Info Inbox

Learn More About Costco Business Center ❯

RE: Credit from Your Order PO26101646

Hi Lorena,

We will issue a refund check $62.81 for Midas Technologies' credits, and we will mail it to the address below:

Midas Technologies

10 Power Office Park, Suite 606

Woburn, MA 01801

Gabrielle

From: Info at Turnpack <info@turnpack.com>

Sent: Tuesday, April 7, 2026 10:53 AM

To: McMaster-Carr <nj.sales@mcmaster.com>

Subject: Re: Credit from Your Order PO26101646

Ok yes i figured it would just go to the Midas account but he said you would credit Turnpacks.

So to confirm you will issue a refund check to his company and not Midas.

Respectfully,
Lorena Carrillo

On Tue, Apr 7, 2026, 8:41?AM McMaster-Carr <nj.sales@mcmaster.com> wrote:

Hi Lorena,

We issued credits to Midas Technology's account. We received a phone call from George Bloom on March 26th that he would be returning some items. He was hoping we could issue credit to Turnpack's account, however, we are unable to do so since the material was purchased under Midas Technology's account. We confirmed with George that he will take a refund check for the credits.

I attached the credits for reference.

Traci

From: Info at Turnpack <info@turnpack.com>

Sent: Tuesday, April 7, 2026 8:46 AM

To: McMaster-Carr <nj.sales@mcmaster.com>

Subject: Re: Credit from Your Order PO26101646

One of our guys said that he called and explained the situation and it was okay to return.

They were purchased by our other division.

Midas Technology Inc in Woburn, MA.

Respectfully,
Lorena Carrillo

On Tue, Apr 7, 2026, 6:41?AM McMaster-Carr <nj.sales@mcmaster.com> wrote:

Hi,

Please note that the image included two items that were not ordered: 1 pack SS5S04012-100M1 and 1 pack of 4560-632-S12. I'm so sorry that we sent you items that you did not order. You were not invoiced for these items, so not credit is due for them.

For the items that you ordered, it appears that you returned lines 3, 5, 10 and 12. We previously issued issued credit for lines 3 & 12. We will issue full credit for lines 5 & 10.

Jess

From: info@turnpack.com

Sent: Monday, April 6, 2026 9:00 PM

To: 'McMaster-Carr' <nj.sales@mcmaster.com>

Subject: RE: Credit from Your Order PO26101646

We received everything in the order. We did not receive credit for all the items returned. You can see in the photo, there are 5 items but the credit memo is only for 2.

Will there be another credit memo to follow?

From: McMaster-Carr <nj.sales@mcmaster.com>
Sent: Monday, April 6, 2026 6:58 PM
To: info@turnpack.com
Subject: RE: Credit from Your Order PO26101646

Hi,

I'm sorry we didn't deliver your complete order. In order to further assist, can you confirm you only received the material on lines 3, 5, 10, and 12? Once I hear back, we'll order replacements for the remaining 16 lines.

Please note, full credit has already been issued for lines 3 and 12.

Jess

From: info@turnpack.com

Sent: Monday, April 6, 2026 8:24 PM

To: nj.sales@mcmaster.com

Subject: RE: Credit from Your Order PO26101646

Please see image of what was in the package.

How do we receive credit from the other items.

From: McMaster-Carr <invoice.reply@mcmaster.com>
Sent: Thursday, April 2, 2026 11:41 PM
To: INFO@TURNPACK.COM
Subject: Credit from Your Order PO26101646

609-689-3000
609-689-3280 (fax)
nj.sales@mcmaster.com

Credit

Billed to

TURNPACK LLC
22425 S SCOTLAND CT STE 104 [google.com]
QUEEN CREEK AZ 85142 [google.com]

Purchase Order

PO26101646

Available Credit

$(61.82)

Credit

62581451

Credit Date

4/2/26

Shipped to

George Bloom
Suite 606
10 Tower Office Park [google.com]
Woburn MA 01801 [google.com]

Mailing Address

McMaster-Carr
PO Box 7690
Chicago IL 60680-7690

Your Account

438808000

Christopher Berger placed this order.

Line

Product

Ordered

Shipped

Credited

Price

Total

3

98812A051

Brass Threaded Rod, 1/2"-20 Thread Size, 1 Foot Long, Packs of 1

D5HSVS22S

2

Packs

2

(2)

24.74

Per Pack

(49.48)

12

92095A212

18-8 Stainless Steel Button Head Hex-Drive Screw, M5 x 0.8 mm Thread Size, 16 mm Long, Packs of 50

1

Pack

1

(1)

12.34

Per Pack

(12.34)

Notes

This is a credit for purchase order PO26101646, invoice 61538179, packing list number 4162462-01.

Merchandise

(61.82)

Credit Total

$(61.82)

Federal ID 36-1458720

by "McMaster-Carr" <nj.sales@mcmaster.com> - 01:26 - 7 Apr 2026

Our New Savings Event has started

View in browser.

Savings Event

Shop Instant Savings valid through November 16.

Instant Savings Your Way!

Instant Savings on Single Serve Coffee

SAVE $20

Keurig
K-Cafe Barista Bar Single-Serve Coffee Maker and Frother with K-Cup Pods

SAVE $9

Keurig
K-Cup Pods, 80 ct

SAVE $10

Starbucks
Pike Place Coffee
Medium Roast
Keurig K-Cup Pods
72 ct

SAVE $10

Starbucks
French Roast Coffee, Dark Roast, Keurig K-Cup Pods, 72 ct

Shop All K-Cup Savings ❯

No Limit

Save on Personal Care

SAVE $4.50

Advil
Ibuprofen Liqui-Gels
120 Capsules, 2 ct

SAVE $5

Huggies
Natural Care Sensitive Baby Wipes, Unscented
Disney Baby Designs
1024 Wipes

SAVE $3

TUMS
Antacid with Calcium
Ultra Strength 1000mg
Assorted Berries
265 ct

SAVE $8

Orgain
Organic Protein Powder
21g Protein, Vanilla Bean, 2.7 lbs

Shop All Personal Care ❯

AT&T

*Ends 5/3/26. Receive $450 is a combination of $350 in bill credits ($9.73/month for 36 months)
and a $100 Digital Costco Shop Card. Terms and restrictions apply.

Shop Lettermark Paper

Tabloid Copy Paper, 92 Bright, 20 lb, White, 11” x 17”, 2500 Sheets

LetterMark 8x11

LetterMark Copy Paper with ColorLok Technology, 92 Bright, 20 lb, White, 8.5 in x 14 in, 5000 Sheets

Lettermark
Legal Copy Paper, 92 Bright, 20 lb, White, 8.5” x 14”
5000 Sheets

LetterMark 11x17

LetterMark Copy Paper with ColorLok Technology, 92 Bright, 20 lb, White, 11 in x 17 in, 2500 Sheets

Lettermark
Tabloid Copy Paper, 92 Bright, 20 lb, White, 11” x 17”
2500 Sheets

Shop All Printer Paper ❯

Discover How We Can Help Your Business

Food Service

From kitchen to customer

Office

Essential items for business, from the front desk to the break room

Convenience Stores

Expansive variety of individually packaged products ready for resale

Volume Sales

Domestic or Export

Shop Your Way

In Warehouse-SYW

In Warehouse
Shop at your local
Costco Business Center warehouse

Local Business Delivery-SYW

Local Business Delivery
Order online for delivery to your business from our Costco trucks

Same-Day Delivery-SYW

Same-Day Delivery
Order online for your business or home, powered by Instacart

Get More From Your Membership

Same Day

Auto Renewal

Costco App

Product specifications, availability and prices are subject to change without notice.

Savings Event Instant Savings are valid only April 6 - May 3, 2026 at Costco Business Center and CostcoBusinessDelivery.com. A valid Costco membership is required. State law may require sales tax to be charged on the pre-discounted price if the product is subject to sales tax. These taxes, if any, are in addition to the amount you are paying for the product. Quantities are limited. Item limits apply, per member. Instant Savings limited to inventory available from manufacturer. No rain checks will be issued for out of stock items. All Instant Savings are available for delivery unless indicated. Delivery orders must be placed online at CostcoBusinessDelivery.com or SameDay.CostcoBusinessDelivery.com to receive Instant Savings. Savings are not available on Costco.com and may not be combined with any other Instant Savings or coupon. Cigarette items are for resale only. No cash redemption.

In the past you provided Costco with your email address info@turnpack.com. Occasionally, you will receive brief advertising announcements regarding special items and services. If you prefer not to receive these advertisements, please click unsubscribe to send an email requesting to be removed.

To contact us please click here.
Costco Wholesale, Customer Service | P.O. Box 34535 -- Seattle, WA 98124-1535
© 1998-2026 Costco Wholesale Corporation. All rights reserved.Your Privacy Rights Terms and Conditions

by "Costco Business Center" <Costco@digital.costco.com> - 01:06 - 7 Apr 2026

Re: New Wafer carrier

Hi Garrett,

Doing great over here and it sounds like you guys are staying busy as well. I have definitely noticed an uptick in the Starlink ads which probably explains why you need more tooling ;)

For adapters we have tiered discounts based on quantity. 5 equals 5%, 10 equals 10%, and 20 or more get a 20% discount. I applied the same to the loading jigs as well. Hope this works for you. The quote will go out shortly.

Beyond Datacon tooling — we also build custom robotic work cells for precision dispensing, pick-and-place, and inspection. Our FactoryRobot platform achieves ±15μm placement with HALCON vision, volumetric dispense control, and SECS/GEM, allowing it to integrate directly into a fab environment. We are currently delivering systems to Tier-1 medical device OEMs for ACF bonding and flex circuit assembly. If you have any custom automation needs on that side, I'm happy to jump on a call and discuss them.

Chris

On Mon, Apr 6, 2026 at 9:39 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:

Hi Chris,

I hope you are doing well!

Can you please send us a quote for 20x of the new wafer pack adapters and the 20x of the tool bank loading jigs? Here are the part numbers and descriptions I pulled from the previous orders:

[PN25111765] Turnpack EVO 2" Gelpak Adapter 300mm - 20x 2" Gelpak locations (Suction cup Design) - Gelpak Locating notch lower right corner - Hard-coat Black Anodize
[PN24090286] Datacon EVO Toolbank Loading Jig (14-slot) Material: Clear Acrylic

We would also greatly appreciate any larger quantity discounts on these items!

Thanks,

Garrett Davidson

From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, December 16, 2025 3:41 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Nathan Granillo <nathang@turnpack.com>; Info at Turnpack <info@turnpack.com>
Subject: Re: New Wafer carrier

Will do. Thank you.

Chris

On Tue, Dec 16, 2025 at 3:40 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:

Hi,

Feel free to hold and send at the same time!

Thanks,

Garrett

From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, December 16, 2025 2:32:36 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Nathan Granillo <nathang@turnpack.com>; Info at Turnpack <info@turnpack.com>
Subject: RE: New Wafer carrier

Hi Garrett,

Quick update on the Gelpak Order. One of the plates had an anodizing defect (see below), we returned it and they are currently in the process of fixing it. We have one of the two adapters ready to ship tomorrow and the second one should ship early next week. If you are not desperate for them we can hold the first one and do one shipment for both. Let us know.

Thanks,

Chris

Christopher Berger

Phone: +1 (480) 331-1878

Cell: +1 (480) 273-4686

cberger@turnpack.com | www.turnpack.com

On Wed, Nov 12, 2025 at 9:51 AM Garrett Davidson wrote:

Hi Chris,

Can we start two of them so we can test on our side? And then sometime early next year, we will order another 10 or so of them.

We are unsure of what caused it. Some people said we received it like that, or my guess is that someone threw it into an O2 plasma asher. The other two wafers we have are all black with no discoloration, which still makes me think and O2 ash, or a solvent clean. It’s weird that it is only in certain specific areas though

Either way, it’s just cosmetic and no functional issues with it so no need to spend calories on it for now. If we see another wafer get discolored, we will dig deeper.

Thanks!

Garrett Davidson

E: garrett.davidson@spacex.com

C: +1 (425) 539 - 1448

From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, November 11, 2025 7:17 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: New Wafer carrier

Hi Garrett,

Thank you for reaching out to us regarding the new wafer carrier.

We can certainly accommodate the modification to include vacuum slots in all 20 positions, keeping all other specifications consistent with PN24110603. We will have a quote and a design ready for your review by the end of tomorrow.

To prepare the quote accurately, could you please let us know the anticipated order quantity for these carriers?

Additionally, regarding the discoloration you mentioned and showed in the attached image: we have not seen this issue with the anodizing before. Could you provide any details on the operational environment or history that might have caused it?

Thanks,

Chris

On Mon, Nov 10, 2025 at 7:09 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:

Hi Chris,

My name is Garrett Davidson, and I work at Starlink. I am looking at ordering a new wafer carrier, similar to “PN24110603”, except with all 20x slots having vacuum rather than only the top 10x slots. All the other dimensions and everything should be the same other than the additional vacuum slots. Please see the attached image and pardon the discoloration of the carrier. Are you able to send a quote and/or a design for us to review when it’s ready?

Thanks,

Garrett Davidson

E: garrett.davidson@spacex.com

C: +1 (425) 539 - 1448

--

Christopher Berger

Phone: +1 (480) 331-1878

Cell: +1 (480) 273-4686

cberger@turnpack.com | www.turnpack.com

--

Christopher Berger

Phone: +1 (480) 331-1878

Cell: +1 (480) 273-4686

cberger@turnpack.com | www.turnpack.com

--

Christopher Berger

Phone: +1 (480) 331-1878

Cell: +1 (480) 273-4686

cberger@turnpack.com | www.turnpack.com

by Chris Berger - 12:06 - 7 Apr 2026

3 attachments 3 attachments

RE: Credit from Your Order PO26101646

Hi Lorena,

We issued credits to Midas Technology's account. We received a phone call from George Bloom on March 26th that he would be returning some items. He was hoping we could issue credit to Turnpack's account, however, we are unable to do so since the material was purchased under Midas Technology's account. We confirmed with George that he will take a refund check for the credits.

I attached the credits for reference.

Traci

From: Info at Turnpack <info@turnpack.com>

Sent: Tuesday, April 7, 2026 8:46 AM

To: McMaster-Carr <nj.sales@mcmaster.com>

Subject: Re: Credit from Your Order PO26101646

One of our guys said that he called and explained the situation and it was okay to return.

They were purchased by our other division.

Midas Technology Inc in Woburn, MA.

Respectfully,
Lorena Carrillo

On Tue, Apr 7, 2026, 6:41?AM McMaster-Carr <nj.sales@mcmaster.com> wrote:

Hi,

Please note that the image included two items that were not ordered: 1 pack SS5S04012-100M1 and 1 pack of 4560-632-S12. I'm so sorry that we sent you items that you did not order. You were not invoiced for these items, so not credit is due for them.

For the items that you ordered, it appears that you returned lines 3, 5, 10 and 12. We previously issued issued credit for lines 3 & 12. We will issue full credit for lines 5 & 10.

Jess

From: info@turnpack.com

Sent: Monday, April 6, 2026 9:00 PM

To: 'McMaster-Carr' <nj.sales@mcmaster.com>

Subject: RE: Credit from Your Order PO26101646

We received everything in the order. We did not receive credit for all the items returned. You can see in the photo, there are 5 items but the credit memo is only for 2.

Will there be another credit memo to follow?

From: McMaster-Carr <nj.sales@mcmaster.com>
Sent: Monday, April 6, 2026 6:58 PM
To: info@turnpack.com
Subject: RE: Credit from Your Order PO26101646

Hi,

I'm sorry we didn't deliver your complete order. In order to further assist, can you confirm you only received the material on lines 3, 5, 10, and 12? Once I hear back, we'll order replacements for the remaining 16 lines.

Please note, full credit has already been issued for lines 3 and 12.

Jess

From: info@turnpack.com

Sent: Monday, April 6, 2026 8:24 PM

To: nj.sales@mcmaster.com

Subject: RE: Credit from Your Order PO26101646

Please see image of what was in the package.

How do we receive credit from the other items.

From: McMaster-Carr <invoice.reply@mcmaster.com>
Sent: Thursday, April 2, 2026 11:41 PM
To: INFO@TURNPACK.COM
Subject: Credit from Your Order PO26101646

609-689-3000
609-689-3280 (fax)
nj.sales@mcmaster.com

Credit

Billed to

TURNPACK LLC
22425 S SCOTLAND CT STE 104 [google.com]
QUEEN CREEK AZ 85142 [google.com]

Purchase Order

PO26101646

Available Credit

$(61.82)

Credit

62581451

Credit Date

4/2/26

Shipped to

George Bloom
Suite 606
10 Tower Office Park [google.com]
Woburn MA 01801 [google.com]

Mailing Address

McMaster-Carr
PO Box 7690
Chicago IL 60680-7690

Your Account

438808000

Christopher Berger placed this order.

Line

Product

Ordered

Shipped

Credited

Price

Total

3

98812A051

Brass Threaded Rod, 1/2"-20 Thread Size, 1 Foot Long, Packs of 1

D5HSVS22S

2

Packs

2

(2)

24.74

Per Pack

(49.48)

12

92095A212

18-8 Stainless Steel Button Head Hex-Drive Screw, M5 x 0.8 mm Thread Size, 16 mm Long, Packs of 50

1

Pack

1

(1)

12.34

Per Pack

(12.34)

Notes

This is a credit for purchase order PO26101646, invoice 61538179, packing list number 4162462-01.

Merchandise

(61.82)

Credit Total

$(61.82)

Federal ID 36-1458720

by "McMaster-Carr" <nj.sales@mcmaster.com> - 11:41 - 7 Apr 2026

RE: Quote Needed

Chris,

Perfect send me a quote and I will get back to you with a po.

Respectfully,

Gregg Lawrence

Principal Maufacturing Engineer – RF-Head & SAWs.
O: +1 978.470.9601

C: +1 781-258-1647

350 Lowell Street

Andover, MA 01810

From: info@turnpack.com <info@turnpack.com>
Sent: Tuesday, April 7, 2026 11:29 AM
To: Lawrence, Gregg A (USA) <Gregg.A.Lawrence@rtx.com>
Subject: RE: Quote Needed

Yes we can send you 8 of the old and 2 of the new if that works for you? From: Lawrence, Gregg A <Gregg. A. Lawrence@ rtx. com> Sent: Tuesday, April 7, 2026 8: 24 AM To: info@ turnpack. com Subject: RE: Quote Needed Chris, I will take the 8 that

Yes we can send you 8 of the old and 2 of the new if that works for you?

From: Lawrence, Gregg A <Gregg.A.Lawrence@rtx.com>
Sent: Tuesday, April 7, 2026 8:24 AM
To: info@turnpack.com
Subject: RE: Quote Needed

Chris,

I will take the 8 that you have, can I use the new version in my machine?

Respectfully,

Gregg Lawrence

Principal Maufacturing Engineer – RF-Head & SAWs.
O: +1 978.470.9601

C: +1 781-258-1647

350 Lowell Street

Andover, MA 01810

From: info@turnpack.com <info@turnpack.com>
Sent: Tuesday, April 7, 2026 11:21 AM
To: Lawrence, Gregg A (USA) <Gregg.A.Lawrence@rtx.com>
Subject: RE: Quote Needed

Hi Greg we have 8 of the ASH08 left in stock. Please note this is now an obsolete part with a new version available. ---------- Forwarded message --------- From: Lawrence, Gregg A <Gregg. A. Lawrence@ rtx. com> Date: Tue, Apr 7, 2026 at 8: 08

Hi Greg we have 8 of the ASH08 left in stock. Please note this is now an obsolete part with a new version available.

---------- Forwarded message ---------
From: Lawrence, Gregg A <Gregg.A.Lawrence@rtx.com>
Date: Tue, Apr 7, 2026 at 8:08 AM
Subject: RE: Quote Needed
To: Christopher Berger <cberger@turnpack.com>

Chris,

Thanks for getting back to me as soon as I see the quote I will place a PO.

Thanks again,

Gregg Lawrence

Principal Maufacturing Engineer – RF-Head & SAWs.
O: +1 978.470.9601

C: +1 781-258-1647

350 Lowell Street

Andover, MA 01810

From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, April 7, 2026 11:00 AM
To: Lawrence, Gregg A (USA) <Gregg.A.Lawrence@rtx.com>
Subject: Re: Quote Needed

Hi Gregg, Yes sorry for the delay. We are confirming lead times. I should have the quote to you today. Chris On Tue, Apr 7, 2026 at 4: 31 AM Lawrence, Gregg A <Gregg. A. Lawrence@ rtx. com> wrote: Chris, Did you receive my email? Gregg Lawrence

Hi Gregg,

Yes sorry for the delay. We are confirming lead times. I should have the quote to you today.

Chris

On Tue, Apr 7, 2026 at 4:31 AM Lawrence, Gregg A <Gregg.A.Lawrence@rtx.com> wrote:

Chris,

Did you receive my email?

Gregg Lawrence

Principal Maufacturing Engineer – RF-Head & SAWs.
O: +1 978.470.9601

C: +1 781-258-1647

Gregg.A.Lawrence@rtx.com

350 Lowell Street

Andover, MA 01810

From: Lawrence, Gregg A (USA)
Sent: Monday, March 30, 2026 3:03 PM
To: Christopher Berger <cberger@turnpack.com>
Subject: Quote Needed

Christopher,

Can you please provide me with a quote for the following:

10 each ASH08 Asynchronous Helix Tool, Tin Coated

Respectfully,

Gregg Lawrence

Principal Maufacturing Engineer – RF-Head & SAWs.
O: +1 978.470.9601

C: +1 781-258-1647

Gregg.A.Lawrence@rtx.com

350 Lowell Street

Andover, MA 01810

--

Christopher Berger

Phone: +1 (480) 331-1878

Cell: +1 (480) 273-4686

--

Christopher Berger

Phone: +1 (480) 331-1878

Cell: +1 (480) 273-4686

by Gregg Lawrence - 11:37 - 7 Apr 2026

RE: Quote Needed

Chris,

I will take the 8 that you have, can I use the new version in my machine?

Respectfully,

Gregg Lawrence

Principal Maufacturing Engineer – RF-Head & SAWs.
O: +1 978.470.9601

C: +1 781-258-1647

350 Lowell Street

Andover, MA 01810

From: info@turnpack.com <info@turnpack.com>
Sent: Tuesday, April 7, 2026 11:21 AM
To: Lawrence, Gregg A (USA) <Gregg.A.Lawrence@rtx.com>
Subject: RE: Quote Needed

Hi Greg we have 8 of the ASH08 left in stock. Please note this is now an obsolete part with a new version available. ---------- Forwarded message --------- From: Lawrence, Gregg A <Gregg. A. Lawrence@ rtx. com> Date: Tue, Apr 7, 2026 at 8: 08

Hi Greg we have 8 of the ASH08 left in stock. Please note this is now an obsolete part with a new version available.

---------- Forwarded message ---------
From: Lawrence, Gregg A <Gregg.A.Lawrence@rtx.com>
Date: Tue, Apr 7, 2026 at 8:08 AM
Subject: RE: Quote Needed
To: Christopher Berger <cberger@turnpack.com>

Chris,

Thanks for getting back to me as soon as I see the quote I will place a PO.

Thanks again,

Gregg Lawrence

Principal Maufacturing Engineer – RF-Head & SAWs.
O: +1 978.470.9601

C: +1 781-258-1647

350 Lowell Street

Andover, MA 01810

From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, April 7, 2026 11:00 AM
To: Lawrence, Gregg A (USA) <Gregg.A.Lawrence@rtx.com>
Subject: Re: Quote Needed

Hi Gregg, Yes sorry for the delay. We are confirming lead times. I should have the quote to you today. Chris On Tue, Apr 7, 2026 at 4: 31 AM Lawrence, Gregg A <Gregg. A. Lawrence@ rtx. com> wrote: Chris, Did you receive my email? Gregg Lawrence

Hi Gregg,

Yes sorry for the delay. We are confirming lead times. I should have the quote to you today.

Chris

On Tue, Apr 7, 2026 at 4:31 AM Lawrence, Gregg A <Gregg.A.Lawrence@rtx.com> wrote:

Chris,

Did you receive my email?

Gregg Lawrence

Principal Maufacturing Engineer – RF-Head & SAWs.
O: +1 978.470.9601

C: +1 781-258-1647

Gregg.A.Lawrence@rtx.com

350 Lowell Street

Andover, MA 01810

From: Lawrence, Gregg A (USA)
Sent: Monday, March 30, 2026 3:03 PM
To: Christopher Berger <cberger@turnpack.com>
Subject: Quote Needed

Christopher,

Can you please provide me with a quote for the following:

10 each ASH08 Asynchronous Helix Tool, Tin Coated

Respectfully,

Gregg Lawrence

Principal Maufacturing Engineer – RF-Head & SAWs.
O: +1 978.470.9601

C: +1 781-258-1647

Gregg.A.Lawrence@rtx.com

350 Lowell Street

Andover, MA 01810

--

Christopher Berger

Phone: +1 (480) 331-1878

Cell: +1 (480) 273-4686

--

Christopher Berger

Phone: +1 (480) 331-1878

Cell: +1 (480) 273-4686

by Gregg Lawrence - 11:26 - 7 Apr 2026

lcarrillo@turnpack.com | www.turnpack.com
https://www.turnpack.com/midas-rework/delidder

RE: SO26041012 quote

Good morning, Lorena.

I added another line to the quote showing the price if you supply the material.

Yes, the large price difference is a reflection of us supplying the material. Material pricing has skyrocketed over the past few months.

If you are able to purchase the material yourself at a good price, I would recommend that route.

You may get a better price if you buy bulk and hold it in stock for future releases.

Andy

Andy McNeil

Inside Sales Manager

ARCH Cutting Tools ‑ Maine

Telephone:

(207) 625-4000

Please note that our email addresses have changed from @archgp.com to @archct.com.

From: info@turnpack.com <info@turnpack.com>
Sent: Monday, April 6, 2026 5:17 PM
To: Andy McNeil <Andy.McNeil@archct.com>
Subject: RE: SO26041012 quote

Want to confirm its 26. 50 when we supply the tooling and 72. 60 when you supply? Is there a reason for the high difference or something we can do to lower the price? Maybe if we order more blanks and you’re able to store and we can order what

Want to confirm its 26.50 when we supply the tooling and 72.60 when you supply? Is there a reason for the high difference or something we can do to lower the price?

Maybe if we order more blanks and you’re able to store and we can order what specific part we need as needed? Open to other ideas?

Is it just easier for you if we outsource the 8mm part elsewhere?

From: Andy McNeil <Andy.McNeil@archct.com>
Sent: Monday, April 6, 2026 12:22 PM
To: info@turnpack.com
Subject: RE: SO26041012 quote

I have attached quote#3209.

Thank you.

Andy

Andy McNeil

Inside Sales Manager

ARCH Cutting Tools ‑ Maine

Telephone:

(207) 625-4000

Please note that our email addresses have changed from @archgp.com to @archct.com.

From: info@turnpack.com <info@turnpack.com>
Sent: Monday, April 6, 2026 3:07 PM
To: Andy McNeil <Andy.McNeil@archct.com>
Subject: RE: SO26041012 quote

Good question! I don’t think we have that many left. So since this is for a specific customer we may drop ship to lets say you supply everything. From: Andy McNeil <Andy. McNeil@ archct. com> Sent: Monday, April 6, 2026 12: 02 PM To: info@ turnpack. com

Good question! I don’t think we have that many left. So since this is for a specific customer we may drop ship to lets say you supply everything.

From: Andy McNeil <Andy.McNeil@archct.com>
Sent: Monday, April 6, 2026 12:02 PM
To: info@turnpack.com
Subject: RE: SO26041012 quote

Hi Lorena.

Are you supplying the material for this one, or are we?

Andy

Andy McNeil

Inside Sales Manager

ARCH Cutting Tools ‑ Maine

Telephone:

(207) 625-4000

Please note that our email addresses have changed from @archgp.com to @archct.com.

From: info@turnpack.com <info@turnpack.com>
Sent: Monday, April 6, 2026 2:57 PM
To: Andy.McNeil@archgp.com
Subject: SO26041012 quote

Please price and lead time for 100 ASH08SF Lorena Carrillo Office Manager Office: 480-331-1878 Line: 781-938-0069 22425 S Scotland Ct, Suite104, Queen Creek, AZ 85142 lcarrillo@ turnpack. com | www. turnpack. com https: //www. turnpack. com/midas-rework/delidder

Please price and lead time for 100 ASH08SF

Lorena Carrillo

Office Manager

Office: 480-331-1878
Line: 781-938-0069

22425 S Scotland Ct, Suite104, Queen Creek, AZ 85142

by "Andy McNeil" <Andy.McNeil@archct.com> - 07:51 - 7 Apr 2026

5 attachments 5 attachments

Dmarc Aggregate Report Domain: {turnpack.com} Submitter: {Amazon SES} Date: {2026-04-06} Report-ID: {f1d089a6-6266-4d97-935d-2b46e95ed2b2}

This MIME email was sent through Amazon SES.

by postmaster@amazonses.com - 07:11 - 7 Apr 2026

2 attachments 2 attachments

Invoice for Your Order PO26131684

562-692-5911
562-695-2323 (fax)
la.sales@mcmaster.com

Invoice

Billed to

TURNPACK LLC
22425 S SCOTLAND CT STE 104
QUEEN CREEK AZ 85142

Purchase Order	PO26131684
Total	$472.33
Invoice	62744050
Invoice Date	4/6/26
Payment Terms	2% 10, Net 30
Deduct $8.76 on merchandise if paid by 4/16/26.

Shipped to

Attention: Suite 104

Turnpack LLC
22425 S Scotland CT Ste 104
Queen Creek AZ 85142

Mail Payment to	McMaster-Carr PO Box 7690 Chicago IL 60680-7690
Your Account	438808000

Christopher Berger placed this order.

Line		Product	Ordered	Shipped	Price	Total
1	7561K57	Steel Indoor-Only Enclosure with Hinged Cover, 20" x 12" x 6", Gray	1 Each	1	225.26 Each	225.26
2	7561K331	18-1/4" x 10-1/4" Steel Panel for Steel Indoor-Only Enclosure	1 Each	1	32.21 Each	32.21
3	5537T303	T-Slotted Framing, End Cap for 90 mm High Double Rail, Black	2 Each	2	2.96 Each	5.92
4	5537T952	T-Slotted Framing, Silver Surface Bracket for 45mm Rail, 6-7/8" Long	2 Each	2	11.92 Each	23.84
5	5537T961	T-Slotted Framing, Silver Surface Bracket for 90 mm High Rail, 6-7/8" Long	4 Each	4	19.29 Each	77.16
6	5537T357	Tie Cable Holder for 45 mm High Single Rail T-Slotted Framing	4 Each	4	1.51 Each	6.04
7	6350K35	3/8"-8 Thread Flange Nut for Fast-Travel Ultra-Precision Lead Screw H5JAAP34S	1 Each	1	35.56 Each	35.56
8	6350K172	3/8"-20 Thread Size Flange Nut for Ultra-Precision Lead Screw H5BASP21S	1 Each	1	32.18 Each	32.18

Merchandise	438.17
Shipping	34.16
Total	$472.33

Packing List	Shipped	Weight	Carrier	Tracking
5290999-02	04/04/2026	23 lb	UPS	1Z0526850313657431	Received by Turnpak 4/6/26.
5290999-01	04/04/2026	4 lb	FedEx	515798233105	Received by L.Lunze 4/6/26.

Federal ID 36-1458720

by "McMaster-Carr" <invoice.reply@mcmaster.com> - 02:51 - 7 Apr 2026

RE: Thank you for your payment

Hi Lorena,

Unfortunately the quote you signed is legally binding and thus a refund cannot be processed, by adding your card to our system and signing the quoting you gave us authorisation to charge that card.

If there is anything else we can help with please let us know.

Cheers,

Jason Bowes

Chief Operating Officer

+44 7506 126 587

|

www.cloudnc.com

1 Norton Folgate, Spitalfields,.London.E1.6DB

On Tue, Apr 07, 2026 at 00:38:55, <info@turnpack.com> wrote:

Thank you for the response.
Unfortunately, automatic billing was not approved or requested. Your system also has locked the credit card in place so it cannot be edited. If automatic billing had been approved I would not have had to go in and manually process the payment nor would you be going in this long afterwards and charging invoices out of sequence.
Again, a refund on this card will need to be processed by April 10 2026 or a fraud claim will be placed and reported to American Express.
Thank you.

From: Lena Padaruth <lena.padaruth@cloudnc.com>
Sent: Monday, March 30, 2026 2:43 AM
To: Info at Turnpack <info@turnpack.com>; CloudNC <cloudnc@cloudnc.com>
Subject: Re: Thank you for your payment

Hi Lorena,

Thank you for reaching out and sharing your concerns, I’m sorry for any frustration this situation has caused.
I’d like to clarify that the charges in question were processed in line with the signed agreement as attached, which includes a 12-month commitment. In addition, the card details were entered directly into our system at the start of the engagement, which enabled automatic billing against that card in accordance with the agreed payment terms.
We’d be very happy to talk this through with you and make sure everything is fully clear, and I apologise for any inconvenience this may have caused you once again.

Kind regards,

Lena Padaruth
Management Accountant
+44 7534225909
|
www.cloudnc.com

From: cloudnc@cloudnc.com <cloudnc@cloudnc.com> on behalf of Info at Turnpack <info@turnpack.com>
Date: Friday, 27 March 2026 at 19:00
To: CloudNC <cloudnc@cloudnc.com>
Subject: Re: Thank you for your payment
These payments were not approved and credit card was charged without authorization.

These 3 charges need to be refunded and reversed immediately.

American express will be contacted and informed that we are NOT initiating these charges.

Respectfully,
Lorena Carrillo

On Fri, Mar 27, 2026, 7:59 AM CloudNC <cloudnc@cloudnc.com> wrote:

Thank you for your payment!
Hey Chris Berger,
Thank you for your payment.

To get started with CAM Assist, please click here.

We are offering a free month to you and anyone who you refer to CAM Assist!

Give them your unique link to get started today:
https://www.cloudnc.com/start2?referral_email=info@birchmfg.com

Once they pay for their first month both of you will receive that value as a credit on your account.

Subscription email: info@birchmfg.com

If you have questions about your subscription, or would just like to chat, contact us at any time. We'd love to hear from you.

View payments, update them or manage your account on your customer portal.
Log into your account now →

PS: We hope you're enjoying your experience with us! As always, feel free to reach out to us. We'd love to hear from you.

--
You received this message because you are subscribed to the Google Groups "Cam Assist" group.
To unsubscribe from this group and stop receiving emails from it, send an email to cloudnc+unsubscribe@cloudnc.com.
To view this discussion, visit https://groups.google.com/a/cloudnc.com/d/msgid/cloudnc/CAKb9bM5j3G1SQkgKm1FLECW5V3vKCFUNEpu5gEc-o4nM%3D%3D-p0A%40mail.gmail.com.
For more options, visit https://groups.google.com/a/cloudnc.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "Cam Assist" group.
To unsubscribe from this group and stop receiving emails from it, send an email to cloudnc+unsubscribe@cloudnc.com.
To view this discussion, visit https://groups.google.com/a/cloudnc.com/d/msgid/cloudnc/00b001dcc61e%2489b5e4f0%249d21aed0%24%40turnpack.com.
For more options, visit https://groups.google.com/a/cloudnc.com/d/optout.

by "Jason Bowes" <jason.bowes@cloudnc.com> - 01:36 - 7 Apr 2026

4 attachments 4 attachments

RE: New Wafer carrier

Hi Chris,

I hope you are doing well!

Can you please send us a quote for 20x of the new wafer pack adapters and the 20x of the tool bank loading jigs? Here are the part numbers and descriptions I pulled from the previous orders:

[PN25111765] Turnpack EVO 2" Gelpak Adapter 300mm - 20x 2" Gelpak locations (Suction cup Design) - Gelpak Locating notch lower right corner - Hard-coat Black Anodize
[PN24090286] Datacon EVO Toolbank Loading Jig (14-slot) Material: Clear Acrylic

We would also greatly appreciate any larger quantity discounts on these items!

Thanks,

Garrett Davidson

From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, December 16, 2025 3:41 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Nathan Granillo <nathang@turnpack.com>; Info at Turnpack <info@turnpack.com>
Subject: Re: New Wafer carrier

Will do. Thank you.

Chris

On Tue, Dec 16, 2025 at 3:40 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:

Hi,

Feel free to hold and send at the same time!

Thanks,

Garrett

From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, December 16, 2025 2:32:36 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>; Nathan Granillo <nathang@turnpack.com>; Info at Turnpack <info@turnpack.com>
Subject: RE: New Wafer carrier

Hi Garrett,

Quick update on the Gelpak Order. One of the plates had an anodizing defect (see below), we returned it and they are currently in the process of fixing it. We have one of the two adapters ready to ship tomorrow and the second one should ship early next week. If you are not desperate for them we can hold the first one and do one shipment for both. Let us know.

Thanks,

Chris

Christopher Berger

Phone: +1 (480) 331-1878

Cell: +1 (480) 273-4686

cberger@turnpack.com | www.turnpack.com

On Wed, Nov 12, 2025 at 9:51 AM Garrett Davidson wrote:

Hi Chris,

Can we start two of them so we can test on our side? And then sometime early next year, we will order another 10 or so of them.

We are unsure of what caused it. Some people said we received it like that, or my guess is that someone threw it into an O2 plasma asher. The other two wafers we have are all black with no discoloration, which still makes me think and O2 ash, or a solvent clean. It’s weird that it is only in certain specific areas though

Either way, it’s just cosmetic and no functional issues with it so no need to spend calories on it for now. If we see another wafer get discolored, we will dig deeper.

Thanks!

Garrett Davidson

E: garrett.davidson@spacex.com

C: +1 (425) 539 - 1448

From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, November 11, 2025 7:17 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Brandon Benavidez <bbenavidez@turnpack.com>
Subject: Re: New Wafer carrier

Hi Garrett,

Thank you for reaching out to us regarding the new wafer carrier.

We can certainly accommodate the modification to include vacuum slots in all 20 positions, keeping all other specifications consistent with PN24110603. We will have a quote and a design ready for your review by the end of tomorrow.

To prepare the quote accurately, could you please let us know the anticipated order quantity for these carriers?

Additionally, regarding the discoloration you mentioned and showed in the attached image: we have not seen this issue with the anodizing before. Could you provide any details on the operational environment or history that might have caused it?

Thanks,

Chris

On Mon, Nov 10, 2025 at 7:09 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:

Hi Chris,

My name is Garrett Davidson, and I work at Starlink. I am looking at ordering a new wafer carrier, similar to “PN24110603”, except with all 20x slots having vacuum rather than only the top 10x slots. All the other dimensions and everything should be the same other than the additional vacuum slots. Please see the attached image and pardon the discoloration of the carrier. Are you able to send a quote and/or a design for us to review when it’s ready?

Thanks,

Garrett Davidson

E: garrett.davidson@spacex.com

C: +1 (425) 539 - 1448

--

Christopher Berger

Phone: +1 (480) 331-1878

Cell: +1 (480) 273-4686

cberger@turnpack.com | www.turnpack.com

--

Christopher Berger

Phone: +1 (480) 331-1878

Cell: +1 (480) 273-4686

by Garrett Davidson - 12:41 - 7 Apr 2026

OEI Invoice _946583_Inv#_3517445_Turnkey Packaging Solutions LLC

by IT.Department@omron.com - 12:26 - 7 Apr 2026