Archives
Info Inbox
info@turnpack.com
-
Semiconductor Equipment: The Case for Standard Products With Proof-of-Concept Designs
Semiconductor Equipment: The Case for Standard Products With Proof-of-Concept Designs
During the initial stages of designing a semiconductor manufacturing tool, it’s natural to want to produce a fast proof of concept (POC). And when it comes to integrating a motion component while proving that concept, designers tend to begin with stainless steel parts.
In our previous blog post on semiconductor manufacturing, we provided an overview of some of the most common motion products used for cutting-edge applications and the features that make them ideal for this demanding industry. This blog post will explain why it pays to use standard products made from carbon steel early in a design’s development before moving forward with custom stainless steel parts.IKO Fast Tracks Delivery of Ball-Screw Driven Positioning Tables
IKO has launched a new production and stocking program — FastTrack — to deliver or make popular TU and TE Series ball-screw driven positioning tables in as little as two weeks. Other products are also negotiable. With FastTrack, you can avoid the sometimes inconvenient lead times that may otherwise occur with standard order fulfillment options.
by "IKO International, Inc." <eco+ikonet.co.jp.128@2164376.emcampaign.com> - 11:07 - 27 May 2026 -
Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Hi Garrett,Thanks for the info. My fault on the partially engraved one, I was supposed to let you know but fell behind. We already have a replacement for that one in queue but I wanted to ship all 20 just in case you needed the full qty right away. Is this the same adapter you are having the issue with on the suction cup or is this a different one?ChrisOn Wed, May 27, 2026 at 7:50 AM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:Unsure if this sent or if the full email did not send. I received a bunch of error messages.
Please find the video up in the fileXchange if you need!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Garrett Davidson
Sent: Tuesday, May 26, 2026 6:28 PM
To: 'Lorena Carrillo' <lcarrillo@turnpack.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Turnpack, LLC SO26141038' <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Chris/Turnpack,
I started opening up the box, and found an issue with one of the adapters:
As I slide the adapter into our tool, it stops here and does not allow us to slide it all the way to the vacuum port. The adapter itself seemed warped when placed on an optical table. I checked 5 more so far from the latest shipment and they all look good! Just this one is unable to slide in. I attached a video of myself trying to push it it and it not going all the way in without me having to physically lift the adapter into place and have a high risk of “confetti-ing” components in waffle packs. Let me know if it doesn’t come through. I also uploaded into our FileXchange system for you to review. Let me know if anyone needs access to this:
One of the 5 that I looked at after this one is missing most of the writing at the bottom of the adapter itself. Not a huge deal as it’s just cosmetic to us, but did want to let you know about it:
I will go through all the rest tomorrow morning and let you know if I encounter any more like this.
Can I send this one back to you to root cause or any ideas how to fix up? I could try to bend it but unsure how brittle the adapter itself is or if I’ll make it worse.
Thanks!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Garrett Davidson
Sent: Wednesday, May 20, 2026 4:23 PM
To: Lorena Carrillo <lcarrillo@turnpack.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Turnpack, LLC SO26141038' <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsThank you!!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Wednesday, May 20, 2026 4:20 PM
To: 'Christopher Berger' <cberger@turnpack.com>; Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: 'Turnpack, LLC SO26141038' <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHello Team, the order has shipped complete today. Here is your tracking number for reference. 872056271057
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, May 19, 2026 11:18 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Garrett,
We have the adapters back from anodizing but I slightly underestimated the assembly time. We are wrapping up the assembly today and tomorrow will be for engraving and testing and then we'll ship them out tomorrow.
The toolholder jigs are complete and ready to go.
Thanks
Chris
On Mon, May 18, 2026 at 4:29 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Hey Chris,
Were you able to ship out those parts? And have a tracking number if possible?
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, May 13, 2026 7:55 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsGarrett,
We experienced a slight delay because a machine was down, but parts are currently at anodizing. We are expediting that process, and then we anticipate two days for post-anodizing assembly & engraving. We might be able to ship it out Saturday, worst case it'll be Monday. I'll keep you posted when the parts come back from anodizing and then I should be able to confirm actual ship date.
Chris
On Wed, May 13, 2026 at 7:39 AM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Hey Chris,
Just checking if you think you’d be able to ship anything this week?
Thanks!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, April 28, 2026 4:54 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsPerfect. Thanks for confirming
On Tue, Apr 28, 2026 at 4:44 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Yeah that’s okay with me!
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, April 28, 2026 4:23 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsGarrett,
Yes. Example image below shows one side machined and the top not machined. If we machine all 4 sides they will all look like the side edge in the image below. Also, we did start with the adapters, once they are ready and in case the jigs are not I will let you know and we can do a partial shipment.
Thanks
Chris
On Tue, Apr 28, 2026 at 4:18 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Sorry, what do you mean by “Obscuring them”? would it “fog” the glass or make it not transparent?
The wafer pack adapters are a higher priority for us if possible! But no worries either way.
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, April 28, 2026 3:44 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Garrett,
Making good progress. As of now it looks like we'll ship the order the week of 05/11. We had a question about the tool holder jigs. We would prefer to machine them on multiple sides but doing so would obscure them. Reason being is that the stock material has significant tolerancing, so facing all sides would ensure greater consistency. Any objections to that?
Chris
On Tue, Apr 28, 2026 at 2:54 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Hey Chris,
Hope you are doing well! Do you have an ETA for this order? (PO#3714362)
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Chris Berger <info@turnpack.com>
Sent: Tuesday, April 7, 2026 9:03 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Subject: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Garrett, Attached is the quote for the adapters and loading jigs. Let me know if you need anything else. Chris Christopher Berger Phone: +1 [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏
SO26141038
$ 69,200.00
Expires on 05/07/2026
Hi Garrett,
Attached is the quote for the adapters and loading jigs. Let me know if you need anything else.
Chris
Christopher BergerTurnpack — Efficiency Redefined Through Automation
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--Christopher Berger
by Chris Berger - 11:01 - 27 May 2026 -
RE: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading Jigs
Unsure if this sent or if the full email did not send. I received a bunch of error messages.
Please find the video up in the fileXchange if you need!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Garrett Davidson
Sent: Tuesday, May 26, 2026 6:28 PM
To: 'Lorena Carrillo' <lcarrillo@turnpack.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Turnpack, LLC SO26141038' <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Chris/Turnpack,
I started opening up the box, and found an issue with one of the adapters:
As I slide the adapter into our tool, it stops here and does not allow us to slide it all the way to the vacuum port. The adapter itself seemed warped when placed on an optical table. I checked 5 more so far from the latest shipment and they all look good! Just this one is unable to slide in. I attached a video of myself trying to push it it and it not going all the way in without me having to physically lift the adapter into place and have a high risk of “confetti-ing” components in waffle packs. Let me know if it doesn’t come through. I also uploaded into our FileXchange system for you to review. Let me know if anyone needs access to this:
One of the 5 that I looked at after this one is missing most of the writing at the bottom of the adapter itself. Not a huge deal as it’s just cosmetic to us, but did want to let you know about it:
I will go through all the rest tomorrow morning and let you know if I encounter any more like this.
Can I send this one back to you to root cause or any ideas how to fix up? I could try to bend it but unsure how brittle the adapter itself is or if I’ll make it worse.
Thanks!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Garrett Davidson
Sent: Wednesday, May 20, 2026 4:23 PM
To: Lorena Carrillo <lcarrillo@turnpack.com>; 'Christopher Berger' <cberger@turnpack.com>
Cc: 'Turnpack, LLC SO26141038' <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsThank you!!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Lorena Carrillo <lcarrillo@turnpack.com>
Sent: Wednesday, May 20, 2026 4:20 PM
To: 'Christopher Berger' <cberger@turnpack.com>; Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: 'Turnpack, LLC SO26141038' <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHello Team, the order has shipped complete today. Here is your tracking number for reference. 872056271057
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, May 19, 2026 11:18 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>; Ryan Chin <Ryan.Chin@spacex.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Garrett,
We have the adapters back from anodizing but I slightly underestimated the assembly time. We are wrapping up the assembly today and tomorrow will be for engraving and testing and then we'll ship them out tomorrow.
The toolholder jigs are complete and ready to go.
Thanks
Chris
On Mon, May 18, 2026 at 4:29 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Hey Chris,
Were you able to ship out those parts? And have a tracking number if possible?
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Wednesday, May 13, 2026 7:55 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsGarrett,
We experienced a slight delay because a machine was down, but parts are currently at anodizing. We are expediting that process, and then we anticipate two days for post-anodizing assembly & engraving. We might be able to ship it out Saturday, worst case it'll be Monday. I'll keep you posted when the parts come back from anodizing and then I should be able to confirm actual ship date.
Chris
On Wed, May 13, 2026 at 7:39 AM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Hey Chris,
Just checking if you think you’d be able to ship anything this week?
Thanks!
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, April 28, 2026 4:54 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsPerfect. Thanks for confirming
On Tue, Apr 28, 2026 at 4:44 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Yeah that’s okay with me!
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, April 28, 2026 4:23 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsGarrett,
Yes. Example image below shows one side machined and the top not machined. If we machine all 4 sides they will all look like the side edge in the image below. Also, we did start with the adapters, once they are ready and in case the jigs are not I will let you know and we can do a partial shipment.
Thanks
Chris
On Tue, Apr 28, 2026 at 4:18 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Sorry, what do you mean by “Obscuring them”? would it “fog” the glass or make it not transparent?
The wafer pack adapters are a higher priority for us if possible! But no worries either way.
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Christopher Berger <cberger@turnpack.com>
Sent: Tuesday, April 28, 2026 3:44 PM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Cc: Turnpack, LLC SO26141038 <catchall@turnpack.com>
Subject: Re: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Garrett,
Making good progress. As of now it looks like we'll ship the order the week of 05/11. We had a question about the tool holder jigs. We would prefer to machine them on multiple sides but doing so would obscure them. Reason being is that the stock material has significant tolerancing, so facing all sides would ensure greater consistency. Any objections to that?
Chris
On Tue, Apr 28, 2026 at 2:54 PM Garrett Davidson <Garrett.Davidson@spacex.com> wrote:
Hey Chris,
Hope you are doing well! Do you have an ETA for this order? (PO#3714362)
Thanks,
Garrett Davidson
MicroElectronics Hardware Development Engineer
+1 (425) 539 - 1448
From: Chris Berger <info@turnpack.com>
Sent: Tuesday, April 7, 2026 9:03 AM
To: Garrett Davidson <Garrett.Davidson@spacex.com>
Subject: Turnpack, LLC Quotation (Ref SO26141038) - Gelpak Adapters and Loading JigsHi Garrett, Attached is the quote for the adapters and loading jigs. Let me know if you need anything else. Chris Christopher Berger Phone: +1 [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏
SO26141038
$ 69,200.00
Expires on 05/07/2026
Hi Garrett,
Attached is the quote for the adapters and loading jigs. Let me know if you need anything else.
Chris
Christopher BergerTurnpack — Efficiency Redefined Through Automation
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
--
Christopher Berger
by Garrett Davidson - 10:51 - 27 May 2026 -
FedEx Billing Online - Invoice Ready for Payment
You have a FedEx invoice ready for payment. Pay now. 
Your invoice is ready for payment Dear christopher berger, Your account ending in 6805 has a new invoice(s) from FedEx ready for payment. Invoice number: Invoice amount: 9-314-32716 36.10 Log in to FedEx® Billing Online to review and pay your invoices. Log In Thank you for your business, FedEx Note: Please do not use this email to submit payment. This email may not be used as a remittance notice. To pay your invoices, please visit FedEx Billing Online. ©2026 FedEx.The content of this message is protected by copyright and trademark laws under U.S. and international law.
Review our privacy policy. All rights reserved.
This message has been sent by an auto responder system. Please do not reply to this message.
ID ENS- 2356
by "BillingOnline" <BillingOnline@fedex.com> - 10:08 - 27 May 2026 -
RE: Turnpack, LLC Invoice (Ref INV/2026/02/0003) ACCOUNT ON CREDIT HOLD
Hello,
Check #1014 was mailed on 05/07/2026.
From: info@turnpack.com <info@turnpack.com>
Sent: Friday, May 22, 2026 8:56 PM
To: IRassoc IRA (Shared) <irassoc@irassociates.com>
Subject: RE: Turnpack, LLC Invoice (Ref INV/2026/02/0003) ACCOUNT ON CREDIT HOLDThis invoice is still not paid as of todays date. I need payment status right away.
From: info@turnpack.com <info@turnpack.com>
Sent: Monday, April 6, 2026 2:28 PM
To: irassoc@irassociates.com
Subject: RE: Turnpack, LLC Invoice (Ref INV/2026/02/0003) ACCOUNT ON CREDIT HOLDplease see attached per your request.
From: IRassoc IRA (Shared) <info@turnpack.com>
Sent: Monday, April 6, 2026 12:37 PM
To: Info Inbox <info@turnpack.com>
Subject: RE: Turnpack, LLC Invoice (Ref INV/2026/02/0003) ACCOUNT ON CREDIT HOLDCould you please forward the original email as I am not seeing it? If there is an issue with my email I will need to forward to our IT department.
From: info@turnpack.com <info@turnpack.com>
Sent: Monday, April 6, 2026 2:50 PM
To: IRassoc IRA (Shared) <IRassoc@us.vigophotonics.com>
Subject: RE: Turnpack, LLC Invoice (Ref INV/2026/02/0003) ACCOUNT ON CREDIT HOLDIt was sent to this same address as always.
From: IRassoc IRA (Shared) <IRassoc@us.vigophotonics.com>
Sent: Friday, April 3, 2026 5:29 AM
To: Turnpack, LLC INV/2026/02/0003 (25-11837) <catchall@turnpack.com>
Subject: RE: Turnpack, LLC Invoice (Ref INV/2026/02/0003) ACCOUNT ON CREDIT HOLDHi Lorena,
It appears that this is our first time receiving this invoice, could you please forward the original invoice email as I would like to confirm the email address is correct. Thank you.
From: Lorena Carrillo <info@turnpack.com>
Sent: Thursday, April 2, 2026 5:40 PM
To: IRassoc IRA (Shared) <irassoc@irassociates.com>
Subject: Turnpack, LLC Invoice (Ref INV/2026/02/0003) ACCOUNT ON CREDIT HOLDDear Accounts Payable (Infrared Associates), Please see attached invoice INV/2026/02/0003 (with reference: SO2534933) amounting in $ 146.26 from [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏
INV/2026/02/0003
$ 146.26 due 3/7/26
Dear Accounts Payable (Infrared Associates),
Please see attached invoice INV/2026/02/0003 (with reference: SO2534933) amounting in $ 146.26 from Turnpack, LLC. Please remit payment at your earliest convenience.
Please use the following communication for your payment: INV/2026/02/0003.If you have received this email in error, please reply with the proper contact.
Please reply to this email or resend an email to info@turnpack.com, with any questions, comments, or concerns regarding your order.Your prompt payment is greatly appreciated. To avoid any interest or penalties on invoices over the stated payment terms, please remit payment by date stated on your invoice.
If payment has not been received by the 5th late business day an APR of 7.75% will be charged daily until payment in full has been received. Client is responsible for all collection costs deemed reasonable by Turnpack.NOTE: while ACH is our preferred payment method we do accepts checks. Please make check payable to: "Turnpack LLC" and mail to the new address below. Credit card is accepted upon request with a 3.6% fee.
Please note change of Address:
22425 S Scotland Ct
Suite 104
Queen Creek, AZ 85142Turnpack — Efficiency Redefined Through Automation
by "IRassoc IRA (Shared)" <IRassoc@us.vigophotonics.com> - 10:02 - 27 May 2026 -
7D PO 260069 status?
Hi Chris,
Can you please update us on status of PO 260069?
Also, did I mention we have Qty 1 of the 0160216-A Brass bushing with a bad thread. Are you able to add Qty 1 to this PO or next open PO 260099 to replace this bad unit?
Thanks very much,
Greg
GREG FRASER 55 Fleming Drive
Lead Hardware Engineer Units 13-17, Cambridge, ON
(226) 606-3126 Canada N1T 2A9
by Greg Fraser - 09:07 - 27 May 2026 -
All your curing needs at light speed.
All your curing needs at light speed.
Bond at the speed of light with LED-curable adhesives
designed to accelerate medical device assembly while
delivering strength, flexibility and reliability.
High Strength
Deliver reliable, long-lasting bonds for demanding applications.
Low Viscosity
Work with precise dispensing to improve accuracy and consistency.
Fast &
Tack FreeGet immediate handling to keep production moving efficiently.
SO 10993 Compliant
Tested to Henkel’s protocols based on biocompatibility standards.
Bond at the speed of light.
LOCTITE® Light Curing Adhesives for Medical Assembly.
R.S. Hughes delivers the certainty your business needs to thrive. With top-tier products, tailored solutions and a commitment to putting customers and supplier partners first, we help you succeed at every step.
Discover how our SupplySight™ Inventory Management Program can drive cost savings and
streamline your operations.FREE Ground Shipping on Online Orders of $249 or More*Never miss an R.S. Hughes email.Add solutions@rshughes.com to your address book.R.S. Hughes Co., Inc. | 1162 Sonora Ct. Sunnyvale, CA 94086
www.rshughes.com | 1-877-774-8443
by "R.S. Hughes" <solutions@rshughes.com> - 08:02 - 27 May 2026 -
Apple Statement Request: AAPLGA62000804729L
Accounts Receivable,
Apple is requesting a current Accounts Receivable statement (aging report) from TURNKEY PACKAGING SOLUTIONS LLC for all Apple accounts globally. Apple does not hold your customer account number on file and appreciates a full reporting of all accounts you have on file for Apple.
If you are receiving more than one request, Apple has you under multiple supplier names/accounts.
A complete Accounts Receivable statement(s) should include anything open on the account that hasn’t been cleared. This would include any credits, unapplied payments, as well as invoices. You can run the report as of today. No template will be provided (Excel file format preferred).
Please reply to this email with Statement(s) with reference AAPLGA62000804729L to help us correctly account for your response.The letter of authorization along with the Apple email contact is available upon request.
Thank you for your cooperation with our ongoing/routine review. Please continue to work with your normal AP process for invoicing, approvals, and payments.Dennis Nkrumah
by apreview@apple.apexanalytix.com - 06:12 - 27 May 2026 -
Invoice for Your Order PO26211758
InvoiceBilled toTURNPACK LLC
22425 S SCOTLAND CT STE 104
QUEEN CREEK AZ 85142Purchase Order PO26211758 Total $54.07 Invoice 65598665 Invoice Date 5/26/26 Payment Terms 2% 10, Net 30 Deduct $0.84 on merchandise if paid by 6/5/26. Shipped toAttention: Suite 104Turnpack LLC
22425 S Scotland CT Ste 104
Queen Creek AZ 85142Mail Payment to McMaster-Carr
PO Box 7690
Chicago IL 60680-7690Your Account 438808000 Christopher Berger placed this order.Line Product Ordered Shipped Balance Price Total 1 2841A149 Uncoated Expanded-Shank Carbide Drill Bit, 0.95 mm Bit Size 2 Each2 0 7.09 Each14.18 2 2488K33 Abrasion-Resistant Low-Profile Drive Roller, 3/8" Roller Diameter, 1/4" Roller Width, 55A (Medium) Blue 1 Each1 0 28.03 Each28.03 Merchandise 42.21 Shipping 11.86 Total $54.07 Packing List Shipped Weight Carrier Tracking 7942420-01 05/26/2026 1 lb FedEx 524157110670 Federal ID 36-1458720
by "McMaster-Carr" <invoice.reply@mcmaster.com> - 03:07 - 27 May 2026 -
Payment confirmation: Invoice #16065-(Precision Metal Mfg, LLC)
Manage payment 
You paid $128.03 to Precision Metal Mfg, LLC on 05/26/2026
Payment details Invoice no. 16065 Invoice amount $133.15 Total amount $128.03
Outstanding balance $5.12 Status Partially paid Payment method BUSINESS_CHECKING ******6317 Authorization ID 12a65ozuqx0m Please don't reply to this email, if you need any help regarding this message, please contact the business directly. Thank you, Precision Metal Mfg, LLC 4809872466 Invoice@azpmm.com 8150 E Germann Rd, Mesa, AZ, 85212-5306, USA 
No additional transfer fees or taxes apply. Intuit Payments Inc (IPI) processes payments as an agent of the business. Payments processed by IPI constitutes payment to the business and satisfies your obligation to pay the business, including in connection with any dispute or case, in law or equity. Money movement services are provided by IPI pursuant to IPI's licenses (NMLS #1098819, https://www.intuit.com/legal/licenses/payment-licenses). IPI is located at 2700 Coast Avenue, Mountain View, CA 94043, 1-888-536-4801.
Security | Privacy statement | Terms of Service
© 2026 Intuit Inc., All rights reserved. Trademarks.
2800 E. Commerce Center Place, Tucson, AZ 85706
by quickbooks@notification.intuit.com - 02:01 - 27 May 2026 -
FedEx Billing Online - Invoice Ready for Payment
You have a FedEx invoice ready for payment. Pay now. Your invoice is ready for payment Dear christopher berger, Your account ending in 6805 has a new invoice(s) from FedEx ready for payment. Invoice number: Invoice amount: 9-314-32717 67.18 Log in to FedEx® Billing Online to review and pay your invoices. Log In Thank you for your business, FedEx Note: Please do not use this email to submit payment. This email may not be used as a remittance notice. To pay your invoices, please visit FedEx Billing Online. ©2026 FedEx.The content of this message is protected by copyright and trademark laws under U.S. and international law.
Review our privacy policy. All rights reserved.
This message has been sent by an auto responder system. Please do not reply to this message.
ID ENS- 2356
by "BillingOnline" <BillingOnline@fedex.com> - 01:07 - 27 May 2026 -
Edmund Optics Order, PO# PO26211759, SO# 2683511
Thanks for ordering from Edmund Optics!
Edmund Optics Customer Support Team
custsvc@edmundoptics.com
PH: 800-363-1992
Edmund Optics Inc.
101 E. Gloucester Pike
Barrington , NJ 08007 US
This e-mail and any files transmitted with it are intended solely for the use of the addressee. This e-mail may contain confidential and/or legally privileged information. Any review, transmission, disclosure, copying, or any action taken or not taken, by other than the intended recipient, in reliance on the information, is prohibited. If you received this e-mail in error, notify the sender and delete this e-mail from your computer and network. In addition, please be advised that Edmund Optics reserves the right to monitor, access and review all messages, data and images transmitted through our e-mail system. By using our e-mail system, you consent to this monitoring.
This e-mail and any files transmitted with it are intended solely for the use of the addressee. This e-mail may contain confidential and/or legally privileged information. Any review, transmission, disclosure, copying, or any action taken or not taken, by other than the intended recipient, in reliance on the information, is prohibited. If you received this e-mail in error, notify the sender and delete this e-mail from your computer and network. In addition, please be advised that Edmund Optics reserves the right to monitor, access and review all messages, data and images transmitted through our e-mail system. By using our e-mail system, you consent to this monitoring.
by OrderTracking@edmundoptics.com - 10:21 - 26 May 2026 -
Payment confirmation: Invoice #18208-(HarshCo LLC)
Manage payment You paid $250.00 to HarshCo LLC on 05/26/2026
Payment details Invoice no. 18208 Invoice amount $250.00 Total amount $250.00
Status Paid Payment method Business checking *****6317 Authorization ID 16a67otuye7y Please don't reply to this email, if you need any help regarding this message, please contact the business directly. Thank you, HarshCo LLC 4809913630 www.harshcowaterjet.com | robbyglass@harshco.com 7442 E Butherus Dr, Scottsdale, AZ, 85260, US
No additional transfer fees or taxes apply. Intuit Payments Inc (IPI) processes payments as an agent of the business. Payments processed by IPI constitutes payment to the business and satisfies your obligation to pay the business, including in connection with any dispute or case, in law or equity. Money movement services are provided by IPI pursuant to IPI's licenses (NMLS #1098819, https://www.intuit.com/legal/licenses/payment-licenses). IPI is located at 2700 Coast Avenue, Mountain View, CA 94043, 1-888-536-4801.
Security | Privacy statement | Terms of Service
© 2026 Intuit Inc., All rights reserved. Trademarks.
2800 E. Commerce Center Place, Tucson, AZ 85706
by quickbooks@notification.intuit.com - 10:12 - 26 May 2026 -
Your Latest Cox Business Bill Is Here
View More. 
Your May Bill Is Now Available
Here's a quick overview of your bill. For full details, visit MyAccount. Your automatic payment will be applied on the due date. Bill Statement Details
Business Name: Turnpack, LLC Account Number: 001-8502-283051302 Billing Address: APT 104 22425 S SCOTLAND CT, QUEEN CREEK, AZ 85142-1056 New Charges Due: $148.00 New Charges Due by: June 17, 2026 Total Due: $148.00 * * Good news! Since you're enrolled in EasyPay, your payment will be automatically paid on your due date.
* The balance due was accurate at the time your bill was generated, and does not reflect any adjustments, or payments (immediate or scheduled) that may have posted after your bill was processed. To see your current balance due, please log in to MyAccount.Need Help?
Text us at
36009
Chat live
24/7
Call us at
866‑272‑5777
Find us on 
Note: This notification has also been sent to cberger@turnpack.com,info@turnpack.com.
This email was sent from a notification‑only address that cannot accept incoming email. Please do not reply to this message. Please add cox@businesscontact.cox.com to your address book to ensure you receive future emails.
©2026 Cox Communications, Inc. All rights reserved.
Communication sent by:
Cox Communications, Inc.
6205-B Peachtree Dunwoody Road
Atlanta, GA 30328
MyAccount | Email Preferences | Privacy
by "Cox Business" <Cox@businesscontact.cox.com> - 09:53 - 26 May 2026 -
Web Order No. E-2382294
Dear Christopher Berger,
Thank you for your order with www.edmundoptics.com!
Below is a summary of your web order details.Customers can view full details of their orders at:
https://www.edmundoptics.com/Account/OrderHistory/Print/557087Product Items (1): Price Qty Total 1X, 65mm WD, In-Line CompactTL™ Telecentric Lens (#67-312) $1,150.00 1 $1,150.00 Items (1): $1,150.00 Subtotal $1,150.00 Estimated Shipping $33.99 Tax Exempt Total $1,183.99
Shipping Address
Turnpack
Christopher Berger
22425 S Scotland Ct
Suite 104
Queen Creek , AZ, 85142
United States
Phone: 4803311878
Email: Info@turnpack.com
Billing Address
Turnpack
Christopher Berger
22425 S Scotland Ct
Suite 104
Queen Creek, AZ, 85142
United States
Phone: 4803311878
Email: Info@turnpack.com
Shipping Method
Priority: 2-3 Business Days
Payment Method
Credit Card ending in 1004
Tax Certificates: Resale certificate
Purchase Order Reference No.: PO26211759
Can't find what you need? Contact us today!
1-800-363-1992
101 EAST GLOUCESTER PIKE | P.O BOX 9000
BARRINGTON, NJ 08007-1380 USA
Email: sales@edmundoptics.com
This email reflects receipt of your order only. If products are unavailable or back-ordered, you will be notified by email or phone within 1 business day. Delivery times may vary depending upon the in-stock status of products. View our Terms and Conditions for additional information.
The Future Depends on Optics
This email was sent by:
Edmund Optics - 101 E Gloucester Pike, Barrington, NJ 08007-1331 USA
Tel: 1-800-363-1992
by "Web Order No. E-2382294" <sales@edmundoptics.com> - 09:53 - 26 May 2026 -
Confirmation for Your Order PO26211758
Thank you for your order. We will deliver your items on Thursday between 10 am and 12 pm.Confirmation
Delivery address
Turnpack LLC
22425 S Scotland CT Ste 104
Queen Creek AZ 85142
Attention: Suite 104Billing address
Turnpack LLC
22425 S Scotland CT Ste 104
Queen Creek AZ 85142Delivery method
UPS GroundOrder date
5/26/2026Payment method
InvoicePlaced by
Christopher BergerMcMaster-Carr number
7942420PO26211758 Delivers May 28, 10 am - 12 pm 1 Uncoated Expanded-Shank Carbide Drill Bit
0.95 mm Bit Size
2841A1492
each7.09
each$14.18 2 Abrasion-Resistant Low-Profile Drive Roller
3/8" Roller Diameter, 1/4" Roller Width, 55A (Medium) Blue
2488K331
each28.03
each$28.03 Merchandise 42.21 Shipping 11.86 Total $54.07 Your order is subject only to our terms and conditions, available at www.mcmaster.com or from our Sales Department. Phone: (562) 692-5911 Email: la.sales@mcmaster.com
by "McMaster-Carr" <la.sales@mcmaster.com> - 09:42 - 26 May 2026 -
Re: New Request for Quote submission from Turnpack
Sounds good!Best,IvanOn Tue, May 26, 2026 at 4:21 PM Info at Turnpack <info@turnpack.com> wrote:Ya but the other company is cheaper and no min. So i like them better lolRespectfully,
Lorena CarrilloOn Tue, May 26, 2026, 2:20 PM Ivan Arevalo <iarevalo@turnpack.com> wrote:This was the other company, Extramet, that shipped carbide rods with a 7-10 business day lead time. This was the company we were going to go with that involved getting an account made IF the china one did not work out.---------- Forwarded message ---------
From: Mike Douglas <mdouglas@extramet.net>
Date: Wed, May 20, 2026 at 5:05 PM
Subject: Re: New Request for Quote submission from Turnpack
To: Ivan Arevalo <iarevalo@turnpack.com>
Cc: Info at Turnpack <info@turnpack.com>, Jaime Mcbryar <jaime@extramet.net>
Hi Evan,
That’s great. The next step would be getting set you set up for your first order. First orders are always credit card purchases that process at time of shipment (including shipping cost), then after the first order we can set up credit terms for you. Once you send over the PO, Jaime, who I copied on this email, will contact you to set up the account and payment for the order. Let me know if you have any other questions and I look forward to working with you.
Thanks,
Mike DouglasExtramet Products
On May 20, 2026, at 7:40 PM, Ivan Arevalo <iarevalo@turnpack.com> wrote:
Hi Mike,
Sorry about the delayed response. This could work for us. How can we get started on the process of ordering, shipping, and receiving?
On Tue, May 12, 2026 at 11:25 AM Mike Douglas <mdouglas@extramet.net> wrote:
Good afternoon,
Thank you for reaching out to Extramet Products. Below is your quote for material. Let me know if you have any questions.
Quote#26056908 mm x 63.5 mmSolid ground rod with chamfer on one endGrade: 10%QTY Price Delivery100-249 $31.86ea 7-10 working days250-499 $31.32ea 7-10 working days500+ $30.78ea 7-10 working days
Thanks,
Mike DouglasExtramet Products
Get Outlook for Mac
From: noreply@thomasnotifications.com <noreply@thomasnotifications.com>
Date: Tuesday, May 12, 2026 at 12:57 PM
To: Info <info@extramet.net>
Subject: New Request for Quote submission from Turnpack
NameIvan ArevaloEmailPhone(480) 869-2308CompanyTurnpackTitleRFQ; Carbide blanksAdditional InformationHello ! Our company is seeking carbide blanks to be turned into end mills for precision machining.
We ask for 8mm diameter by 63.5mm length round blank rods that are 10% cobalt, Grounded, h6 tolerance, and chamfered on one end. These should also be made with virgin material. We plan to order a quantity of 130, but if larger quantities (200, 300, 400) can reduce total cost, we would like to see what options are available, thanks.
by Ivan Arevalo - 07:22 - 26 May 2026 -
RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Great, thanks, Jeff. Three-day weekends never suck. 😉
From: Galli, Jeff (US) <Jeff.Galli@Teledyne.com>
Sent: Tuesday, May 26, 2026 3:52 PM
To: Turnpack, LLC SO26201063 <catchall@turnpack.com>; Keith Chalman <keith@cti-rep.com>
Subject: RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert QuoteHi Chris and Keith,
Thanks for the quote. I will review it and organize my thoughts a bit and let you know if I have any questions by the end of the week.
Hope you enjoyed your long weekend!
Jeff Galli
Sr. Process Development EngineerTELEDYNE FLIR OEM
Upcoming out of office: May 14-18
Teledyne Confidential; Commercially Sensitive Business DataFrom: Chris Berger <info@turnpack.com>
Sent: Tuesday, May 26, 2026 7:23 AM
To: Jeff Galli <jeff.galli@teledyneflir.com>
Subject: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert QuoteExternal Email
Hi Jeff, Attached is the quote for the split p-part bonding inserts for the 3 products for 1 machine. Let me know if you have any questions. If [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏
SO26201063
$ 21,150.00
Expires on 06/21/2026
Hi Jeff,
Attached is the quote for the split p-part bonding inserts for the 3 products for 1 machine. Let me know if you have any questions.
If you intend to move forward it would be best if you could send us boats and possibly some parts as well just to make sure clearance is not going to be an issue.
Chris
Christopher BergerTurnpack — Efficiency Redefined Through Automation
by Chalman Technologies - 07:01 - 26 May 2026 -
RE: Turnpack, LLC Quotation (Ref SO26201063) - Datacon Bonding Insert Quote
Hi Chris and Keith,
Thanks for the quote. I will review it and organize my thoughts a bit and let you know if I have any questions by the end of the week.
Hope you enjoyed your long weekend!
Jeff Galli
Sr. Process Development EngineerTELEDYNE FLIR OEM
Upcoming out of office: May 14-18
Teledyne Confidential; Commercially Sensitive Business DataExternal Email
Hi Jeff, Attached is the quote for the split p-part bonding inserts for the 3 products for 1 machine. Let me know if you have any questions. If [...] ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏
SO26201063
$ 21,150.00
Expires on 06/21/2026
Hi Jeff,
Attached is the quote for the split p-part bonding inserts for the 3 products for 1 machine. Let me know if you have any questions.
If you intend to move forward it would be best if you could send us boats and possibly some parts as well just to make sure clearance is not going to be an issue.
Chris
Christopher BergerTurnpack — Efficiency Redefined Through Automation
by "Galli, Jeff (US)" <Jeff.Galli@Teledyne.com> - 06:56 - 26 May 2026 -
Your Daily Digest for Tue, 5/26 is ready to view
Informed Delivery
COMING TO YOU SOON
Hi, Chris!
You have 1 mailpiece(s) and 0 inbound package(s) arriving soon.
Tuesday
26 May20261
Mailpiece(s)
0
Package(s)
MAIL
View Dashboard Expected Today
1 item(s)
FROM: National Funding
There is one or more mailpieces for which we do not currently have an image that is included in today's mail.
PACKAGES
View Dashboard No packages are available to display. 
You may have more mail or packages than are shown in your Daily Digest. To check, go to your Dashboard.
Mail may arrive several days after you receive the notification. Please allow up to a week for delivery before reporting missing mail. Report missing mail.
*These images represent mail pieces that are sorted on USPS® automated equipment. Some of your mail may not be shown here.
You subscribed to this service with USPS® Product Technology Innovation, 475 L`Enfant Plaza SW, Washington, DC 20260.
If you no longer wish to receive daily email notifications, unsubscribe here.
If you need support, please visit user support for Informed Delivery®.
For more information about this service, please visit general information about Informed Delivery.
Copyright © 2026 United States Postal Service®. All Rights Reserved. The Eagle Logo and the trade dress of USPS® Packaging are among the many trademarks of the U.S. Postal Service®.
This is an automated email, please do not reply to this message. This message is for the designated recipient only and may contain privileged, proprietary, or otherwise private information. If you have received it in error, please delete. Any other use of the email by you is prohibited.
by "USPS Informed Delivery" <USPSInformeddelivery@email.informeddelivery.usps.com> - 06:17 - 26 May 2026
Learn more about your mail ❯
Share via: