Info Inbox

Hi Jeff! Thank you for the update. We do not use UPS only Fedex. Could you please either supply a fedex account or send a label we can use? 

Respectfully,
Lorena Carrillo

Hi All,

 

The parts went out today. Tracking number: 1Z8563AR0393655535.

 

I am out of office for the next week so you can have the parts for about a week. If you could please ship back the PParts by the beginning of next week that would be appreciated. The other components can be held onto. Please use UPS 8563AR to return the parts to my attention and the address in my signature. I will have some email if you have any questions or want to hop on a quick call.

 

Thanks!

 

Jeff Galli
Sr. Process Development Engineer

 

TELEDYNE FLIR OEM

Upcoming out of office: June 18-22, July 1-8

 

 

Teledyne Confidential; Commercially Sensitive Business Data

 

From: Keith Chalman <keith@cti-rep.com>
Sent: Tuesday, June 30, 2026 10:39 AM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>; Info at Turnpack <info@turnpack.com>
Cc: Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote

 

External Email

Hi Jeff,

 

Please send to:

 

Chris Berger

Turnpack

22425 S Scotland Ct, Suite 104

Queen Creek, AZ 85142

 

p: 480-648-4686    

c: 480-273-4686

 

Let us know if there are further questions.

 

Best Regards,

 

Keith Chalman

President - Chalman Technologies

   e keith@cti-rep.com

   c (714) 412-5411

    a 3150 E. La Palma Ave. Suite K, Anaheim, CA 92806

Manufacturer's Representative for:

(entire principal list at www.cti-rep.com)

 

 

 

From: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Sent: Tuesday, June 30, 2026 9:51 AM
To: Info at Turnpack <info@turnpack.com>; Keith Chalman <keith@cti-rep.com>
Cc: Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote

 

Can you confirm the address to ship the parts? I am trying to get them out today.

 

Thanks,

 

Jeff Galli
Sr. Process Development Engineer

 

TELEDYNE FLIR OEM

Upcoming out of office: June 18-22, July 1-8

 

 

Teledyne Confidential; Commercially Sensitive Business Data

 

From: Galli, Jeff (US)
Sent: Thursday, June 18, 2026 9:15 AM
To: Info at Turnpack <info@turnpack.com>; Keith Chalman <keith@cti-rep.com>
Cc: Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote

 

Good morning

 

Yes I have been getting some things ready. Trying to build ahead a bit so we can be down a set of pparts because all the ones we have we use weekly for production. Hoping to be able to send them all next week. The part we will need back within a week or so, the boats and parts can be kept for longer. 

Sent from Workspace ONE Boxer

 

On Jun 17, 2026 4:18 PM, Keith Chalman <keith@cti-rep.com> wrote:

External Email

Hi Jeff,

 

I just wanted to check in to see if you've had a chance to get us the boats and p-parts question mark.

 

Let us know.

 

Keith

From: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Sent: Friday, June 5, 2026 7:57 AM
To: Info at Turnpack <info@turnpack.com>
Cc: Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote

 

Hi Chris,

 

Sounds good. I like the option for magnets or bolts if needed.

 

Good point about the ID axis. On the current systems there are two indexes because of the length of boats. We have a single index at the main but I know it has always been close.

 

I will work on getting some parts to sent out to you. I might have some older PParts that aren’t used for production that can be sent, otherwise we would need a quick turnaround on the PParts but the boats and other parts could be held on for longer. I’ll try to get those out next week.

 

If you have some preliminary designs to show I’d be interested in jumping on another quick call just to see them or if it would help clear up any other issues.

 

Thanks and hope you have a great weekend!

 

Jeff Galli
Sr. Process Development Engineer

 

TELEDYNE FLIR OEM

Upcoming out of office: June 18-22, July 1-8

 

 

Teledyne Confidential; Commercially Sensitive Business Data

 

From: Info at Turnpack <info@turnpack.com>
Sent: Thursday, June 4, 2026 4:24 PM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Cc: Keith Chalman <keith@cti-rep.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote

 

External Email

Hi Jeff,

 

Yes, the plan is to use magnets for the top plates instead of bolts. If you want we can use both magnets and bolts, leaving you the option of whether to use the bolts. The 3 boat designs you provided (Boson, BS8X and Tura) should all operate within the envelope of the machine. One item we flagged is that the center to center distance from the first to the last pocket is just under 12" of travel. Depending on the machine configuration with an ID axis the main axis travel can be limited to 10". Can you confirm that there are no existing travel issues with the boat designs you have provided?

 

What would be very helpful is to have a physical sample of each boat and part, along with the design files. Ideally, you could send us one p-part set for 1-day so we can review the existing design and prevent surprises.

 

 If it makes sense we could jump on another 30min call to confirm a few things and walk through the models you provided.

 

Chris

 

On Tue, Jun 2, 2026 at 10:59 AM Galli, Jeff (US) <Jeff.Galli@teledyne.com> wrote:

Hi Keith and Chris,

 

For the PParts is it possible to have them in/out with magnets and not have to move the track once the base is set? Were you able to stop the boats in the correct position even with the change in the part and boat sizes? For the boson part we have 2 different board sizes (boats are the same), do you need to take a look at that board as well or we can copy the interface of the PPart we are using now?

 

If that all looks good I will probably go ahead and order. I’m thinking what we will need is:

1x ID Base

4x Main Base

4x Main insert – Boson

2x Main insert – Tura

2x Main insert - BosonHD

1x ID insert - BosonHD

 

Thanks,

 

Jeff Galli
Sr. Process Development Engineer

 

TELEDYNE FLIR OEM

Upcoming out of office: June 18-22, July 1-8

 

 

Teledyne Confidential; Commercially Sensitive Business Data

 

From: Keith Chalman <keith@cti-rep.com>
Sent: Monday, June 1, 2026 3:40 PM
To: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>; Turnpack, LLC SO26201063 <catchall@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote

 

External Email

Hi Jeff,

 

Just checking to see if you have any questions on that quote Chris sent?  Attached again here.

 

Let us know.

 

Best Regards,

 

Keith Chalman

President - Chalman Technologies

   e keith@cti-rep.com

   c (714) 412-5411

    a 3150 E. La Palma Ave. Suite K, Anaheim, CA 92806

Manufacturer's Representative for:

(entire principal list at www.cti-rep.com)

 

 

 

From: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Sent: Tuesday, May 26, 2026 6:52 PM
To: Turnpack, LLC SO26201063 <catchall@turnpack.com>; Keith Chalman <keith@cti-rep.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote

 

Hi Chris and Keith,

 

Thanks for the quote. I will review it and organize my thoughts a bit and let you know if I have any questions by the end of the week.

 

Hope you enjoyed your long weekend!

 

Jeff Galli
Sr. Process Development Engineer

 

TELEDYNE FLIR OEM

Upcoming out of office: May 14-18

 

 

Teledyne Confidential; Commercially Sensitive Business Data

 

From: Chris Berger <info@turnpack.com>
Sent: Tuesday, May 26, 2026 7:23 AM
To: Jeff Galli <jeff.galli@teledyneflir.com>
Subject: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote

 

External Email

Hi Jeff, Attached is the quote for the split p-part bonding inserts for the 3 products for 1 machine. Let me know if you have any questions. If [...] ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​ ͏ ​

Sign & Pay Quotation    SO26201063 $ 21,150.00 Expires on 06/21/2026

Hi Jeff,

 

Attached is the quote for the split p-part bonding inserts for the 3 products for 1 machine. Let me know if you have any questions.

 

If you intend to move forward it would be best if you could send us boats and possibly some parts as well just to make sure clearance is not going to be an issue.

 

Chris

Christopher Berger

Phone: +1 (480) 331-1878

Cell: +1 (480) 273-4686

cberger@turnpack.com | www.turnpack.com

 

---

Turnpack, LLC

+1 480-331-1878 | info@turnpack.com | https://www.turnpack.com

Turnpack — Efficiency Redefined Through Automation