UPS
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
|
||||
|
||||
|
||||
|
|
||||
|
|
||||
|
|
FedEx
|
Good afternoon Lorena,
PO PO26221772 shipped today, 6/9/26.
Shipping info
Ship via: FedEx Priority Overnight
Ship date: 06/09/2026
Tracking no.: 539318100213
(3 EA) Watlow
CER-1-01-00541
ULTRAMIC CONFIGURATOR
Have a terrific evening!
Best Regards,
Dawna Uchtmann
Sales Representative
Watt Solutions
Thermal Systems … Embracing Complexity
14955 W. Bell Rd #9423
Surprise, AZ 85374
602-373-9663
duchtmann@watt.solutions (no .com)
http://www.watt.solutions/
Watt Solutions is your Expert Thermal Solutions Provider! Contact us when you need engineering, technical advice or require an extra hand toward commissioning your design or application. In addition, we are your "Value Added" thermal distributor & representative in the Southwest.
All proposed product designs, materials, constructions, systems, retrofits, part numbers, configurations and calculations contained in this email must be verified and confirmed by the receiver.
This e-mail message may contain privileged and/or confidential information, and is intended to be received only by persons entitled to receive such information. If you have received this e-mail in error, please notify the sender immediately. Please delete it and all attachments from any servers, hard drives or any other media. Other use of this e-mail by you is strictly prohibited. All e-mails and attachments sent and received are subject to monitoring, reading and archival by Watt Solutions. The recipient of this e-mail is solely responsible for checking for the presence of "Viruses" or other "Malware". Watt Solutions accepts no liability for any damage caused by any such code transmitted by or accompanying this e-mail or any attachment. The information contained in this email may be subject to the export control laws and regulations of the United States, potentially including but not limited to the Export Administration Regulations (EAR) and sanctions regulations issued by the U.S. Department of Treasury, Office of Foreign Asset Controls (OFAC). As a recipient of this information you are obligated to comply with all applicable U.S. export laws and regulations. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Watt Solutions.
From: Uchtmann, Dawna <DUchtmann@watt.solutions>
Sent: Monday, June 8, 2026 12:01 PM
To: Turnpack, LLC PO26221772 (520522) <catchall@turnpack.com>
Cc: Uchtmann, Paul <PUchtmann@watt.solutions>
Subject: Re: Turnpack, LLC Order (Ref PO26221772)
Hi Lorena,
Your order is confirmed to ship FedEx NDA using collect acct 495276805. Have a good day.
Best Regards,
Dawna Uchtmann
Sales Representative
Watt Solutions
Thermal Systems … Embracing Complexity
14955 W. Bell Rd #9423
Surprise, AZ 85374
602-373-9663
duchtmann@watt.solutions (no .com)
http://www.watt.solutions/
Watt Solutions is your Expert Thermal Solutions Provider! Contact us when you need engineering, technical advice or require an extra hand toward commissioning your design or application. In addition, we are your "Value Added" thermal distributor & representative in the Southwest.
All proposed product designs, materials, constructions, systems, retrofits, part numbers, configurations and calculations contained in this email must be verified and confirmed by the receiver.
This e-mail message may contain privileged and/or confidential information, and is intended to be received only by persons entitled to receive such information. If you have received this e-mail in error, please notify the sender immediately. Please delete it and all attachments from any servers, hard drives or any other media. Other use of this e-mail by you is strictly prohibited. All e-mails and attachments sent and received are subject to monitoring, reading and archival by Watt Solutions. The recipient of this e-mail is solely responsible for checking for the presence of "Viruses" or other "Malware". Watt Solutions accepts no liability for any damage caused by any such code transmitted by or accompanying this e-mail or any attachment. The information contained in this email may be subject to the export control laws and regulations of the United States, potentially including but not limited to the Export Administration Regulations (EAR) and sanctions regulations issued by the U.S. Department of Treasury, Office of Foreign Asset Controls (OFAC). As a recipient of this information you are obligated to comply with all applicable U.S. export laws and regulations. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Watt Solutions.
From: Uchtmann, Dawna
Sent: Monday, June 8, 2026 11:46:55 AM
To: Turnpack, LLC PO26221772 (520522) <catchall@turnpack.com>
Cc: Uchtmann, Paul <PUchtmann@watt.solutions>
Subject: RE: Turnpack, LLC Order (Ref PO26221772)
Hi Lorena,
We updated PO26221772 to ship NDA on account number ending in ***6805.
Best Regards,
Dawna Uchtmann
Sales Representative
Watt Solutions
Thermal Systems … Embracing Complexity
14955 W. Bell Rd #9423
Surprise, AZ 85374
602-373-9663
duchtmann@watt.solutions (no .com)
http://www.watt.solutions/
Watt Solutions is your Expert Thermal Solutions Provider! Contact us when you need engineering, technical advice or require an extra hand toward commissioning your design or application. In addition, we are your "Value Added" thermal distributor & representative in the Southwest.
All proposed product designs, materials, constructions, systems, retrofits, part numbers, configurations and calculations contained in this email must be verified and confirmed by the receiver.
This e-mail message may contain privileged and/or confidential information, and is intended to be received only by persons entitled to receive such information. If you have received this e-mail in error, please notify the sender immediately. Please delete it and all attachments from any servers, hard drives or any other media. Other use of this e-mail by you is strictly prohibited. All e-mails and attachments sent and received are subject to monitoring, reading and archival by Watt Solutions. The recipient of this e-mail is solely responsible for checking for the presence of "Viruses" or other "Malware". Watt Solutions accepts no liability for any damage caused by any such code transmitted by or accompanying this e-mail or any attachment. The information contained in this email may be subject to the export control laws and regulations of the United States, potentially including but not limited to the Export Administration Regulations (EAR) and sanctions regulations issued by the U.S. Department of Treasury, Office of Foreign Asset Controls (OFAC). As a recipient of this information you are obligated to comply with all applicable U.S. export laws and regulations. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Watt Solutions.
From: Lorena Carrillo <info@turnpack.com>
Sent: Monday, June 8, 2026 11:14 AM
To: Uchtmann, Dawna <DUchtmann@watt.solutions>
Subject: Turnpack, LLC Order (Ref PO26221772)
Dear Dawna Uchtmann (Watt Solutions) Please find attached purchase order PO26221772 with reference: 520522 amounting in $ 2,213.52 from [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏
|
|
|||
|
|
|||
|
|||
|
|
Dear Dawna Uchtmann (Watt Solutions)
Please find attached purchase order PO26221772 with reference: 520522 amounting in
$ 2,213.52 from Turnpack, LLC as well as the resale certificate, for your review and action.
The receipt is expected for 06/15/2026, if this date is not achievable, please reply with an available date for reconsideration.
**Please acknowledge the receipt of this order and lead time.
Turnpack — Efficiency Redefined Through Automation
SimpleInvoice
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
UPS
| ||||
| ||||
| ||||
| | ||||
| ||||
| ||||
| ||||
| ||||
| ||||
| ||||
| | ||||
| | ||||
| | ||||
| ||||
| ||||
| ||||
| | ||||
| | ||||
| | ||||
| | ||||
|
Frontgrade Private
Hello,
Please shred check #739382 as I have placed a void & re issue on that check and will resend this Thursday with corrected business name.
Frontgrade Private - This document includes Frontgrade confidential and or proprietary information that shall not be duplicated, used, or disclosed, in whole or in part, except for the limited purpose for which it has been furnished.
From: Turnpack LLC <info@turnpack.com>
Sent: Monday, June 8, 2026 8:11 PM
To: 'Turnpack, LLC INV/2026/02/0002 (282353)' <catchall@turnpack.com>; LongIslandAP <LongIslandAP@frontgrade.com>
Subject: RE: Turnpack, LLC Invoice (Ref INV/2026/02/0002)
|
Some people who received this message don't often get email from info@turnpack.com. Learn why this is important |
Hello we received payment for this invoice but it was issued to Midas and it needs to be issued to Turnpack LLC.
If you have any questions please let me know.
From: Lorena Carrillo <info@turnpack.com>
Sent: Thursday, April 2, 2026 2:42 PM
To: Invoicing <longislandap@frontgrade.com>
Subject: Turnpack, LLC Invoice (Ref INV/2026/02/0002)
Dear Invoicing (Frontgrade Technologies Inc.), Please see attached invoice INV/2026/02/0002 (with reference: SO2547978) amounting in $ 625.00 [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏
|
|
|||
|
|
|||
|
|||
|
|
Dear Invoicing (Frontgrade Technologies Inc.),
Please see attached invoice
INV/2026/02/0002 (with reference: SO2547978) amounting in $ 625.00 from Turnpack, LLC. Please remit payment at your earliest convenience.
Please use the following communication for your payment: INV/2026/02/0002.
If you have received this email in error, please reply with the proper contact.
Please reply to this email or resend an email to
info@turnpack.com, with any questions, comments, or concerns regarding your order.
Your prompt payment is greatly appreciated. To avoid any interest or penalties on invoices over the stated payment terms, please remit payment by date stated on your invoice.
If payment has not been received by the 5th late business day an APR of 7.75% will be charged daily until payment in full has been received. Client is responsible for all collection costs deemed reasonable by Turnpack.
NOTE: while ACH is our preferred payment method we do accepts checks. Please make check payable to: "Turnpack LLC" and mail to the new address below. Credit card is accepted upon request with a 3.6% fee.
Please note change of Address:
22425 S Scotland Ct
Suite 104
Queen Creek, AZ 85142
Turnpack — Efficiency Redefined Through Automation
Date: 06/09/2026
Account Number: 0004937562
TURNKEY PACKAGING SOLUTIONS LLC
22425 S SCOTLAND CT, STE 104
QUEEN CREEK, AZ
85142-1056
Dear Valued Airgas Customer,
Please see the past due statement shown below and the attached invoice copies. Kindly review these items and respond with a payment status to bring your account current. If there is a dispute preventing timely payment, please contact me to resolve this.
| Invoice # | DL = Late Fee | Invoice Date | Due Date | Days in Arrear | PO# | Ship to Account Number | Amount Due |
| 5524225920 |
RR |
04/30/2026 |
04/30/2026 | 40 | RENT | 0004939036 | 102.90 |
| 5524774807 |
RR |
05/31/2026 |
05/31/2026 | 9 | RENT | 0004939036 | 107.67 |
| 210.57 | |||||||
Sincerely,
Attija Doughty
Airgas, an Air Liquide company
Credit & Collections
Phone: 216-
Email: attija.doughty@airgas.com
www.airgas.com
Hi Chris,
I received the new tool jigs and they are working much better! Thank you for reworking those and getting them turned around quickly!
Thank you!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Garrett Davidson
Sent: Tuesday, June 2, 2026 10:26 AM
To: 'Christopher Berger' <cberger@turnpack.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>; Ivan Arevalo <iarevalo@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
No huge deadline for the adapters. We have what we need for the next several weeks. Mid July would be a good target date for these. Super unfortunate that this package seemed to not be treated very well. I’ll see what we can do from the packaging side!
Thanks for letting me know,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, June 2, 2026 10:11 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>;
Ivan Arevalo <iarevalo@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Hi Garret,
Unfortunately, we have bad news regarding the returned adapters. They weren't packaged well, causing additional damage. We can't repair them and must remake them which means a longer lead time. What's your deadline for getting them back to you?
Chris
On Tue, Jun 2, 2026 at 10:04 AM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
It’s not urgent for us at this point, we’re not quite at the point that we need all of them yet. I can work on getting this shipped back if that’s easiest
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, June 1, 2026 2:57 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>; Ivan Arevalo <iarevalo@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Garrett,
Well, I'd like to make it right. If it's not urgent we can build a whole new adapter and swap it out but that would take a few weeks. This approach would prevent you from being short an adapter. Let me know what you think
Chris
On Mon, Jun 1, 2026 at 2:52 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
I held onto that one and kept it over here! I’m not worried about the engraving issue. Would you like it back? I can use a label or engrave over here if I need it.
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, June 1, 2026 2:22 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>; Ivan Arevalo <iarevalo@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Hi Garrett,
We got the shipment but it didn't incl. the adapter with the engraving issue. How do you want to proceed with this one?
Chris
On Wed, May 27, 2026 at 4:52 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
For sure! I’ll send a couple in the box for you to test. But yeah, I tried several of our toolholders on an older jig and a newer jig and they all showed the same issues.
I include an older jig as well (labeled) so you can compare to that as well. I’ll try to get this over and shipped out tomorrow!
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, May 27, 2026 4:45 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Hi Garrett,
Not good, but we'll fix them no problem. We have tool holders here and tested them. The only thing I can think of is that ours are on the lower end of the diameter tolerance and yours are on the upper end. Either way send them back and we'll open them up by 130um. Can you also spare one of your toolholders to ensure we are good before returning them to you?
Chris
On Wed, May 27, 2026 at 4:35 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Sweet!
The other item that is more of a concern is that the holes that the tools sit inside of are basically the EXACT size of the tool holders themselves. I can pick up the tools in and out okay, but I have to push (with some decent force) each of the tools into the holes to fully seat them on the holder. I compared with the previous order of the tooling jigs and the tools are much easier to put into the holes and need zero force to sit correctly.
I attached a picture of the measurements I took of the holes in slot 7 on both jigs. The new order of jigs is ~130um smaller which is likely causing the seating issue. We will have a high risk of bending, rotating, or otherwise damaging the tools so we are not comfortable using these as is.
If I were to send all the jigs back, would you be able to machine a slightly larger hole? I can send a jig from a previous order to you or send an empty tool holder for you to test yourself if that helps, or I can take additional measurements as needed. We will have a high risk of bending, rotating, or otherwise damaging the tools so we are not comfortable using these as is. I definitely already rotated one of the tools as I was attempting to pull it off of the jig by hand ☹ Let me know!
Thanks!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, May 27, 2026 2:55 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Hi Garrett,
Thanks for the update. You are correct that the set screws are adjustable to account for general tolerances of the toolbank assemblies within the machine. There are set screws for the left, right, and height adjustments. I'd suggest you dial in one and then match all the others; chances are they'll be very close. Let us know if you have any other questions.
Chris
On Wed, May 27, 2026 at 2:50 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
I looked at a few loading jigs, and testing them had some issues. I just found that the screws on either end was obstructing the loading, but I can just twist them more to fit. Each of the jigs have them twisted and sticking out at different lengths though. Is there a specific length they should be? Or should I just size them to slide easily in and out of the tool holders?
Just want to make sure these screws are for any other reason than easy loading/aligning to the tool holder itself 😊. I’ll go through the rest of them either today or tomorrow and let you know if I encounter any more issues.
Once I verify the other jigs are good to go, I’ll send the adapters back and shoot over the tracking number for you.
Thanks!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, May 27, 2026 10:46 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Hi Garrett,
Sorry about that. We do check them for flatness and vacuum seal so it would be best if you can ship them back for RCA and we'll fix it. Hope this doesn't delay your project.
Any issues with the Loading Jigs?
Chris
On Wed, May 27, 2026 at 10:34 AM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Hi Chris,
I went through the rest of the delivery and found 3 more that do not slide all the way into the tool (for a total of 4x). Physically they look similar, but may have some slight warpage issues causing these issues. Any ideas on how to fix this? I’m afraid of trying to bend them to fix the warpage. Would you like me to ship them back for you to take a look?
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Garrett Davidson
Sent: Wednesday, May 27, 2026 8:04 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Sorry, these are two SEPARATE adapters. I’m going through the other adapters now, and will let you know if I see any more issues!
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, May 27, 2026 7:58 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Hi Garrett,
Thanks for the info. My fault on the partially engraved one, I was supposed to let you know but fell behind. We already have a replacement for that one in queue but I wanted to ship all 20 just in case you needed the full qty right away. Is this the same adapter you are having the issue with on the suction cup or is this a different one?
Chris
On Wed, May 27, 2026 at 7:50 AM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Unsure if this sent or if the full email did not send. I received a bunch of error messages.
Please find the video up in the fileXchange if you need!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Garrett Davidson
Sent: Tuesday, May 26, 2026 6:28 PM
To: 'Lorena Carrillo' <lcarrillo@turnpack.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Turnpack, LLC SO26141038' <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Hi Chris/Turnpack,
I started opening up the box, and found an issue with one of the adapters:
As I slide the adapter into our tool, it stops here and does not allow us to slide it all the way to the vacuum port. The adapter itself seemed warped when placed on an optical table. I checked 5 more so far from the latest shipment and they all look good! Just this one is unable to slide in. I attached a video of myself trying to push it it and it not going all the way in without me having to physically lift the adapter into place and have a high risk of “confetti-ing” components in waffle packs. Let me know if it doesn’t come through. I also uploaded into our FileXchange system for you to review. Let me know if anyone needs access to this:
One of the 5 that I looked at after this one is missing most of the writing at the bottom of the adapter itself. Not a huge deal as it’s just cosmetic to us, but did want to let you know about it:
I will go through all the rest tomorrow morning and let you know if I encounter any more like this.
Can I send this one back to you to root cause or any ideas how to fix up? I could try to bend it but unsure how brittle the adapter itself is or if I’ll make it worse.
Thanks!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Garrett Davidson
Sent: Wednesday, May 20, 2026 4:23 PM
To: Lorena Carrillo <lcarrillo@turnpack.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Turnpack, LLC SO26141038' <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Thank you!!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Wednesday, May 20, 2026 4:20 PM
To: 'Christopher Berger' <cberger@turnpack.com>; Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: 'Turnpack, LLC SO26141038' <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Hello Team, the order has shipped complete today. Here is your tracking number for reference. 872056271057
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, May 19, 2026 11:18 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Hi Garrett,
We have the adapters back from anodizing but I slightly underestimated the assembly time. We are wrapping up the assembly today and tomorrow will be for engraving and testing and then we'll ship them out tomorrow.
The toolholder jigs are complete and ready to go.
Thanks
Chris
On Mon, May 18, 2026 at 4:29 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Hey Chris,
Were you able to ship out those parts? And have a tracking number if possible?
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, May 13, 2026 7:55 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Garrett,
We experienced a slight delay because a machine was down, but parts are currently at anodizing. We are expediting that process, and then we anticipate two days for post-anodizing assembly & engraving. We might be able to ship it out Saturday, worst case it'll be Monday. I'll keep you posted when the parts come back from anodizing and then I should be able to confirm actual ship date.
Chris
On Wed, May 13, 2026 at 7:39 AM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Hey Chris,
Just checking if you think you’d be able to ship anything this week?
Thanks!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, April 28, 2026 4:54 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Perfect. Thanks for confirming
On Tue, Apr 28, 2026 at 4:44 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Yeah that’s okay with me!
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, April 28, 2026 4:23 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Garrett,
Yes. Example image below shows one side machined and the top not machined. If we machine all 4 sides they will all look like the side edge in the image below. Also, we did start with the adapters, once they are ready and in case the jigs are not I will let you know and we can do a partial shipment.
Thanks
Chris
On Tue, Apr 28, 2026 at 4:18 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Sorry, what do you mean by “Obscuring them”? would it “fog” the glass or make it not transparent?
The wafer pack adapters are a higher priority for us if possible! But no worries either way.
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, April 28, 2026 3:44 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Hi Garrett,
Making good progress. As of now it looks like we'll ship the order the week of 05/11. We had a question about the tool holder jigs. We would prefer to machine them on multiple sides but doing so would obscure them. Reason being is that the stock material has significant tolerancing, so facing all sides would ensure greater consistency. Any objections to that?
Chris
On Tue, Apr 28, 2026 at 2:54 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Hey Chris,
Hope you are doing well! Do you have an ETA for this order? (PO#3714362)
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Chris Berger <info@turnpack.com>
Sent: Tuesday, April 7, 2026 9:03 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Subject: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Hi Garrett, Attached is the quote for the adapters and loading jigs. Let me know if you need anything else. Chris Christopher Berger Phone: +1 [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏
SO26141038
$ 69,200.00
Expires on 05/07/2026
Hi Garrett,
Attached is the quote for the adapters and loading jigs. Let me know if you need anything else.
Chris
Christopher Berger
Turnpack — Efficiency Redefined Through Automation
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
Dear Customer,
Based on your usage through June 08, 2026 for SRP electric account ***-**9-002 at 22425 S SCOTLAND CT SU 104 your June bill is projected to be approximately $550.00. The bill estimate exceeds the threshold you set in My Account.
If you have questions, please contact us at (602) 236-8833, Monday through Friday, 7 a.m.-5 p.m, or by e-mail at commercl@srpnet.com
Thank you for being a valued SRP business customer.
SRP Customer Services
| Find us on: |
|
|
|
|
Get ready for summer with Kirkland Signature favorites & our newest Featured Savings.
|
Loacker
|
Featured Summer
|
| ||||||||||||||||||||||||||
| Shop All Summer Savings ❯ |
Meat & Seafood
|
Kirkland Signature
|
|
|
|
|
| More From Costco Business Center |
Soccer
|
RWB
|
Savings event
|
| Discover How We Can Help Your Business |
|
|
| Learn More About Costco Business Center ❯ |
| Get More From Your Membership |
Same Day 
|
Auto Renewal 
|
Costco App 
|
Product specifications, availability and prices are subject to change without notice. Savings Event: Instant Savings are valid only June 15 - July 19, 2026 at Costco Business Center and CostcoBusinessDelivery.com. A valid Costco membership is required. State law may require sales tax to be charged on the pre-discounted price if the product is subject to sales tax. These taxes, if any, are in addition to the amount you are paying for the product. Quantities are limited. Item limits apply, per member. Instant Savings limited to inventory available from manufacturer. No rain checks will be issued for out of stock items. All Instant Savings are available for delivery unless indicated. Delivery orders must be placed online at CostcoBusinessDelivery.com or SameDay.CostcoBusinessDelivery.com to receive Instant Savings. Savings are not available on Costco.com and may not be combined with any other Instant Savings or coupon. Cigarette items are for resale only. No cash redemption. In the past you provided Costco with your email address info@turnpack.com. Occasionally, you will receive brief advertising announcements regarding special items and services. If you prefer not to receive these advertisements, please click unsubscribe to send an email requesting to be removed. To contact us, please click here. |
|
 |
|
|
Introducing the New Xometry Payment Portal
|
Hello,
Just following up on this request again.
Best Regards,
Ashley Accardi
Buyer
Power Device Corporation
Ashley.accardi@powerdevicecorp.com
631-212-9415
From: Accardi, Ashley
Sent: Thursday, June 4, 2026 8:25 AM
To: 'info@turnpack.com' <info@turnpack.com>
Subject: RE: PO P-01707
Good morning,
Thank you for the order. Would you be able to send me a CofC for it?
Best Regards,
Ashley Accardi
Buyer
Power Device Corporation
Ashley.accardi@powerdevicecorp.com
631-212-9415
From:
info@turnpack.com <info@turnpack.com>
Sent: Wednesday, May 13, 2026 2:58 PM
To: Accardi, Ashley <Ashley.Accardi@powerdevicecorp.com>
Subject: RE: PO P-01707
|
!! Caution: External Sender !! Do not click links or open attachments unless you verify the sender. |
Not at this time. they were already in line to be made prior to your order. We have had quite a few machine orders and those take precedence. I did ask production though and will get them to you as soon as I can.
From: Accardi, Ashley <Ashley.Accardi@powerdevicecorp.com>
Sent: Wednesday, May 13, 2026 11:55 AM
To: info@turnpack.com
Subject: RE: PO P-01707
Hello,
Thank you for the info. Is there anything that can be done to expedite this order?
Best Regards,
Ashley Accardi
Buyer
Power Device Corporation
Ashley.accardi@powerdevicecorp.com
631-212-9415
From:
info@turnpack.com <info@turnpack.com>
Sent: Wednesday, May 13, 2026 2:53 PM
To: Accardi, Ashley <Ashley.Accardi@powerdevicecorp.com>
Subject: RE: PO P-01707
|
!! Caution: External Sender !! Do not click links or open attachments unless you verify the sender. |
Order is in production with a 6-8 week lead time.
From: Accardi, Ashley <Ashley.Accardi@powerdevicecorp.com>
Sent: Wednesday, May 13, 2026 6:48 AM
To: info@turnpack.com
Subject: FW: PO P-01707
Hello,
Just following up on this PO.
Best Regards,
Ashley Accardi
Buyer
Power Device Corporation
Ashley.accardi@powerdevicecorp.com
631-212-9415
From: Accardi, Ashley
Sent: Wednesday, May 6, 2026 9:17 AM
To: Turnpack, LLC SO26181048 <catchall@turnpack.com>
Subject: PO P-01707
Good morning,
Please see the attached PO. Please review and confirm PDC dock dates. Please expedite.
Best Regards,
Ashley Accardi
Buyer
Power Device Corporation
Ashley.accardi@powerdevicecorp.com
631-212-9415
From: Chris Berger <info@turnpack.com>
Sent: Tuesday, May 5, 2026 3:43 PM
To: Accardi, Ashley <Ashley.Accardi@powerdevicecorp.com>
Subject: Turnpack, LLC Quotation (Ref SO26181048)
|
!! Caution: External Sender !! Do not click links or open attachments unless you verify the sender. |
Hello, Your quotation SO26181048 amounting in $ 791.96 is ready for review. Do not hesitate to contact us if you have any questions. Christopher [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏
|
|
|||
|
|
|||
|
|||
|
|
Hello,
Your quotation SO26181048 amounting in $ 791.96 is ready for review.
Do not hesitate to contact us if you have any questions.
Christopher Berger
Turnpack — Efficiency Redefined Through Automation
Notice: This e-mail and any files transmitted with it may contain Power Device Corporation's and its subsidiaries privileged and proprietary information. It is intended solely for the use of the individual or entity to whom it is addressed. If you are not the named recipient of this transmission, any disclosure, copying, distribution or reliance on the contents of this message is prohibited. If you received this e-mail in error, please destroy it and any attached files and notify me immediately.
Click Here to view our privacy statement.
Notice: This e-mail and any files transmitted with it may contain Power Device Corporation's and its subsidiaries privileged and proprietary information. It is intended solely for the use of the individual or entity to whom it is addressed. If you are not the named recipient of this transmission, any disclosure, copying, distribution or reliance on the contents of this message is prohibited. If you received this e-mail in error, please destroy it and any attached files and notify me immediately.
Click Here to view our privacy statement.
Notice: This e-mail and any files transmitted with it may contain Power Device Corporation's and its subsidiaries privileged and proprietary information. It is intended solely for the use of the individual or entity to whom it is addressed. If you are not the named recipient of this transmission, any disclosure, copying, distribution or reliance on the contents of this message is prohibited. If you received this e-mail in error, please destroy it and any attached files and notify me immediately.
Click Here to view our privacy statement.
Fwd: Re: Fwd: Kone Carbide product request -Carbide rod
Dear Ivan,
Here attached Quotation for your reference
Both Virgin Material and Recycle material quotation inside.
Pls check which one you like better, the price is even better than last time.
If you have other items to get quote, pls let us know.
You can also let me know your shipping address for cost checking, and let us know which payment method you want.
Hope to get your order soon.
Best regards,
|
Dear Kim,
Thank you for your clarification.
We understand that the blank is only required as stock material, and your manufacturers will use it to make the cutters. That is totally fine. We will focus on supplying the carbide blank material according to your required size and grade.
Regarding the blank, we attached a catalog for your reference and wait for your update on the confirmed quantity and specific requirements such as carbide grade, tolerance, surface condition, or packing, please also let us know so we can make sure everything is correct before production.
Best regards,
-----------------------------
Stanley Peng
Business Manager
Kone Carbide Tool Ltd.
Office: +86-28-6171627 72 | Mobile : +86-18665361540 (Wechat/Whatsapp)
sales1@konetool.com
www.konetool.com | www.konecarbide.com
No.99 Haiwang Road, Liandong U-Valley Industrial Park, Wenjiang District, Chengdu 611130 China
Yes, the blank is purely just stock material as we have manufacturers who have used the material to create cutters. I know your company is capable of this but due to the minimum and outdated information provided on the cutter tool, we prefer sending stock material to our manufacturers as they have cut tools for us in the past.
If any other questions please let me know.
Best,Ivan
On Tue, Jun 2, 2026 at 6:43 PM Stanley-Konetool <sales1@konetool.com> wrote:
Dear Ivan,
Thanks for your email, 2 questions:
1. if to receive a finished sample of carbide burr according to the drawing -- Normally it has MOQ, if needed, I can check MOQ and price for your order. MOQ depends from 10-50pcs minimum. and after that everything ok, we can make a bigger order of 130pcs.
2. If for the blank, it will be just a piece of carbide blank material right? I am not quite understanding what the blank is for. Could you explain a little bit of it?
Pls kindly give us reply on the 2 questions above. So we can move on to next step Ivan.
Hope to hear from you soonest.
Best regards,
-----------------------------
Stanley Peng
Business Manager
Kone Carbide Tool Ltd.
Office: +86-28-6171627 72 | Mobile : +86-18665361540 (Wechat/Whatsapp)
sales1@konetool.com
www.konetool.com | www.konecarbide.com
No.99 Haiwang Road, Liandong U-Valley Industrial Park, Wenjiang District, Chengdu 611130 China
On Tue, Jun 2, 2026 at 3:51 PM Ivan Arevalo <iarevalo@turnpack.com> wrote:
Yes, this is correct.
On Tue, Jun 2, 2026 at 1:04 AM Stanley-Konetool <sales1@konetool.com> wrote:
Dear Ivan,
Here comes to a changed drawing for the item you want, pls kindly confirm for sure it is the product that you want to inquire. so we can start the process.
1. Tungsten carbide material for the whole bit.
2. YG10X = ISO K20 grade
3. Quantity 130pcs for quotation.
Hope to hear from you soonest.
Best regards,
-----------------------------
Stanley Peng
Business Manager
Kone Carbide Tool Ltd.
Office: +86-28-6171627 72 | Mobile : +86-18665361540 (Wechat/Whatsapp)
sales1@konetool.com
www.konetool.com | www.konecarbide.com
No.99 Haiwang Road, Liandong U-Valley Industrial Park, Wenjiang District, Chengdu 611130 China
The material the cutter works with is Kovar and Nickel Cobalt. We used a 10% cobalt carbide grade when ordered.
Let me know if more information is needed.
Best,Ivan
On Mon, Jun 1, 2026 at 8:57 AM Ivan Arevalo <iarevalo@turnpack.com> wrote:
Hi Stanley,
The only detail on the drawing that does not match is that the tin coating should be 1.1" long, not .315" that you have.
On Fri, May 29, 2026 at 11:57 PM Stanley-Konetool <sales1@konetool.com> wrote:
Dear Ivan,
Sorry let you wait long, here comes the final drawing according to yours, could you pls check and confirm?
If ok, then we will start the quotation process to move on. And pls tell us quantity of such tool you need.
Also can we know what working material will this tool deal with? So we can choose the right carbide grade for use.
Hope to hear from you soonest.
Best regards,
-----------------------------
Stanley Peng
Business Manager
Kone Carbide Tool Ltd.
Office: +86-28-6171627 72 | Mobile : +86-18665361540 (Wechat/Whatsapp)
sales1@konetool.com
www.konetool.com | www.konecarbide.com
No.99 Haiwang Road, Liandong U-Valley Industrial Park, Wenjiang District, Chengdu 611130 China
Sorry for the late reply.
The tool's total length should be 63.5 mm.
thanks,
Ivan
On Fri, May 22, 2026 at 1:23 AM Stanley-Konetool <sales1@konetool.com> wrote:
Hi Ivan,
We lost a critical dimension in your drawing. what is the total length of the tool? Check picture below in yellow and hope to hear from you soon on the number:
Best regards,
-----------------------------
Stanley Peng
Business Manager
Kone Carbide Tool Ltd.
Office: +86-28-6171627 72 | Mobile : +86-18665361540 (Wechat/Whatsapp)
sales1@konetool.com
www.konetool.com | www.konecarbide.com
No.99 Haiwang Road, Liandong U-Valley Industrial Park, Wenjiang District, Chengdu 611130 China
Sorry for the delayed response. This could work for us. I received the drawings for the cutter tool which I have attached below in both DXF and PDF formats. They may be incomplete, so please ask any questions about the tooling and I will try to respond as accurately as possible. We would like to see our options for receiving the completed tooling.
Additionally, how can we start the process for ordering, shipping, and receiving the tooling?
Best,Ivan Arevalo
On Mon, May 11, 2026 at 6:35 PM Stanley-Konetool <sales1@konetool.com> wrote:
Dear Ivan,
Yes, if without drawing would be hard to quote, here comes the quotation for the carbide rods FYI. pls check.
There are difference
-1. Virgin Material and Recycle material for your choice.
-2. Different quantity for your choice.
Wait for your reply on these rods, anything, pls just tell us and we'd deal with it soonest.
Best regards,
-----------------------------
Stanley Peng
Account Manager
Kone Carbide Tool Ltd.
Office: +86-28-6171627 72 | Mobile : +86-18665361540 (Wechat/Whatsapp)
sales1@konetool.com
www.konetool.com | www.konecarbide.com
No.99 Haiwang Road, Liandong U-Valley Industrial Park, Wenjiang District, Chengdu 611130 China
Best,
Ivan A
On Fri, May 8, 2026 at 7:00 PM Stanley-Konetool <sales1@konetool.com> wrote:
Dear Ivan,
Thanks for giving us details of the carbide rods, pls wait for our quotation of the carbide rods.
Could you send us the drawing of the cutters you want? so we can add cutter into quotation too.
We wait for your reply on cutters to move on.
Thank you very much.
-----------------------------
Stanley Peng
Account Manager
Kone Carbide Tool Ltd.
Office: +86-28-6171627 72 | Mobile : +86-18665361540 (Wechat/Whatsapp)
sales1@konetool.com
www.konetool.com | www.konecarbide.com
No.99 Haiwang Road, Liandong U-Valley Industrial Park, Wenjiang District, Chengdu 611130 China
Hi Ivan
Thanks , we also can supply the finished cutter or tools , pelase send us the drawaing , then we will check , if we can do , we will quote you the both the rod and cutter
I will ask our manager Stanlery to serve you together
Thanks
-----------------------------
Felix
Pre-sales
KONE CARBIDE TOOL LTD
Focus On Carbide Tools Supply Chain Integration !
office:+86-28-61716272
inquiry@konetool.com
www.konetool.com | www.konecarbide.com
Add:No.99 Haiwang Road, Liandong U-Valley Industrial Park, Wenjiang District, Chengdu 611130 China
------------------ Original ------------------From： "Ivan Arevalo"<iarevalo@turnpack.com>Date： 2026-05-08 05:02To： "inquiry-konetool"<inquiry@konetool.com>;Subject： Re: Fwd: Kone Carbide product request -Carbide rodHi Felix,
Nice to meet you as well. Yes, these will be used and turned into cutters. If we provided the proper drawings and documents, could it be possible to get quoted for both stock material and manufacturing them into cutters? That would be great, thanks.
On Thu, May 7, 2026 at 1:54 PM inquiry-konetool <inquiry@konetool.com> wrote:
Hi Ivan Arevalo
Nice to meet you! , thanks so much for your enquiry about carbide rod 8x63.5mm , Yes , they are our regular supply products , our factory always manufacture various sizes of carbide rods .
so Can I know the application of this carbide rod that you will purchase ? to make some tools or cutters ? because we would like to recommend the proper TC Grade .
After get your futher information , then we will quote you
Best regards
-----------------------------
Felix
Pre-sales
KONE CARBIDE TOOL LTD
Focus On Carbide Tools Supply Chain Integration !
office:+86-28-61716272
inquiry@konetool.com
www.konetool.com | www.konecarbide.com
Add:No.99 Haiwang Road, Liandong U-Valley Industrial Park, Wenjiang District, Chengdu 611130 China
------------------ Original ------------------From： "TOOL KONE"<konecarbidetool@gmail.com>Date： 2026-05-08 03:56To： "konetool-Oscar"<lee@konetool.com>; sales1@konetool.com;Subject： Fwd: Kone Carbide Product Inquiry
---------- 转发的邮件 ---------
发件人： Kone Carbide <sales@konecarbide.com>
日期：2026年5月7日 周四11:26
主题：Kone Carbide Product Inquiry
收件人： <sales@konecarbide.com>
Name: Ivan Arevalo
Email: iarevalo@turnpack.com
Country: United States
Phone: 4808692308
Call or not: It’s okay.
Company: Turnpack
Product Name: Carbide Rods
Message: I used the wrong email in the last request. I was requesting quotation regarding the pricing of approximately 130 solid round carbide blanks, 8mm in diameter and 63.5mm in length. If pricing changes with quantity, we would like to know options as well. We are located out in Queen Creek, Arizona if shipping is involved with the quotation process. Any information would be appreciated, thanks!
---
Date: May 7, 2026
Time: 5:26 pm
Page URL: https://konecarbide.com/carbide-rods/
User Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/148.0.0.0 Safari/537.36
Remote IP: 70.184.110.153
Please do not respond to this message. This email was sent from an unattended mailbox. This report was generated at approximately 6:46 PM CDT 06/09/2026.
