Archivados
Info Inbox
info@turnpack.com
-
sm23165dt: 1 NEW!
1 new: sm23165dt
You might also like
Want to turn off this email?
Your opinion matters. Rate this email:
Email Reference ID: [#11df24b6c3094458a75cf144ac494f00]
Update your email preferences or learn about account protection.
If you have a question, contact us.eBay Inc., 2025 Hamilton Avenue, San Jose, CA 95125, United States
© 1995-2026 eBay Inc. or its affiliates
por "eBay" <ebay@ebay.com> - 08:37 - 2 jun. 2026 -
Your MISUMI order has shipped Turnpack, LLC 000Y7G
Your MISUMI order has shipped Turnpack, LLC 000Y7G
YOUR ORDER HAS SHIPPED Hi Chris Berger, Thank you for choosing MISUMI! The below items have shipped: Order Date: 06/01/2026 3:12 PM Customer PO Reference: PO26221766 Order No.: NB1143962D Line No.: 1 Customer Item Reference: MISUMI Part No: RPG38 Brand Name: MISUMI Product Name: REVOLVING STAGE Quantity: 3 Unit Price: 367.27 (USD) Shipping Date: 06/01/2026 Express: Amount: 1,101.81 (USD) Ship Via(Service): UPS Ground Prepaid Carrier Tracking No.: 1Z100R400303025533 Shipping Location: Warehouse Standard Shipping View your order history Thank you! MISUMI Customer Service MISUMI inquire@misumiusa.com | 800.681.7475 1475 E Woodfield Rd, Ste. 1300 | Schaumburg, IL 60173 
** This e-mail message was sent to you by an automated e-mail system **
por "MISUMI USA Customer Service" <inquire@misumiusa.com> - 06:07 - 2 jun. 2026 -
Invoice for Your Order PO26221765
InvoiceBilled toTURNPACK LLC
22425 S SCOTLAND CT STE 104
QUEEN CREEK AZ 85142Purchase Order PO26221765 Total $543.24 Invoice 65954363 Invoice Date 6/1/26 Payment Terms 2% 10, Net 30 Deduct $10.62 on merchandise if paid by 6/11/26. Shipped toAttention: Suite 104Turnpack LLC
22425 S Scotland CT Ste 104
Queen Creek AZ 85142Mail Payment to McMaster-Carr
PO Box 7690
Chicago IL 60680-7690Your Account 438808000 Christopher Berger placed this order.Line Product Ordered Shipped Balance Price Total 1 9055K12 High-Strength 7075 Aluminum Bar, 1/2" Thick x 2" Wide, 1 Foot Long 1 Each1 0 83.41 Each83.41 2 92095A284 18-8 Stainless Steel Button Head Hex-Drive Screw, M8 x 1.25 mm Thread Size, 20 mm Long, Packs of 25 1 Pack1 0 17.94 Per Pack17.94 3 92125A052 18-8 Stainless Steel Hex-Drive Flat Head Screw, M2 x 0.4 mm Thread Size, 6 mm Long, Packs of 50 2 Packs2 0 9.60 Per Pack19.20 4 93285A216 Nylon-Tip 18-8 Stainless Steel Set Screw, M4 x 0.7 mm Thread, 10 mm Long, Packs of 5 21 Packs21 0 17.69 Per Pack371.49 5 26355A84 High-Speed Steel Chip-Clearing Tap for Blind Holes, TiN Coated, Bottoming Chamfer, M6 x 1 mm Thread Size 2 Each2 0 19.43 Each38.86 Merchandise 530.90 Shipping 12.34 Total $543.24 Packing List Shipped Weight Carrier Tracking 8231382-01 06/01/2026 3 lb UPS 1Z9293810101682148 Federal ID 36-1458720
por "McMaster-Carr" <invoice.reply@mcmaster.com> - 03:31 - 2 jun. 2026 -
Shipped: "Amazon Basics 8-Pack 9V..." and 5 more items
Your package was shipped!
OrderedShipped
Out for deliveryDeliveredArriving tomorrowTurnpack - QUEEN CREEK, AZ - On behalf of TurnpackOrder # 112-3452824-8789836
Quantity: 5$899
Quantity: 1$1269Total $57.64 
View related transactions in Your Transactions. A delivery driver may contact you on the day of delivery. For everyone’s safety, ensure a clear, well-lit path and secure pets before arrival. ©2026 Amazon.com, Inc. or its affiliates. Amazon and all related marks are trademarks of Amazon.com, Inc. or its affiliates, Amazon.com, Inc. 410 Terry Avenue N., Seattle, WA 98109.Your invoice can be accessed here.
One or more items in your shipment was supplied by a different seller than the seller you purchased the item from. Visit Your Orders from a web browser to see the suppliers of these items on your invoices.
Unless otherwise noted, items sold by Amazon are subject to sales tax in selected states or provinces in accordance with the applicable laws of that state. If your order contains one or more items from a seller other than Amazon, it may be subject to local and state or province tax, depending upon the sellers business policies and the location of their operations. For more information, go to tax and seller information.
por "Amazon.com" <shipment-tracking@amazon.com> - 01:56 - 2 jun. 2026 -
INQUIRY-Turnpack ASH08SF X 3ea-0602
Hi Lorena,
Please confirm the attached QTN is still available and advise current delivery.
Thank you.
Best Regards,
Cathy Wang
From: Lorena [mailto:info@turnpack.com]
Sent: Tuesday, September 23, 2025 6:47 AM
To: 'StellaJau'; notifications@turnpack.com
Cc: 'Christopher Berger'; vincentw@kimpsion.com; terril@kimpsion.com; 'SHA KP TonyChen 陳宗信'; 'WayneTsai蔡明潔'; 'Kimpsion. Spencer Wang '; 'BrianC'; 'jerryc'; 'Kimpsion. Jennifer '; 'Kimp- Umit C'; cathyw@kimpsion.com; 'JessicaL'
Subject: RE: INQUIRY-0922 to Turnpack ASH08SF parts inquiryQuote sent via our system and attached here as well.
Let me know if you need anything else.
Thank you for your time,
Lorena Carrillo
Office Manager
Office: +1 (480) 331-1878
22425 S Scotland Ct, Suite104, Queen Creek, AZ 85142
lcarrillo@turnpack.com | www.turnpack.com
From: StellaJau <stellaj@kimpsion.com>
Sent: Monday, September 22, 2025 2:09 AM
To: 'Info @ Turnpack' <info@turnpack.com>; notifications@turnpack.com
Cc: 'Christopher Berger' <cberger@turnpack.com>; vincentw@kimpsion.com; terril@kimpsion.com; 'SHA KP TonyChen 陳宗信' <tonyc@kimpsion.com>; 'WayneTsai蔡明潔' <waynet@kimpsion.com>; 'Kimpsion. Spencer Wang ' <spencerw@kimpsion.com>; 'BrianC' <brianc@kimpsion.com>; 'jerryc' <jerryc@kimpsion.com>; 'Kimpsion. Jennifer ' <jenniferc@kimpsion.com>; 'Kimp- Umit C' <UmitC@kimpsion.com>; cathyw@kimpsion.com; JessicaL <Jessical@kimpsion.com>
Subject: INQUIRY-0922 to Turnpack ASH08SF parts inquiryHi, Lorena,
Please quote our Net cost / net 30 days monthly 25th pay date and confirm as follows items lead time with estimate G.W. and dimension after packaging. Thanks!
Vendor P/N
Description
Q’TY
Net Cost(U/P)
ASH08SF
Delid Tool Short Flutes
3EA
115.00
Best regards.
*****************************
Stella Jau EXT:633
KIMPSION CORP.
TEL:+886-2-29160715
*****************************
por Cathy Wang - 11:47 - 1 jun. 2026 -
Your Package Arrives Tomorrow
UPS
Hi LorenaCarrillo, Your package is arriving tomorrow. From MCMASTER CARR SUPPLY CO Scheduled Delivery Tuesday 06/02/2026
by 5:00 PMChange Delivery Ship To 22425 S SCOTLAND CT STE 104
QUEEN CREEK, AZ 85142
USUPS Next Day Air® 1Z9293810101682148 Reference Number: PO26221765 You will be prompted to accept Terms and Conditions to change delivery.
por "UPS" <mcinfo@ups.com> - 11:36 - 1 jun. 2026 -
Dropoff confirmed for wowstick Mini Electric...
Hello Lorena,
Thank you for dropping off the item at the Amazon authorized drop off location.Return summary
PO #
PO26201753
Order #
112-2358513-7094603Item(s) in your return request
Quantity: 1
Order # 112-2358513-7094603©2026 Amazon.com, Inc. or its affiliates. Amazon and all related marks are trademarks of Amazon.com, Inc. or its affiliates, Amazon.com, Inc. 410 Terry Avenue N., Seattle, WA 98109.Please note that product prices and availability are subject to change. Prices and availability may differ from those you see when you visit
Learn more about Our Returns Policy
This email was sent from a notification-only address that cannot accept incoming email. Please do not reply to this message. 
por "return@amazon.com" <return@amazon.com> - 11:07 - 1 jun. 2026 -
Get started with Stripe Treasury
Get started with Stripe Treasury
Get started with Stripe Treasury You can use Treasury to store, send, and spend in your financial account without leaving the Dashboard. Your earnings from payments will automatically settle in your financial account, and you can also add funds manually to get started. Explore your financial account With Treasury, your business can now: Get faster access to payments from customers
Send money to anyone in 150+ countries
Create free physical and virtual cards
Earn 2% cashback on card spend
Manage and convert currencies instantly
View the docs to learn more about Treasury. This email relates to your Turnpack, LLC Stripe account.
Account ID: acct_1C9jT3EH0ZYbtiGi
Need to refer to this message? Use this ID: em_kzxmnw1tvignrw3u9fi4vgdbezv409Stripe, 354 Oyster Point Blvd, South San Francisco, CA 94080
por "Stripe" <notifications@stripe.com> - 10:52 - 1 jun. 2026 -
Your Autodesk subscription renews soon
Autodesk
Click here to view this email in your web browser.
Your subscription will renew soon
Hi Turnpack LLC,
This is a reminder that your Autodesk subscription will renew on July 2, 2026 using your payment method on file. There is no action needed on your part.
Order detailsRenewal date: July 2, 2026
Fusion - Legacy 2024 | 3 year
Subscription ID 68464389484634
Quantity 1 Price $2,040.00 Annual payments Due Jul 2, 2026 $680.00
Due Jul 2, 2027 $680.00
Due Jul 2, 2028 $680.00
Order summary
Order subtotal $680.00 Order total
$680.00
Price is an estimate and does not reflect tax, promotions or pricing updates.
Payment details
Payment method AMEX - 2004 Manage your subscription in Autodesk accountLearn more about Autodesk account benefits.
© Copyright 2026 Autodesk, Inc. All rights reserved. • The Landmark at One Market Street, Suite 400 • San Francisco, CA 94105
Legal. Online Purchase and Auto-Renewal Terms. Privacy Statement
Agreement to auto-renewal: On your renewal date, you will be charged for the most recent subscription price based on your term plus applicable taxes. Cancel anytime. Learn more.
This is an operational email.
Please do not reply to this email. Replies to this email will not be responded to or read.
Autodesk and the Autodesk logo are registered trademark or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specifications and pricing at any time without notice and price is subject to currency fluctuation.
por "Autodesk" <no-reply@autodeskcommunications.com> - 10:12 - 1 jun. 2026 -
Confirmation for Your Order PO26221765
Thank you for your order. We will deliver your items by 5 pm tomorrow.Confirmation
Delivery address
Turnpack LLC
22425 S Scotland CT Ste 104
Queen Creek AZ 85142
Attention: Suite 104Billing address
Turnpack LLC
22425 S Scotland CT Ste 104
Queen Creek AZ 85142Delivery method
UPS GroundOrder date
6/1/2026Payment method
InvoicePlaced by
Christopher BergerMcMaster-Carr number
8231382PO26221765 Delivers Jun 2, by 5 pm 1 High-Strength 7075 Aluminum Bar
1/2" Thick x 2" Wide, 1 Foot Long
9055K121
each83.41
each$83.41 2 18-8 Stainless Steel Button Head Hex-Drive Screw
M8 x 1.25 mm Thread Size, 20 mm Long
92095A2841
pack of 2517.94
pack$17.94 3 18-8 Stainless Steel Hex-Drive Flat Head Screw
M2 x 0.4 mm Thread Size, 6 mm Long
92125A0522
packs of 509.60
pack$19.20 4 Nylon-Tip 18-8 Stainless Steel Set Screw
M4 x 0.7 mm Thread, 10 mm Long
93285A21621
packs of 517.69
pack$371.49 5 High-Speed Steel Chip-Clearing Tap for Blind Holes
TiN Coated, Bottoming Chamfer, M6 x 1 mm Thread Size
26355A842
each19.43
each$38.86 Merchandise 530.90 Shipping 12.34 Total $543.24 Your order is subject only to our terms and conditions, available at www.mcmaster.com or from our Sales Department. Phone: (562) 692-5911 Email: la.sales@mcmaster.com
por "McMaster-Carr" <la.sales@mcmaster.com> - 08:46 - 1 jun. 2026 -
RE: Turnpack, LLC Order (Ref SO2543968)
Hi Ashley I have been out of the office for the week. Someone will get back to you shortly with an answer.
Thank you for your time,
Lorena Carrillo
From: Accardi, Ashley <Ashley.Accardi@powerdevicecorp.com>
Sent: Friday, May 29, 2026 7:34 AM
To: lcarrillo@turnpack.com; catchall@turnpack.com
Subject: RE: Turnpack, LLC Order (Ref SO2543968)Good morning,
Has there been any progress on expediting PO CEP-00186? Please advise ASAP.
Best Regards,
Ashley Accardi
Buyer
Power Device Corporation
Ashley.accardi@powerdevicecorp.com
631-212-9415
From: lcarrillo@turnpack.com <lcarrillo@turnpack.com>
Sent: Thursday, April 9, 2026 12:43 PM
To: Accardi, Ashley <Ashley.Accardi@powerdevicecorp.com>; catchall@turnpack.com
Subject: RE: Turnpack, LLC Order (Ref SO2543968)!! Caution: External Sender !! Do not click links or open attachments unless you verify the sender.
Invoice 1015855 is not an invoice is it’s a sales order as mentioned below. Please do not pay off of the sales order.
1015855 is the down payment invoice required before the process can start.
Once the order has shipped an invoice for the remaining balance will be sent with tracking information.
Payment should be made via ACH, details attached for reference.
Please let me know if you have any other questions. Have a great day.
Lorena Carrillo
Office Manager
Office: 480-331-1878
Line: 781-938-006922425 S Scotland Ct, Suite104, Queen Creek, AZ 85142
lcarrillo@turnpack.com | www.turnpack.com
https://www.turnpack.com/midas-rework/delidderFrom: Accardi, Ashley <Ashley.Accardi@powerdevicecorp.com>
Sent: Thursday, April 9, 2026 7:43 AM
To: info@turnpack.com; catchall@turnpack.com
Subject: FW: Turnpack, LLC Order (Ref SO2543968)Hello,
Please see the below notes from my accounting team. Please confirm.
Best Regards,
Ashley Accardi
Buyer
Power Device Corporation
Ashley.accardi@powerdevicecorp.com
631-212-9415
From: Pfeifer, Christine <Christine.Pfeifer@powerdevicecorp.com>
Sent: Thursday, April 9, 2026 10:38 AM
To: Accardi, Ashley <Ashley.Accardi@powerdevicecorp.com>
Cc: Macatol,Meico <Meico.Macatol@powerdevicecorp.com>; Mooney, Richard <Richard.Mooney@powerdevicecorp.com>
Subject: FW: Turnpack, LLC Order (Ref SO2543968)Ashley,
Can you please confirm with the vendor on how we will be invoiced.
Invoice 1015762 is for the 30% downpayment (which will be paid if approved). (Meico – please have this invoice approved for payment.)
Invoice 1015855 is for the SO full amount of the order.
However, the balance of the order should be $ 41,800.50 which reflects the total order amount of $59,715.00 less the downpayment of $ 17,914.50 .
Will we be receiving a new invoice for the balance? ($41,800.50)
Please advise on how this vendor will be invoicing us.
Thank you.
Christine
Christine Pfeifer
AR/AP Accountant
Power Device Corporation
T: (631) 567-5600 Ext. 7948
From: Accardi, Ashley <Ashley.Accardi@powerdevicecorp.com>
Sent: Thursday, April 9, 2026 10:06 AM
To: Pfeifer, Christine <Christine.Pfeifer@powerdevicecorp.com>
Subject: FW: Turnpack, LLC Order (Ref SO2543968)Hello,
It looked like 1015762, is the pre-payment needed to get the order started. The rest of the order can be paid within 30 days. Thanks!
Best Regards,
Ashley Accardi
Buyer
Power Device Corporation
Ashley.accardi@powerdevicecorp.com
631-212-9415
From: Macatol,Meico <Meico.Macatol@powerdevicecorp.com>
Sent: Thursday, April 9, 2026 9:52 AM
To: Pfeifer, Christine <Christine.Pfeifer@powerdevicecorp.com>; Accardi, Ashley <Ashley.Accardi@powerdevicecorp.com>
Cc: Mooney, Richard <Richard.Mooney@powerdevicecorp.com>
Subject: FW: Turnpack, LLC Order (Ref SO2543968)
Importance: HighHi Ms. Christine,
Ms. Ashley confirmed that invoice# 1015855 should be paid. Please see details conversation below. I think we should confirm to her which invoice should be paid. ICN# 1015855 or ICN# 1015762.
Hi Ms. Ashley,
May we confirm which the above prepaid invoice should be paid. Please confirm
Thank You
Best Regards,
Meico Macatol
Accounts Payable Team
Power Device Corporation
From: Accounts Payable (PDC)
Sent: Friday, April 3, 2026 1:13 PM
To: Accardi, Ashley <Ashley.Accardi@powerdevicecorp.com>
Subject: RE: Turnpack, LLC Order (Ref SO2543968)Hi Ms. Ashley,
This is now entered and will be included in today’s payment run
ICN# - 1015855
Thank you
Best Regards,
Meico Macatol
Accounts Payable Team
Power Device Corporation
From: Accardi, Ashley <Ashley.Accardi@powerdevicecorp.com>
Sent: Wednesday, April 1, 2026 2:17 PM
To: Accounts Payable (PDC) <pdcap@powerdevicecorp.com>
Subject: FW: Turnpack, LLC Order (Ref SO2543968)Hello,
Please see attached, down payment is needed before moving forward with this order. Please advise when and if that was taken care of. Thank you
Best Regards,
Ashley Accardi
Buyer
Power Device Corporation
Ashley.accardi@powerdevicecorp.com
631-212-9415
From: Lorena Carrillo <info@turnpack.com>
Sent: Tuesday, March 24, 2026 3:03 PM
To: Accardi, Ashley <Ashley.Accardi@powerdevicecorp.com>
Subject: Turnpack, LLC Order (Ref SO2543968)!! Caution: External Sender !! Do not click links or open attachments unless you verify the sender.
Hello, Your order SO2543968 amounting in $ 59,715.00 has been confirmed. Thank you for your trust! Do not hesitate to contact us if you have any questions. Thank you for your time, [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏
SO2543968
$ 59,715.00Hello,
Your order SO2543968 amounting in $ 59,715.00 has been confirmed.
Thank you for your trust!
Do not hesitate to contact us if you have any questions.Thank you for your time,
Lorena Carrillo
Office ManagerOffice: +1 (480) 331-1878
lcarrillo@turnpack.com | www.turnpack.com
Turnpack — Efficiency Redefined Through Automation
Notice: This e-mail and any files transmitted with it may contain Power Device Corporation's and its subsidiaries privileged and proprietary information. It is intended solely for the use of the individual or entity to whom it is addressed. If you are not the named recipient of this transmission, any disclosure, copying, distribution or reliance on the contents of this message is prohibited. If you received this e-mail in error, please destroy it and any attached files and notify me immediately.
Click Here to view our privacy statement.
Notice: This e-mail and any files transmitted with it may contain Data Device Corporation's and its subsidiaries privileged and proprietary information. It is intended solely for the use of the individual or entity to whom it is addressed. If you are not the named recipient of this transmission, any disclosure, copying, distribution or reliance on the contents of this message is prohibited. If you received this e-mail in error, please destroy it and any attached files and notify me immediately.
Click Here to view our privacy statement.
por Lorena Carrillo - 08:06 - 1 jun. 2026 -
RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Hi Jeff,
Just checking to see if you have any questions on that quote Chris sent? Attached again here.
Let us know.
Best Regards,
Keith Chalman
President - Chalman Technologies
c (714) 412-5411
a 3150 E. La Palma Ave. Suite K, Anaheim, CA 92806
Manufacturer's Representative for:
(entire principal list at www.cti-rep.com)
From: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Sent: Tuesday, May 26, 2026 6:52 PM
To: Turnpack, LLC SO26201063 <catchall@turnpack.com>; Keith Chalman <keith@cti-rep.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert QuoteHi Chris and Keith,
Thanks for the quote. I will review it and organize my thoughts a bit and let you know if I have any questions by the end of the week.
Hope you enjoyed your long weekend!
Jeff Galli
Sr. Process Development EngineerTELEDYNE FLIR OEM
Upcoming out of office: May 14-18
Teledyne Confidential; Commercially Sensitive Business DataFrom: Chris Berger <info@turnpack.com>
Sent: Tuesday, May 26, 2026 7:23 AM
To: Jeff Galli <jeff.galli@teledyneflir.com>
Subject: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert QuoteExternal Email
Hi Jeff, Attached is the quote for the split p-part bonding inserts for the 3 products for 1 machine. Let me know if you have any questions. If [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏
SO26201063
$ 21,150.00
Expires on 06/21/2026
Hi Jeff,
Attached is the quote for the split p-part bonding inserts for the 3 products for 1 machine. Let me know if you have any questions.
If you intend to move forward it would be best if you could send us boats and possibly some parts as well just to make sure clearance is not going to be an issue.
Chris
Christopher BergerTurnpack — Efficiency Redefined Through Automation
por Chalman Technologies - 06:42 - 1 jun. 2026 -
Your Daily Digest for Mon, 6/1 is ready to view
Informed Delivery
COMING TO YOU SOON
Hi, Chris!
You have 2 mailpiece(s) and 0 inbound package(s) arriving soon.
Monday
1 June20262
Mailpiece(s)
0
Package(s)
MAIL
View Dashboard Expected Today
2 item(s)
FROM: MSC Industrial Supply Co.
There is one or more mailpieces for which we do not currently have an image that is included in today's mail.
PACKAGES
View Dashboard No packages are available to display. 
You may have more mail or packages than are shown in your Daily Digest. To check, go to your Dashboard.
Mail may arrive several days after you receive the notification. Please allow up to a week for delivery before reporting missing mail. Report missing mail.
*These images represent mail pieces that are sorted on USPS® automated equipment. Some of your mail may not be shown here.
You subscribed to this service with USPS® Product Technology Innovation, 475 L`Enfant Plaza SW, Washington, DC 20260.
If you no longer wish to receive daily email notifications, unsubscribe here.
If you need support, please visit user support for Informed Delivery®.
For more information about this service, please visit general information about Informed Delivery.
Copyright © 2026 United States Postal Service®. All Rights Reserved. The Eagle Logo and the trade dress of USPS® Packaging are among the many trademarks of the U.S. Postal Service®.
This is an automated email, please do not reply to this message. This message is for the designated recipient only and may contain privileged, proprietary, or otherwise private information. If you have received it in error, please delete. Any other use of the email by you is prohibited.
por "USPS Informed Delivery" <USPSInformeddelivery@email.informeddelivery.usps.com> - 06:21 - 1 jun. 2026 -
Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Garrett,Well, I'd like to make it right. If it's not urgent we can build a whole new adapter and swap it out but that would take a few weeks. This approach would prevent you from being short an adapter. Let me know what you thinkChrisOn Mon, Jun 1, 2026 at 2:52 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:I held onto that one and kept it over here! I’m not worried about the engraving issue. Would you like it back? I can use a label or engrave over here if I need it.
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, June 1, 2026 2:22 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>; Ivan Arevalo <iarevalo@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Garrett,
We got the shipment but it didn't incl. the adapter with the engraving issue. How do you want to proceed with this one?
Chris
On Wed, May 27, 2026 at 4:52 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
For sure! I’ll send a couple in the box for you to test. But yeah, I tried several of our toolholders on an older jig and a newer jig and they all showed the same issues.
I include an older jig as well (labeled) so you can compare to that as well. I’ll try to get this over and shipped out tomorrow!
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, May 27, 2026 4:45 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Garrett,
Not good, but we'll fix them no problem. We have tool holders here and tested them. The only thing I can think of is that ours are on the lower end of the diameter tolerance and yours are on the upper end. Either way send them back and we'll open them up by 130um. Can you also spare one of your toolholders to ensure we are good before returning them to you?
Chris
On Wed, May 27, 2026 at 4:35 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Sweet!
The other item that is more of a concern is that the holes that the tools sit inside of are basically the EXACT size of the tool holders themselves. I can pick up the tools in and out okay, but I have to push (with some decent force) each of the tools into the holes to fully seat them on the holder. I compared with the previous order of the tooling jigs and the tools are much easier to put into the holes and need zero force to sit correctly.
I attached a picture of the measurements I took of the holes in slot 7 on both jigs. The new order of jigs is ~130um smaller which is likely causing the seating issue. We will have a high risk of bending, rotating, or otherwise damaging the tools so we are not comfortable using these as is.
If I were to send all the jigs back, would you be able to machine a slightly larger hole? I can send a jig from a previous order to you or send an empty tool holder for you to test yourself if that helps, or I can take additional measurements as needed. We will have a high risk of bending, rotating, or otherwise damaging the tools so we are not comfortable using these as is. I definitely already rotated one of the tools as I was attempting to pull it off of the jig by hand ☹ Let me know!
Thanks!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, May 27, 2026 2:55 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Garrett,
Thanks for the update. You are correct that the set screws are adjustable to account for general tolerances of the toolbank assemblies within the machine. There are set screws for the left, right, and height adjustments. I'd suggest you dial in one and then match all the others; chances are they'll be very close. Let us know if you have any other questions.
Chris
On Wed, May 27, 2026 at 2:50 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
I looked at a few loading jigs, and testing them had some issues. I just found that the screws on either end was obstructing the loading, but I can just twist them more to fit. Each of the jigs have them twisted and sticking out at different lengths though. Is there a specific length they should be? Or should I just size them to slide easily in and out of the tool holders?
Just want to make sure these screws are for any other reason than easy loading/aligning to the tool holder itself 😊. I’ll go through the rest of them either today or tomorrow and let you know if I encounter any more issues.
Once I verify the other jigs are good to go, I’ll send the adapters back and shoot over the tracking number for you.Thanks!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, May 27, 2026 10:46 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Garrett,
Sorry about that. We do check them for flatness and vacuum seal so it would be best if you can ship them back for RCA and we'll fix it. Hope this doesn't delay your project.
Any issues with the Loading Jigs?
Chris
On Wed, May 27, 2026 at 10:34 AM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Hi Chris,
I went through the rest of the delivery and found 3 more that do not slide all the way into the tool (for a total of 4x). Physically they look similar, but may have some slight warpage issues causing these issues. Any ideas on how to fix this? I’m afraid of trying to bend them to fix the warpage. Would you like me to ship them back for you to take a look?
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Garrett Davidson
Sent: Wednesday, May 27, 2026 8:04 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsSorry, these are two SEPARATE adapters. I’m going through the other adapters now, and will let you know if I see any more issues!
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, May 27, 2026 7:58 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Garrett,
Thanks for the info. My fault on the partially engraved one, I was supposed to let you know but fell behind. We already have a replacement for that one in queue but I wanted to ship all 20 just in case you needed the full qty right away. Is this the same adapter you are having the issue with on the suction cup or is this a different one?
Chris
On Wed, May 27, 2026 at 7:50 AM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Unsure if this sent or if the full email did not send. I received a bunch of error messages.
Please find the video up in the fileXchange if you need!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Garrett Davidson
Sent: Tuesday, May 26, 2026 6:28 PM
To: 'Lorena Carrillo' <lcarrillo@turnpack.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Turnpack, LLC SO26141038' <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Chris/Turnpack,
I started opening up the box, and found an issue with one of the adapters:
As I slide the adapter into our tool, it stops here and does not allow us to slide it all the way to the vacuum port. The adapter itself seemed warped when placed on an optical table. I checked 5 more so far from the latest shipment and they all look good! Just this one is unable to slide in. I attached a video of myself trying to push it it and it not going all the way in without me having to physically lift the adapter into place and have a high risk of “confetti-ing” components in waffle packs. Let me know if it doesn’t come through. I also uploaded into our FileXchange system for you to review. Let me know if anyone needs access to this:
One of the 5 that I looked at after this one is missing most of the writing at the bottom of the adapter itself. Not a huge deal as it’s just cosmetic to us, but did want to let you know about it:
I will go through all the rest tomorrow morning and let you know if I encounter any more like this.
Can I send this one back to you to root cause or any ideas how to fix up? I could try to bend it but unsure how brittle the adapter itself is or if I’ll make it worse.
Thanks!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Garrett Davidson
Sent: Wednesday, May 20, 2026 4:23 PM
To: Lorena Carrillo <lcarrillo@turnpack.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Turnpack, LLC SO26141038' <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsThank you!!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Wednesday, May 20, 2026 4:20 PM
To: 'Christopher Berger' <cberger@turnpack.com>; Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: 'Turnpack, LLC SO26141038' <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHello Team, the order has shipped complete today. Here is your tracking number for reference. 872056271057
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, May 19, 2026 11:18 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Garrett,
We have the adapters back from anodizing but I slightly underestimated the assembly time. We are wrapping up the assembly today and tomorrow will be for engraving and testing and then we'll ship them out tomorrow.
The toolholder jigs are complete and ready to go.
Thanks
Chris
On Mon, May 18, 2026 at 4:29 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Hey Chris,
Were you able to ship out those parts? And have a tracking number if possible?
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, May 13, 2026 7:55 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsGarrett,
We experienced a slight delay because a machine was down, but parts are currently at anodizing. We are expediting that process, and then we anticipate two days for post-anodizing assembly & engraving. We might be able to ship it out Saturday, worst case it'll be Monday. I'll keep you posted when the parts come back from anodizing and then I should be able to confirm actual ship date.
Chris
On Wed, May 13, 2026 at 7:39 AM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Hey Chris,
Just checking if you think you’d be able to ship anything this week?
Thanks!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, April 28, 2026 4:54 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsPerfect. Thanks for confirming
On Tue, Apr 28, 2026 at 4:44 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Yeah that’s okay with me!
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, April 28, 2026 4:23 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsGarrett,
Yes. Example image below shows one side machined and the top not machined. If we machine all 4 sides they will all look like the side edge in the image below. Also, we did start with the adapters, once they are ready and in case the jigs are not I will let you know and we can do a partial shipment.
Thanks
Chris
On Tue, Apr 28, 2026 at 4:18 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Sorry, what do you mean by “Obscuring them”? would it “fog” the glass or make it not transparent?
The wafer pack adapters are a higher priority for us if possible! But no worries either way.
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, April 28, 2026 3:44 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Garrett,
Making good progress. As of now it looks like we'll ship the order the week of 05/11. We had a question about the tool holder jigs. We would prefer to machine them on multiple sides but doing so would obscure them. Reason being is that the stock material has significant tolerancing, so facing all sides would ensure greater consistency. Any objections to that?
Chris
On Tue, Apr 28, 2026 at 2:54 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Hey Chris,
Hope you are doing well! Do you have an ETA for this order? (PO#3714362)
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Chris Berger <info@turnpack.com>
Sent: Tuesday, April 7, 2026 9:03 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Subject: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Garrett, Attached is the quote for the adapters and loading jigs. Let me know if you need anything else. Chris Christopher Berger Phone: +1 [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏
SO26141038
$ 69,200.00
Expires on 05/07/2026
Hi Garrett,
Attached is the quote for the adapters and loading jigs. Let me know if you need anything else.
Chris
Christopher BergerTurnpack — Efficiency Redefined Through Automation
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--Christopher Berger
por Chris Berger - 06:01 - 1 jun. 2026 -
RE: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
I held onto that one and kept it over here! I’m not worried about the engraving issue. Would you like it back? I can use a label or engrave over here if I need it.
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Monday, June 1, 2026 2:22 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>; Ivan Arevalo <iarevalo@turnpack.com>; Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Garrett,
We got the shipment but it didn't incl. the adapter with the engraving issue. How do you want to proceed with this one?
Chris
On Wed, May 27, 2026 at 4:52 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
For sure! I’ll send a couple in the box for you to test. But yeah, I tried several of our toolholders on an older jig and a newer jig and they all showed the same issues.
I include an older jig as well (labeled) so you can compare to that as well. I’ll try to get this over and shipped out tomorrow!
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, May 27, 2026 4:45 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Garrett,
Not good, but we'll fix them no problem. We have tool holders here and tested them. The only thing I can think of is that ours are on the lower end of the diameter tolerance and yours are on the upper end. Either way send them back and we'll open them up by 130um. Can you also spare one of your toolholders to ensure we are good before returning them to you?
Chris
On Wed, May 27, 2026 at 4:35 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Sweet!
The other item that is more of a concern is that the holes that the tools sit inside of are basically the EXACT size of the tool holders themselves. I can pick up the tools in and out okay, but I have to push (with some decent force) each of the tools into the holes to fully seat them on the holder. I compared with the previous order of the tooling jigs and the tools are much easier to put into the holes and need zero force to sit correctly.
I attached a picture of the measurements I took of the holes in slot 7 on both jigs. The new order of jigs is ~130um smaller which is likely causing the seating issue. We will have a high risk of bending, rotating, or otherwise damaging the tools so we are not comfortable using these as is.
If I were to send all the jigs back, would you be able to machine a slightly larger hole? I can send a jig from a previous order to you or send an empty tool holder for you to test yourself if that helps, or I can take additional measurements as needed. We will have a high risk of bending, rotating, or otherwise damaging the tools so we are not comfortable using these as is. I definitely already rotated one of the tools as I was attempting to pull it off of the jig by hand ☹ Let me know!
Thanks!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, May 27, 2026 2:55 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Garrett,
Thanks for the update. You are correct that the set screws are adjustable to account for general tolerances of the toolbank assemblies within the machine. There are set screws for the left, right, and height adjustments. I'd suggest you dial in one and then match all the others; chances are they'll be very close. Let us know if you have any other questions.
Chris
On Wed, May 27, 2026 at 2:50 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
I looked at a few loading jigs, and testing them had some issues. I just found that the screws on either end was obstructing the loading, but I can just twist them more to fit. Each of the jigs have them twisted and sticking out at different lengths though. Is there a specific length they should be? Or should I just size them to slide easily in and out of the tool holders?
Just want to make sure these screws are for any other reason than easy loading/aligning to the tool holder itself 😊. I’ll go through the rest of them either today or tomorrow and let you know if I encounter any more issues.
Once I verify the other jigs are good to go, I’ll send the adapters back and shoot over the tracking number for you.Thanks!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, May 27, 2026 10:46 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Garrett,
Sorry about that. We do check them for flatness and vacuum seal so it would be best if you can ship them back for RCA and we'll fix it. Hope this doesn't delay your project.
Any issues with the Loading Jigs?
Chris
On Wed, May 27, 2026 at 10:34 AM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Hi Chris,
I went through the rest of the delivery and found 3 more that do not slide all the way into the tool (for a total of 4x). Physically they look similar, but may have some slight warpage issues causing these issues. Any ideas on how to fix this? I’m afraid of trying to bend them to fix the warpage. Would you like me to ship them back for you to take a look?
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Garrett Davidson
Sent: Wednesday, May 27, 2026 8:04 AM
To: Christopher Berger <cberger@turnpack.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsSorry, these are two SEPARATE adapters. I’m going through the other adapters now, and will let you know if I see any more issues!
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, May 27, 2026 7:58 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Lorena Carrillo <lcarrillo@turnpack.com>; Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Garrett,
Thanks for the info. My fault on the partially engraved one, I was supposed to let you know but fell behind. We already have a replacement for that one in queue but I wanted to ship all 20 just in case you needed the full qty right away. Is this the same adapter you are having the issue with on the suction cup or is this a different one?
Chris
On Wed, May 27, 2026 at 7:50 AM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Unsure if this sent or if the full email did not send. I received a bunch of error messages.
Please find the video up in the fileXchange if you need!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Garrett Davidson
Sent: Tuesday, May 26, 2026 6:28 PM
To: 'Lorena Carrillo' <lcarrillo@turnpack.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Turnpack, LLC SO26141038' <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Chris/Turnpack,
I started opening up the box, and found an issue with one of the adapters:
As I slide the adapter into our tool, it stops here and does not allow us to slide it all the way to the vacuum port. The adapter itself seemed warped when placed on an optical table. I checked 5 more so far from the latest shipment and they all look good! Just this one is unable to slide in. I attached a video of myself trying to push it it and it not going all the way in without me having to physically lift the adapter into place and have a high risk of “confetti-ing” components in waffle packs. Let me know if it doesn’t come through. I also uploaded into our FileXchange system for you to review. Let me know if anyone needs access to this:
One of the 5 that I looked at after this one is missing most of the writing at the bottom of the adapter itself. Not a huge deal as it’s just cosmetic to us, but did want to let you know about it:
I will go through all the rest tomorrow morning and let you know if I encounter any more like this.
Can I send this one back to you to root cause or any ideas how to fix up? I could try to bend it but unsure how brittle the adapter itself is or if I’ll make it worse.
Thanks!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Garrett Davidson
Sent: Wednesday, May 20, 2026 4:23 PM
To: Lorena Carrillo <lcarrillo@turnpack.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Turnpack, LLC SO26141038' <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsThank you!!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Wednesday, May 20, 2026 4:20 PM
To: 'Christopher Berger' <cberger@turnpack.com>; Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: 'Turnpack, LLC SO26141038' <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHello Team, the order has shipped complete today. Here is your tracking number for reference. 872056271057
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, May 19, 2026 11:18 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Garrett,
We have the adapters back from anodizing but I slightly underestimated the assembly time. We are wrapping up the assembly today and tomorrow will be for engraving and testing and then we'll ship them out tomorrow.
The toolholder jigs are complete and ready to go.
Thanks
Chris
On Mon, May 18, 2026 at 4:29 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Hey Chris,
Were you able to ship out those parts? And have a tracking number if possible?
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, May 13, 2026 7:55 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsGarrett,
We experienced a slight delay because a machine was down, but parts are currently at anodizing. We are expediting that process, and then we anticipate two days for post-anodizing assembly & engraving. We might be able to ship it out Saturday, worst case it'll be Monday. I'll keep you posted when the parts come back from anodizing and then I should be able to confirm actual ship date.
Chris
On Wed, May 13, 2026 at 7:39 AM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Hey Chris,
Just checking if you think you’d be able to ship anything this week?
Thanks!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, April 28, 2026 4:54 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsPerfect. Thanks for confirming
On Tue, Apr 28, 2026 at 4:44 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Yeah that’s okay with me!
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, April 28, 2026 4:23 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsGarrett,
Yes. Example image below shows one side machined and the top not machined. If we machine all 4 sides they will all look like the side edge in the image below. Also, we did start with the adapters, once they are ready and in case the jigs are not I will let you know and we can do a partial shipment.
Thanks
Chris
On Tue, Apr 28, 2026 at 4:18 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Sorry, what do you mean by “Obscuring them”? would it “fog” the glass or make it not transparent?
The wafer pack adapters are a higher priority for us if possible! But no worries either way.
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, April 28, 2026 3:44 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Garrett,
Making good progress. As of now it looks like we'll ship the order the week of 05/11. We had a question about the tool holder jigs. We would prefer to machine them on multiple sides but doing so would obscure them. Reason being is that the stock material has significant tolerancing, so facing all sides would ensure greater consistency. Any objections to that?
Chris
On Tue, Apr 28, 2026 at 2:54 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Hey Chris,
Hope you are doing well! Do you have an ETA for this order? (PO#3714362)
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Chris Berger <info@turnpack.com>
Sent: Tuesday, April 7, 2026 9:03 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Subject: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Garrett, Attached is the quote for the adapters and loading jigs. Let me know if you need anything else. Chris Christopher Berger Phone: +1 [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏
SO26141038
$ 69,200.00
Expires on 05/07/2026
Hi Garrett,
Attached is the quote for the adapters and loading jigs. Let me know if you need anything else.
Chris
Christopher BergerTurnpack — Efficiency Redefined Through Automation
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
por Garrett Davidson - 05:56 - 1 jun. 2026 -
RE: Turnpack, LLC Order (Ref PO26221767)
Lorena,
I will get back to you with the order acknowledgement
thanks
MICKEY MIRANDA
Customer Service Representative
FLODRAULIC
Direct 480.921.5440
Fax 480.921.3272
1150 N. FIESTA BLVD. GILBERT, AZ 85233
SWSales@flodraulicgroup.com
*** Important Notice: Send all Inquiries/Orders to our new Customer Service email address SWSales@flodraulicgroup.com***
From: Lorena Carrillo <info@turnpack.com>
Sent: Monday, June 1, 2026 2:31 PM
To: AZ Orders <azorders@flodraulicgroup.com>
Subject: Turnpack, LLC Order (Ref PO26221767)Dear Flodraulic Orders (Flodraulic) BCC Tony Please find attached purchase order PO26221767 with reference: SO2547975 amounting in $ 5,835.97 [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏
PO26221767
$ 5,835.97 due 6/1/26
Dear Flodraulic Orders (Flodraulic) BCC Tony
Please find attached purchase order PO26221767 with reference: SO2547975 amounting in $ 5,835.97 from Turnpack, LLC as well as the resale certificate, for your review and action.
The receipt is expected for 06/02/2026, if this date is not achievable, please reply with an available date for reconsideration.
**Please acknowledge the receipt of this order and lead time.Turnpack — Efficiency Redefined Through Automation
por "SWSales" <swsales@flodraulicgroup.com> - 05:47 - 1 jun. 2026
Learn more about your mail ❯
Share via: