent by External Sender: info@turnpack.com

Sorry I just noticed there is tax when our card was charged. We have a resale on file so not sure why there is tax. Can you please credit back.

Thank you for your time,

Lorena Carrillo

From: Lorena <info@turnpack.com>
Sent: Tuesday, February 3, 2026 1:29 PM
To: americas.accts@mouser.com
Subject: FW: Shipment Notification on Your Purchase Order PO25521532 from Mouser Electronics, Inc. Invoice Attached

Charge to our credit card ending in XX1004

Thank you for your time,

Lorena Carrillo

From: Mouser Order Update <orders@mouser.com>
Sent: Wednesday, December 31, 2025 8:26 AM
To: info@turnpack.com
Subject: Shipment Notification on Your Purchase Order PO25521532 from Mouser Electronics, Inc. Invoice Attached

Shipment Notification
Purchase Order Number :	PO25521532
Invoice Number :	88080283
Contact Name :	CHRISTOPHER BERGER
Order Date :	DEC 31, 2025
Ship Date :	DEC 31, 2025
Estimated Arrival Date :	JAN 07, 2026
Customer Number :	612B535

Christopher Berger,

Your order has shipped.

The attached invoice provides the details of this shipment.

Track your shipment.

Thank you and we appreciate your business.

Customer Service

Please direct inquiries to:
Mouser Electronics, Inc.
Phone: 800-346-6873
orders@mouser.com

Office Hours:
7:00am to 8:00pm CST (Monday - Friday)

Tracking Number
1Z7759450314721489

Customer Service Representative	Shipping Method	Terms
Internet Customer Service	UPS Ground Service	Net 30

Bill To

TURNPACK
Attn: CHRIS BERGER
22425 S SCOTLAND CT
104
QUEEN CREEK, ARIZONA 85142
UNITED STATES

Ship To

TURNPACK
Attn: CHRIS BERGER
22425 S SCOTLAND CT
STE 104
QUEEN CREEK, ARIZONA 85142
UNITED STATES

Line Number

Mouser Part Number
Customer Part Number
Manufacturer Part Number
Description

Quantity Ordered

Quantity Shipped

1

¹

651-3039007

3039007
Phoenix Contact Terminal Block Tools & Accessories
US HTS:8536908585 ECCN:EAR99 COO:DE

5

¹RoHS: Compliant

This order is subject to all terms and conditions displayed at:
https://www.mouser.com/saleterms

CONFIDENTIALITY. This electronic mail and any files transmitted with it may contain information proprietary to Mouser Electronics, Inc. or one of its subsidiaries or affiliates, and are intended solely for the use of the individual or entity to whom they are addressed, shall be maintained in confidence and not disclosed to third parties without the written consent of the sender. If you are not the intended recipient or the person responsible for delivering the electronic mail to the intended recipient, be advised that you have received this electronic mail in error and that any use, dissemination, forwarding, printing, or copying of this electronic mail is strictly prohibited. If you have received this electronic mail in error, please immediately notify the sender by return mail. Thank you for your compliance.

by "Americas Accts" <Americas.Accts@mouser.com> - 03:06 - 6 Mar 2026

4 attachments 4 attachments

Re: Turnpack, LLC Quotation (Ref SO2508862) - Midas HGRSV

Lorena,

While we want the equipment and been waiting months, a couple if extra days will not kill us. Please use deferred.

Regards,

Manny

From: "Lorena" <info@turnpack.com>
Subject: Turnpack, LLC Quotation (Ref SO2508862) - Midas HGRSV
Date: 20 February 2026 19:32
To: "Brian Fox" <Brian.Fox@micross.com>
Cc: "'Turnpack, LLC SO2508862'" <catchall@turnpack.com>, "'Tim Sparks'" <sparks@spelcon.com>, "Jan Rodriguez" <Jan.Rodriguez@micross.com>, "Manny Sammartino" <Manny.Sammartino@micross.com>

CAUTION: External Sender

Hello Micross Team,

Following up on this request. We can use your Fedex Freight account, we would just need to know how time frame in which you choose to receive the items.

I have also reached out to our courier and these are their rates.

Thank you for the confirmation!

Rate:$866.76 1 Day

Rate:$718.59 2 Day

Rate:$574.03 3 Day

Rate:$346.35 Deferred

Thank you for your time,

Lorena Carrillo

From: Lorena <info@turnpack.com>
Sent: Thursday, February 19, 2026 5:25 PM
To: 'Brian Fox' <Brian.Fox@micross.com>
Cc: 'Turnpack, LLC SO2508862' <catchall@turnpack.com>; 'Tim Sparks' <sparks@spelcon.com>; 'Jan Rodriguez' <Jan.Rodriguez@micross.com>; 'Manny Sammartino' <Manny.Sammartino@micross.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO2508862) - Midas HGRSV

Hello Micross Team,

Can you please confirm how you wish to ship the Hotgas machine? Below is the freight information.
Please note the pelican cases will need to be returned freight prepaid to the pickup location address within 30 days of delivery.

Pickup: 10 Tower Office Park, Suite 606, Woburn, MA 01801
Packaging: Pelican Case
Exterior Size: 33.43” x 28.4” x 17.65"
Weight: 139 lbs
Quantity: 2

Lorena Carrillo

Office Manager

Office: 480-331-1878
Line: 781-938-0069

22425 S Scotland Ct, Suite104, Queen Creek, AZ 85142

lcarrillo@turnpack.com | www.turnpack.com
https://www.turnpack.com/midas-rework/delidder

From: Info at Turnpack <info@turnpack.com>
Sent: Friday, February 13, 2026 1:09 PM
To: Brian Fox <Brian.Fox@micross.com>
Cc: Turnpack, LLC SO2508862 <catchall@turnpack.com>; Tim Sparks <sparks@spelcon.com>; Jan Rodriguez <Jan.Rodriguez@micross.com>; Manny Sammartino <Manny.Sammartino@micross.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO2508862) - Midas HGRSV

Hi Brian,

We are making significant progress on your order. Our machine builder, George, has received the remaining parts and requires a few more days to complete assembly and testing. We expect to ship the machine to you next week.

Attached is the Site Prep Sheet for the system. Please let us know if you have any questions regarding these requirements.

I have tentatively scheduled the installation for 03/09/26, but we can coordinate to finalize the exact date.

Best regards,

Chris

On Fri, Feb 13, 2026 at 5:49 AM Brian Fox <Brian.Fox@micross.com> wrote:

Hello Chris,

Any update?

Best Regards,

Brian Fox

Director Process Engineer

Micross Components

1810 South Orange Blossom Trail

Apopka, FL 32703

(407) 296-5623 (office)

(631) 495-0182 (Mobile)

Email: brian.fox@micross.com

From: Info at Turnpack <info@turnpack.com>
Sent: Wednesday, February 4, 2026 10:21 AM
To: Brian Fox <Brian.Fox@micross.com>
Cc: Turnpack, LLC SO2508862 <catchall@turnpack.com>; Tim Sparks <sparks@spelcon.com>; Jan Rodriguez <Jan.Rodriguez@micross.com>; Manny Sammartino <Manny.Sammartino@micross.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO2508862) - Midas HGRSV

CAUTION: External Sender

Hi Brian,

I can't win on this one. We had the top front and back panel at Coating for Black Anodize but then they ended shutting down the office for the snow storm. They got back last week and are working through the backlog and will ship the panels to us on Friday. The panels (inc. the buttons and controls) are installed last and we should be able to ship the machine out next week.

I will also send you a Site Prep Sheet later today just to make sure you have the facilities side in place as well.

Thanks,

Chris

On Fri, Nov 14, 2025 at 12:42 PM Brian Fox <Brian.Fox@micross.com> wrote:

Good afternoon,

Please provide status update?

Brian Fox

-------- Original Message --------
From: Brian Fox <Brian.Fox@micross.com>
Date: Thu, October 30, 2025 11:51 AM -0400
To: Info at Turnpack <info@turnpack.com>
CC: "Turnpack, LLC SO2508862" <catchall@turnpack.com>, Tim Sparks <sparks@spelcon.com>, Jan Rodriguez <Jan.Rodriguez@micross.com>, Manny Sammartino <Manny.Sammartino@micross.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO2508862) - Midas HGRSV

Hello Chris,

This is disappointing news a two month slip is significant. Please keep us posted as we have production qualifications waiting for this tool and this slip will impact our year end.

Best Regards,

Brian Fox

Director Process Engineer

Micross Components

1810 South Orange Blossom Trail

Apopka, FL 32703

(407) 296-5623 (office)

(631) 495-0182 (Mobile)

Email: brian.fox@micross.com

From: Info at Turnpack <info@turnpack.com>
Sent: Thursday, October 30, 2025 11:47 AM
To: Brian Fox <Brian.Fox@micross.com>
Cc: Turnpack, LLC SO2508862 <catchall@turnpack.com>; Tim Sparks <sparks@spelcon.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO2508862) - Midas HGRSV

CAUTION: External Sender

Hi Brian,

We are dealing with some supply chain issues on the Jet Positioner but should be able to get it out early/middle of December, apologies for the delay but I'll keep you posted.

Chris

On Thu, Oct 30, 2025 at 8:19 AM Brian Fox <Brian.Fox@micross.com> wrote:

Hello Chris,

Any update on delivery?

Thank you,

Best Regards,

Brian Fox

Director Process Engineer

Micross Components

1810 South Orange Blossom Trail

Apopka, FL 32703

(407) 296-5623 (office)

(631) 495-0182 (Mobile)

Email: brian.fox@micross.com

From: Info at Turnpack <info@turnpack.com>
Sent: Monday, October 13, 2025 10:51 PM
To: Brian Fox <Brian.Fox@micross.com>
Cc: Turnpack, LLC SO2508862 <catchall@turnpack.com>; Tim Sparks <sparks@spelcon.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO2508862) - Midas HGRSV

CAUTION: External Sender

Hi Brian,

We are working on getting a firm date for you. We have a little supply chain issue with our heater manufacturer that we are trying to resolve. I should know by the end of this week.

Chris

On Mon, Oct 13, 2025, 7:10 AM Brian Fox <Brian.Fox@micross.com> wrote:

Good Morning,

Can you get me a ship date for this system order?

Best Regards,

Brian Fox

Director Process Engineer

Micross Components

1810 South Orange Blossom Trail

Apopka, FL 32703

(407) 296-5623 (office)

(631) 495-0182 (Mobile)

Email: brian.fox@micross.com

From: sparks notifications@turnpack.com
Sent: Friday, February 28, 2025 9:37 AM
To: Brian Fox <Brian.Fox@micross.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO2508862) - Midas HGRSV

CAUTION: External Sender

Brian, Do you have specifics you can send me on the HGRS-1 system, including purchase price? I will try to find a buyer. -Tim From: Brian Fox <notifications@turnpack.com> Sent: [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏

Sign & Pay Quotation

SO2508862
$ 54,139.18
Expires on 03/28/2025

Brian,

Do you have specifics you can send me on the HGRS-1 system, including purchase price?

I will try to find a buyer.

-Tim

From: Brian Fox <notifications@turnpack.com>
Sent: Wednesday, February 26, 2025 5:22 PM
To: Tim Sparks <sparks@spelcon.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO2508862) - Midas HGRSV

Hi Chris, Thank you for the quote is there any consideration for a trade in of the HGRS-1 that we have the tool has hardly been used and was purchases in 2022. Best Regards, Brian Fox [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏

by "Manny Sammartino" <Manny.Sammartino@micross.com> - 04:41 - 21 Feb 2026

A shipment from order #14598 has been delivered

Your order has been delivered

Order #14598

Your order has been delivered

Haven't received your package yet? Let us know

View your order

or Visit our store

USPS tracking number: 9405509105116530806541

Items in this shipment

Alpha Solder Preforms 0603 SAC305 Lead-Free, Tape & Reel, 4000 pc Reel × 1

If you have any questions, reply to this email or contact us at sales@stellartechnical.com

by "Stellar Technical Products" <store+24516431@t.shopifyemail.com> - 03:36 - 21 Feb 2026

A shipment from order #14598 is out for delivery

Your order is out for delivery

Order #14598

Your order is out for delivery

Your order is out for delivery. Track your shipment to see the delivery status.

Estimated delivery date: February 21, 2026

Track my shipment

or Visit our store

USPS tracking number: 9405509105116530806541

Items in this shipment

Alpha Solder Preforms 0603 SAC305 Lead-Free, Tape & Reel, 4000 pc Reel × 1

If you have any questions, reply to this email or contact us at sales@stellartechnical.com

by "Stellar Technical Products" <store+24516431@t.shopifyemail.com> - 12:42 - 21 Feb 2026

hi

Have a good day?

by "toshi kajo" <kajotoshi5@gmail.com> - 05:36 - 21 Feb 2026

[Preview] Report Domain: turnpack.com Submitter: enterprise.protection.outlook.com Report-ID: 9d327e7bb84f4c218cab72f27c1fbc49

This is a DMARC aggregate report from Microsoft Corporation. For Emails received between 2026-02-19 00:00:00 UTC to 2026-02-20 00:00:00 UTC. div>

You're receiving this email because you have included your email address in the 'rua' tag of your DMARC record in DNS for turnpack.com. Please remove your email address from the 'rua' tag if you don't want to receive this email.

Please do not respond to this e-mail. This mailbox is not monitored and you will not receive a response. For any feedback/suggestions, kindly mail to dmarcreportfeedback@microsoft.com.

Microsoft respects your privacy. Review our Online Services Privacy Statement.
One Microsoft Way, Redmond, WA, USA 98052. div >

by "DMARC Aggregate Report" <dmarcreport@microsoft.com> - 03:56 - 21 Feb 2026

1 attachments 1 attachments

Invoice for Your Order PO26071605

562-692-5911
562-695-2323 (fax)
la.sales@mcmaster.com

Invoice

Billed to

TURNPACK LLC
22425 S SCOTLAND CT STE 104
QUEEN CREEK AZ 85142

Purchase Order	PO26071605
Total	$140.30
Invoice	60262397
Invoice Date	2/20/26
Payment Terms	2% 10, Net 30
Deduct $2.54 on merchandise if paid by 3/2/26.

Shipped to

Attention: Suite 104

Turnpack LLC
22425 S Scotland CT Ste 104
Queen Creek AZ 85142

Mail Payment to	McMaster-Carr PO Box 7690 Chicago IL 60680-7690
Your Account	438808000

Christopher Berger placed this order.

Line		Product	Ordered	Shipped	Balance	Price	Total
1	52365K65	Extreme-Temperature PTFE Tubing for Chemicals Semi-Clear with Black Stripe, 1/4" ID, 3/8" OD, 10 ft. Length	1 Each	1	0	127.20 Each	127.20

Merchandise	127.20
Shipping	13.10
Total	$140.30

Packing List	Shipped	Weight	Carrier	Tracking
3112320-01	02/20/2026	2 lb	UPS	1Z0526850313483682

Federal ID 36-1458720

by "McMaster-Carr" <invoice.reply@mcmaster.com> - 02:36 - 21 Feb 2026

Re: Turnpack, LLC Order (Ref PO26071602)

Hi Lorena,

You added the line 1 and 2. Do you need another set? You had already sent a PO with those. Do you want us to replace that PO with this one?

Have a good weekend

Nick Johnson

District Sales Manager - Northern California

Direct: 925.440.0458 | nick.johnson@omron.com

Omron Automation Americas

2895 Greenspoint Parkway, Suite 200, Hoffman Estates, IL 60169

automation.omron.com

This is a confidential message. If received in error, delete it and notify the sender.

From: Lorena Carrillo <info@turnpack.com>
Sent: Friday, February 20, 2026 6:42:51 PM
To: Nick Johnson / OEI <nick.johnson@omron.com>
Subject: Turnpack, LLC Order (Ref PO26071602)

Dear Orders (Omron Automation Americas)

Nick has been BCC'd on this order

Please find attached purchase order PO26071602 with reference: Feb 19, 2026 at 11:54 AM amounting in $ 1,486.30 from Turnpack, LLC as well as the resale certificate, for your review and action.

The receipt is expected for 02/19/2026, if this date is not achievable, please reply with an available date for reconsideration.

**Please acknowledge the receipt of this order and lead time.

Turnpack, LLC

+1 480-331-1878 | info@turnpack.com | https://www.turnpack.com

Powered by Odoo

WARNING! This is an email from an external party.

Do not click on any link or open any attachment if you cannot ascertain that it is safe.

by Nick Johnson - 09:46 - 20 Feb 2026

1 attachments 1 attachments

RE: Turnpack, LLC Order (Ref PO26071602)

Nick Johnson / OEI reacted to your message:

From: Lorena <info@turnpack.com>
Sent: Saturday, February 21, 2026 3:12:56 AM
To: Nick Johnson / OEI <nick.johnson@omron.com>; ?= 54 AM)' <catchall@turnpack.com>
Subject: RE: Turnpack, LLC Order (Ref PO26071602)

If it is the same PO please update.

Thank you for your time,

Lorena Carrillo

From: nick.johnson@omron.com <nick.johnson@omron.com>
Sent: Friday, February 20, 2026 7:46 PM
To: PO26071602 (Feb 19, 2026 at 11:54 AM) <catchall@turnpack.com>; Lorena Carrillo <info@turnpack.com>
Subject: Re: Turnpack, LLC Order (Ref PO26071602)

Hi Lorena,

You added the line 1 and 2. Do you need another set? You had already sent a PO with those. Do you want us to replace that PO with this one?

Have a good weekend

Nick Johnson

District Sales Manager - Northern California

Direct: 925.440.0458 | nick.johnson@omron.com

Omron Automation Americas

2895 Greenspoint Parkway, Suite 200, Hoffman Estates, IL 60169

automation.omron.com

This is a confidential message. If received in error, delete it and notify the sender.

From: Lorena Carrillo <info@turnpack.com>
Sent: Friday, February 20, 2026 6:42:51 PM
To: Nick Johnson / OEI <nick.johnson@omron.com>
Subject: Turnpack, LLC Order (Ref PO26071602)

Dear Orders (Omron Automation Americas) Nick has been BCC'd on this order Please find attached purchase order PO26071602 with reference: Feb 19, 2026 at 11:54 AM amounting in $ [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏

PO26071602
$ 1,486.30 due 2/19/26

Dear Orders (Omron Automation Americas)

Nick has been BCC'd on this order

Please find attached purchase order PO26071602 with reference: Feb 19, 2026 at 11:54 AM amounting in $ 1,486.30 from Turnpack, LLC as well as the resale certificate, for your review and action.

The receipt is expected for 02/19/2026, if this date is not achievable, please reply with an available date for reconsideration.

**Please acknowledge the receipt of this order and lead time.

Turnpack, LLC

+1 480-331-1878 | info@turnpack.com | https://www.turnpack.com

Powered by Odoo

WARNING! This is an email from an external party.

Do not click on any link or open any attachment if you cannot ascertain that it is safe.

WARNING! This is an email from an external party.

Do not click on any link or open any attachment if you cannot ascertain that it is safe.

by Nick Johnson - 11:56 - 20 Feb 2026

Shipped on Order PO26071605: Tubing

We shipped the tubing on order PO26071605. You will receive them Monday. Track your shipment using UPS 1Z0526850313483682.

by "McMaster-Carr" <la.sales@mcmaster.com> - 09:26 - 20 Feb 2026

Confirmation for Your Order PO26071605

Thank you for your order. We will deliver your items on Monday between 10 am and 12 pm.

Confirmation

Delivery address Turnpack LLC 22425 S Scotland CT Ste 104 Queen Creek AZ 85142 Attention: Suite 104 Billing address Turnpack LLC 22425 S Scotland CT Ste 104 Queen Creek AZ 85142	Delivery method UPS Ground	Order date 2/20/2026
	Payment method Invoice	Placed by Christopher Berger
		McMaster-Carr number 3112320

PO26071605
Delivers Feb 23, 10 am - 12 pm
1	Extreme-Temperature PTFE Tubing for Chemicals Semi-Clear W/Blk Stripe, 1/4" ID, 3/8" OD, 10 ft. Length 52365K65	1 each	127.20 each	$127.20

	Merchandise	127.20
	Shipping	13.10
	Total	$140.30

Your order is subject only to our terms and conditions, available at www.mcmaster.com or from our Sales Department.

Phone: (562) 692-5911

Email: la.sales@mcmaster.com

by "McMaster-Carr" <la.sales@mcmaster.com> - 09:02 - 20 Feb 2026

RE: Your DATRON CNC Milling Tools order has been received!

Hi Lorena,

I will let @Datron AR speak to the status of the refund!

Thank You!

Erin King | Customer Service Specialist

erin.king@datron.com | 603-215-5861

From: Lorena <info@turnpack.com>
Sent: Thursday, February 19, 2026 7:30 PM
To: Datron Tooling <tools@datron.com>; Datron AR <AR@datron.com>
Cc: Sarina Hasler-Diamond <Sarina.Diamond@Datron.com>
Subject: RE: Your DATRON CNC Milling Tools order has been received!

Any update on the request for a refund? Credit its about 3 years old now and since we didn’t know of the credit we have been purchasing online. Easier for our team to just get a refund. Thank you for your time, Lorena Carrillo From: Datron Too

Any update on the request for a refund? Credit its about 3 years old now and since we didn’t know of the credit we have been purchasing online. Easier for our team to just get a refund.

Thank you for your time,

Lorena Carrillo

From: Datron Tooling <tools@datron.com>
Sent: Wednesday, February 11, 2026 8:38 AM
To: Info at Turnpack <info@turnpack.com>; Datron Tooling <tools@datron.com>; Datron AR <AR@datron.com>
Cc: Sarina Hasler-Diamond <Sarina.Diamond@Datron.com>
Subject: RE: Your DATRON CNC Milling Tools order has been received!

Hi Lorena,

The credit has been open since 2023.

Since there are two systems (an online account and your main account), I am not sure how that process works. I am going to loop back in @Datron AR, who can work on this request. We should have more information for you by the end of the week.

We appreciate your patience as we work through this.

Thank You!

Erin King | Customer Service Specialist

erin.king@datron.com | 603-215-5861

From: Info at Turnpack <info@turnpack.com>
Sent: Wednesday, February 11, 2026 10:02 AM
To: Datron Tooling <tools@datron.com>
Cc: Sarina Hasler-Diamond <Sarina.Diamond@Datron.com>
Subject: Re: Your DATRON CNC Milling Tools order has been received!

Could you please just simply issue a refund check then? We dont order than often. I honestly wasn't even aware of the credit i don't see anything on our account and look like we've been paying with credit card. An employee mentioned it s

Could you please just simply issue a refund check then? We dont order than often.

I honestly wasn't even aware of the credit i don't see anything on our account and look like we've been paying with credit card.

An employee mentioned it so I asked.

How old is the credit?

Respectfully,
Lorena Carrillo

On Wed, Feb 11, 2026, 7:22 AM Datron Tooling <tools@datron.com> wrote:

Good Morning,

All online orders are paid via Credit Card; so, since the below order has already been paid and processed, we are unable to apply the credit. However, in the future, please add needed items to your cart, and email the cart to Tools@Datron.com (do not check out), and we can manually process the order and apply the credit on your account.

I hope this helps!

Thank You!

Erin King | Customer Service Specialist

erin.king@datron.com | 603-215-5861

From: Info at Turnpack <info@turnpack.com>
Sent: Wednesday, February 11, 2026 8:32 AM
To: Sarina Hasler-Diamond <Sarina.Diamond@Datron.com>
Cc: Datron Tooling <tools@datron.com>; Datron AR <AR@datron.com>
Subject: Re: Your DATRON CNC Milling Tools order has been received!

Great the order is actually already below. Does that work? Respectfully, Lorena Carrillo On Wed, Feb 11, 2026, 6:23 AM Sarina Hasler-Diamond < Sarina.Diamond@datron.com > wrote: Hi Lorena, I checked your account and yes, you have $1,062.74 of a credit o

Warning: Unusual sender <info@turnpack.com>
You don't usually receive emails from this address. Make sure you trust this sender before taking any actions.

Great the order is actually already below. Does that work?

Respectfully,
Lorena Carrillo

On Wed, Feb 11, 2026, 6:23 AM Sarina Hasler-Diamond <Sarina.Diamond@datron.com> wrote:

Hi Lorena,

I checked your account and yes, you have $1,062.74 of a credit on the books. If you wish to use this credit for tools/consumables in the future, please email your order to tools@datron.com and we will apply the credit to the open invoice.

Thank you!

Kindly,

Sarina Hasler-Diamond | Customer Account Manager

Sarina.diamond@datron.com | 603-215-5871

From: Lorena <info@turnpack.com>
Sent: Tuesday, February 10, 2026 10:13 PM
To: Sarina Hasler-Diamond <Sarina.Diamond@Datron.com>
Subject: FW: Your DATRON CNC Milling Tools order has been received!

Hello could you please see if we have a credit on the account? I was told we bought a CNC machine and may have a credit remaining Thank you for your time, Lorena Carrillo From: DATRON Dynamics < orders@datron.com > Sent: Tuesday, February 10, 2026

Warning: Unusual sender <info@turnpack.com>
You don't usually receive emails from this address. Make sure you trust this sender before taking any actions.

Hello could you please see if we have a credit on the account? I was told we bought a CNC machine and may have a credit remaining

Thank you for your time,

Lorena Carrillo

From: DATRON Dynamics <orders@datron.com>
Sent: Tuesday, February 10, 2026 6:52 PM
To: info@turnpack.com
Subject: Your DATRON CNC Milling Tools order has been received!

Thank you for your order

Hi Christopher,

Just to let you know — we’ve received your order, and it is now being processed.

Here’s a reminder of what you’ve ordered:

Order summary
Order #24957 (February 10, 2026)

Product

Quantity

Price

Vacuum Cards

Card Size: Standard Vacuum Card 500mm x 400mm x 0.7mm
QTY: 50 Sheets per box
Tariff Surcharge: $27.60

×1

$230.00

VacuCard boxes have a $35 flat-rate shipping fee

Subtotal:

$230.00

Shipping: Flat rate

$35.00

Tariff Surcharge:

$27.60

Tax:

$0.00

Total:

$292.60

Payment method:

Credit Card

Billing address

Christopher Berger
Turnpack
22425 S Scotland Ct
Suite 104
Queen Creek, AZ 85140
4803311878
info@turnpack.com

Shipping address

Christopher Berger
Turnpack
22425 S Scotland Ct
Suite 104
Queen Creek, AZ 85140

Thanks for using shop.datron.com!
*Please note that items shipped from separate warehouses may arrive in multiple packages.

DATRON CNC Milling Tools — https://shop.datron.com/

Read our tool refund and returns policy

by Casey Howrilka - 04:37 - 20 Feb 2026

4 attachments 4 attachments

2 replies 2 replies

RE: Your DATRON CNC Milling Tools order has been received!

Hi Lorena

Can you please confirm the mailing address?

Best wishes,

Christina Gelinas | Controller

christina.gelinas@datron.com | 603-215-5846

From: Info at Turnpack <info@turnpack.com>
Sent: Friday, February 20, 2026 4:50 PM
To: Datron AR <AR@datron.com>
Cc: Datron Tooling <tools@datron.com>; Sarina Hasler-Diamond <Sarina.Diamond@Datron.com>
Subject: Re: Your DATRON CNC Milling Tools order has been received!

Since we have had the credit since 2023 yes, that was my request. It doesnt look like we purchase often and when we have, it has been on the website so our credit wasn't used, if I understand correctly. Respectfully, Lorena Carrillo On Fri, Feb 20, 2

Since we have had the credit since 2023 yes, that was my request.

It doesnt look like we purchase often and when we have, it has been on the website so our credit wasn't used, if I understand correctly.

Respectfully,
Lorena Carrillo

On Fri, Feb 20, 2026, 2:47 PM Datron AR <AR@datron.com> wrote:

Hi Lorena,

Just to clarify, are you looking to get a refund for the total credit on your account, which is $770.14?

Best wishes,

Christina Gelinas | Controller

christina.gelinas@datron.com | 603-215-5846

From: Datron Tooling <tools@datron.com>
Sent: Friday, February 20, 2026 4:34 PM
To: Lorena <info@turnpack.com>; Datron Tooling <tools@datron.com>; Datron AR <AR@datron.com>
Cc: Sarina Hasler-Diamond <Sarina.Diamond@Datron.com>
Subject: RE: Your DATRON CNC Milling Tools order has been received!

Hi Lorena,

I will let @Datron AR speak to the status of the refund!

Thank You!

Erin King | Customer Service Specialist

erin.king@datron.com | 603-215-5861

From: Lorena <info@turnpack.com>
Sent: Thursday, February 19, 2026 7:30 PM
To: Datron Tooling <tools@datron.com>; Datron AR <AR@datron.com>
Cc: Sarina Hasler-Diamond <Sarina.Diamond@Datron.com>
Subject: RE: Your DATRON CNC Milling Tools order has been received!

Any update on the request for a refund? Credit its about 3 years old now and since we didn’t know of the credit we have been purchasing online. Easier for our team to just get a refund. Thank you for your time, Lorena Carrillo From: Datron Too

External sender <info@turnpack.com>
Make sure you trust this sender before taking any actions.

Any update on the request for a refund? Credit its about 3 years old now and since we didn’t know of the credit we have been purchasing online. Easier for our team to just get a refund.

Thank you for your time,

Lorena Carrillo

From: Datron Tooling <tools@datron.com>
Sent: Wednesday, February 11, 2026 8:38 AM
To: Info at Turnpack <info@turnpack.com>; Datron Tooling <tools@datron.com>; Datron AR <AR@datron.com>
Cc: Sarina Hasler-Diamond <Sarina.Diamond@Datron.com>
Subject: RE: Your DATRON CNC Milling Tools order has been received!

Hi Lorena,

The credit has been open since 2023.

Since there are two systems (an online account and your main account), I am not sure how that process works. I am going to loop back in @Datron AR, who can work on this request. We should have more information for you by the end of the week.

We appreciate your patience as we work through this.

Thank You!

Erin King | Customer Service Specialist

erin.king@datron.com | 603-215-5861

From: Info at Turnpack <info@turnpack.com>
Sent: Wednesday, February 11, 2026 10:02 AM
To: Datron Tooling <tools@datron.com>
Cc: Sarina Hasler-Diamond <Sarina.Diamond@Datron.com>
Subject: Re: Your DATRON CNC Milling Tools order has been received!

Could you please just simply issue a refund check then? We dont order than often. I honestly wasn't even aware of the credit i don't see anything on our account and look like we've been paying with credit card. An employee mentioned it s

Warning: Unusual sender <info@turnpack.com>
You don't usually receive emails from this address. Make sure you trust this sender before taking any actions.

Could you please just simply issue a refund check then? We dont order than often.

I honestly wasn't even aware of the credit i don't see anything on our account and look like we've been paying with credit card.

An employee mentioned it so I asked.

How old is the credit?

Respectfully,
Lorena Carrillo

On Wed, Feb 11, 2026, 7:22 AM Datron Tooling <tools@datron.com> wrote:

Good Morning,

All online orders are paid via Credit Card; so, since the below order has already been paid and processed, we are unable to apply the credit. However, in the future, please add needed items to your cart, and email the cart to Tools@Datron.com (do not check out), and we can manually process the order and apply the credit on your account.

I hope this helps!

Thank You!

Erin King | Customer Service Specialist

erin.king@datron.com | 603-215-5861

From: Info at Turnpack <info@turnpack.com>
Sent: Wednesday, February 11, 2026 8:32 AM
To: Sarina Hasler-Diamond <Sarina.Diamond@Datron.com>
Cc: Datron Tooling <tools@datron.com>; Datron AR <AR@datron.com>
Subject: Re: Your DATRON CNC Milling Tools order has been received!

Great the order is actually already below. Does that work? Respectfully, Lorena Carrillo On Wed, Feb 11, 2026, 6:23 AM Sarina Hasler-Diamond < Sarina.Diamond@datron.com > wrote: Hi Lorena, I checked your account and yes, you have $1,062.74 of a credit o

Warning: Unusual sender <info@turnpack.com>
You don't usually receive emails from this address. Make sure you trust this sender before taking any actions.

Great the order is actually already below. Does that work?

Respectfully,
Lorena Carrillo

On Wed, Feb 11, 2026, 6:23 AM Sarina Hasler-Diamond <Sarina.Diamond@datron.com> wrote:

Hi Lorena,

I checked your account and yes, you have $1,062.74 of a credit on the books. If you wish to use this credit for tools/consumables in the future, please email your order to tools@datron.com and we will apply the credit to the open invoice.

Thank you!

Kindly,

Sarina Hasler-Diamond | Customer Account Manager

Sarina.diamond@datron.com | 603-215-5871

From: Lorena <info@turnpack.com>
Sent: Tuesday, February 10, 2026 10:13 PM
To: Sarina Hasler-Diamond <Sarina.Diamond@Datron.com>
Subject: FW: Your DATRON CNC Milling Tools order has been received!

Hello could you please see if we have a credit on the account? I was told we bought a CNC machine and may have a credit remaining Thank you for your time, Lorena Carrillo From: DATRON Dynamics < orders@datron.com > Sent: Tuesday, February 10, 2026

Warning: Unusual sender <info@turnpack.com>
You don't usually receive emails from this address. Make sure you trust this sender before taking any actions.

Hello could you please see if we have a credit on the account? I was told we bought a CNC machine and may have a credit remaining

Thank you for your time,

Lorena Carrillo

From: DATRON Dynamics <orders@datron.com>
Sent: Tuesday, February 10, 2026 6:52 PM
To: info@turnpack.com
Subject: Your DATRON CNC Milling Tools order has been received!

Thank you for your order

Hi Christopher,

Just to let you know — we’ve received your order, and it is now being processed.

Here’s a reminder of what you’ve ordered:

Order summary
Order #24957 (February 10, 2026)

Product

Quantity

Price

Vacuum Cards

Card Size: Standard Vacuum Card 500mm x 400mm x 0.7mm
QTY: 50 Sheets per box
Tariff Surcharge: $27.60

×1

$230.00

VacuCard boxes have a $35 flat-rate shipping fee

Subtotal:

$230.00

Shipping: Flat rate

$35.00

Tariff Surcharge:

$27.60

Tax:

$0.00

Total:

$292.60

Payment method:

Credit Card

Billing address

Christopher Berger
Turnpack
22425 S Scotland Ct
Suite 104
Queen Creek, AZ 85140
4803311878
info@turnpack.com

Shipping address

Christopher Berger
Turnpack
22425 S Scotland Ct
Suite 104
Queen Creek, AZ 85140

Thanks for using shop.datron.com!
*Please note that items shipped from separate warehouses may arrive in multiple packages.

DATRON CNC Milling Tools — https://shop.datron.com/

Read our tool refund and returns policy

by "Datron AR" <AR@datron.com> - 08:47 - 24 Feb 2026

2 replies 2 replies

RE: Your DATRON CNC Milling Tools order has been received!

Hi Lorena,

I just wanted to check in since it looks like the check I sent hasn’t been deposited yet.

Best wishes,

Christina Gelinas | Controller

christina.gelinas@datron.com | 603-215-5846

From: Lorena <info@turnpack.com>
Sent: Tuesday, February 24, 2026 1:07 PM
To: Datron AR <AR@datron.com>
Subject: RE: Your DATRON CNC Milling Tools order has been received!

See below thank you Lorena Carrillo Office Manager Office: 480-331-1878 Line: 781-938-0069 22425 S Scotland Ct, Suite104, Queen Creek, AZ 85142 lcarrillo@turnpack.com | www.turnpack.com https://www.turnpack.com/midas-rework/delidder From: Datron A

See below thank you

Lorena Carrillo

Office Manager

Office: 480-331-1878
Line: 781-938-0069

22425 S Scotland Ct, Suite104, Queen Creek, AZ 85142

lcarrillo@turnpack.com | www.turnpack.com
https://www.turnpack.com/midas-rework/delidder

From: Datron AR <AR@datron.com>
Sent: Tuesday, February 24, 2026 6:45 AM
To: Info at Turnpack <info@turnpack.com>
Subject: RE: Your DATRON CNC Milling Tools order has been received!

Hi Lorena

Can you please confirm the mailing address?

Best wishes,

Christina Gelinas | Controller

christina.gelinas@datron.com | 603-215-5846

From: Info at Turnpack <info@turnpack.com>
Sent: Friday, February 20, 2026 4:50 PM
To: Datron AR <AR@datron.com>
Cc: Datron Tooling <tools@datron.com>; Sarina Hasler-Diamond <Sarina.Diamond@Datron.com>
Subject: Re: Your DATRON CNC Milling Tools order has been received!

Since we have had the credit since 2023 yes, that was my request. It doesnt look like we purchase often and when we have, it has been on the website so our credit wasn't used, if I understand correctly. Respectfully, Lorena Carrillo On Fri, Feb 20, 2

Since we have had the credit since 2023 yes, that was my request.

It doesnt look like we purchase often and when we have, it has been on the website so our credit wasn't used, if I understand correctly.

Respectfully,
Lorena Carrillo

On Fri, Feb 20, 2026, 2:47 PM Datron AR <AR@datron.com> wrote:

Hi Lorena,

Just to clarify, are you looking to get a refund for the total credit on your account, which is $770.14?

Best wishes,

Christina Gelinas | Controller

christina.gelinas@datron.com | 603-215-5846

From: Datron Tooling <tools@datron.com>
Sent: Friday, February 20, 2026 4:34 PM
To: Lorena <info@turnpack.com>; Datron Tooling <tools@datron.com>; Datron AR <AR@datron.com>
Cc: Sarina Hasler-Diamond <Sarina.Diamond@Datron.com>
Subject: RE: Your DATRON CNC Milling Tools order has been received!

Hi Lorena,

I will let @Datron AR speak to the status of the refund!

Thank You!

Erin King | Customer Service Specialist

erin.king@datron.com | 603-215-5861

From: Lorena <info@turnpack.com>
Sent: Thursday, February 19, 2026 7:30 PM
To: Datron Tooling <tools@datron.com>; Datron AR <AR@datron.com>
Cc: Sarina Hasler-Diamond <Sarina.Diamond@Datron.com>
Subject: RE: Your DATRON CNC Milling Tools order has been received!

Any update on the request for a refund? Credit its about 3 years old now and since we didn’t know of the credit we have been purchasing online. Easier for our team to just get a refund. Thank you for your time, Lorena Carrillo From: Datron Too

External sender <info@turnpack.com>
Make sure you trust this sender before taking any actions.

Any update on the request for a refund? Credit its about 3 years old now and since we didn’t know of the credit we have been purchasing online. Easier for our team to just get a refund.

Thank you for your time,

Lorena Carrillo

From: Datron Tooling <tools@datron.com>
Sent: Wednesday, February 11, 2026 8:38 AM
To: Info at Turnpack <info@turnpack.com>; Datron Tooling <tools@datron.com>; Datron AR <AR@datron.com>
Cc: Sarina Hasler-Diamond <Sarina.Diamond@Datron.com>
Subject: RE: Your DATRON CNC Milling Tools order has been received!

Hi Lorena,

The credit has been open since 2023.

Since there are two systems (an online account and your main account), I am not sure how that process works. I am going to loop back in @Datron AR, who can work on this request. We should have more information for you by the end of the week.

We appreciate your patience as we work through this.

Thank You!

Erin King | Customer Service Specialist

erin.king@datron.com | 603-215-5861

From: Info at Turnpack <info@turnpack.com>
Sent: Wednesday, February 11, 2026 10:02 AM
To: Datron Tooling <tools@datron.com>
Cc: Sarina Hasler-Diamond <Sarina.Diamond@Datron.com>
Subject: Re: Your DATRON CNC Milling Tools order has been received!

Could you please just simply issue a refund check then? We dont order than often. I honestly wasn't even aware of the credit i don't see anything on our account and look like we've been paying with credit card. An employee mentioned it s

Warning: Unusual sender <info@turnpack.com>
You don't usually receive emails from this address. Make sure you trust this sender before taking any actions.

Could you please just simply issue a refund check then? We dont order than often.

I honestly wasn't even aware of the credit i don't see anything on our account and look like we've been paying with credit card.

An employee mentioned it so I asked.

How old is the credit?

Respectfully,
Lorena Carrillo

On Wed, Feb 11, 2026, 7:22 AM Datron Tooling <tools@datron.com> wrote:

Good Morning,

All online orders are paid via Credit Card; so, since the below order has already been paid and processed, we are unable to apply the credit. However, in the future, please add needed items to your cart, and email the cart to Tools@Datron.com (do not check out), and we can manually process the order and apply the credit on your account.

I hope this helps!

Thank You!

Erin King | Customer Service Specialist

erin.king@datron.com | 603-215-5861

From: Info at Turnpack <info@turnpack.com>
Sent: Wednesday, February 11, 2026 8:32 AM
To: Sarina Hasler-Diamond <Sarina.Diamond@Datron.com>
Cc: Datron Tooling <tools@datron.com>; Datron AR <AR@datron.com>
Subject: Re: Your DATRON CNC Milling Tools order has been received!

Great the order is actually already below. Does that work? Respectfully, Lorena Carrillo On Wed, Feb 11, 2026, 6:23 AM Sarina Hasler-Diamond < Sarina.Diamond@datron.com > wrote: Hi Lorena, I checked your account and yes, you have $1,062.74 of a credit o

Warning: Unusual sender <info@turnpack.com>
You don't usually receive emails from this address. Make sure you trust this sender before taking any actions.

Great the order is actually already below. Does that work?

Respectfully,
Lorena Carrillo

On Wed, Feb 11, 2026, 6:23 AM Sarina Hasler-Diamond <Sarina.Diamond@datron.com> wrote:

Hi Lorena,

I checked your account and yes, you have $1,062.74 of a credit on the books. If you wish to use this credit for tools/consumables in the future, please email your order to tools@datron.com and we will apply the credit to the open invoice.

Thank you!

Kindly,

Sarina Hasler-Diamond | Customer Account Manager

Sarina.diamond@datron.com | 603-215-5871

From: Lorena <info@turnpack.com>
Sent: Tuesday, February 10, 2026 10:13 PM
To: Sarina Hasler-Diamond <Sarina.Diamond@Datron.com>
Subject: FW: Your DATRON CNC Milling Tools order has been received!

Hello could you please see if we have a credit on the account? I was told we bought a CNC machine and may have a credit remaining Thank you for your time, Lorena Carrillo From: DATRON Dynamics < orders@datron.com > Sent: Tuesday, February 10, 2026

Warning: Unusual sender <info@turnpack.com>
You don't usually receive emails from this address. Make sure you trust this sender before taking any actions.

Hello could you please see if we have a credit on the account? I was told we bought a CNC machine and may have a credit remaining

Thank you for your time,

Lorena Carrillo

From: DATRON Dynamics <orders@datron.com>
Sent: Tuesday, February 10, 2026 6:52 PM
To: info@turnpack.com
Subject: Your DATRON CNC Milling Tools order has been received!

Thank you for your order

Hi Christopher,

Just to let you know — we’ve received your order, and it is now being processed.

Here’s a reminder of what you’ve ordered:

Order summary
Order #24957 (February 10, 2026)

Product

Quantity

Price

Vacuum Cards

Card Size: Standard Vacuum Card 500mm x 400mm x 0.7mm
QTY: 50 Sheets per box
Tariff Surcharge: $27.60

×1

$230.00

VacuCard boxes have a $35 flat-rate shipping fee

Subtotal:

$230.00

Shipping: Flat rate

$35.00

Tariff Surcharge:

$27.60

Tax:

$0.00

Total:

$292.60

Payment method:

Credit Card

Billing address

Christopher Berger
Turnpack
22425 S Scotland Ct
Suite 104
Queen Creek, AZ 85140
4803311878
info@turnpack.com

Shipping address

Christopher Berger
Turnpack
22425 S Scotland Ct
Suite 104
Queen Creek, AZ 85140

Thanks for using shop.datron.com!
*Please note that items shipped from separate warehouses may arrive in multiple packages.

DATRON CNC Milling Tools — https://shop.datron.com/

Read our tool refund and returns policy

by "Datron AR" <AR@datron.com> - 10:06 - 30 Mar 2026

6 attachments 6 attachments

RE: Your DATRON CNC Milling Tools order has been received!

Thank you 😊

Best wishes,

Christina Gelinas | Controller

christina.gelinas@datron.com | 603-215-5846

From: Lorena <info@turnpack.com>
Sent: Tuesday, February 24, 2026 1:07 PM
To: Datron AR <AR@datron.com>
Subject: RE: Your DATRON CNC Milling Tools order has been received!

See below thank you Lorena Carrillo Office Manager Office: 480-331-1878 Line: 781-938-0069 22425 S Scotland Ct, Suite104, Queen Creek, AZ 85142 lcarrillo@turnpack.com | www.turnpack.com https://www.turnpack.com/midas-rework/delidder From: Datron A

See below thank you

Lorena Carrillo

Office Manager

Office: 480-331-1878
Line: 781-938-0069

22425 S Scotland Ct, Suite104, Queen Creek, AZ 85142

lcarrillo@turnpack.com | www.turnpack.com
https://www.turnpack.com/midas-rework/delidder

From: Datron AR <AR@datron.com>
Sent: Tuesday, February 24, 2026 6:45 AM
To: Info at Turnpack <info@turnpack.com>
Subject: RE: Your DATRON CNC Milling Tools order has been received!

Hi Lorena

Can you please confirm the mailing address?

Best wishes,

Christina Gelinas | Controller

christina.gelinas@datron.com | 603-215-5846

From: Info at Turnpack <info@turnpack.com>
Sent: Friday, February 20, 2026 4:50 PM
To: Datron AR <AR@datron.com>
Cc: Datron Tooling <tools@datron.com>; Sarina Hasler-Diamond <Sarina.Diamond@Datron.com>
Subject: Re: Your DATRON CNC Milling Tools order has been received!

Since we have had the credit since 2023 yes, that was my request. It doesnt look like we purchase often and when we have, it has been on the website so our credit wasn't used, if I understand correctly. Respectfully, Lorena Carrillo On Fri, Feb 20, 2

Since we have had the credit since 2023 yes, that was my request.

It doesnt look like we purchase often and when we have, it has been on the website so our credit wasn't used, if I understand correctly.

Respectfully,
Lorena Carrillo

On Fri, Feb 20, 2026, 2:47 PM Datron AR <AR@datron.com> wrote:

Hi Lorena,

Just to clarify, are you looking to get a refund for the total credit on your account, which is $770.14?

Best wishes,

Christina Gelinas | Controller

christina.gelinas@datron.com | 603-215-5846

From: Datron Tooling <tools@datron.com>
Sent: Friday, February 20, 2026 4:34 PM
To: Lorena <info@turnpack.com>; Datron Tooling <tools@datron.com>; Datron AR <AR@datron.com>
Cc: Sarina Hasler-Diamond <Sarina.Diamond@Datron.com>
Subject: RE: Your DATRON CNC Milling Tools order has been received!

Hi Lorena,

I will let @Datron AR speak to the status of the refund!

Thank You!

Erin King | Customer Service Specialist

erin.king@datron.com | 603-215-5861

From: Lorena <info@turnpack.com>
Sent: Thursday, February 19, 2026 7:30 PM
To: Datron Tooling <tools@datron.com>; Datron AR <AR@datron.com>
Cc: Sarina Hasler-Diamond <Sarina.Diamond@Datron.com>
Subject: RE: Your DATRON CNC Milling Tools order has been received!

Any update on the request for a refund? Credit its about 3 years old now and since we didn’t know of the credit we have been purchasing online. Easier for our team to just get a refund. Thank you for your time, Lorena Carrillo From: Datron Too

External sender <info@turnpack.com>
Make sure you trust this sender before taking any actions.

Any update on the request for a refund? Credit its about 3 years old now and since we didn’t know of the credit we have been purchasing online. Easier for our team to just get a refund.

Thank you for your time,

Lorena Carrillo

From: Datron Tooling <tools@datron.com>
Sent: Wednesday, February 11, 2026 8:38 AM
To: Info at Turnpack <info@turnpack.com>; Datron Tooling <tools@datron.com>; Datron AR <AR@datron.com>
Cc: Sarina Hasler-Diamond <Sarina.Diamond@Datron.com>
Subject: RE: Your DATRON CNC Milling Tools order has been received!

Hi Lorena,

The credit has been open since 2023.

Since there are two systems (an online account and your main account), I am not sure how that process works. I am going to loop back in @Datron AR, who can work on this request. We should have more information for you by the end of the week.

We appreciate your patience as we work through this.

Thank You!

Erin King | Customer Service Specialist

erin.king@datron.com | 603-215-5861

From: Info at Turnpack <info@turnpack.com>
Sent: Wednesday, February 11, 2026 10:02 AM
To: Datron Tooling <tools@datron.com>
Cc: Sarina Hasler-Diamond <Sarina.Diamond@Datron.com>
Subject: Re: Your DATRON CNC Milling Tools order has been received!

Could you please just simply issue a refund check then? We dont order than often. I honestly wasn't even aware of the credit i don't see anything on our account and look like we've been paying with credit card. An employee mentioned it s

Warning: Unusual sender <info@turnpack.com>
You don't usually receive emails from this address. Make sure you trust this sender before taking any actions.

Could you please just simply issue a refund check then? We dont order than often.

I honestly wasn't even aware of the credit i don't see anything on our account and look like we've been paying with credit card.

An employee mentioned it so I asked.

How old is the credit?

Respectfully,
Lorena Carrillo

On Wed, Feb 11, 2026, 7:22 AM Datron Tooling <tools@datron.com> wrote:

Good Morning,

All online orders are paid via Credit Card; so, since the below order has already been paid and processed, we are unable to apply the credit. However, in the future, please add needed items to your cart, and email the cart to Tools@Datron.com (do not check out), and we can manually process the order and apply the credit on your account.

I hope this helps!

Thank You!

Erin King | Customer Service Specialist

erin.king@datron.com | 603-215-5861

From: Info at Turnpack <info@turnpack.com>
Sent: Wednesday, February 11, 2026 8:32 AM
To: Sarina Hasler-Diamond <Sarina.Diamond@Datron.com>
Cc: Datron Tooling <tools@datron.com>; Datron AR <AR@datron.com>
Subject: Re: Your DATRON CNC Milling Tools order has been received!

Great the order is actually already below. Does that work? Respectfully, Lorena Carrillo On Wed, Feb 11, 2026, 6:23 AM Sarina Hasler-Diamond < Sarina.Diamond@datron.com > wrote: Hi Lorena, I checked your account and yes, you have $1,062.74 of a credit o

Warning: Unusual sender <info@turnpack.com>
You don't usually receive emails from this address. Make sure you trust this sender before taking any actions.

Great the order is actually already below. Does that work?

Respectfully,
Lorena Carrillo

On Wed, Feb 11, 2026, 6:23 AM Sarina Hasler-Diamond <Sarina.Diamond@datron.com> wrote:

Hi Lorena,

I checked your account and yes, you have $1,062.74 of a credit on the books. If you wish to use this credit for tools/consumables in the future, please email your order to tools@datron.com and we will apply the credit to the open invoice.

Thank you!

Kindly,

Sarina Hasler-Diamond | Customer Account Manager

Sarina.diamond@datron.com | 603-215-5871

From: Lorena <info@turnpack.com>
Sent: Tuesday, February 10, 2026 10:13 PM
To: Sarina Hasler-Diamond <Sarina.Diamond@Datron.com>
Subject: FW: Your DATRON CNC Milling Tools order has been received!

Hello could you please see if we have a credit on the account? I was told we bought a CNC machine and may have a credit remaining Thank you for your time, Lorena Carrillo From: DATRON Dynamics < orders@datron.com > Sent: Tuesday, February 10, 2026

Warning: Unusual sender <info@turnpack.com>
You don't usually receive emails from this address. Make sure you trust this sender before taking any actions.

Hello could you please see if we have a credit on the account? I was told we bought a CNC machine and may have a credit remaining

Thank you for your time,

Lorena Carrillo

From: DATRON Dynamics <orders@datron.com>
Sent: Tuesday, February 10, 2026 6:52 PM
To: info@turnpack.com
Subject: Your DATRON CNC Milling Tools order has been received!

Thank you for your order

Hi Christopher,

Just to let you know — we’ve received your order, and it is now being processed.

Here’s a reminder of what you’ve ordered:

Order summary
Order #24957 (February 10, 2026)

Product

Quantity

Price

Vacuum Cards

Card Size: Standard Vacuum Card 500mm x 400mm x 0.7mm
QTY: 50 Sheets per box
Tariff Surcharge: $27.60

×1

$230.00

VacuCard boxes have a $35 flat-rate shipping fee

Subtotal:

$230.00

Shipping: Flat rate

$35.00

Tariff Surcharge:

$27.60

Tax:

$0.00

Total:

$292.60

Payment method:

Credit Card

Billing address

Christopher Berger
Turnpack
22425 S Scotland Ct
Suite 104
Queen Creek, AZ 85140
4803311878
info@turnpack.com

Shipping address

Christopher Berger
Turnpack
22425 S Scotland Ct
Suite 104
Queen Creek, AZ 85140

Thanks for using shop.datron.com!
*Please note that items shipped from separate warehouses may arrive in multiple packages.

DATRON CNC Milling Tools — https://shop.datron.com/

Read our tool refund and returns policy

by "Datron AR" <AR@datron.com> - 02:21 - 24 Feb 2026

6 attachments 6 attachments

RE: Your DATRON CNC Milling Tools order has been received!

Hi Lorena,

Of course, I’ll take care of writing a check for $770.14 this week.

Best wishes,

Christina Gelinas | Controller

christina.gelinas@datron.com | 603-215-5846

From: Info at Turnpack <info@turnpack.com>
Sent: Friday, February 20, 2026 4:50 PM
To: Datron AR <AR@datron.com>
Cc: Datron Tooling <tools@datron.com>; Sarina Hasler-Diamond <Sarina.Diamond@Datron.com>
Subject: Re: Your DATRON CNC Milling Tools order has been received!

Since we have had the credit since 2023 yes, that was my request. It doesnt look like we purchase often and when we have, it has been on the website so our credit wasn't used, if I understand correctly. Respectfully, Lorena Carrillo On Fri, Feb 20, 2

Since we have had the credit since 2023 yes, that was my request.

It doesnt look like we purchase often and when we have, it has been on the website so our credit wasn't used, if I understand correctly.

Respectfully,
Lorena Carrillo

On Fri, Feb 20, 2026, 2:47 PM Datron AR <AR@datron.com> wrote:

Hi Lorena,

Just to clarify, are you looking to get a refund for the total credit on your account, which is $770.14?

Best wishes,

Christina Gelinas | Controller

christina.gelinas@datron.com | 603-215-5846

From: Datron Tooling <tools@datron.com>
Sent: Friday, February 20, 2026 4:34 PM
To: Lorena <info@turnpack.com>; Datron Tooling <tools@datron.com>; Datron AR <AR@datron.com>
Cc: Sarina Hasler-Diamond <Sarina.Diamond@Datron.com>
Subject: RE: Your DATRON CNC Milling Tools order has been received!

Hi Lorena,

I will let @Datron AR speak to the status of the refund!

Thank You!

Erin King | Customer Service Specialist

erin.king@datron.com | 603-215-5861

From: Lorena <info@turnpack.com>
Sent: Thursday, February 19, 2026 7:30 PM
To: Datron Tooling <tools@datron.com>; Datron AR <AR@datron.com>
Cc: Sarina Hasler-Diamond <Sarina.Diamond@Datron.com>
Subject: RE: Your DATRON CNC Milling Tools order has been received!

Any update on the request for a refund? Credit its about 3 years old now and since we didn’t know of the credit we have been purchasing online. Easier for our team to just get a refund. Thank you for your time, Lorena Carrillo From: Datron Too

External sender <info@turnpack.com>
Make sure you trust this sender before taking any actions.

Any update on the request for a refund? Credit its about 3 years old now and since we didn’t know of the credit we have been purchasing online. Easier for our team to just get a refund.

Thank you for your time,

Lorena Carrillo

From: Datron Tooling <tools@datron.com>
Sent: Wednesday, February 11, 2026 8:38 AM
To: Info at Turnpack <info@turnpack.com>; Datron Tooling <tools@datron.com>; Datron AR <AR@datron.com>
Cc: Sarina Hasler-Diamond <Sarina.Diamond@Datron.com>
Subject: RE: Your DATRON CNC Milling Tools order has been received!

Hi Lorena,

The credit has been open since 2023.

Since there are two systems (an online account and your main account), I am not sure how that process works. I am going to loop back in @Datron AR, who can work on this request. We should have more information for you by the end of the week.

We appreciate your patience as we work through this.

Thank You!

Erin King | Customer Service Specialist

erin.king@datron.com | 603-215-5861

From: Info at Turnpack <info@turnpack.com>
Sent: Wednesday, February 11, 2026 10:02 AM
To: Datron Tooling <tools@datron.com>
Cc: Sarina Hasler-Diamond <Sarina.Diamond@Datron.com>
Subject: Re: Your DATRON CNC Milling Tools order has been received!

Could you please just simply issue a refund check then? We dont order than often. I honestly wasn't even aware of the credit i don't see anything on our account and look like we've been paying with credit card. An employee mentioned it s

Warning: Unusual sender <info@turnpack.com>
You don't usually receive emails from this address. Make sure you trust this sender before taking any actions.

Could you please just simply issue a refund check then? We dont order than often.

I honestly wasn't even aware of the credit i don't see anything on our account and look like we've been paying with credit card.

An employee mentioned it so I asked.

How old is the credit?

Respectfully,
Lorena Carrillo

On Wed, Feb 11, 2026, 7:22 AM Datron Tooling <tools@datron.com> wrote:

Good Morning,

All online orders are paid via Credit Card; so, since the below order has already been paid and processed, we are unable to apply the credit. However, in the future, please add needed items to your cart, and email the cart to Tools@Datron.com (do not check out), and we can manually process the order and apply the credit on your account.

I hope this helps!

Thank You!

Erin King | Customer Service Specialist

erin.king@datron.com | 603-215-5861

From: Info at Turnpack <info@turnpack.com>
Sent: Wednesday, February 11, 2026 8:32 AM
To: Sarina Hasler-Diamond <Sarina.Diamond@Datron.com>
Cc: Datron Tooling <tools@datron.com>; Datron AR <AR@datron.com>
Subject: Re: Your DATRON CNC Milling Tools order has been received!

Great the order is actually already below. Does that work? Respectfully, Lorena Carrillo On Wed, Feb 11, 2026, 6:23 AM Sarina Hasler-Diamond < Sarina.Diamond@datron.com > wrote: Hi Lorena, I checked your account and yes, you have $1,062.74 of a credit o

Warning: Unusual sender <info@turnpack.com>
You don't usually receive emails from this address. Make sure you trust this sender before taking any actions.

Great the order is actually already below. Does that work?

Respectfully,
Lorena Carrillo

On Wed, Feb 11, 2026, 6:23 AM Sarina Hasler-Diamond <Sarina.Diamond@datron.com> wrote:

Hi Lorena,

I checked your account and yes, you have $1,062.74 of a credit on the books. If you wish to use this credit for tools/consumables in the future, please email your order to tools@datron.com and we will apply the credit to the open invoice.

Thank you!

Kindly,

Sarina Hasler-Diamond | Customer Account Manager

Sarina.diamond@datron.com | 603-215-5871

From: Lorena <info@turnpack.com>
Sent: Tuesday, February 10, 2026 10:13 PM
To: Sarina Hasler-Diamond <Sarina.Diamond@Datron.com>
Subject: FW: Your DATRON CNC Milling Tools order has been received!

Hello could you please see if we have a credit on the account? I was told we bought a CNC machine and may have a credit remaining Thank you for your time, Lorena Carrillo From: DATRON Dynamics < orders@datron.com > Sent: Tuesday, February 10, 2026

Warning: Unusual sender <info@turnpack.com>
You don't usually receive emails from this address. Make sure you trust this sender before taking any actions.

Hello could you please see if we have a credit on the account? I was told we bought a CNC machine and may have a credit remaining

Thank you for your time,

Lorena Carrillo

From: DATRON Dynamics <orders@datron.com>
Sent: Tuesday, February 10, 2026 6:52 PM
To: info@turnpack.com
Subject: Your DATRON CNC Milling Tools order has been received!

Thank you for your order

Hi Christopher,

Just to let you know — we’ve received your order, and it is now being processed.

Here’s a reminder of what you’ve ordered:

Order summary
Order #24957 (February 10, 2026)

Product

Quantity

Price

Vacuum Cards

Card Size: Standard Vacuum Card 500mm x 400mm x 0.7mm
QTY: 50 Sheets per box
Tariff Surcharge: $27.60

×1

$230.00

VacuCard boxes have a $35 flat-rate shipping fee

Subtotal:

$230.00

Shipping: Flat rate

$35.00

Tariff Surcharge:

$27.60

Tax:

$0.00

Total:

$292.60

Payment method:

Credit Card

Billing address

Christopher Berger
Turnpack
22425 S Scotland Ct
Suite 104
Queen Creek, AZ 85140
4803311878
info@turnpack.com

Shipping address

Christopher Berger
Turnpack
22425 S Scotland Ct
Suite 104
Queen Creek, AZ 85140

Thanks for using shop.datron.com!
*Please note that items shipped from separate warehouses may arrive in multiple packages.

DATRON CNC Milling Tools — https://shop.datron.com/

Read our tool refund and returns policy

by "Datron AR" <AR@datron.com> - 09:31 - 23 Feb 2026

4 attachments 4 attachments

Re: Turnpack, LLC Order (Ref PO26071602) [Case: 1704149]

Good afternoon.

Thank you for the order.

To proceed with your purchase order, please amend your PO to include the statement "Tariff Surcharge Acknowledged" and return it to us. This is necessary due to a 10% tariff surcharge that will be effective from June 9, 2025, on all new product orders and existing orders with a confirmed ship date on or after July 1, 2025. This surcharge, in accordance with our Terms and Conditions of Sale, addresses increased costs from recent U.S. tariff changes and will be itemized on all invoices, order acknowledgments, and new quotations.

Please note that this surcharge applies to all orders with delivery locations within the United States. We understand the impact of trade policy changes on your business and are committed to minimizing these effects. We will continue to monitor tariff-related policies and adjust pricing as needed.

Thank you for your understanding and continued partnership.

Thank you for choosing Omron. We appreciate your business and look forward to serving you again!

Best regards,

Jennifer P.

Customer Care Senior Specialist

Direct: US: 800.556.6766 CA:866.986.6766 | customercare@omron.com

Direct: MX/Latin America: 800 386 6766| mela@omron.com

Omron Automation Americas

automation.omron.com

This is a confidential message. If received in error, delete it and notify the sender.

On Thu, 19 Feb at 2:58 PM , Turnpack, LLC PO26031560 (SO2547975) <catchall@turnpack.com> wrote:

Dear Orders (Omron Automation Americas) Hi Nick i BCC'd you on this order Please find attached purchase order PO26071602 with reference: Feb 19, 2026 at 11:54 AM amounting in $ 819.98 [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏

Confirm PO26071602
$ 819.98 due 2/19/26

Dear Orders (Omron Automation Americas)

Hi Nick i BCC'd you on this order

Please find attached purchase order PO26071602 with reference: Feb 19, 2026 at 11:54 AM amounting in $ 819.98 from Turnpack, LLC as well as the resale certificate, for your review and action.

The receipt is expected for 02/25/2026, if this date is not achievable, please reply with an available date for reconsideration.

**Please acknowledge the receipt of this order and lead time.

Turnpack, LLC
+1 480-331-1878 | info@turnpack.com | https://www.turnpack.com

Powered by Odoo

1704149:2549832

by "Customer Care US/CA" <customercare@omron.com> - 03:31 - 20 Feb 2026

Re: Turnpack, LLC Order (Ref PO26071602) [Case: 1704149]

Good afternoon.

Thank you for the order.

To proceed with your purchase order, please amend your PO to include the statement "Tariff Surcharge Acknowledged" and return it to us. This is necessary due to a 10% tariff surcharge that will be effective from June 9, 2025, on all new product orders and existing orders with a confirmed ship date on or after July 1, 2025. This surcharge, in accordance with our Terms and Conditions of Sale, addresses increased costs from recent U.S. tariff changes and will be itemized on all invoices, order acknowledgments, and new quotations.

Please note that this surcharge applies to all orders with delivery locations within the United States. We understand the impact of trade policy changes on your business and are committed to minimizing these effects. We will continue to monitor tariff-related policies and adjust pricing as needed.

Thank you for your understanding and continued partnership.

Thank you for choosing Omron. We appreciate your business and look forward to serving you again!

Best regards,

Jennifer P.

Customer Care Senior Specialist

Direct: US: 800.556.6766 CA:866.986.6766 | customercare@omron.com

Direct: MX/Latin America: 800 386 6766| mela@omron.com

Omron Automation Americas

automation.omron.com

This is a confidential message. If received in error, delete it and notify the sender.

On Thu, 19 Feb at 2:58 PM , Turnpack, LLC PO26031560 (SO2547975) <catchall@turnpack.com> wrote:

Dear Orders (Omron Automation Americas) Hi Nick i BCC'd you on this order Please find attached purchase order PO26071602 with reference: Feb 19, 2026 at 11:54 AM amounting in $ 819.98 [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏

Confirm    PO26071602
$ 819.98 due 2/19/26

Dear Orders (Omron Automation Americas)

Hi Nick i BCC'd you on this order

Please find attached purchase order PO26071602 with reference: Feb 19, 2026 at 11:54 AM amounting in $ 819.98 from Turnpack, LLC as well as the resale certificate, for your review and action.

The receipt is expected for 02/25/2026, if this date is not achievable, please reply with an available date for reconsideration.

**Please acknowledge the receipt of this order and lead time.

Turnpack, LLC
+1 480-331-1878 | info@turnpack.com | https://www.turnpack.com

Powered by Odoo

1704149:2549832

by "Customer Care US/CA" <customercare@omron.com> - 03:27 - 20 Feb 2026

Supplier Experience when creating new ANIDs (EVC1910265)

SAP Communication

Release Readiness Communications

Supplier Experience when creating new ANIDs

Hello,

This notice is to inform the SAP Business Network supplier community that newly onboarded suppliers will see a new user experience. If you are signing up for another ANID in a new trading relationship, you will see a user interface that is different from your current view. There are no new features at this time except for usability improvements, as well as a visual overhaul with a new navigation interface that remains intuitive and self-explanatory.

Starting in December 2025, new suppliers to SAP Business Network (SBN) began onboarding onto SAP Business Network on SAP Business Technology Platform (BTP), introducing a new trading partner portal experience.

Use the language option at the top of this page to view this message in additional languages.

Who is impacted?

Standard and Enterprise supplier accounts.

Why are we making this change?

The integration of SAP Business Network with SAP BTP enhances usability, collaboration, scalability, and innovation, enabling businesses to adapt to changing market demands. Our ongoing transition to SAP BTP, a cloud-native architecture, is designed to optimize these capabilities.

Who is taking advantage of SBN NextGen Experience?

All walkup suppliers and suppliers invited by SAP Business Network Commerce Automation buyers will be on the SAP Business Network on SAP BTP experience.

What exactly is changing in this new supplier experience?

The new trading partner portal will have a modernized user interface. To learn more, see what’s changed here.

What are the benefits of this new experience for suppliers?

Moving to SAP Business Network on SAP BTP provides suppliers with a harmonized user experience across SAP solutions, along with improved performance, scalability, and flexibility. It delivers faster processing, stronger reliability, while also enabling deployment in new data centers to support regional requirements and expansion. Suppliers also benefit from extensible architecture that supports customization and future innovation.

Additional Resources for trading partners

Do not reply to this email as this mailbox is not monitored.

Thank you,
Release Readiness Team | SAP Business Network

IMPORTANT NOTE
This notice reflects SAP planning as of the date of this notice. SAP may change the features and release schedule at any time without notice and assumes no responsibility for errors or omissions. Nothing in this notice should be construed to represent any commitment by SAP to include any specific new features in any version of the SAP solutions. All dates in this communication are based on US Pacific Time.

Notice date: February 20, 2025

Product Name	Affected Entity
SAP Business Network	SAP Business Network for Suppliers

Questions

Please contact SAP Support by visiting Help Center.

Let's Run Better Together!
Your SAP Team

SAP SE | Dietmar-Hopp-Allee 16 | 69190 Walldorf | Germany
www.sap.com

This e-mail may contain trade secrets or privileged, undisclosed, or otherwise confidential information. If you have received this e-mail in error, you are hereby notified that any review, copying, or distribution of it is strictly prohibited. Please inform us immediately and destroy the original transmittal. Thank you for your cooperation.

You have received this notification because your email address, or a group email address that you belong to, is configured in an account on the SAP Business Network. To make changes, please update the Network Service Subscription by selecting settings and notifications within your profile to the top right. If you do not have access to your organization's account, please request assistance from your SAP Business Network Account Administrator or submit a request for assistance via Help Center.

To ensure you continue to receive SAP related information properly please add SAP CloudSupport Alerts sapcloudsupport@alerts.ondemand.com to your address book or safe senders list.

Copyright | Privacy | Legal Disclosure

by "SAP CloudSupport Alerts" <sapcloudsupport@alerts.ondemand.com> - 01:32 - 20 Feb 2026

Your UPS Package was delivered

UPS

Hi Christopher,

Your package was delivered.

From EO US OUTBOUND

Delivered

Friday 02/20/2026
11:20 AM

Track Your Package ›

UPS Next Day Air

1Z0695070125153525

Get More Control with UPS My Choice Premium

For only $19.99 a year, UPS My Choice® Premium members get unlimited delivery changes.

Upgrade to Premium

Get delivery updates by text and email.

Log in to update your preferences.

Please do not reply to this email.

Manage Delivery Alerts | Privacy Notice | Service Terms

by "UPS" <mcinfo@ups.com> - 01:32 - 20 Feb 2026

Re: PO 3047

Hi Lorena,

I still show it open. My requestor is on paternity leave so I would like to keep the balance of this order open if possible. I should be able to get you an answer by end of next week. What is the timeline when the balance can ship?

Thank you,

Dawn

Dawn Davis

Senior Supply Chain Specialist

t: 480-550-9702

a:

3200 W Germann Road

,

Chandler

Az

85286

From: Lorena <info@turnpack.com>
Sent: Thursday, February 19, 2026 6:16 PM
To: Dawn Davis <Dawn.davis@sarasmicro.com>
Subject: RE: PO 3047

Ok we will cancel on our end. Do do have it open but have been uable to source the remaining items.

Thank you for your time,

Lorena Carrillo

From: Dawn Davis <Dawn.davis@sarasmicro.com>
Sent: Tuesday, January 27, 2026 10:41 AM
To: info@turnpack.com
Subject: PO 3047

Hi Lorena,

It's been some time and wanted to follow up on the remaining items on the above PO. If you don't show this order open on your end, I will cancel the remaining balance on my end.

Thank you,

Dawn

Dawn Davis

Sr. Supply Chain Specialist

t: 480-550-9702

6 attachments 6 attachments

a:

3200 W Germann Road

,

Chandler

AZ

85286

by Dawn Davis - 01:27 - 20 Feb 2026

Re: PO 3047

Lorena,

Please continue to see if your able to source this part for this order. I am also going to find out if this is needed on our end since it is so old.

Thank you,

Dawn

Dawn Davis

Senior Supply Chain Specialist

t: 480-550-9702

a:

3200 W Germann Road

,

Chandler

Az

85286

From: Lorena <info@turnpack.com>
Sent: Friday, February 20, 2026 11:46 AM
To: Dawn Davis <Dawn.davis@sarasmicro.com>
Subject: RE: PO 3047

We have been unable to source the parts so I do no not have a definitive timeline but as soon as we do I will let you know.

Thank you for your time,

Lorena Carrillo

From: Dawn Davis <Dawn.davis@sarasmicro.com>
Sent: Friday, February 20, 2026 11:25 AM
To: Lorena <info@turnpack.com>
Subject: Re: PO 3047

Hi Lorena,

I still show it open. My requestor is on paternity leave so I would like to keep the balance of this order open if possible. I should be able to get you an answer by end of next week. What is the timeline when the balance can ship?

Thank you,

Dawn

Dawn Davis

Senior Supply Chain Specialist

t: 480-550-9702

a:

3200 W Germann Road

,

Chandler

Az

85286

From: Lorena <info@turnpack.com>
Sent: Thursday, February 19, 2026 6:16 PM
To: Dawn Davis <Dawn.davis@sarasmicro.com>
Subject: RE: PO 3047

Ok we will cancel on our end. Do do have it open but have been uable to source the remaining items.

Thank you for your time,

Lorena Carrillo

From: Dawn Davis <Dawn.davis@sarasmicro.com>
Sent: Tuesday, January 27, 2026 10:41 AM
To: info@turnpack.com
Subject: PO 3047

Hi Lorena,

It's been some time and wanted to follow up on the remaining items on the above PO. If you don't show this order open on your end, I will cancel the remaining balance on my end.

Thank you,

Dawn

Dawn Davis

Sr. Supply Chain Specialist

t: 480-550-9702

9 attachments 9 attachments

a:

3200 W Germann Road

,

Chandler

AZ

85286

by Dawn Davis - 06:46 - 23 Feb 2026

We’ve updated your estimated delivery date 888858192284

FedEx

We’ve updated the estimated delivery date of your shipment .

Scheduled delivery date

Mon 2/23/2026

Estimated between 11:30am and 3:30pm

Take more control of your shipments

Save delivery instructions, get picture proof of delivery, and more.

MANAGE DELIVERY

Some delivery options might not be available on the day of delivery.

Personal message

Your 3rd out of 6 installments of PO106501 has been shipped.

Tracking details

Tracking ID

888858192284

From

christopher berger
22425 S SCOTLAND CT
Suite 104
QUEEN CREEK, AZ, US
85142

To

Proteor USA
491 East 350 North
Gunnison, UT, US
84634

Ship date

Wed 2/18/2026 12:00 AM

Number of pieces

1

Total shipment weight

5.00 LB

Service

FedEx Ground

Reference

SO26031000

Invoice number

INV/2026/02/0006

Purchase order number

106501

TRACK SHIPMENT

Need to change delivery plans?

Redirect your package to a secure FedEx location for pickup—fast, easy, and convenient. Just enter your tracking number to get started.

GET STARTED

This tracking update has been requested by:

Company name

christopher berger

Name

Birch Manufacturing AZ

Email

info@turnpack.com

Please do not respond to this message. This email was sent from an unattended mailbox. This report was generated at approximately 11:42 AM CST 02/20/2026.

All weights are estimated.

To track the latest status of your shipment, click on the tracking number above.

Standard transit is the date and time the package is scheduled to be delivered by, based on the selected service, destination and ship date. Limitations and exceptions may apply. Please see the FedEx Service Guide for terms and conditions of service, including the FedEx Money-Back Guarantee, or contact your FedEx Customer Support representative.

Thank you for your business.

ID 1064

by "FedEx Tracking" <TrackingUpdates@fedex.com> - 12:46 - 20 Feb 2026

RE: Turnpack, LLC Quotation (Ref SO2548983) - Midas D5L6 de-lidder Quotation

Hello Christopher,

Can I receive a refreshed quotation for Quote No. SO2548983?

I believe I can get internal approval for the capital expenditure this quarter in 2026, but the quote expired 01/03/2026.

The options can be included as they are, but can you explain what the D4LTDS Datum Stop Assembly function is?

Thank you,

Todd Dean | Manufacturing Engineer | Crane Aerospace & Electronics

16706 13^th Ave West, Lynnwood, WA, 98037 | todd.dean@craneae.com | 425-895-4069 |

From: Chris Berger <notifications@turnpack.com>
Sent: Thursday, December 4, 2025 9:15 AM
To: Dean, Todd <Todd.Dean@craneae.com>
Subject: Turnpack, LLC Quotation (Ref SO2548983) - Midas D5L6 de-lidder Quotation

[WARNING - Externally Sent Email - Do not click any links or open attachments that are unexpected, even from apparent known senders. Call the sender if in doubt.]

Hello Todd, Thank you for your interest in upgrading to the Midas D5L6. Your quotation #{SO2548983}, totaling $42,644.00, is attached for review. If you have any questions about the [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏

Sign & Pay Quotation

SO2548983
$ 42,644.00
Expires on 01/03/2026

Hello Todd,

Thank you for your interest in upgrading to the Midas D5L6. Your quotation #{SO2548983}, totaling $42,644.00, is attached for review.

If you have any questions about the configuration, installation, or tooling options, I’m available to walk through the details. If you'd like us to validate the setup against your current parts, feel free to send over a couple of representative package photos or drawings—happy to confirm everything matches your application.

Let me know how you’d like to proceed.

Christopher Berger

Phone: +1 (480) 331-1878

Cell: +1 (480) 273-4686

cberger@turnpack.com | www.turnpack.com

Turnpack, LLC

+1 480-331-1878 | info@turnpack.com | https://www.turnpack.com

Powered by Odoo

by Todd Dean - 12:17 - 20 Feb 2026

RE: Turnpack, LLC Quotation (Ref SO2548983) - Midas D5L6 de-lidder Quotation

Hello Lorena,

Excellent. Thank you for the quick response!

Todd Dean | Manufacturing Engineer | Crane Aerospace & Electronics

16706 13^th Ave West, Lynnwood, WA, 98037 | todd.dean@craneae.com | 425-895-4069 |

From: Lorena <info@turnpack.com>
Sent: Friday, February 20, 2026 10:56 AM
To: Dean, Todd <Todd.Dean@craneae.com>; 'Turnpack, LLC SO2548983' <catchall@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO2548983) - Midas D5L6 de-lidder Quotation

[WARNING - Externally Sent Email - Do not click any links or open attachments that are unexpected, even from apparent known senders. Call the sender if in doubt.]

Hello Todd, I included the explanation on the quote and set the expiration date for the end of this quarter.

Please reach out should you have any questions.

Thank you for your time,

Lorena Carrillo

From: Dean, Todd <Todd.Dean@craneae.com>
Sent: Friday, February 20, 2026 10:16 AM
To: Turnpack, LLC SO2548983 <catchall@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO2548983) - Midas D5L6 de-lidder Quotation

Hello Christopher,

Can I receive a refreshed quotation for Quote No. SO2548983?

I believe I can get internal approval for the capital expenditure this quarter in 2026, but the quote expired 01/03/2026.

The options can be included as they are, but can you explain what the D4LTDS Datum Stop Assembly function is?

Thank you,

Todd Dean | Manufacturing Engineer | Crane Aerospace & Electronics

16706 13^th Ave West, Lynnwood, WA, 98037 | todd.dean@craneae.com | 425-895-4069 |

From: Chris Berger <notifications@turnpack.com>
Sent: Thursday, December 4, 2025 9:15 AM
To: Dean, Todd <Todd.Dean@craneae.com>
Subject: Turnpack, LLC Quotation (Ref SO2548983) - Midas D5L6 de-lidder Quotation

[WARNING - Externally Sent Email - Do not click any links or open attachments that are unexpected, even from apparent known senders. Call the sender if in doubt.]

Hello Todd, Thank you for your interest in upgrading to the Midas D5L6. Your quotation #{SO2548983}, totaling $42,644.00, is attached for review. If you have any questions about the [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏

Sign & Pay Quotation

SO2548983
$ 42,644.00
Expires on 01/03/2026

Hello Todd,

Thank you for your interest in upgrading to the Midas D5L6. Your quotation #{SO2548983}, totaling $42,644.00, is attached for review.

If you have any questions about the configuration, installation, or tooling options, I’m available to walk through the details. If you'd like us to validate the setup against your current parts, feel free to send over a couple of representative package photos or drawings—happy to confirm everything matches your application.

Let me know how you’d like to proceed.

Christopher Berger

Phone: +1 (480) 331-1878

Cell: +1 (480) 273-4686

cberger@turnpack.com | www.turnpack.com

Turnpack, LLC

+1 480-331-1878 | info@turnpack.com | https://www.turnpack.com

Powered by Odoo

by Todd Dean - 03:12 - 20 Feb 2026

Invoice #INV/2026/02/0007 is Approved to Pay by Intuitive

Powered by

Invoice #INV/2026/02/0007 is Approved to Pay by Intuitive

Hello Supplier,

Your Invoice #INV/2026/02/0007 has been approved to pay by your customer, Intuitive. No further action is required but you can click below for real time status or additional details.

If your customer's process is to mark the Invoice as 'Paid' in Coupa, you will get a notification at that time with instructions for payment details.

If you have any questions you can simply contact your customer through normal channels or enter a comment on the Invoice.

View Invoice

Never Miss an Invoice with Coupa

Orders

Invoices

Payments

Log In Now

Business Spend Management

by do_not_reply@intuitive.coupahost.com - 12:16 - 20 Feb 2026

Replay Available: Live! 1LMX Supplier Webinars

The series of the Live! 1LMX Supplier Webinars is now posted to the LMExternal Integration Hub (EIH)!

To watch each of the Webinars at any time, visit the LMExternal Integration Hub (EIH) > Training Guides.

The recordings are available in the section titled ‘Live! 1LMX Supplier Webinar’.

CSM Overview – Click here to view
EIH Overview – Click here to view
How to Create ASN – Click here to view
Invoicing – Click here to view
Review Purchase Order – Click here to view
Sourcing Projects – Coming soon! The recording is being processed.

Questions?

If you have any questions or need assistance please contact us at Supplier.Onboarding.1LMX@lmco.com. 

Thank you for your cooperation and collaboration as we continue our Lockheed Martin OneLM Transformation (1LMX).

Kind Regards,

Lockheed Martin Supplier Enablement Team

Text

AI-generated content may be incorrect.  

by "1LMX, Supplier Onboarding" <supplier.onboarding.1lmx@lmco.com> - 12:11 - 20 Feb 2026